» User Manual

ES2020 Perfect Vision

GETTING STARTED

Package Contents

Positioning the Ball

Selecting a Club

ERNEST SPORTS APP

Installation for Windows

Bluetooth Connection

Home Screen

Navigation Bar

Connecting Bluetooth in App

Course View

2

4

5-8

5

6-7

8

9-12

9

10

11

12

13

14-15

TABLE OF CONTENTS

3

Data Provided

Tile View

Chip & Putt Mode

Sessions

Selecting a Club

Course and Distance Selection

Club Averages

Session Data

Compare

FIRMWARE UPDATES

TROUBLESHOOTING & TIPS

REPLACING THE BATTERY

WARRANTY / REPAIR

16

17

18

19

20

21

22

23

24

25-27

28-30

31

32

4

ES2020 Perfect Vision

Camera Location

Power Button

Base

Camera Location

Club Selection/Arrow Buttons

LCD Display

Ball Recognition LED

Doppler Location

Doppler Location

Settings Button

GETTING STARTEDPackage Contents

5

Power Adapter

ES20/20

Camera Location

USB Drive

6

Place the ES 20/20 facing the ball and golfer. The ball should be placed 11-17 inches in front of the ES 20/20 just off the back foot of the unit.

The ball recognition zone is 6x8 inches, so there is no need to get it perfect. Simply roll the ball into place, and the light will change colors when it is ready.

Position the Ball

11-17 inches

Reverse set-up for left-handed golfers

7

The LED on the front will change from red to green when the ball is in the correct position.

Reverse set-up for left-handed golfers

11-1

7 in

ches

8

Selecting a Club

ClubDriver

3 Wood5 Wood7 Wood2 Hybrid3 Hybrid4 Hybrid5 Hybrid

Display NameD WD3 WD5 WD7 WD2 HYB3 HYB4 HYB5 HYB

Club2 Iron3 Iron4 Iron5 Iron6 Iron7 Iron8 Iron9 Iron

Display Name2 IR3 IR4 IR5 IR6 IR7 IR8 IR9 IR

ClubPitching Wedge

Gap WedgeSand WedgeLob Wedge

Display NameP WDGG WDGS WDGL WDG

Once the device has been powered on, the current club selection will be shown on the display. You can change the club selection using the left/right buttons on the top front of the ES 20/20 or using the app (see page 19).

Club selection is not needed for the unit to function, but it is necessary for proper data storage

9

ERNEST SPORTS APP

The ES2020 uses a Bluetooth connection to send shot data to the app. This will require you to go into the Bluetooth settings on your smart device.

Bluetooth Connection

Installation for Windows

From the Windows Store search Ernest Sports to locate the correct app. Follow the link to the store page, and select Get the app. After installation, there will be a shortcut in the All Apps tab under the Windows start menu.

Get it onWindows 10

10

Windows Pairing

On initial launch of the app, Windows will ask if Ernest Sports can access your ES 20/20. Click Yes.

On your Windows device, go to the Windows Icon. Select Settings, Devices, and Bluetooth. Turn Bluetooth On. Scan for devices. Once found, select ES2020 and Pair. The device will show connected at first, then show paired after the connection is completed. The ES2020 will connect as needed after this.

11

Home Screen

Quick Start - Select this option if you do not need the data to be saved. This is a good option to use for a demo of the device.

Active User - Select this option if the current user already has a profile.

Create New User - Enter a name, email, and user name, then click Create User to get started with a new range session.

12

Navigation Bar

On the left edge of the app are icons that allow movement between the main sections:

• Range Session• View Logs• Compare• Tile View• Users

Clicking on the icon in the top left corner with 3 parallel lines expands the navigation bar to show names along with the icons.

NOTE: You do not have to expand the bar to use the navigation menu.

Connecting Bluetooth in the App

Click the connection icon (chain links) in the upper right corner of the screen. A window listing paired Ernest Sports devices will appear below the connection icon. If ES2020 is not an option, click REFRESH at the bottom of the window.

NOTE: If the device is still missing from the list, check the Bluetooth pairing in the Windows settings.

Select the device and click CONNECT to the right of the device. When connection is complete, a confirmation will appear, and the connection icon will turn green. The app is now ready to receive swing data.

13

14

Course ViewShot Path

Shot Data

Shot Data

Navigation MenuAdditional Navigation

Club Selection

Shot Data

15

The ES2020 app displays flight path and shot data. Course view is represented by the flag icon in the top left.

Course View cont’

• Angle of Attack• Ball Speed• Carry Distance• Club Path• Club Speed• Dynamic Loft• Face Path• Face to Path• Hangtime• Landing Angle• Launch Angle• Launch Direction • Maximum Height• Smash Factor

16

Data Provided

• Spin Loft• Spin Rate• Spin Axis • Total Distance

Initial launch statistics immediately populate the screen and are followed by real time animated flight statistics.

17

Tile View

From the left side of the screen select the Tile View icon.

This view shows all of the data without the distraction of the ball path display.

This view is ideal for outdoor use because it is much easier to see with the glare of the sun.

It is also good to use when students are getting distracted by the ball path display during a lesson or club fitting.

18

Chip & Putt Mode

Chip and putt modes are intended for use with simulation software. Please refer to simulation software documentation for details about how the software is used.

