02 lte guide
TRANSCRIPT
LTE Guide for RL50
System Module • BB processing
• Telecom & RRM
• O&M
• synchronization
• optional FPFD power sub-module FSMF
• power distribution with fuses included in FSME
• IP Transport included with FSMF
Flexi Multiradio BTS Main Modules
Optional Transmission sub-module
• FTIF optional with FSMF
• FSME Ethernet sub-module FTIB/FTLB
• Gbit/s Ethernet
Optional
GPS antenna&receiver
Optional Cabinets and other site Accessories
• Mini cabinets FMSx
• Indoor FCIA
• Outdoor FCOA
• OVP FSEC
• External Alarm box FSEB (12 alarms)
Common existing
Flexi Multiradio site items
Optional Power Modules • FPMA (& FPAA & FPBA)
• FPRA
• 24 V DC
• FPFC/FPFD/FPFI with FSMF
Optional Antenna line co-siting units • Smart Diplexers
• Multiradio Combiners
• MHA/TMA
RF Module 240 W • 3 TX or 6 TX / 6 RX
• 3 x 80 W
FXEB
FXDB,
FRGT
RRH 120 W • 2 TX/2RX
• 4TX/4RX
• 2 x 60 W
FHDB
FHEB
• FPFC power distribution sub-module is optional separate Item for FSMF
Flexi Multimode System Module HW Item
Casing
• needed for air cooling and stack installation
• Optional with new RF Modules
Module Core IP65 with connector
rubber gaskets
• optional EMHA for new RF Modules includes 3U Casing and Front and back Covers, or
• optional FMCA has Front and back Covers (SM and old RF Modules) • For wind driven rain (WDR) protection and visual outlook
• FTIF transport sub-module is optional separate Item for FSMF
Flexi Multiradio RF Module HW Package (SP)
RF Module – new Multiradio and GSM RF band RF Modules (FXxx) package don’t include casing.
new RF Modules (3 x 80 W or 6 x 40 W) don’t include
– 2 meter power cable (IP65 protected outdoor for 48 V DC)
– 2 meter optical cable (IP65 protected outdoor multimode system cable)
– SFPs
4.) separate SFP optical transceivers
(SFP = Small Form factor Pluggable)
1.) 2.)
3.)
SFP IP rating = IP55 with connector rubber gaskets
Separate DC cable
e.g. 2/4 m
Separate optical cable
e.g. 2/4…200 m
Included in Package Casing needed for installation in
System Modules comment
Casing and
cover Kit
Floor/Wall/
Pole FCIA FCOA
Shield
FMSA/B &
IRSA
Power
cabinet
(e.g. Delta)
DC cable
2 m
(2xmulti
beam)
Multim
ode
fiber 2
m
2 SFP
(multi
mode)
FSME casing included FMCA optio n/a n/a n/a n/a n/a n n n
FSMF casing included FMCA optio n/a n/a n/a n/a n/a n n n
RF Modules
FRGP 2100 3x60 W casing included FMCA optio n/a n/a n/a n/a n/a y y y
FRHA 2600 3x60 W casing included FMCA optio n/a n/a n/a n/a n/a y y y
FRIE 1.7/2.1 3x60 W casing included FMCA optio n/a n/a n/a n/a n/a y y y
FRMA/D 800EU 3x60 W casing included FMCA optio n/a n/a n/a n/a n/a y y y
FXCA 850 3x60 W casing optional EMHA y n n y n y y y
FXDA 900 3x60 W casing optional EMHA y n n y n y y y
FXEA 1800 3x60 W casing optional EMHA y n n y n y y y
FXFA/B 1900 3x60 W casing optional EMHA y n n y n y y y
FRGS 2100 3x60 W casing optional EMHA y n n y n y y y
FXCB 850 3x80 W casing optional EMHA y n n y n n n n
FXDB 900 3x80 W casing optional EMHA y n n y n n n n
FXEB 1800 3x80 W casing optional EMHA y n n y n n n n
FXFC 1900 3x80 W casing optional EMHA y n n y n n n n
FRGT 2100 3x80 W casing optional EMHA y n n y n n n n
FRHC/F 2600 6x40 W casing optional EMHA y n n y n n n n
FRMC 800EU 6x40 W casing optional EMHA y n n y n n n n
FRPA/B 700 APT 6x40 W casing optional EMHA y n n y n n n n
ALL RRHs (except
WCDMA FRGG) xx sunshield include N/A
only pole
/wall N/A N/A N/A N/A n n n
Power modules
FPDA (24->48 VDC) always with casing FMCB n/a n/a n/a n/a n/a
FPMA (BBU) always with casing FMCA n/a n/a n/a n/a n/a
FPRA (rectifier) always with casing FMCA n/a n/a n/a n/a n/a
LTE Module Item package options
Flexi Multiradio 10 and Multimode System Modules
Flexi Multiradio 10 System Module (rel3 HW):
• 472181A FSMF System Module
• 472182A FBBA Baseband extension sub-module
• (optional)
• 472301A FPFD Power Distribution
• sub-module (optional)
FSME
Optical RP3
to RF Units
3 HU
DC power distribution
sub-module to RF Units Transmission sub-module
BTS site external alarms and controls
3 x 100 & 1000 BaseT Ethernet
External synchronization input and output
PWR PWR PWR PWR
• 25 liters
• 3 U high
• < 25 kg (depends of optional sub-modules)
• IP65, -35 … +55 °C
slot for 2nd FBBA
FPFD optional power
distribution sub-module
FTIF optional Transport
sub-module
FSMF + FBBA
PWR
in
PWR
out
IP
TR
PWR
in
PWR
out BB
bus
BB
bus
Flexi Multiradio System Module FSMF with FBBA Flexi Multimode System Module FSME (rel2 HW)
Future proof : The only true WCDMA or LTE capable Multimode Solution
• FSMF + FBBA provide capacity for up to 6 cells with 15 or 20 MHz bandwidth with 2TX MIMO and 2RX
FSMF (/FSME)
Capacities with 2TX MIMO and 2RX
Bandwidth MHz 5 10 15 20
FSMF (or FSME) Capacity
6 cells 6 cells 3 cells 3 cells
FSMF + FBBA Capacity 12 cells 12 cells 6 cells 6 cells
with optional FMCA covers
Flexi Multiradio System Module FSMF
Feature ID: LTE947 & LTE621
FSMF core
slot for FBBA
FPFD optional Power
Distribution sub-module
optional Transport
sub-module
slot for FBBA
• Flexi MR 10 System Module Product Overview (HW)
• connectors, cabling etc.
