wifi product specification
TRANSCRIPT
WWW.LEDWORLD.IT
1
WIFI Product specification
目录 II. Technical parameters ...................................................................................................................................................... 2
2.01 Software Technical Parameters ............................................................................................................................... 2
III. Android software installation instructions ..................................................................................................................... 3
3.01 Installation instructions ........................................................................................................................................... 3
3.02 Connect wifi setting ................................................................................................................................................. 3
3.03 Using software course ............................................................................................................................................ 3
(A) Start software: .................................................................................................................................................. 3
(B) Full color controller application interface:........................................................................................................ 4
3.04 Connect to router setting ........................................................................................................................................ 7
IV. IOS software installation instruction ........................................................................................................................... 9
4.01 Installation instruction ............................................................................................................................................. 9
4.02 Connect wifi setting ............................................................................................................................................... 10
Enter into wifi setting,click WLAN name as “ BRGlight*********”;then input wifi password:“88888888”,
like below: ...................................................................................................................................................................... 10
4.03 Using software course (take Android as reference) .............................................................................................. 10
4.04 Connect to router setting (take Android as reference ) ........................................................................................ 13
V. 2.4G full touch remote controller ................................................................................................................................. 14
5.01 Functional characteristics: .................................................................................................................................. 14
5.02 Clear Code and Check Code: ............................................................................................................................... 15
5.03 Attention: ............................................................................................................................................................ 15
WWW.LEDWORLD.IT
2
I. Summary
BRGlight controller is following the traditional controller with infrared, radio frequency technology, it is born
because of the demand of market and the needs of the customers, it is an controller which integrate the latest
wifi technology on the market. It makes the LED control more convenient and more humane. We can use an
android or IOS phone to install control software which can achieve LED remote control , you can also use 2.4G all
touch remote controller for LED remote control. This is the sound of every customer.
Using wifi technology can make our control range more wider and break the bondage of narrow space. It can
achieve remote control 50 meters in inside buildings, more than 50 meters in outside.
Suit for:(only has RGB equipment)
WIFI RGB controller
WIFI monochrome controller
WIFI colour temperature controller
WIFI RGBW light
II. Technical parameters
2.01 Software Technical Parameters
Android Software:
Name:BRGlight
Operation Platform:support Android 4.0 and above,must has wifi function,screen resolution
above 960*540
Install:Android APK;
Memory:1.76M;
Language:Chinese/English
IOS Software:
Name:BRGlightt
Operation Platform:Support IOS 6.0 and above,suit for iPhone, iPad, and iPod touch;
Istall:Login in App Store,search“BRGlight”,download and install
Memory:2.1 MB;
Language:Chinese/English
Category:Communication
WWW.LEDWORLD.IT
3
III. Android software installation instructions
3.01 Installation instructions 1) Light disk file installation:
Open light disk catalogue:Android Software\ BRGlight.apk,
then you can see BRGlight.apk install program (different phones may have different
pictures, it has no influence for using),copy it to your phone or connect computer with your phone, click
BRGlight.apk to install.
3.02 Connect wifi setting Enter into wifi setting,click WLAN name as“LEDnet*********”;then input wifi password:“88888888”,
like belows:
3.03 Using software course
(A) Start software:
click“ ”start software,then enter into scan interface, if you has done it successfully, then you will
enter into an interface like below:
WWW.LEDWORLD.IT
4
(attention:if the list is blank, may be your phone wifi
did not connect to the controller, please take “3.02
connect Wifi setting”as reference to setting)
(B) Full color controller application interface:
1) color disk function:click controller of the list, then you can achieve lighting adjustment, like bellow:
(click the color of the color disk, choose the color you want)
Chosen color
Touch chosen
area
adjustable color
brightness area
RGB value
WWW.LEDWORLD.IT
5
2) Music control function:
3) Built-in dynamic pattern function:
(attention:you can roll up and down to choose different patterns)
WWW.LEDWORLD.IT
6
4) User-defined pattern function:
RGBW four color rest functions are the same as full color controller, please take full color controller application
interface as reference:
WWW.LEDWORLD.IT
7
3.04 Connect to router setting
Step 1:enter into setting interface:
click setting button, enter into setting
interface.
Step 2:choose equipment to setting
Step 3:start connecting to router:
Under the network pattern there is a
setting box, check it to connect router
WWW.LEDWORLD.IT
8
Step 4:choose router and input
password:
click router and input password, click
ok button;
Step 5:waiting for controller
restarting:
if step 4 is correct, then it will show
like the right picture, you just wait for
more than 10 seconds and the
controller will restarting;
Step 6:setting phone connecting to
router:
enter into phone system setting
interface, then enter into WLAN
interface, reconnecting your router
wifi, after success, restart LED.
