006 certificate - astm d3161 tas107 - viro reed with netting
TRANSCRIPT
CONSTRUCTION MATERIALS
T E C H N O L O G I E S
PTPP-003-02-01 PRI-CMT Accreditations: IAS TL-189; Miami-Dade 11-0429.05; Florida TST5878; LADBS TA24819; CRRC The test results, opinions, or interpretations are based on the material supplied by the client. This report is for the exclusive use of stated client. No reproduction or facsimile in any form can be made without the client's permission. This report shall not be reproduced except in full without the written approval of this laboratory. PRI Construction Materials Technologies LLC assumes no responsibility nor makes a performance or warranty statement for this material or products and processes containing this material in connection with this report.
PRI Construction Materials Technologies LLC 6408 Badger Drive Tampa, FL 33610 Tel: 813-621-5777 Fax: 813-621-5840 e-mail: [email protected] WebSite: http://www.pricmt.com
Laboratory Test Report
Report for: P.T. Polymindo Permata Jl. Industri 2, Blok F No. 8
Kawasan Industri Jatake Tangerang 15135, Indonesia
Attention: Tri Budi S.
Product Name: ViroReed with Thatchlock Netting Manufacturer: P.T. Polymindo Permata
Project No.: PTPP-003-02-01 Source: P.T. Polymindo Permata, Indonesia
Date Received: October 29, 2012 Dates Tested: November 12, 2012
Purpose: Determine the wind resistance performance of P.T. Polymindo Permata’s
ViroReed in accordance with Florida Building Code (High Velocity Hurricane Zone) Testing Application Standard (TAS) 107-95: Test Procedure for Wind Resistance Testing of Non-Rigid, Discontinuous Roof System Assemblies and ASTM D 3161-06: Standard Test Method for Wind Resistance of Asphalt Shingles (Fan-Induced Method.
Test Methods: Testing was completed as described in FBC (HVHZ) TAS 107-95: Test
Procedure for Wind Resistance of Non-Rigid, Discontinuous Roof System Assemblies and ASTM D 3161-06: Standard Test Method for Wind Resistance of Asphalt Shingles (Fan-Induced Method) at a continuous velocity of 110 mph. Specimens were prepared and maintained at a 2:12 slope and 80°F +15°F prior to testing. Testing was performed at a 2:12 slope.
Sampling: ViroReed product samples were provided by P.T. Polymindo Permata from
Indonesia. Thatchlock Netting was provided from Safari Thatch and Bamboo, Inc. All other sample components were provided by PRI Construction Materials Technologies and purchased through local distribution.
Test Specimens: Two (2) 50 in. by 66 in. test panels were solidly sheathed with 15/32 in. thick
APA span rated plywood. ViroReed panels were installed in accordance with the manufacturer’s instructions using #8 x 1 in. pancake head wood screws. Thatchlock Netting was installed in accordance with manufacturer’s instructions using #8 x 1 in. pancake head wood screws. Appendix A contains detailed drawings of the installation.
P.T. Polymindo Permata ASTM D 3161 and FBC (HVHZ) TAS 107 for ViroReed with Thatchlock Netting Page 2 of 7
PTPP-003-02-01 PRI-CMT Accreditations: IAS TL-189; Miami-Dade 11-0429.05; Florida TST5878; LADBS TA24819; CRRC The test results, opinions, or interpretations are based on the material supplied by the client. This report is for the exclusive use of stated client. No reproduction or facsimile in any form can be made without the client's permission. This report shall not be reproduced except in full without the written approval of this laboratory. PRI Construction Materials Technologies LLC assumes no responsibility nor makes a performance or warranty statement for this material or products and processes containing this material in connection with this report.
PRI Construction Materials Technologies LLC 6408 Badger Drive Tampa, FL 33610 Tel: 813-621-5777 Fax: 813-621-5840 e-mail: [email protected] WebSite: http://www.pricmt.com
Conditioning: Specimen conditioning was not required prior to testing. Results:
Property Test Method Results Requirement
Wind Resistance [Pass/Fail]; 110±5 mph for 2h; Slope 2:12
ASTM D 3161 Class F FBC (HVHZ) TAS 107
Specimen No. 1 Pass No evidence of permanent damage post-testing
Specimen No. 2 Pass
Statement of Compliance: The laboratory test results presented in this report are representative of the material supplied by the client. Testing was completed in accordance with standard test methods and protocols as described herein. Signed: Signed: Steven Mueller Zachary R. Priest Laboratory Technician Florida Registered Professional Engineer P.E. Number: 74021
Date: November 15, 2012 Date: November 15, 2012
Report Issue History:
Issue # Date Pages Revision Description (if applicable)
Original 11/15/12 7 NA
P.T. Polymindo Permata Appendix A ASTM D 3161 and FBC (HVHZ) TAS 107 for ViroReed with Thatchlock Netting Page 3 of 7
PTPP-003-02-01 PRI-CMT Accreditations: IAS TL-189; Miami-Dade 11-0429.05; Florida TST5878; LADBS TA24819; CRRC The test results, opinions, or interpretations are based on the material supplied by the client. This report is for the exclusive use of stated client. No reproduction or facsimile in any form can be made without the client's permission. This report shall not be reproduced except in full without the written approval of this laboratory. PRI Construction Materials Technologies LLC assumes no responsibility nor makes a performance or warranty statement for this material or products and processes containing this material in connection with this report.