• integrated BB, BTS Control and IP transport
• optional BB extension sub-module FBBA (in RL50)
• optional Transport sub-module FTIF
• optional integrated one site DC power input with fuses and distribution to RF
units (sub-module FPFD)
• 4 x 6 Gbps optical OBSAI RP3-01 interfaces to RF Units +1 in each FBBA
• BTS site external alarms and controls
• 100 & 1000 BaseT and Optical Ethernet (depending on configuration)
• Ext Synchronization out and input
• Redundant changeable integrated fans
FSMF HW item includes casing and fans
RL40
Double System Module capacity with one FBBA
• FBBA supports
• 3 cells @ 15 or 20 MHz with 2TX and 2RX, or
• 6 cells @ 5 or 10 MHz with 2TX and 2RX, or
• 3 cells @ 5 or 10 MHz with 4TX and/or 4RX
• 5 optical RP3 ports available to RF units
• 4 in FSMF + 1 in FBBA
• Example configurations FSMF + one FBBA HW can support, e.g.
• 6 cells @ 15 or 20 MHz with 2TX and 2RX, or
• 3 cells @ 15 or 20 MHz with 4TX and/or 4RX diversity,
or
• 6 cells @ 5 or 10 MHz with 4TX and/or 4RX diversity
• Separate SW licenses needed for 4x2 TX MIMO and 4RX SW features
LTE1247
Flexi Multiradio 10 BTS
Capacity Extension sub-module FBBA
RL50
FSMF
FBBA slot for 2nd FBBA
optional Power
Distribution sub-module
optional Transport
sub-module
Flexi RF Module Triple 60 / 80 W
Flexi RF Module with 3 x 60 or 80 W (at the antenna connector) offers the following key benefits:
• The most cost optimized up to 3-sector configuration (1TX per sector)
– 1-omni, 1+1 & 1+1+1 @ 60 / 80 W
• The most powerful Remote Radio :
– 60 + 60 or 80 +80 W 2TX MIMO for one sector
• Timely optimimized capacity investment with 2TX MIMO upgrade option by adding second RF Module :
– 1+1 or 1+1+1 @ 60 + 60 or 80 +80 W 2TX MIMO
• Can be installed to more demanding sites due to IP65 class and up to +55°C operational temperature range
• Support of ex-Siemens TMAs (at 2100 MHz band)
FRHA 2600
FRMA 800
FRGP 2100
FXEA 1800
FXEB*2 1800
FRMD 800
FRGT*2 2100
FXDA 900
FXDB*2 900
• 25 liters
• 3 U high
• < 25 kg
• IP65
• -35 … +55 °C
• picture with optional FMCA
covers/EMHA casing
* FRBB 3 x 40 W at antenna connectors
*2 6 Gbps SFP support with FSMF
RL50
Flexi RF Module 6TX 6 x 40 W
Flexi RF Module with 6 x 40 W (at the antenna connectors) offers the following key benefits:
• The most cost optimized up to 3-sector configuration (2TX per sector)
– 1-omni, 1+1 & 1+1+1 @ 40+40 W
• The most powerful Remote Radio 4TX:
– 4 x 40 W 4TX MIMO for one sector
• Optional timely optimimized site capacity investment upgrade by adding second RF Module 6TX:
– to 3-sector 4TX MIMO 1+1+1 @ 4 x 40 W
– to 6-sector 2TX MIMO 6 x 1 @ 40 + 40 W
• Can be installed to more demanding sites due to IP65 class and up to +55°C operational temperature range
FRMC*2 800
FRHC*2 2600
• 25 liters
• 3 U high
• 25 kg
• IP65
• -35 … +55 °C
• picture with optional FMCA
covers/EMHA casing
*2 6 Gbps SFP support with FSMF
RL50
Flexi Multiradio RRH 2TX 40+40/60+60 W
• For one sector deployment with 2-way RX diversity
• 2 MCPA per RRH
• 2 x 40 W output power per RRH (2x30 W FRLB)
• 2 x 60 W FHDB
• 2 x 60 W FHEB
• Active bandwidth software tunable for 20 MHz
• Natural Cooling (no fans)
• 2 RP3 01 OBSAI Interfaces
• 2 TX/RX Antenna Interfaces
• 48 V DC input, Integrated Class 2 OVP
• External Alarm Interface
X
LNA
Du
ple
xer
MCPA TX
RX main
LNA
Du
ple
xer
MCPA TX
RX main
Tx2/RX2
Tx1/RX1
RRH 2TX
• 20 liters*
• 17 kg*
• IP65
• -35 … +50 °C
FRMB 800EU
FRHB 2600
FRGQ 2100
FHDB*2 900
FHEB*2 1800
* Size and weight vary according to variant
*2 6 Gbps SFP support with FSMF
RL50
High capacity 4TX and excellent coverage with 4RX
• FRHE Flexi RRH 4TX 2600 4 x 30 W, lowest 55 MHz filter variant
• 4-RX diversity (MRC or IRC separate SW feature)
• Optimized for single sector deployment and 4TX MIMO
• Convectional cooling
• one 4-port antenna needed or two X pol antennas
• 6 Gbps SFP support with FSMF
Flexi RRH 4TX
Tx1 Tx2 TX3 TX4
30 30 30 30 W
RX1 RX2 RX3 RX4