Chipping is notated by CHP on the top LCD, and putting is notated as PTT on the top LCD.

Note: Chipping and putting are not intended for the use with the ES Golf app.

From the top center of the screen select Session.

To begin a new session, name your range session and select Start Session.

To join a previous session, select an existing session from the list and click Join Session.

Sessions

Pro Tip: Session name can be used to identify specific clubs or balls being tested.

19

From the top center of the screen select Club.

Scroll through the list and select the club you would like to use. That club will then appear on the ES 20/20.

Appropriate club selection is needed for storing accurate club statistics.

Selecting a Club

20

From the top center of the screen, select Hole.

Under Location, select the course you would like to view.

Under Distance to Hole, use the slider to select distance to the pin. Then select Set Distance.

Under Rotation, the target line can be aimed to the left or right.

Course and Distance Selection

21

Select View Logs from the navigation bar.

From the box on the left, select Averages with the toggle button, then the session to be viewed.

To change the club data being viewed: • Select club from list at

bottom of the page• Swipe left to right• Left/Right arrow keys• Arrows at the sides of

the screen

Club Averages

22

Select View Logs from navigation bar.

From the box on the left, select Raw with the toggle button, then choose the session to be viewed.

Session Data

23

Compare Feature

This feature can be used to compare any different equipment; including, but not limited to, clubs, shafts, balls, swing style, or any other golf equipment.

Up to four items can be compared at a time, and they are color coded on the main screen, raw data screen, and comparison screens.

This can be turned on/off from the drop-down on the main screen. The Item names can also be changed from the drop-down as well.

The dispersion indicator rings can be turned on/off from the top of

24

FIRMWARE UPDATE

25

There are two types of firmware on the ES 20/20. Each can be updated independent of each other.

The first firmware is called the Version, displayed as VER on the LCD of the ES 20/20. This version number is also displayed in the bottom right corner of the app.

The second is called the SoM, displayed as SoM on the LCD of the ES 20/20.

For best results, both should be kept up to date.

Version Firmware Update

The version firmware can be updated through the app.

In the connections menu (notated by the chain links icon) located in the top right corner, an UPDATE FIRMWARE button appears if one is available.

If this button is visible, an update is available for download.

To update, click UPDATE FIRMWARE, and the app will update via Bluetooth.

The device will power off after it is complete. Power the device back on and reconnect to the app.

26

SoM Firmware UpdateDownload the latest SoM firmware from Ernest Sports. Pay attention to where the file is saved so it can be moved.

Copy and paste the file *.img on to your Ernest Sports USB Drive that was included with the ES 20/20. Another USB Drive can be used, but it needs to be at least 8GB and have the FAT32 format.

Power on the ES 20/20. Plug the USB Drive into the back of the unit. Press the programming button on the top of the unit, and scroll to the right to find UPD.

Once on UPD, press the programming button again. The letters UPD will flash for approximately 90 seconds, and the device will power off.

Power the device back up an reconnect the Bluetooth.

27

TIPS & TRICKS

28

• When first receiving the ES 20/20 plug in and charge overnight• Always keep the acrylic free from debris•

TROUBLESHOOTINGThe red/green LED will not light up• The device is not receiving power• Check your battery cable connection and make sure the battery is charged The LED will not turn green• Check the ball position and power The app is not receiving the shot data• Check the Bluetooth settings in your operating system first, then check the connection

in the app How do you set up the unit for left-handed golfers?• The ES 20/20 is designed for both left and right-handed golfers. Mirror the setup so

that downrange is to the right of the ES 20/20

The ES 20/20 is not showing up in the Bluetooth settings for the computer or in the app• First make sure the ES 20/20 is turned on and the Bluetooth on the computer is also on• If you answered No to the security prompt Let Ernest Sports access your ES2020,

your ES 20/20 will be blacklisted by your computer (see My ES 20/20 was blacklisted)

29

My ES 20/20 was blacklisted in the Bluetooth settings• Go to the Settings menu on you computer (it should be listed at the near the bottom

of the start menu or can be found in the notifications center)• Click on Privacy, choose Other Devices• Scroll down until you see ES16 and make sure it is enabled

30

Replacing the Battery

31

The battery can be recharged internally from the charging port on the back.

There are two indicator lights on the back of the unit.

The yellow light indicates that the external power is plugged in.

The red light indicates that the battery is charging. When the red light turns off, the unit is fully charged.

The ES2020 is warrantied for twelve (12) months against any manufacturing defects in materials and workmanship, and for all parts and labor. The warranty applies only to the original purchaser of this product. Warranty work may be completed only by Ernest Sports. If the device is not found to be defective, no warranty work will be performed.

This warranty does not cover damage that is the result of modifications of the product, misuse, abuse, neglect, negligence, vandalism, accident, or abnormal conditions, including but not limited to war, flood, fire, wind or damage caused by occurrences over which Ernest Sports has no control.

For more information call 855-354-4653.

WARRANTY / REPAIR

32

www.TWITTER.com/ernestsportswww.FACEBOOK.com/ernestsports

855.354.GOLF » www.ernestsports.com » 4955 Avalon Ridge Pkwy, Suite 200, Peachtree Corners GA 30071