PRI Construction Materials Technologies LLC 6408 Badger Drive Tampa, FL 33610 Tel: 813-621-5777 Fax: 813-621-5840 e-mail: [email protected] WebSite: http://www.pricmt.com
Specimen Layout (Dimensions in mm)
P.T. Polymindo Permata Appendix A ASTM D 3161 and FBC (HVHZ) TAS 107 for ViroReed with Thatchlock Netting Page 4 of 7
PTPP-003-02-01 PRI-CMT Accreditations: IAS TL-189; Miami-Dade 11-0429.05; Florida TST5878; LADBS TA24819; CRRC The test results, opinions, or interpretations are based on the material supplied by the client. This report is for the exclusive use of stated client. No reproduction or facsimile in any form can be made without the client's permission. This report shall not be reproduced except in full without the written approval of this laboratory. PRI Construction Materials Technologies LLC assumes no responsibility nor makes a performance or warranty statement for this material or products and processes containing this material in connection with this report.
PRI Construction Materials Technologies LLC 6408 Badger Drive Tampa, FL 33610 Tel: 813-621-5777 Fax: 813-621-5840 e-mail: [email protected] WebSite: http://www.pricmt.com
Panel Fastening
(Dimensions in mm)
P.T. Polymindo Permata Appendix A ASTM D 3161 and FBC (HVHZ) TAS 107 for ViroReed with Thatchlock Netting Page 5 of 7
PTPP-003-02-01 PRI-CMT Accreditations: IAS TL-189; Miami-Dade 11-0429.05; Florida TST5878; LADBS TA24819; CRRC The test results, opinions, or interpretations are based on the material supplied by the client. This report is for the exclusive use of stated client. No reproduction or facsimile in any form can be made without the client's permission. This report shall not be reproduced except in full without the written approval of this laboratory. PRI Construction Materials Technologies LLC assumes no responsibility nor makes a performance or warranty statement for this material or products and processes containing this material in connection with this report.
PRI Construction Materials Technologies LLC 6408 Badger Drive Tampa, FL 33610 Tel: 813-621-5777 Fax: 813-621-5840 e-mail: [email protected] WebSite: http://www.pricmt.com
.
Thatchlock Netting
(Dimensions in mm)
P.T. Polymindo Permata Appendix B ASTM D 3161 and FBC (HVHZ) TAS 107 for ViroReed with Thatchlock Netting Page 6 of 7
PTPP-003-02-01 PRI-CMT Accreditations: IAS TL-189; Miami-Dade 11-0429.05; Florida TST5878; LADBS TA24819; CRRC The test results, opinions, or interpretations are based on the material supplied by the client. This report is for the exclusive use of stated client. No reproduction or facsimile in any form can be made without the client's permission. This report shall not be reproduced except in full without the written approval of this laboratory. PRI Construction Materials Technologies LLC assumes no responsibility nor makes a performance or warranty statement for this material or products and processes containing this material in connection with this report.
PRI Construction Materials Technologies LLC 6408 Badger Drive Tampa, FL 33610 Tel: 813-621-5777 Fax: 813-621-5840 e-mail: [email protected] WebSite: http://www.pricmt.com
Specimen 1 photograph of ViroReed prior to start
Specimen 1 photograph of ViroReed at 120 minutes
P.T. Polymindo Permata Appendix B ASTM D 3161 and FBC (HVHZ) TAS 107 for ViroReed with Thatchlock Netting Page 7 of 7
PTPP-003-02-01 PRI-CMT Accreditations: IAS TL-189; Miami-Dade 11-0429.05; Florida TST5878; LADBS TA24819; CRRC The test results, opinions, or interpretations are based on the material supplied by the client. This report is for the exclusive use of stated client. No reproduction or facsimile in any form can be made without the client's permission. This report shall not be reproduced except in full without the written approval of this laboratory. PRI Construction Materials Technologies LLC assumes no responsibility nor makes a performance or warranty statement for this material or products and processes containing this material in connection with this report.
PRI Construction Materials Technologies LLC 6408 Badger Drive Tampa, FL 33610 Tel: 813-621-5777 Fax: 813-621-5840 e-mail: [email protected] WebSite: http://www.pricmt.com
Specimen 2 photograph of ViroReed prior to start
Specimen 2 photograph of ViroReed at 120 minutes
END OF REPORT