One sector *At constant high temperature and high traffic load at 30W mode Pout might be limited - indoors 45 °C
FRHE*2 2600
• 26 liters, 25 kg
• IP65
• -35 to +55 °C*
RL50
The most optimized 3-sector 2TX MIMO BTS site
Flexi RF Module 6TX RL50
Sector 1, 7/16 connector
40 W/ DivRx 40 W / Rx
Sector 2
40 W/ DivRx 40 W / Rx
Sector 3
40 W/ DivRx 40 W / Rx
RET 8-Pin Male Connector, Circular
3 x RP3 optical connector
EAC
MDR36
DC IN LED Unit & Fan status GND
• FRHC 2600 lowest 55 MHz of 70 MHz full band
• FRMC 800EU highest 20 MHz of 30 MHz full band
• 1+1+1 2TX MIMO BTS with only one RF Module
• 6 x 40 W
• improved OPEX with lower power consumption
• optional site extension to 6 sector 2TX or 3 sector 4TX with 2nd RFM 6TX
• 6 Gbps optical link with FSMF
• Dimensions the same as with Flexi RF Module
• 3U Module, 25 liters, 25 kg
• IP65
• -35 to +55 °C
Flexi 3-Sector RF Module 3 x 80 W
Capacity and coverage boost with SW definable radio
• FXEB 1800 (in RL40)
• FXDB 900
• FRGT 2100
• Industry leading Integration level
–3 x 80 W at the antenna connectors
–35 MHz instantaneous TX bandwidth (FXEB)
–60 MHz RX bandwidth (75 MHz full band RF filter)
–Power consumption improvement
–External RET support
• e.g. GSM 4+4+4 @ 20 W and LTE 40+40 W 2TX MIMO with
two RF Modules
• RF Sharing between WCDMA/GSM and LTE defined by SW
• 6 Gbps optical link with FSMF
RL50
Sector 1
DivRx Tx80W / Rx
Sector 2
DivRx Tx80W / Rx
Sector 3
DivRx Tx80W / Rx
Sector 1
Rx Out
3 x RP3 optical connector
EAC
RJ45
DC IN
LED Unit & Fan status GND
RET 8-Pin Male Connector, Circular
• RRH and 3-sector RF Modules support LTE and GSM in concurrent mode operation
• Common Multi Carrier Power Amplifier (MCPA) is used to transmit GSM and LTE
- RF output power is flexibly shared between GSM and LTE
- No external combining needed, reduced complexity for the antenna system
RF Sharing GSM-LTE
GSM and LTE share the same Radio Module
For example 3 GSM TRX and
1 LTE carrier per shared MCPA
f2 10 MHz
LTE f1 f3
Multimode System Module LTE SW
GSM/ LTE RF Module
Flexi Multiradio BTS
GSM/EDGE System Module
GSM-LTE concurrent mode
Feature ID: LTE447
↑ Power and control to the GPS receiver
↓ PPS signal to BTS System Module
Flexi BTS Synchronization with GPS (optional) • 472748A FYGB GNSS Antenna Kit
• 471605A FYMA GPS Mounting Kit
• 471606A FYHA GPS Cable Set 30m for FSME , or
• 471653A FYHB GPS Cable Set 100m for FSME
• 472510A FTSE GPS cable assembly 30m for FSMF, or
• 472577A FTSH GPS cable assembly 100m for FSMF
• 471822A FYEA GPS Surge Protector Kit (optional)
• GPS used as the source for frequency and time synchronization
• Note other synchronization options :
– 2M/10M clock from existing BTS
– PDH (e.g. via E1/T1, e.g. from co-located existing BTS)
– Synchronous Ethernet
– IEEE1588v2, Timing over Packet (ToP over Ethernet)
• Note System Module contains an oven controlled oscillator (OCXO), which provides a highly stable clock even if the GPS receiver fails or GPS signal is temporarily unavailable
• The GPS antenna with integrated receiver (FYGA) has to be installed outside for satellite visibility and is directly connected to the MDR-26 Sync interface of the System Module
• 12 V DC power for the receiver is supplied through the combined power/data cable (FYHA up to 100 m, FYHB 30 m)
• FYEA Provides optional Surge protection 20 kA 8/20 µs (GR 1089 or IEEE Std C62.41.2-2002)
* See available cables in cable section
FYGB + mounting kit FYMA
FYHA or FYHB cable for FSME
FTSE or FTSH cable for FSMF
FYEA GPS Surge Protector
Kit (optional)
System Module
Flexi Multiradio BTS
Supported LTE Configurations
Intra Band Dual carrier with one RF unit
• Both carriers/cells have the same BW
• i.e. 10 + 10 MHz or 20 + 20 MHz
• total supported BW according to each RF unit BW
Example basic carrier configurations:
• 2+2+2 2TX MIMO 2RX with two RF Modules
• 2+2+2 2TX MIMO 2RX with three RF Modules or
three RRHs (2TX or RRH 4TX with two antenna
feeders used)