WWW.LEDWORLD.IT
9
IV. IOS software installation instruction
4.01 Installation instruction Via phone App Store install for free(recommend):
Enter into App Store shop,search“ BRGlight”,then install it;
QR code or website download:
Open QR code scan software, scan QR code to download software and install it.
click below website, connect to App Store to download:
website:https://itunes.apple.com/cn/app/BRG-Light/id923681930?ls=1&mt=8
WWW.LEDWORLD.IT
10
2) Light disk file installation(only suit for prison break phone):
Open light disk catalogue:IOS Software \ BRGlightV1.3 CN(EN).ipa,
then you can see BRGlightV1.3 CN(EN).ipa, copy it to your phone or connect computer with your phone,click
BRGlightV1.3 CN(EN).ipa to install。
4.02 Connect wifi setting
Enter into wifi setting,click WLAN name as “ BRGlight*********”;then input wifi password:“88888888”,
like below:
4.03 Using software course (take Android as reference) Take Android “3.03 using software course”as reference
click“ ” start software, then enter into scan interface, if you has done it successfully, then you will
enter into an interface like below:
WWW.LEDWORLD.IT
11
color disk function:click controller of the list, then you can achieve lighting adjustment, like bellow:
(click the color of the color disk, choose the color you want)
WWW.LEDWORLD.IT
12
Music control function:
Built-in dynamic pattern function:
WWW.LEDWORLD.IT
13
User-defined pattern function:
4.04 Connect to router setting (take Android as reference )
Take Android “3.03 Connect to router setting”as reference
The below pictures only for reference, pictures will be subject to actual use.
WWW.LEDWORLD.IT
14
V. 2.4G full touch remote controller
5.01 Functional characteristics:
Using 2.4G high frequency wireless remote controller to achieve control, with low power consumption, long transmission distance, strong anti-interference ability, high rate of air communication etc. The appearance of the remote controller is beautiful and fashion, and it has simple and practical function. Use capacitive touch design, it has rich dimming and color modulation functions.
Specific parameters and basic function:
Key functions
name parameters
Working voltage 3V
Emission frequency 2400-2483.5Mhz
Modulation system GFSK
Transmitted power 6db
Standby current 10uA
Control distance 10-20米
External dimension 110*52*20MM
序号 模式 亮度状态 速度状态 序号 模式 亮度状态 速度状态
1 Redgradient
Not adjustable
Adjustable 11 Colorful strobe
Not adjustable
Adjustable
2 Greengradient
Not adjustable
Adjustable 12 Red strobe Not adjustable
Adjustable
3 Blue gradient
Not adjustable
Adjustable 13 Green strobe
Not adjustable
Adjustable
4 4 Red flashing
Not adjustable
14 The blue strobe
Not adjustable
Adjustable
5 5 The green flash
Not adjustable
15 Yellow strobe
Not adjustable
Adjustable
6 6 Blue flashing
Not adjustable
16 The blue strobe
Not adjustable
Adjustable
7 7 The white gradient
Not adjustable
17 Purple strobe
Not adjustable
Adjustable
8 8 Red and green gradient
Not adjustable
18 White strobe
Not adjustable
Adjustable
9 9 Red and blue gradient
Not adjustable
19 Colorful jump
Not adjustable
Adjustable
10 10 Blue gradient
Not adjustable
WWW.LEDWORLD.IT
15
5.03 Attention:
●When installing the battery, to improve the sensitivity of the touching ring, please keep the fingers do not
contact or closely touch the touching ring, and use remote controller after install the battery for three
seconds. If you find the sensitivity of the touching ring is low, please reinstall the battery.
●Do not put controller in a wide range of metal area, or use in a strong electromagnetic wave area,
otherwise the communication distance will be seriously affected.
5.02 Clear Code and Check Code:
●check code:
For a new combination, in order to use it normally, the remote controller needs to check code with
controller, specific operation is as follows:
After confirm the controller and the LED load that power supply connect normally, cut off the power supply
and reconnect it again. When on electricity, press number 5 key one time within 3 seconds, at this time,
the light of LED load will flash slowly for three times, it proves that check code successfully, and the
control system can be normally used.
●clear code:
If you need to change the combination, you can clear the match address codes of remote controller and
controller, after that, the remote controller and controller will be in initial state. If you want to use them
normally, you need to clear code, specific operation is as follows:
After confirm the controller and the LED load that power supply connect normally, cut off the power supply
and reconnect it again. When on electricity, press number 8 key in long time within 3 seconds, at this time,
the light of LED load will flash for three times, it proves that clear code successfully.