01 - needle valves - lume · pdf file01 needle valves . ... nace mr 01.75 / iso 15156...
TRANSCRIPT
NEEDLE VALVES 01
Group Instrumentation Products Family Needle
Color Coded Dust Cap Outside screwed bonnet
For stem threaded protection Bonnet characteristics
ISOLATE
DRAIN
EQUALIZE
Temperature
1
Padlock on request 3
Padlock on request
Dimensions are for reference only, and are subject to change without notice
www.lumeinternational.com 2
5) Gland adjuster for in service adjustment
VALVE HEAD UNITS
1-4)
Stem actuator (1) and separate lower stem (4) ( needle ) fixed
type, two-piece system permits the advancement shutter
without rotation of spindle. This leads to a better seal and
long lifetime. Both spindles incorporated back stop design
2)
PTFE adjustable packing installed below operating threads to
prevent medium contamination or lubrificant washout of
operating threads. Max temperature 180°C. Graphoil as
option. Max temp. 620°C
3) Thrust bush
6) Bonnet body
7) Locking nut
8) T bar handle for low torque operation
9)Dust cap with colour coded function label prevents ingress of
contaminants to operating thread
10)Bonnet locking pin to prevent detatchment of the bonnet
from the body
11) Fixing
M6 Screws
Bonnet with Locking Plate Design
This design allows minimum handle
movements and is ideal as
protection against unauthorized
closing of the valve.
Anti-tamper Extends for stem
The Anti-Tamper handle reduce
the risk of uman error and
deliberate tampering. The valve
can be operated with the Anti-
Tamper key provided separately.
SLEEVE
2
50 mm length
100 mm length
150 mm length
on request length
0
2000
4000
6000
8000
10000
12000
0 50 100 125 150 175 200 225 230
Pre
ssu
re P
SI
Temperature °C
RTFE and PTFE
RTFE
PTFE
Group Instrumentation Products Family Needle
Dimension (mm)
Model
Technical specifications:
Optional: Packing Graphoil
Color Coded Dust Cap Outside screwed bonnet Bonnet characteristics
For stem threaded protection
Temperature
Inspections API 598
Different versions
Certificates
Uni EN 10204 type 3.1
NACE MR 01.75 / ISO 15156
Dimensions are for reference only, and are subject to change without notice
www.lumeinternational.com 3
620 9000 414 6000 7 100
Bar PSI Bar PSI Bar PSI
Body Packing Packing
Shell Seat Seat
10)Bonnet locking pin to prevent detatchment of the bonnet
from the body
11) Fixing
Hydraulics Air
7) Locking nut
8) T bar handle for low torque operation
9)Dust cap with colour coded function label prevents ingress of
contaminants to operating thread
ISOLATE
3) Thrust bush
5) Gland adjuster for in service adjustment
6) Bonnet body
10000 PSI (690 bar) 4 mm
1-4)
Stem actuator (1) and separate lower stem (4) ( needle ) fixed
type, two-piece system permits the advancement shutter
without rotation of spindle. This leads to a better seal and
long lifetime. Both spindles incorporated back stop design
2)
PTFE adjustable packing installed below operating threads to
prevent medium contamination or lubrificant washout of
operating threads. Max temperature 180°C. Graphoil as
option. Max temp. 620°C
01V100-108N8N4AT 1/2" NPT-F 1/2" NPT-F N/A PTFE SS 316/316L
10000 PSI (690 bar) 4 mm
01V100-106N6N4AT 3/8" NPT-F 3/8" NPT-F N/A PTFE SS 316/316L 10000 PSI (690 bar) 4 mm