• 6*1 2TX 2RX with three RRHs 4TX (four feeders used per
each RRH 4TX)
LTE471
Dual Carrier operation within one RF band RL50
RRH 4TX 4RX
max RF BW depends on RF HW unit
TX1
RX1
10 MHz
TX2
RX2
10 MHz
10 MHz
TX3
RX3
10 MHz
TX4
RX4
Carrier1 Carrier2
S1 & X2 Transport
FSMF
System Module
One example configuration shown
Uplink coverage and throughput gain
• Diversity reception of 4 uplink signals
• Typically 3 dB additional diversity gain
• Feeders can be avoided with Flexi BTS
feederless site
• MIMO can be supported with the same
configuration
• RRH 4TX supports 4RX diversity (with
LTE72 or LTE980)
• Note RF sharing with 2-way RX in RL50
LTE72 (MRC), LTE 980 (IRC)
4-Way RX Diversity RL50
Tx1/RX1
RX3 for 4way diversity
TX2/RX2 for 2way
diversity
RX4 for 4way diversity
1-sector RF Module (3TX or 6TX) configuration
Tx1/RX1
RX3 for 4way diversity
RX4 for 4way diversity
TX2/RX2 for 2way
diversity
3-sector RF Module (3TX or 6TX) configuration
LTE 2TX MIMO / 2RX basic configurations with RRH 2TX
RL50
System Module 2TX MIMO 2RX Configuration
BW
[MHz]
Output [W] per sector at antenna connector
# RRH 2TX (or 4TX) units
FSMF 1 omni max 20 2x (20/40/60) 1 x RRH
FSMF 1 + 1 max 20 2x (20/40/60) 2 x RRH
FSMF 1+1+1 max 20 2x (20/40/60) 3 x RRH
FSMF 1+1+1+1 5 or 10 2x (20/40/60) 4 x RRH
FSMF+FBBA 1+1+1+1 15 or 20 2x (20/40/60) 4 x RRH
FSMF 6x1 5 or 10 2x (20/40/60) 6 x RRH (chained)
FSMF+FBBA 6x1 15 or 20 2x (20/40/60) 6 x RRH*1
(in 3 chains)
FSMF+FBBA 12x1 or
2 x ( 6x1) 5 or 10 2x (20/40/60)
12 x RRH*2
(in 3 chains)
*2) Requires at least two 6 Gbps RRHs per each chain
*1) Requires at least one 6 Gbps RRH per each chain
LTE 4TX MIMO and/or 4RX basic configurations with RRH 4TX
RL50
System Module 4TX MIMO and/or 4RX Configuration
BW
[MHz]
Output [W] per sector at antenna connector
# RRH 4TX units
FSMF 1 omni max 20 4x (20/30) 1 x RRH
FSMF 1 + 1 5 or 10 4x (20/30) 2 x RRH
FSMF 1+1+1 5 or 10 4x (20/30) 3 x RRH
FSMF+FBBA 1 + 1 15 or 20 4x (20/30) 2 x RRH
FSMF+FBBA 1+1+1 15 or 20 4x (20/30) 3 x RRH
Flexi Multiradio BTS, LTE Integrated Transport - Transport HW sub-modules and cables - Transport ASW SW features
Flexi Multiradio 10 BTS: FSMF
Optimized for Ethernet Transport
Flexi Multiradio System Module Outdoor is optimized for Ethernet Transport and supports the following integrated Transport functions (without the optional Transport Sub-Module)
– 1x 100/1000 Base-T Ethernet port
– 1x optional optical SFP (availability configuration dependent)
– S1/X2 over integrated Ethernet interface(s)
– Ethernet based chaining and switching across up to 2 interfaces
– IEEE1588-2008, Synchronous Ethernet, 1PPS and 2.048MHz 1)
– High-capacity IPsec, HW capability 2 Gbit/s DL+UL
Optional Transport Sub-Module further extends the Transport capabilities of Flexi Multiradio System Module
1x 100/1000Base-T Ethernet
port, dedicated for Transport
1x optional optical SFP,
available for Transport only
if not used for RP3-01
Optional Transport Sub-Module
1) Only 1PPS can be used for synchronization in LTE TDD RL25TD
FTIF Eth+E1/T1/JT1 for Flexi Multiradio 10 BTS FSMF
Support of TDM interfaces and extended Ethernet connectivity
• Optional Transport Sub-Module FTIF extends capabilities of Flexi Multiradio 10 System Module by
– 2x Combo Ethernet ports supporting following combinations
▪ 2x 1000/100/10BaseT or
▪ 2x optional optical GE SFP or
▪ 1x 1000/100/10BaseT and 1x optional optical GE SFP
– 8x E1/T1/JT1 (twisted pair)
– Supporting use case that require TDM interface is synchronization propagation via PDH
– Ethernet Switching across up to 3 interfaces (by System Module)
– Synchronization Hub function using Synchronous Ethernet as input
• Flexi Multiradio System Module and FTIF build a single logical Transport node
2 x Combo Ports 4 x ”RJ48C-style” ports,
2 x E1/T1/JT1 each
FSMF and FSME BTS site transport solution use case example
• Mix of System modules FSME and FSMF on one site is possible as well which form logically two eNBs
