www.intertek.it1

www.intertek.it2

Esigenze di formazione e qualifica per soddisfare i Customer Specific Requirement degli OEM

Alessandro Ferracino (Intertek Certification General Manager)

www.intertek.it3

IATF: 14 elements

Oversight Offices

IATF members include the following vehicle manufacturers: (BMW, Daimler, Chrysler, FIAT, Ford, General Motors, PSA, Renault e Volkswagen)

www.intertek.it4

OEM - Customer-Specific Requirements

Point 0.5 Standard Iso/Ts 16949:2009“This technical specification, together with the applicable customer specific requirements, defines the basic requirements of quality management system for those who sign this document,

Section 5 – General Requirements of the audit process5.8 …Each auditing site should include at least the following:…n) The information and evidence about the customer's specific requirements, includes management system requirements for the specific quality of the Customer which should be subject to an audit.

The verification of compliance with the requirements of the customer is part of the third party verification of compliance with ISO/TS16949: 2009.

Who is responsible for compliance audit?

www.intertek.it5

8.2.2.5 Internal auditor qualificationThe organization shall have internal auditors who are qualified to audit the requirementsof this Technical Specification (see 6.2.2.2).6.2.2.2 TrainingThe organization shall establish and maintain documented procedures for identifyingtraining needs and achieving competence of all personnel performing activities affectingconformity to product requirements. Personnel performing specific assigned tasks shallbe qualified, as required, with particular attention to the satisfaction of customerrequirements.

Internal Auditor Qualification

www.intertek.it6

CSR for Internal Auditor QualificationOEM Requirement

FORD INTERNAL AUDITAuditor professional qualification:• TRAINING about:ISO/TS 16949:09Core tools related (APQP; SPC; MSA; FMEA; PPAP)Automotive process approachFord CRS applicationAuditing operational activity for 1 day (case study, simulation or witness auditing).OrAlternatively to the TRAINING above mentioned:Or must have made 5 internal audits ISO/TS 16949:09 in the previous 24 months under the supervision of an auditor trained in accordance with the above point.These audits should have covered all ISO/TS 16949:2009 requirements and all processes that have impact on Ford, at least once in five (or more Audits).

GM Skilled on all Core Tools

Volkswagen According to Formel Q- Capability/Software carrying out process self audits at least once a year.

www.intertek.it7

5.7 Audits of the Supply Chain must be conducted by VDA 6.3 qualified Auditors(see VDA 6.3: Requirements for Process Auditors of Supply Chains)

3.2 ConductingThe Internal Audit must be conducted by qualified VDA 6.3 auditors (See VDA 6.3: Internal AuditorRequirements).

The Formel Q-Capability

Appendix to Formel Q Capability

VW Focus

www.intertek.it8

Ford Focus

Training• Clarification provided on training available to suppliers either

online or in person

4.9 Resources (ISO/TS 16949 cl. 6.2.2.2, 6.3.1, 6.2.2, 6.2.2.1)When considering a request for quote, the organization must account for and be able to apply all necessary resources (trained personnel and equipment) to complete the purchase requirements to Ford's satisfaction.

www.intertek.it9

Renault Focus

The supplier staff who will work directly with Renault shall have received training in ANPQP.

www.intertek.it10

PSA Focus

Previously, PSA Peugeot Citroën requested the supplier project teams to be trained in "AQF” (i.e."Suppliers Quality Assurance") by an organism approved by PSA. Now, the training may be provided by a supplier AQF representative after PSA agreement

When auditing paragraph 6.2 Human resources,the auditors can verify that the supplier project teams are trained either by an organism approved by PSA Peugeot Citroën or by a supplier AQF representive approved by PSA Peugeot Citroën.

www.intertek.it11

AIAG Publications

www.intertek.it12

Ford CQI 9

CQI 19

Heat Treatment(Brazing and Sintering)Sub-tier Supplier Management Process

Chrysler CQI 8CQI 9CQI 11CQI 12CQI 15CQI 17

Layered Process AuditHeat TreatmentPlatingCoatingWeldingSoldering

General Motors CQI 9CQI 11CQI 12CQI 15CQI 17

Heat TreatmentPlatingCoatingWeldingSoldering

AIAG Publications

www.intertek.it13

AIAG Publications

www.intertek.it14

CQI 19 | Sub-tier Supplier Management Process

AIAG Publications

www.intertek.it15

AIAG Publications

Pagina 1Pagina 2Pagina 3Pagina 4Pagina 5Pagina 6Pagina 7Pagina 8Pagina 9Pagina 10Pagina 11Pagina 12Pagina 13Pagina 14Pagina 15