01V100-104N4N4AT 1/4" NPT-F 1/4" NPT-F N/A PTFE SS 316/316L
01V100-068N8N4AT 1/2" NPT-F 1/2" NPT-F N/A PTFE SS 316/316L 6000 PSI (413 bar) 4 mm
01V100-066N6N4AT 3/8" NPT-F 3/8" NPT-F N/A PTFE SS 316/316L
01V100-064N4N4AT 1/4" NPT-F 1/4" NPT-F N/A PTFE SS 316/316L 6000 PSI (413 bar) 4 mm
6000 PSI (413 bar) 4 mm
30 74,5
1" 75 50 84,5
Ordering Number In Out Drain Packing Material Rating Orifice
NEEDLE VALVES 01V100 - SeriesFLOW CHART
A B C
01V110 Male / Female 01V120 Male / Male
1/2" 60 30 74,5
3/4" 65 40 79,5
1/4" 60 30 74,5
3/8" 60
0
2000
4000
6000
8000
10000
12000
0 50 100 125 150 175 200 225 230
Pre
ssu
re P
SI
Temperature °C
RTFE and PTFE
RTFE
PTFE
Group Instrumentation Products Family Needle
Dimension (mm)
Model
Technical specifications:
Optional: Packing Graphoil
Color Coded Dust Cap Outside screwed bonnet Bonnet characteristics
For stem threaded protection
Temperature
Inspections API 598
Different versions
Certificates
Uni EN 10204 type 3.1
NACE MR 01.75 / ISO 15156
Dimensions are for reference only, and are subject to change without notice
www.lumeinternational.com 4
NEEDLE VALVES 01V110 - SeriesFLOW CHART
A B C
1/2" 65 30 74,5
3/4" 70 40 79,5
1/4" 65 30 74,5
3/8" 65 30 74,5
1" 80 50 84,5
Ordering Number In Out Drain Packing Material Rating Orifice
01V110-064N4N4AT 1/4" NPT-M 1/4" NPT-F N/A PTFE SS 316/316L 6000 PSI (413 bar) 4 mm
6000 PSI (413 bar) 4 mm
01V110-068N8N4AT 1/2" NPT-M 1/2" NPT-F N/A PTFE SS 316/316L 6000 PSI (413 bar) 4 mm
01V110-066N6N4AT 3/8" NPT-M 3/8" NPT-F N/A PTFE SS 316/316L
10000 PSI (690 bar) 4 mm
01V110-106N6N4AT 3/8" NPT-M 3/8" NPT-F N/A PTFE SS 316/316L 10000 PSI (690 bar) 4 mm
01V110-104N4N4AT 1/4" NPT-M 1/4" NPT-F N/A PTFE SS 316/316L
ISOLATE
3) Thrust bush
5) Gland adjuster for in service adjustment
6) Bonnet body
10000 PSI (690 bar) 4 mm
1-4)
Stem actuator (1) and separate lower stem (4) ( needle ) fixed
type, two-piece system permits the advancement shutter
without rotation of spindle. This leads to a better seal and
long lifetime. Both spindles incorporated back stop design
2)
PTFE adjustable packing installed below operating threads to
prevent medium contamination or lubrificant washout of
operating threads. Max temperature 180°C. Graphoil as
option. Max temp. 620°C
01V110-108N8N4AT 1/2" NPT-M 1/2" NPT-F N/A PTFE SS 316/316L
10)Bonnet locking pin to prevent detatchment of the bonnet
from the body
11) Fixing
Hydraulics Air
7) Locking nut
8) T bar handle for low torque operation
9)Dust cap with colour coded function label prevents ingress of
contaminants to operating thread
Body Packing Packing 01V100 Female / Female 01V120 Male / Male
Shell Seat Seat
620 9000 414 6000 7 100
Bar PSI Bar PSI Bar PSI
0
2000
4000
6000
8000
10000
12000
0 50 100 125 150 175 200 225 230
Pre
ssu
re P
SI
Temperature °C
RTFE and PTFE
RTFE
PTFE
Group Instrumentation Products Family Needle
Dimension (mm)
Model
Technical specifications:
Optional: Packing Graphoil
Color Coded Dust Cap Outside screwed bonnet Bonnet characteristics
For stem threaded protection
Temperature
Inspections API 598
Different versions
Certificates
Uni EN 10204 type 3.1
NACE MR 01.75 / ISO 15156
Dimensions are for reference only, and are subject to change without notice
www.lumeinternational.com 5