• Zero footprint transport solution on site • FTIB or FTLB present in FSME
• Interconnection of system e.g. 1000BaseT
• FSME: Traffic aggregation using LTE649 QoS aware Ethernet switching
• FSME is connected to the backhaul network
• Synchronization options Many options possible depending on BTS site and backhaul connections
• 2 * ToP clients (no FTSF cable required)
or
• FSME input options: 2.048 Mhz, PDH line, GPS (1 PPS), ToP, SynchE + LTE612 Synchronization hub:
1. 2.048 Mhz output to FSMF (FTSG synch cable required)
2. PDH line output to FSMF (FTIF required + PDH cable required)
3. 1 PPS output to FSMF (1 PPS GPS input required on FSME + FTSG sync cable required)
Shown example: FSME using ToP, 2.048 Mhz output to FSMF
Optical SFP (Ethernet)
Electrical Ethernet interface
TDM interfaces
Synchronization I/O
FSME GE GE GE
FSMF GE GE
IP / Ethernet
backhaul network
FT
SG
syn
c
ca
ble
Cables and SFP & spare parts
• List of most common cables
• Flexi Transport cables
• Flexi fibers
• Flexi SFPs
• Flexi DC cables
• Flexi Synchronization Cables
• Flexi GPS feeding Cables
• Flexi EAC Cables
• Flexi other cables
• FODA Flexi Fiber Optic Distribution Unit
Flexi MR BTS Transmission Cables OD (Outdoor) cable for transport module sales items
SI SI Name Length
[m]
For Remarks
470312A FTCA OD CABLE RJ48C - TQ-M/0 120ohm 5 m 5 FTPB,FTIA RJ48C - TQ, 1xE1
470309A FTCB OD CABLE RJ48C 120ohm 15 m 15 FTPB,FTIA RJ48C - open end, 1xE1
471713A FTCV OD CABLE RJ48C 120ohm 30 m 30 FTPB,FTIA RJ48C - open end, 1xE1
471714A FTCX OD CABLE RJ48C 120ohm 50 m 50 FTPB,FTIA RJ48C - open end, 1xE1
470311A FTCH OD CABLE LC SM 1310 15 m 15 FTOA LC dublex - LC dublex Singlemode fiber
(need FOSA sfp units)
471391A FTCJ OD cable TNC-F/0-TNC M/0 50 ohm 2.5 m 2.5 FTFA TNC male - TNC female Flexbus
471408A FTCR OD CABLE RJ45 CAT5E 15 m 15 FTIA, FTJA RJ 45 - open end, 1xEthernet
471548A FTCP OD CABLE MDR-68 100ohm 30M for FTHA 30 FTHA MDR 68 - MDR 68
471717A FTCS OD CABLE RJ45 CAT5E 30 m 30 FTIA, FTJA RJ 45 - open end, 1xEthernet
471718A FTCT OD CABLE RJ45 CAT5E 50 m 50 FTIA, FTJA RJ 45 - open end, 1xEthernet
471392A FTCM OD Adapter Cable RJ48-C 120 ohm 2.5 FMUA&FMUB with FTPB
or FTIA
RJ48C male - RJ48C female (IP seal on
male side)
471393A FTCN OD Adapter Cable SMB 75 ohm 2.5 FMUA&FMUB with FTEB
or FTJA
SMB - SMB bulkhead (IP seal on SMB
side)
471394A FTCO OD Adapter Cable TNC 2.5 FMUA&FMUB with FTFA TNC - TNC bulkhead (no ip seal)
472427A FTCY OD Cable RJ48C CAT7 15m 15 m FTIF RJ48C (IP) – open end
Single mode fibers
SI SI Name Lengt
h [m]
For Remarks
SINGLE MODE 90-90
472607A FOSR Flexi System fiber SM 4m 4
SM-RFM/RRH
LC duplex 90° left IP – LC duplex 90° left IP, SM SM/RF-FODA
472867A FSOP Flexi SM fiber 90-90 10m 10 SM-RFM/RRH LC duplex 90° left IP – LC duplex 90° left IP, SM
472868A FSOS Flexi SM fiber 90-90 25m 25 SM-RFM/RRH LC duplex 90° left IP – LC duplex 90° left IP, SM
SINGLE MODE fibers 0-90
472865A FSOM Flexi SM fiber 0-90 2m 2 SM – RRH
LC Duplex 0° IP - LC duplex 90° left IP, SM
472866A FSON Flexi SM fiber 0-90 5m 5 SM – RRH
LC Duplex 0° IP - LC duplex 90° left IP, SM
472067A
FSOH Flexi RRH System Fibre SM
10m
10 SM – RRH LC Duplex 0° IP - LC duplex 90° left IP, SM
472069A
FSOL Flexi RRH System Fibre SM
50m
50 SM - RRH LC Duplex 0° IP - LC duplex 90° left IP, SM
472070A
FSOO Flexi RRH System Fibre SM
110m
110 SM - RRH LC Duplex 0° IP - LC duplex 90° left IP, SM
472068A
FSOQ Flexi RRH System Fibre SM
200m
200 SM - RRH LC Duplex 0° IP - LC duplex 90° left IP, SM
Multi mode fibers SI SI Name Length
[m]
For Remarks
MULTI MODE fibres 90-90 OM2
472894A FSFL MM fiber 90-90 2m 2
SM-RFM/RRH, SM-
SM
LC duplex 90° left IP - LC duplex 90° left IP, MM
471743A FSFD Flexi System Fibre D 4m 4 SM-RFM/RRH LC duplex 90° left IP - LC duplex 90° left IP, MM
471707A FSFF Flexi System Fibre F 10m 10 SM-RFM/RRH LC duplex 90° left IP - LC duplex 90° left IP, MM
