0 large tall 8 compr
TRANSCRIPT
ASME M.E. ENG DRN DATE
PART NUMBER RAW MAT'L PART NO.RAW MAT'L DESCRIPTIONPART DESCRIPTIONREV.
REVISION CHANGE HISTORY REV.
DESIGN SOURCEECO CAD DRAWING ATTACHED TO R
Large Tall 8 compr0
XX/XX/XX
DIMENSIONING AND TOLERANCINGCONFORMS TO ANSI Y14.5M-1994
THIRD ANGLE
PROJECTION
SCALE
REV.
OF
SHEETDRAWING NUMBER
TOLERANCE DATAUNLESS OTHERWISE SPECIFIED
TOLERANCE REF. DOC. 350A702
FINISH: 125 MICROINCH
ON MACHINED SURFACES
DIMENSIONS IN INCHES
XXXXXXXXX 0
NONE
THE CONTENTS OF THIS MATERIAL ARECONFIDENTIAL AND PROPRIETARY TOAAF-McQuay Inc. ANY UNAUTHORIZED
USE, REPRODUCTION, DISCLOSURE ORTRANSFER IS STRICTLY PROHIBITED. IF
FURNISHED WITH A PROPOSAL, RECIPIENTMAY USE THIS MATERIAL SOLELY TO
EVALUATE SUCH PROPOSAL. IF FURNISHEDTO AN EXISTING OR POTENTIAL VENDOR,THIS MATERIAL MAY BE USED SOLELY IN
PREPARATION OF PROPOSAL ORPERFORMANCE OF WORK FOR
AAF-McQuay Inc.
R AAF-McQuay Inc. 1999. All rights reserved.
B
.X =
.XX = .03
.XXX =
ANGLES = 2°
1 1
EXTENDED DESCRIPTION
PUR CHK
XXX
RAW MAT'L QTY.
SIZE
112.0
5.3 5.3115.3
126.0
3.0
106.0
5.3115.3
5.3
126.0
BACK RIGHT FRONT
TOP
Units ship with a protective covering that should remain in
place while the unit is being moved to its final location.
Units are provided with lifting lugs for rigging with a crane. If units are lifted by crane, use slings or cable to protect
against chaffing damage and use spreader bars across the
top of the cabinet to prevent any structural damage to the
frame. The unit base frame accepts dollies or Johnson bars
for transporting the unit. Place furniture dollies at all lift
point locations and use a Johnson bar at one end for maneuvering.