NEEDLE VALVES 01V120 - SeriesFLOW CHART
A B C
1/2" 70 30 74,5
3/4" 82 40 79,5
1/4" 70 30 74,5
3/8" 70 30 74,5
1" 90 50 84,5
Ordering Number In Out Drain Packing Material Rating Orifice
01V120-064N4N4AT 1/4" NPT-M 1/4" NPT-M N/A PTFE SS 316/316L 6000 PSI (413 bar) 4 mm
6000 PSI (413 bar) 4 mm
01V120-068N8N4AT 1/2" NPT-M 1/2" NPT-M N/A PTFE SS 316/316L 6000 PSI (413 bar) 4 mm
01V120-066N6N4AT 3/8" NPT-M 3/8" NPT-M N/A PTFE SS 316/316L
10000 PSI (690 bar) 4 mm
01V120-106N6N4AT 3/8" NPT-M 3/8" NPT-M N/A PTFE SS 316/316L 10000 PSI (690 bar) 4 mm
01V120-104N4N4AT 1/4" NPT-M 1/4" NPT-M N/A PTFE SS 316/316L
ISOLATE
3) Thrust bush
5) Gland adjuster for in service adjustment
6) Bonnet body
10000 PSI (690 bar) 4 mm
1-4)
Stem actuator (1) and separate lower stem (4) ( needle ) fixed
type, two-piece system permits the advancement shutter
without rotation of spindle. This leads to a better seal and
long lifetime. Both spindles incorporated back stop design
2)
PTFE adjustable packing installed below operating threads to
prevent medium contamination or lubrificant washout of
operating threads. Max temperature 180°C. Graphoil as
option. Max temp. 620°C
01V120-108N8N4AT 1/2" NPT-M 1/2" NPT-M N/A PTFE SS 316/316L
10)Bonnet locking pin to prevent detatchment of the bonnet
from the body
11) Fixing
Hydraulics Air
7) Locking nut
8) T bar handle for low torque operation
9)Dust cap with colour coded function label prevents ingress of
contaminants to operating thread
Body Packing Packing 01V100 Female / Female 01V110 Male / Female
Shell Seat Seat
620 9000 414 6000 7 100
Bar PSI Bar PSI Bar PSI
0
2000
4000
6000
8000
10000
12000
0 50 100 125 150 175 200 225 230
Pre
ssu
re P
SI
Temperature °C
RTFE and PTFE
RTFE
PTFE
Group Instrumentation Products Family Needle
Dimension (mm)
Model
Included accessories
No. 1 Plug 1/4" NPT-M
Technical specifications:
Optional: Packing Graphoil
Color Coded Dust Cap Outside screwed bonnet Bonnet characteristics
For stem threaded protection
Temperature
Inspections API 598
Different versions
Certificates
Uni EN 10204 type 3.1
NACE MR 01.75 / ISO 15156
Dimensions are for reference only, and are subject to change without notice
www.lumeinternational.com 6
NEEDLE VALVES 01V130 - Series
A B C
FLOW CHART
1/2" 70 30 74,5
3/4" 75 40 79,5
1/4" 70 30 74,5
3/8" 70 30 74,5
1" 85 50 84,5
Ordering Number In Out Drain Packing Material Rating Orifice
01V130-064N4N4AT 1/4" NPT-F 1/4" NPT-F 1/4" NPT-F PTFE SS 316/316L 6000 PSI (413 bar) 4 mm
6000 PSI (413 bar) 4 mm
01V130-068N8N4AT 1/2" NPT-F 1/2" NPT-F 1/4" NPT-F PTFE SS 316/316L 6000 PSI (413 bar) 4 mm
01V130-066N6N4AT 3/8" NPT-F 3/8" NPT-F 1/4" NPT-F PTFE SS 316/316L
10000 PSI (690 bar) 4 mm
01V130-106N6N4AT 3/8" NPT-F 3/8" NPT-F 1/4" NPT-F PTFE SS 316/316L 10000 PSI (690 bar) 4 mm
01V130-104N4N4AT 1/4" NPT-F 1/4" NPT-F 1/4" NPT-F PTFE SS 316/316L
ISOLATE
3) Thrust bush
5) Gland adjuster for in service adjustment
6) Bonnet body
10000 PSI (690 bar) 4 mm
1-4)
Stem actuator (1) and separate lower stem (4) ( needle ) fixed
type, two-piece system permits the advancement shutter
without rotation of spindle. This leads to a better seal and
long lifetime. Both spindles incorporated back stop design
2)
PTFE adjustable packing installed below operating threads to