471708A FSFG Flexi System Fibre G 20m 20 SM-RFM/RRH LC duplex 90° left IP - LC duplex 90° left IP, MM
471709A FSFH Flexi System Fibre H 30m 30 SM-RFM/RRH LC duplex 90° left IP - LC duplex 90° left IP, MM
471710A FSFI Flexi System Fibre I 40m 40 SM-RFM/RRH LC duplex 90° left IP - LC duplex 90° left IP, MM
471395A FSFB Flexi System Fibre B 50m 50
SM-RFM/RRH
LC duplex 90° left IP - LC duplex 90° left IP, MM + LC-LC
adapter
471711A FSFK Flexi System Fibre K 75m 75 SM-RFM/RRH LC duplex 90° left IP - LC duplex 90° left IP, MM 471396A FSFC Flexi System Fibre C 100m 100
SM-RFM/RRH
LC duplex 90° left IP - LC duplex 90° left IP, MM + LC-LC
adapter
471712A FSFP Flexi System Fibre P 200m 200 SM-RFM/RRH LC duplex 90° left IP - LC duplex 90° left IP, MM
471851A FSFO Flexi System Fibre HF 2m 2 SM-RFM/RRH
LC duplex 90° left IP – LC duplex 90° left IP, MM halogen
free+ LC-LC adapter
471852A FSFQ Flexi System Fibre HF 50m 50 SM-RFM/RRH
LC duplex 90° left IP – LC duplex 90° left IP, MM halogen free
+ LC-LC adapter
472131A FSFE Flexi system fibre MM 2m 2 SM-RFM/RRH LC duplex 90° left IP - LC duplex 90° left IP, MM
MULTI MODE fibres 90-90 OM3
472844A FSFM OM3 MM fiber 90-90, 100m 100
3Gb or 6Gb,SM-
RFM/RRH LC duplex 90° left IP - LC duplex 90° left IP, MM OM3
472845A FSFN MM fiber, 90-90, OM3,200m 200
3Gb or 6Gb,SM-
RFM/RRH LC duplex 90° left IP - LC duplex 90° left IP, MM OM3
MULTIMODE fibers 0-90 OM2
472066A FSOA Flexi RRH System Fibre MM 10m
10 SM - RRH LC duplex 0 ° IP - LC duplex 90° left IP, MM
472134A FSOB Flexi RRH System Fibre MM 20m 20 SM - RRH LC duplex 0 ° IP - LC duplex 90° left IP, MM
472135A FSOC Flexi RRH System Fibre MM 30m 30 SM - RRH LC duplex 0 ° IP - LC duplex 90° left IP, MM
471964A FYTF Flexi RRH System Fibre MM 50 m 50 SM - RRH LC duplex 0 ° IP - LC duplex 90° left IP, MM
472136A FSOE Flexi RRH System Fibre MM 75m 75 SM - RRH LC duplex 0 ° IP - LC duplex 90° left IP, MM
471965A FYTG Flexi RRH System Fibre MM 100 m 100 SM - RRH LC duplex 0 ° IP - LC duplex 90° left IP, MM
471966A FYTH Flexi RRH System Fibre MM 200 m 200 SM - RRH LC duplex 0 ° IP - LC duplex 90° left IP, MM
SFPs SI SI Name Length [m] For Remarks
3 Gb SFP (ESMB/C and FSMC/D/E <-> all radio & FSML/G/F <-> rel2 radios (with 3 Gb obsai RP3)
472063A FOSG Flexi RRH Optical SFP G 850nm 3Gb 200m MM <-200m SM- RF
3 Gb Multimode mode SFP 850 nm for OBSAI, need
2x per connection, LC PC duplex connector
472807A FOSL Flexi Optical SFP 1310nm 3Gb 2km SM <-2 km SM- RF
3 Gb Single mode SFP 1310 nm for Obsai , need 2x per connection, LC PC duplex connector
471546A FOSA Flexi Optical SFP A 1310 nm3G 15Km SM <-15 km SM- RF
3 Gb Single mode SFP 1310 nm for Obsai , need 2x per connection, LC PC duplex connector
6 Gb SFP (FSML/G/F to rel 3 Radio (6 Gb Obsai RP3)
472579A FOSH Optical SFP H 850nm 6G 300m MM <-200m SM- RF 6 Gb Multimode mode SFP 850 nm for OBSAI, need 2x per connection, LC PC duplex connector
472811A FOSN Optical SFP N 1310nm 6Gb 2km SM <-2 km SM- RF 6 Gb Single mode SFP 1310 nm for Obsai , need 2x per connection, LC PC duplex connector
472580A FOSI Optical SFP I 1310nm 6G 15km SM <-15 km SM- RF 6 Gb Single mode SFP 1310 nm for Obsai , need 2x per connection, LC PC duplex connector
1 Gb transmission SFP (BTS <-> BSC/RNC/MME)
471881A FOSD Flexi Optical Telecom SFP GbE 850nm MM
See
remarks
FTIA/B
FTJA,
FTLB
FIQA/B
FSMF/
L/G
1 Gb Multimode mode SFP 850 nm for transport
backhaul, need 2x per connection, LC PC duplex
connector
550m on 50/125μm & 300m on 62.5/125μm multi
mode fiber
471880A FOSC Flexi Optical Telecom SFP GbE 1310nm
See
remarks
FTIA/B
FTJA,
FTLB
FIQA/B
FSMF/
L/G
1 Gb Single mode SFP 1310 nm for transport backhaul , need 2x per connection, LC PC duplex connector
10km on 9/125μm single mode fiber
Flexi MR DC feeding and extension kits cables
SI SI Name Length
[m]
For Remarks
472806A FPCA Dual Power Cable 2 m 2
rel2 SM-rel3 RFM,
RRH 2 x multibeam with IP - open. AWG 10
472817A
FPCB DC cable Multibeam-Multibeam
