03 angle modulation

19
Angle Modulation 1 06/06/22 H62TLC_RA

Upload: ann-moa

Post on 04-Sep-2014

122 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: 03 Angle Modulation

Angle Modulation

107/04/23 H62TLC_RA

Page 2: 03 Angle Modulation

Advantages and Disadvantages (over AM)

– Advantages • good fidelity• good noise immunity• More efficient use of power

– Disadvantages• BW requirement is higher for FM

2

SNR is good

07/04/23 H62TLC_RA

Page 3: 03 Angle Modulation

• Applications of FM– TV sound signal– 2 way radio (fixed and mobile)– Satellite and cellular communication

• Applications of PM– Extensively used in data communication– Used as an intermediate step in FM signal

generation

307/04/23 H62TLC_RA

Page 4: 03 Angle Modulation

• Frequency Modulation (FM) and Phase Modulation (PM) are grouped as angle modulation.

• Consider the simple sinewave

where gives the instantaneous phase

• A change in frequency can cause a change in phase. Therefore direct FM is indirect PM and direct PM is indirect FM.

• Note also that

407/04/23 H62TLC_RA

Page 5: 03 Angle Modulation

Frequency Modulation (FM)

• For FM, the carrier’s instantaneous frequency deviation from its unmodulated (resting) value varies in proportion to the instantaneous amplitude of the modulating signal.

• Let the modulating signal be a sine waveem(t) =Em sin mt

• The frequency deviation Δf is proportional to the amplitude of the modulating signal, therefore: fFM(t) = fc + f

fFM(t) = fc + kf em(t) where fFM(t) is the frequency of the modulated signal, fc is the unmodulated carrier frequency

507/04/23 H62TLC_RA

Page 6: 03 Angle Modulation

FM – frequency deviation Frequency deviation proportional to the amplitude of the modulating signal.

Then fFM(t) = fc + kf Em sin mt and kf Em = = peak frequency deviation in Hz hence fFM(t) = fc + sin mt

mf ekf

6

kf (Hz/V)= deviation sensitivity of the modulator

em = modulating signal amplitude

f = instantaneous frequency deviation

07/04/23 H62TLC_RA

Page 7: 03 Angle Modulation

Square wave modulating a sine

wave carrier

7

Modulated signal in time domain

Change in the carrier’s frequency over time according to the amplitude of the modulating signal

Change in the carrier’s phase over time.

07/04/23 H62TLC_RA

Page 8: 03 Angle Modulation

807/04/23 H62TLC_RA

Page 9: 03 Angle Modulation

FM – modulation index

• The FM’s modulation index is defined as, mf = /fm

• Unlike AM , mf can be > 1; there are no limits• Since mf = /fm thus

fFM(t) = fc + mf fm sin mt

• Example 1An FM modulator has kf =30kHz/V and operates at a carrier frequency of 175 MHz. Determine the output frequency for an instantaneous value of the modulating signal equal to 150mV.

907/04/23 H62TLC_RA

Page 10: 03 Angle Modulation

Phase modulation • In PM the phase shift of the carrier is proportional to the

instantaneous amplitude of the modulating signal.m(t)= Ec cos (ct + kpEmcos(mt))

• Similar to FM kp = /em

kp - phase deviation sensitivity, rad/V - phase deviation in radiansem – modulating signal amplitude, volts

• And mp = = kpEm

• where mp is the phase modulation index

1007/04/23 H62TLC_RA

Page 11: 03 Angle Modulation

Example 2

The signal vm(t) = 2 cos(22000t) is to be transmitted.

(i) If the signal is to be FM, determine the peak frequency deviation and the modulation index given that kf = 5 kHz/V.

(ii) If the signal is to be PM, determine the peak phase deviation given kp = 2.5 rad/V

1107/04/23 H62TLC_RA

Page 12: 03 Angle Modulation

Angle Modulation Spectrum

• FM and PM have similar equation of the form:V(t) = A sin (ct + m sin mt)where m can be mf or mp

When elaborated, V(t) is a series of sinusoids:-

where v(t) = instantaneous amplitude of modulated carrier A = peak amplitude of the carrier Jn = solution to the nth order Bessel function for a given

modulation index (see Bessel table handout)

1207/04/23 H62TLC_RA

Page 13: 03 Angle Modulation

An FM wave contains an infinite number of sideband componentsSidebands are separated from the carrier by multiples of the fm, with

decreasing amplitude as the distance from the carrier frequency increases.

Sidebands with amplitude <1% of the total signal voltage are usually ignored.

13

Rela

tive

ampl

itude

07/04/23 H62TLC_RA

Page 14: 03 Angle Modulation

• If the unmodulated carrier has an amplitude of 1V, J0 represents the amplitude of the carrier frequency (resting frequency).

• Total power in FM signal is distributed in the carrier and sideband components.

• Total signal voltage and power does not change with modulation.

1407/04/23 H62TLC_RA

Page 15: 03 Angle Modulation

• For unmodulated carrier =

• For FM (modulated carrier)

• Where PT = total rms power of FM wave Pjn = rms power in carrier

Pjn = rms power in first, second ….nth set of sidebands Vjn = rms voltage of carrier, first, second…..nth sidebands.

RV

RV

RV

RV

PPPPP

n

N

JJJJ

JJJJT

2222 2.......

22

......

210

210

RV

P rmscT

2

1507/04/23 H62TLC_RA

Page 16: 03 Angle Modulation

Angle Mod. Bandwidth

• 2 methods(i) With help of the Bessel’s frequency spectrum

B = 2( n x fm)• n is the number of significant sideband components

(ii) Carson’s rule (an approximation – BW for about 98% of total power)

B = 2( + fm)• δ is the peak frequency deviation • fm is the modulating frequency

16

Bandwidth

07/04/23 H62TLC_RA

Page 17: 03 Angle Modulation

Example 3An FM modulator with a modulation index of m=1 modulates the message signal vm = 2sin(2000t) and a carrier signal of Vc = 10sin(106t). The load resistance is 50.

i) How many pairs of significant sidebands are transmitted? ii) Determine the sidebands’ amplitude. iii) Sketch the output frequency spectrum, showing their relative

amplitudesiv) Determine the unmodulated carrier power. v) Determine the total power in the modulated wave.

1707/04/23 H62TLC_RA

Page 18: 03 Angle Modulation

Narrowband & Wideband FM

• Theoretically there are no limitations to the m or of the FM signal.• In practice, a trade-off found is between SNR and BW. A good SNR

requires large BW. BW are usually limited by regulations and also Rx design limitations

• With m<1, bandwidth of FM = bandwidth of AM. This is narrow-band FM (NBFM). Eg voice transmission.

• With m>10, we get wideband FM – commercial FM radio, television.

1807/04/23 H62TLC_RA

Page 19: 03 Angle Modulation

Note:

• All material in this slide has been compiled/sourced/extracted from various sources; electronic and non electronic media for the purpose of teaching.

1907/04/23 H62TLC_RA