prevent medium contamination or lubrificant washout of
operating threads. Max temperature 180°C. Graphoil as
option. Max temp. 620°C
01V130-108N8N4AT 1/2" NPT-F 1/2" NPT-F 1/4" NPT-F PTFE SS 316/316L
10)Bonnet locking pin to prevent detatchment of the bonnet
from the body
11) Fixing
Hydraulics Air
7) Locking nut
8) T bar handle for low torque operation
9)Dust cap with colour coded function label prevents ingress of
contaminants to operating thread
Body Packing Packing 01V140 Male / Female
Shell Seat Seat
620 9000 414 6000 7 100
Bar PSI Bar PSI Bar PSI
0
2000
4000
6000
8000
10000
12000
0 50 100 125 150 175 200 225 230
Pre
ssu
re P
SI
Temperature °C
RTFE and PTFE
RTFE
PTFE
Group Instrumentation Products Family Needle
Dimension (mm)
Model
Included accessories
No. 1 Plug 1/4" NPT-M
Technical specifications:
Optional: Packing Graphoil
Color Coded Dust Cap Outside screwed bonnet Bonnet characteristics
For stem threaded protection
Temperature
Inspections API 598
Different versions
Certificates
Uni EN 10204 type 3.1
NACE MR 01.75 / ISO 15156
Dimensions are for reference only, and are subject to change without notice
www.lumeinternational.com 7
NEEDLE VALVES 01V140 - SeriesFLOW CHART
A B C
1/2" 75 30 74,5
3/4" 80 40 79,5
1/4" 75 30 74,5
3/8" 75 30 74,5
1" 90 50 84,5
Ordering Number In Out Drain Packing Material Rating Orifice
01V140-064N4N4AT 1/4" NPT-M 1/4" NPT-F 1/4" NPT-F PTFE SS 316/316L 6000 PSI (413 bar) 4 mm
6000 PSI (413 bar) 4 mm
01V140-068N8N4AT 1/2" NPT-M 1/2" NPT-F 1/4" NPT-F PTFE SS 316/316L 6000 PSI (413 bar) 4 mm
01V140-066N6N4AT 3/8" NPT-M 3/8" NPT-F 1/4" NPT-F PTFE SS 316/316L
10000 PSI (690 bar) 4 mm
01V140-106N6N4AT 3/8" NPT-M 3/8" NPT-F 1/4" NPT-F PTFE SS 316/316L 10000 PSI (690 bar) 4 mm
01V140-104N4N4AT 1/4" NPT-M 1/4" NPT-F 1/4" NPT-F PTFE SS 316/316L
ISOLATE
3) Thrust bush
5) Gland adjuster for in service adjustment
6) Bonnet body
10000 PSI (690 bar) 4 mm
1-4)
Stem actuator (1) and separate lower stem (4) ( needle ) fixed
type, two-piece system permits the advancement shutter
without rotation of spindle. This leads to a better seal and
long lifetime. Both spindles incorporated back stop design
2)
PTFE adjustable packing installed below operating threads to
prevent medium contamination or lubrificant washout of
operating threads. Max temperature 180°C. Graphoil as
option. Max temp. 620°C
01V140-108N8N4AT 1/2" NPT-M 1/2" NPT-F 1/4" NPT-F PTFE SS 316/316L
10)Bonnet locking pin to prevent detatchment of the bonnet
from the body
11) Fixing
Hydraulics Air
7) Locking nut
8) T bar handle for low torque operation
9)Dust cap with colour coded function label prevents ingress of
contaminants to operating thread
Body Packing Packing 01V130 Male / Female
Shell Seat Seat
620 9000 414 6000 7 100
Bar PSI Bar PSI Bar PSI
0
2000
4000
6000
8000
10000
12000
0 50 100 125 150 175 200 225 230
Pre
ssu
re P
SI
Temperature °C
RTFE and PTFE
RTFE
PTFE
Group Instrumentation Products Family Needle
Technical specifications:
Optional: Packing Graphoil
Color Coded Dust Cap Outside screwed bonnet Bonnet characteristics
For stem threaded protection
Temperature
Inspections API 598
Different versions
Certificates
Uni EN 10204 type 3.1
NACE MR 01.75 / ISO 15156
Dimensions are for reference only, and are subject to change without notice