2m 2 rel 2 SM- rel2 rfm multibeam with IP - multibeam with IP, AWG 10
472823A FPCC DC cable multibeam-open 2m 2
rel2 Sm-rel3 RFM,
RRH
multibeam with IP - open AWG 8 v101 and v202 AWG
10
472246A
FPTA 4m power cable assembly between
RF module and system module 4 rel 2 SM- rel2 rfm Multibeam (IP) –Mutibeam (IP) AWG-10
471226A
FSKA kit for between SM and extension
SM with 2m cables for stack and pole
installations. Contains 2m power cable
,2*2m fiber MM and 4 * MM SFP’s. 2m WCDMA SM-Ext SM
1 * Multibeam to open end AWG-8 power cable IP , 2 *
LC 90° to LC 90° MM fiber left IP and 4 * Multimode
SFP
472302A
FSKB Same as existing FSKA kit but with
4m DC&Fiber cables for stack and pole
installations 4m WCDMA SM-Ext SM
1 * Multibeam to open end AWG-8 power cable IP , 2 *
LC 90° to LC 90° MM fiber left IP and 4 * Multimode
SFP
RFM and SM DC power feeding cables in Stack
multibeam multibeam SM rel2
3x60w RFM 472817A: FPCB DC cable Multibeam-Multibeam 2m (single)
multibeam
multibeam
472806A:FPCA DC cable 2xmultibeam-open 2 m (Y- cable)
Needed only with LOW voltage
at 1800 RFM 3x80W SM rel2
3x80w RFM
SM
rel3+FPFD
3x80w RFM
Multibeams cutted off
Low voltage in 1800 RFM DC input
472823A: FPCC DC cable multibeam-open, 2m (single)
multibeam REL2 SM
REL3 SM
SM rel2
3x80w RFM
SM rel2
3x80w RFM
Multibeam cutted
off
Standard shielded DC cable from roll open-open (single cable) REL2/3 SM 3x80w RFM
SM rel3+FPFD SM
rel3+FPFD
AWG 10=6mm2
AWG 8=10 mm2 (v.101)
AWG 10=6 mm2 v. 202)
AWG 10=6 mm2
Copper size: 3.3 mm2 – 25mm2 (2.5 – 7mm)
Cable outside diameter 6 - 25mm
Flexi MR BTS Synchronization Cables
SI SI Name Lengt
h [m]
For Remarks
472685A ESFB Sync ESMA/B/C to FSML/G/F 12m 12 ESMA/B/C ->FSML/G/F MDR14->HDMI both with IP (LE 1Q/14)
471372A ESUA Synch Cable for Flexi Ultra 12m 12 ESMA/B/C to UltraSite EDGE MDR26 with IP- D15f
472840A FTSL Sync Cable ESMB/C to FSMC/D/E 2m 2 ESMA/B/C->FSMC/D/E MDR14->MDR26 both with IP
471371A ESFA Synch Cable for Flexi 12m 12 ESMA/B/C-ESMA/B/C MDR14 ->MDR26 both with IP
472798A FSCC Sync FSMC/D/E to ESMA/B/C 5m 5 FSMC/D/E -> ESMA/B/C MDR14->MDR26 both with IP
472086A FSGA Flexi System sync cable with GPS 2 FSMC/D/E -> FSMC/D/E MDR14->MDR26 both with IP
472576A Sync Cable G 2 FSMC/D/E ->FSML/G/F MDR14 -> HDMI both with IP
472799A FSCB Sync FSML/G/F to ESMA/B/C 5m 5 FSML/G/F -> ESMA/B/C HDMI -> MDR26 both with IP
472808A FTSK Sync Cable FSML/G/F to FSMD/E 2 FSML/G/F ->FSMD/E HDMI->MDR26 both with IP
472686A ESUB SYNC CABLE FSML/G/F to D15 Ultra 12M 12 FSML/G/F ->Ultrasite EDGE HDMI with IP booths to D15f
472846A FTSN Flexi Sync FSML/G/F to FSML/G/F 15m 15 FSML/G/F -> FSML/G/F HDMI-HDMI both with IP
472509A Sync Cable F 2 FSML/G/F -> FSML/G/F HDMI-HDMI both with IP
471377A ESLA Synch LMU Cable 5m 5 MDR 26+ RJ 45 (ip sealed) to MDR 14 +
Rj 9 (not IP-sealed) + M5 to M6 grounding
cable
Flexi MR BTS GPS feeding Cables
Cable
SI SI Name
Leng
th
[m]
For Remarks
FSMF
472510A FTSE GPS cable assembly 30m 30 m MR 10 / SM-GPS
HDMI (IP) - IMC26-2212X.(Circular 12-pole from DEUTCH)
472577A FTSH GPS cable assembly 100m 100 m
MR 10 / SM-GPS
HDMI (IP)- IMC26-2212X.(Circular 12-pole from DEUTCH)
FSMC/D/E
471606A FYHA GPS cable set MDR 26 - Deutch 30 m MR BTS / SM-GPS
MDR 26 with IP seal - (Circular 12-pole from DEUTCH)
471653A FYHB GPS cable set MDR 26 – Deutch 100 m
MR BTS / SM-GPS
MDR 26 with IP seal - (Circular 12-pole from DEUTCH)
Flexi MR BTS EAC Cables SI SI Name Length
[m]
For Remarks
471408A FTCR OD CABLE RJ45 CAT5E 15 m 15
units with RJ45 -
FSES/C
EAC (& trsm) cable RJ 45 with IP
booth<--> open end
471717A FTCS OD CABLE RJ45 CAT5E 30 m 30
units with RJ45 -
FSES/C
EAC (& trsm) cable RJ 45 with IP
booth<--> open end
471718A FTCT OD CABLE RJ45 CAT5E 50 m 50
units with RJ45 -
FSES/C
EAC (& trsm) cable RJ 45 with IP
booth<--> open end
472839A FSAH EAC cable HDMI-D37 15m 15 FSMF-FSEB
EAC cable: HDMI with IP booth <-->
D37f
472563A FSAD Flexi RRH System Alarm Cable 2.5m 2,5
units with MDR14 -