www.lumeinternational.com 8
NEEDLE VALVES 01V150 - SeriesFLOW CHART
Ordering Number In Out Drain Packing Material Rating Orifice
01V150-064N4N4AT 1/4" NPT-F 1/4" NPT-F N/A PTFE SS 316/316L 6000 PSI (413 bar) 4 mm
6000 PSI (413 bar) 4 mm
01V150-068N8N4AT 1/2" NPT-F 1/2" NPT-F N/A PTFE SS 316/316L 6000 PSI (413 bar) 4 mm
01V150-066N6N4AT 3/8" NPT-F 3/8" NPT-F N/A PTFE SS 316/316L
10000 PSI (690 bar) 4 mm
01V150-106N6N4AT 3/8" NPT-F 3/8" NPT-F N/A PTFE SS 316/316L 10000 PSI (690 bar) 4 mm
01V150-104N4N4AT 1/4" NPT-F 1/4" NPT-F N/A PTFE SS 316/316L
ISOLATE
3) Thrust bush
5) Gland adjuster for in service adjustment
6) Bonnet body
10000 PSI (690 bar) 4 mm
1-4)
Stem actuator (1) and separate lower stem (4) ( needle ) fixed
type, two-piece system permits the advancement shutter
without rotation of spindle. This leads to a better seal and
long lifetime. Both spindles incorporated back stop design
2)
PTFE adjustable packing installed below operating threads to
prevent medium contamination or lubrificant washout of
operating threads. Max temperature 180°C. Graphoil as
option. Max temp. 620°C
01V150-108N8N4AT 1/2" NPT-F 1/2" NPT-F N/A PTFE SS 316/316L
10)Bonnet locking pin to prevent detatchment of the bonnet
from the body
11) Fixing
Hydraulics Air
7) Locking nut
8) T bar handle for low torque operation
9)Dust cap with colour coded function label prevents ingress of
contaminants to operating thread
Body Packing Packing 01V160 Male / Female
Shell Seat Seat
620 9000 414 6000 7 100
Bar PSI Bar PSI Bar PSI
0
2000
4000
6000
8000
10000
12000
0 50 100 125 150 175 200 225 230
Pre
ssu
re P
SI
Temperature °C
RTFE and PTFE
RTFE
PTFE
Group Instrumentation Products Family Needle
Technical specifications:
Optional: Packing Graphoil
Color Coded Dust Cap Outside screwed bonnet Bonnet characteristics
For stem threaded protection
Temperature
Inspections API 598
Different versions
Certificates
Uni EN 10204 type 3.1
NACE MR 01.75 / ISO 15156
Dimensions are for reference only, and are subject to change without notice
www.lumeinternational.com 9
NEEDLE VALVES 01V160 - SeriesFLOW CHART
Rating Orifice
01V150-064N4N4AT 1/4" NPT-F 1/4" NPT-F N/A PTFE SS 316/316L 6000 PSI (413 bar) 4 mm
Ordering Number In Out Drain Packing Material
6000 PSI (413 bar) 4 mm
01V150-068N8N4AT 1/2" NPT-F 1/2" NPT-F N/A PTFE SS 316/316L 6000 PSI (413 bar) 4 mm
01V150-066N6N4AT 3/8" NPT-F 3/8" NPT-F N/A PTFE SS 316/316L
10000 PSI (690 bar) 4 mm
01V150-106N6N4AT 3/8" NPT-F 3/8" NPT-F N/A PTFE SS 316/316L 10000 PSI (690 bar) 4 mm
01V150-104N4N4AT 1/4" NPT-F 1/4" NPT-F N/A PTFE SS 316/316L
ISOLATE
3) Thrust bush
5) Gland adjuster for in service adjustment
6) Bonnet body
10000 PSI (690 bar) 4 mm
1-4)
Stem actuator (1) and separate lower stem (4) ( needle ) fixed
type, two-piece system permits the advancement shutter
without rotation of spindle. This leads to a better seal and
long lifetime. Both spindles incorporated back stop design
2)
PTFE adjustable packing installed below operating threads to
prevent medium contamination or lubrificant washout of
operating threads. Max temperature 180°C. Graphoil as
option. Max temp. 620°C
01V150-108N8N4AT 1/2" NPT-F 1/2" NPT-F N/A PTFE SS 316/316L
10)Bonnet locking pin to prevent detatchment of the bonnet
from the body
11) Fixing
Hydraulics Air
7) Locking nut
8) T bar handle for low torque operation
9)Dust cap with colour coded function label prevents ingress of
contaminants to operating thread
Body Packing Packing 01V150 Female / Female
Shell Seat Seat
620 9000 414 6000 7 100
Bar PSI Bar PSI Bar PSI
0
2000
4000
6000
8000
10000
12000
0 50 100 125 150 175 200 225 230
Pre
ssu
re P
SI
Temperature °C
RTFE and PTFE
RTFE
PTFE
Group Instrumentation Products Family Needle
Optionals on request
Optional: Packing Graphoil
Technical specifications:
Color Coded Dust Cap Outside screwed bonnet Bonnet characteristics
For stem threaded protection
Temperature
Inspections API 598
Different versions
Certificates
Uni EN 10204 type 3.1
NACE MR 01.75 / ISO 15156
Dimensions are for reference only, and are subject to change without notice
www.lumeinternational.com 10
SS 316/316L
MULTIPORT NEEDLE VALVE
01V170-068N8NAT 1/2" NPT-M 3 x 1/2" NPT-F PTFE
6) Bonnet body
01V170 - Series
Ordering Number In Out Packing Material Rating Orifice
1/2" NPT-M - SS316L
Model
FLOW CHART
BP-N4SS 1/4" NPT-M - SS316L
BP-N8SS
5)
1-4)
Stem actuator (1) and separate lower stem (4) ( needle ) fixed
type, two-piece system permits the advancement shutter
without rotation of spindle. This leads to a better seal and
long lifetime. Both spindles incorporated back stop design
2)
PTFE adjustable packing installed below operating threads to
prevent medium contamination or lubrificant washout of
operating threads. Max temperature 180°C. Graphoil as
option. Max temp. 620°C
Gland adjuster for in service adjustment
Hydraulics Air
Body Packing Packing
Shell Seat Seat
01V180 - Female / Female
Bar PSI Bar PSI Bar
620 9000 414 6000 7
PSI
100
7) Locking nut
8) T bar handle for low torque operation
9)Dust cap with colour coded function label prevents ingress of
contaminants to operating thread
10)Bonnet locking pin to prevent detatchment of the bonnet
from the body
11) Fixing
ISOLATE
Thrust bush3)
Vertical Mounting Horizontal MountingHorizontal Mounting
10000 PSI (690 bar) 4 mm1/2" NPT-M 3 x 1/2" NPT-F PTFE SS 316/316L
6000 PSI (413 bar) 4 mm
01V170-108N8NAT
Bleeder
EX Plug Model
Code Size/Material
PM-N4SS 1/4" NPT-M - SS316L
PM-N8SS 1/2" NPT-M - SS316L
Code Size/Material
0
2000
4000
6000
8000
10000
12000
0 50 100 125 150 175 200 225 230
Pre
ssu
re P
SI
Temperature °C
RTFE and PTFE
RTFE
PTFE
Group Instrumentation Products Family Needle
Optionals on request
Optional: Packing Graphoil
Technical specifications:
Color Coded Dust Cap Outside screwed bonnet Bonnet characteristics
For stem threaded protection
Temperature
Inspections API 598
Different versions
Certificates
Uni EN 10204 type 3.1
NACE MR 01.75 / ISO 15156
Dimensions are for reference only, and are subject to change without notice
www.lumeinternational.com 11
Code Size/Material
BP-N4SS 1/4" NPT-M - SS316L
BP-N8SS 1/2" NPT-M - SS316L
MULTIPORT NEEDLE VALVE 01V180 - SeriesFLOW CHART
Bleeder Model
EX Plug Model
Code Size/Material
PM-N4SS 1/4" NPT-M - SS316L
PM-N8SS 1/2" NPT-M - SS316L
Ordering Number In Out Packing Material Rating Orifice
4 mm
01V180-108N8NAT 1/2" NPT-F 3 x 1/2" NPT-F PTFE SS 316/316L 10000 PSI (690 bar) 4 mm
01V180-068N8NAT 1/2" NPT-F 3 x 1/2" NPT-F PTFE SS 316/316L 6000 PSI (413 bar)