FSEB
EAC cable: MDR14 with IP booths <-->
D37f
472284A FSAC Flexi RRH System Alarm Cable 15m 15
units with MDR14 -
FSEB
EAC cable: MDR14 with IP booth<-->
D37f
472693A FSAE EAC cable HDMI-RJ45 2m 2
MR10 Sm- units with
RJ45 EAC
EAC cable: HDMI <--> RJ-45 both with
IP booths (lramp up 4Q/13)
472695A FSAF EAC cable HDMI-D37 50m 50 MR10 SM - FSEB
EAC cable: HDMI with IP booths <-->
D37f (not available ~1Q/14)
472578A EAC Cable 2,5 MR10 SM – FSEB
EAC cable: HDMI with IP booth <-->
D37f
472836A FSAI EAC cable MDR36-RJ45 2m 2
rel2 SM-units with RJ45
EAC
EAC cable: MDR36 <--> RJ45 both
with IP booths (available ~1Q/14)
471628A
FSAA Flexi System Alarm cable 15 m
(12inputs 15 RFM - FSEB
EAC cable: MDR36 with IP booth <->
D37f
472629A FTSJ EAC CABLE MDR36-D37 2,5m 2,5
Rel 3 RFM - FSEB EAC cable: MDR36 with IP<--> D37f
(available ~1Q/14)
472837A FSAJ EAC cable D37-RJ45 2.5m 2,5 units with RJ45 -FSEB
EAC cable: RJ45 with IP booth <-->
D37f
472813A FSAG EAC cable MDR14-RJ45 2m 2
units with MDR14 - units
with RJ45
EAC cable: MDR14 <-- > RJ45 both
with IP booths
471464A
EBCA BBU Alarm cable 2m (used for
connecting up to six BBU alarms into
ESMB/C) 2 BBU- ESMA/B/C RJ45 with IP – D9
EAC cable use cases Unit Use case FSEB
FPMA/FPDA/FPFC (994820 cable included )
FPRA/FSES
connector D37 RJ45 screw terminal
ESMA/B/C FPA RJ45 FSAJ (2,5m) 994820 (2m) (w FPMA,
FPFC,FPDA)
FTCR (15m) FTCS (30m) FTCT (50m)
ESMA/B/C
EAC MDR36 FTSJ (2,5m) FSAA (15m)
FSAI (2m) FSAA (15m) (D37 cut) FTSJ (2,5m) (D37 cut) FSAI (2m) (RJ-45 cut)
FMSB/C/D/E EthFPMA RJ45 FSAJ (2,5m) 994820 (2m) (w FPMA,
FPFC,FPDA)
FTCR (15m) FTCS (30m) FTCT (50m)
FMSB/C/D/E EAC MDR36 FTSJ (2,5m) FSAA (15m)
FSAI (2m) FSAA (15m) (D37 cut) FTSJ (2,5m) (D37 cut) FSAI (2m) (RJ-45 cut)
FSMF EAC HDMI
FTSI (2.5m)
FSAE (2m)
FTSI (2.5m) (D37 cut) FSAH (15m) FSAH (15m) (D37 cut)
FSAF (50m) (D37 cut) FSAF (50m) FSAE (2m) (RJ45 cut)
FQEA,FQDx EAC HDMI
FTSI (2.5m)
FSAE (2m)
FTSI (2.5m) (D37 cut) FSAH (15m) FSAH (15m) (D37 cut)
FSAF (50m) (D37 cut) FSAF (50m) FSAE (2m) (RJ45 cut)
RRH, see page 14 EAC RJ45 FSAJ (2,5m) 994820 (2m) (w FPMA,
FPFC,FPDA)
FTCR (15m) FTCS (30m) FTCT (50m)
RRH/RFM, see page 14
EAC MDR14
FSAD (2.5m) FSAC (15m)
FSAG (2m) FSAD(2,5m) (D37 cut) FSAC (15m) ( D37 cut) FSAG (2m) (RJ45 cut)
RFM, see page 14 EAC/LMP MDR36 FTSJ (2,5m) FSAA (15m)
FSAI (2m) FSAA (15m) (D37 cut) FTSJ (2,5m) (D37 cut) FSAI (2m) (RJ-45 cut)
FRGG EAC Amphenol
C091 D 14 pin FSAB (15m)
Flexi MR BTS other cables
Cable and Optical TRX’s (SFP’s) Sales Items
SI SI Name
Leng
th
[m]
For Remarks
472454A RDSA RX Diversity Sharing Kit 2m 2
RFM -
RFM 6 x QMA - 7/16. 6 cables in kit
471384A EQCA Q1 cable 3.1m (used when Q1 controlled external
equipment on site)
3.1 RJ to RJ Q1 cable
471370A ELCA LMP Cable 50m (optional OD protected long LMP
cable ,used with mast top)
50 PC - LMP
port
RJ(-45) to RJ (-45) LMP cable, diffrent wiring as in std RJ-45
•472081A FTNA IUB adapter for NB cabinet Cable+PWC
Ari Rehnberg, Stefan Voss, Martti Partanen, Mark Larkin
Flexi Fiber Optic Distribution Unit
FOFODA 472606ADA 472606A Less complexity for site building
Fiber distribution for Flexi Multiradio BTS (FODA)
• Outdoor unit with IP65 protection level
• 12 fiber pairs input/output connectors. Connection between unit and
SM/radio uses short single mode jumper cable with standard IP shield at
both ends
• One optical single mode trunk cable (12*fiber pairs) with different lengths
between low and top unit
• 2 positions for fiber LC-LC adapter plate enables that jumper fiber
connection can be inside unit or at front panel of unit
• Flexi family design, can be used:
• Stand alone 1HU,
• Inside 2HU casing or with FPFC PDU, inside 3HU casing
472606A FODA Flexi Fiber Optic Distribution Unit SM
SM
Fiber cable
Power cable
48VDC
Fiber Connection
box (FODA)
Connection box (FODA)
With Outdoor PDU (FPFC)
(Inside Flexi casing)
Radios
trunk cable 12
fiberpair
Up to 12
jumpers
Up to 12
jumpers