3) Thrust bush
Vertical Mounting Horizontal Mounting Horizontal Mounting
1-4)
Stem actuator (1) and separate lower stem (4) ( needle ) fixed
type, two-piece system permits the advancement shutter
without rotation of spindle. This leads to a better seal and
long lifetime. Both spindles incorporated back stop design
2)
PTFE adjustable packing installed below operating threads to
prevent medium contamination or lubrificant washout of
operating threads. Max temperature 180°C. Graphoil as
option. Max temp. 620°CISOLATE
5) Gland adjuster for in service adjustment
6) Bonnet body
7) Locking nut
8) T bar handle for low torque operation
9)Dust cap with colour coded function label prevents ingress of
contaminants to operating thread
10)Bonnet locking pin to prevent detatchment of the bonnet
from the body
Seat
11) Fixing
Hydraulics Air
Body Packing Packing 01V170 - Male / Female
Bar PSI Bar PSI Bar PSI
620 9000 414 6000 7 100
Shell Seat
0
2000
4000
6000
8000
10000
12000
0 50 100 125 150 175 200 225 230
Pre
ssu
re P
SI
Temperature °C
RTFE and PTFE
RTFE
PTFE
Group Instrumentation Products Family Needle valves and Manifolds
02V - 4 N 8 N 2 A T
SERIES
NEEDLE VALVETWO VALVE MANIFOLDSTHREE VALVE MANIFOLDSFOUR VALVE MANIFOLDSFIVE VALVE MANIFOLDSSIX VALVE DISTRIBUTOREIGHT VALVE DISTRIBUTORTEN VALVE DISTRIBUTOR
MODEL AS CATALOGUEAS CATALOGUEAS CATALOGUEAS CATALOGUEAS CATALOGUE
RATINGS3000 PSI (207 bar)6000 PSI (413 bar)10000 PSI (690 bar)
IN1/8" 3/4"1/4" 1"3/8" Flanged 1/2" M20
IN TYYPENPT IEC 61518/ABSPT IEC 61518/BBSPP METRIC
OUT
1/8" 3/4"1/4" 1"3/8" Flanged IEC 615181/2" M20
OUT TYYPENPT IEC 61518/ABSPT IEC 61518/BBSPP METRIC
VENT/DRAIN
1/8" NPT-F1/4" NPT-F1/2" NPT-F
MATERIAL
Aisi 316L (standard) ALLOYl 625Carbon Steel ALLOY 825 Aisi 316 Ti TITANIUM GR.2ALLOY 400 ASTM A350 LF2ASTM A182 F51 Duplex ASTM A182 F44ASTM A182 F53 S.Duplex ASTM A105ASTM A182 F55 S.Duplex 6M0/1.4547ALLOY C276 ASTM B148
PACKINGPTFE (TEFLON)GRAPHOIL
OPTIONALS
ALL COMPONENTS 316L LOCKING DEVICEPRIVATE LABEL S STANDARDLOX CLEANING M MINIANTITAMPER (DRAIN) E EXTENDEDANTITAMPER (ISOLATE) G GAS SOLUTIONANTITAMPER (EQUALISE) W WC TIP
Dimensions are for reference only, and are subject to change without notice
www.lumeinternational.com 12
10V
ORDERING INFORMATIONS100 06 -
01V02V03V04V05V06V08V
4 16
100-199200-299300-399400-499500-599
030610
2 10
6 FL8 M2
N AT BP M
2 104 166 FL8 M2
N AT BP M
246
A IB LC M
G
D NE OF PG QH R
T
TE
6L LDLALCTDTI
Group Instrumentation Products Family Needle
Connections Chemical resistance of materials
01 - Threaded connections
A A A A A A A A B
01 - Welded connections X B A A A A A A X
A A A A A A A A A
C B A A A A A A A
A A A A A A A A A
A A A A A A A A A
C A A A A A C A A
A A A A A A A A B
A A A A A A A A B
A A A A A A A A B
C A A A A A A A B
A A A A A A A A A
A A A A A A A X X
Certifications
Dimensions are for reference only, and are subject to change without notice
www.lumeinternational.com 13
METHANOL
SOUR GAS
MINERAL OIL
STEAM
SEA WATER
COMPR.AIR
NITROGEN
CRUDE OIL
NATURAL GAS
GLYCOL
PE
EK
De
rlin
Body material Seats
SS
31
6/3
16
L
DU
PLE
X
MO
NE
L 4
00
Inco
loy
82
5
Ha
ste
llo
y C
27
6
PT
FE
Plain End
Connections where leakages are
not allowed. Easy to check.
Connections with SW. Not critical
applications.
Connections with PE. Not critical
applications.
CA
RB
ON
ST
EE
L
CHEMICAL AGENT
ACETONE
SULFORIC ACID
HOT WATER
the plain end is supplied with a flat end pipe
to be inserted into the socket.
BW
But Weld
• BSPP: BS21 – ISO 7/1 Rp – ISO 228 G
SW
Socket Weld
PE
ASME B16.25 butt weld; easy to check by radiography
ASME B16.11. socket weld
This connection is available up to 2”
• SW (Socket weld):
• PE (Plain ends):
The connections are welded to the pipe with edge welding. This
coupling type is used in applications where there must not be losses in
the atmosphere or dismounting is not frequent.
Different schedule can be supplied upon request.
• BW (Butt weld):
NPT Connections BS connections
In threaded parallel joints (BSPP), sealing is performed by a PTFE seal
placed on the bottom of the coupling or by an OR positioned out of the
thread.
In the cone-shaped threaded joints (for example NPT/BSPT), the seal is
on the thread and is improved by applying glue or Teflon strip.
TECHNICAL DATA
The following is the table that lists the compatibility of materials with
different fluids.
The table is based on LUME practice and applications with our valves in
accordance with the value set by the ASME/ASTM/ANSI/API standards.
These indications are given by technical publications and can be considered
as a guide for selecting the materials but these indications do not
guarantee the correct application of our products or their suitability to
particular uses.
The client is responsible for the choice of a material suitable to the
application.
A = Excellent
B = good
C = poor
X = unsatisfactory
LUME needle valves can be made with different types of connections,
which can even be combined to one another.
The following couplings are available and come in either male or female
connections:
• NPT: ASME B1.20.1;
• BSPT: BS21 – ISO 7/1 Rc
• Origin material certificates, EN10204 3.1/3.2
• NACE MR 01.75/01.03
• Lox Cleaning
The standard certification package includes:
• EN10204 3.1 Pressure Test Certificate
• EN10204 3.1 Material Certificate;
• Drawings
Besides the certificates listed above, the following documents can be
issued:
www.valve-manifolds.com
www.highpressurevalves.it
www.highpressuretubings.com
www.valve-shopping.com
CUSTOMER SATISFACTION
INNOVATION, SERVICE,
Innovation means understanding how things can be done differently, putting aside the way it
has always been done as innovation expresses the constant desire to improve.
Quality comes from professionalism and the attention to create a successful business.
Innovation is strictly connected to quality: these two words represent the goals we aim for; they
challenge us to create a relationship and a connection among all parties. Lume wants to
represent the link between the clients and the producers in order to solve issues and provide a
high level of service and customer satisfaction.
LUME INTERNATIONAL srl - Viale Mazzini, 41 - 35031 ABANO TERME (PD) - Italia Tel. +39 049 8630386 - Fax. +39 049 8638304
[email protected] - www.lumeinternational.com