strongweldstrongweld.net/pdf/catalogue2014.pdf · strongweld product catalogue - 2014mild steel...

Product Catalogue - 2014Strongweld


Strongweld continues the path initiated by INDURA and its team. The quality of our products and the devotion of our people provide our distributors with the assurances

that choosing Strongweld will guarantee the Ultimate Welding Performance


Because we really care...

Strongweld®

Ultimate Welding Performance

Strongweld®

Ultimate Welding Performance


WELDINGEQUIPMENT & SUPPLIES

MMA OR SMAWSTICK ARC WELDING

Product Catalogue - 2014Strongweld Mild Steel Electrodes

Strongweld 6010 – AWS E-6010




Typical Applications: broad scope electrode specially, when welding in all positions. Ideal for tanks, pipes, pressure vessels and

pipes, structures, boats and galvanized plates.

820015014in3/16

1116011014in5/32

161108014in1/8

34906012in3/32

sticks/lbMax AmpMin AmpLengthDiameter

Packaging: 2lb & 5lb alum bags, 10lb canisters & 50lb boxes (both with 5lb alum bags inside)

AWS: 22%26%Elongation in 2in

AWS: 48 ksi60 ksiFluency LimitCertifications:

ABS, Lloyd Register, Germanischer

Lloyd

AWS: 62 ksi72 ksiTensile Resistance

Description: carbon steel electrode with iron powder coating for greater disposition rate and easier implementation, along with

outstanding mechanical properties. DC+. All Position. The arc stability and protective shield help direct the deposit reducing

undermining. RED



820016014in3/16

1016012014in5/32

161208014in1/8

24905012in3/32






Lloyd &CWB


Description: carbon steel electrode with potassium rutile coating designed for AC and DC in both polarities. An all position electrode

characterized by easy slag removal and a smooth and stable arc. In vertical welding, it is recommended to use upward progression.

BLUE



820016014in3/16

1116012014in5/32

161208014in1/8

34905012in3/32






Lloyd &CWB


Description: carbon steel electrode with potassium cellulosic coating designed for AC use but, it can also be used with DC+. An all

position electrode with rapid solidification of the weld to facilitate vertical and overhead welding. Arc easily handled to get high

deposition rates. WHITE

Typical applications: steel profiles, gas cylinders, ship decks, heavy structures, truck rims.

430022514in3/16

724016014in5/32

1119011014in1/8

241108012in3/32




AWS: 48 ksi56 ksiFluency Limit Certifications:

ABS, Lloyd Register, Bureau Veritas


Description: mild steel electrode with iron powder coating designed for AC and DC in both polarities. An electrode for flat an

horizontal position with high deposition rates-way over conventional electrodes-with minimum dilution, smooth bead appearance

and solid arc. BRICK




Strongweld 7018RH – AWS E-7018

Strongweld 7018/1 – AWS E-7018-A1

Typical Applications: all kind of mild steel structures, specially, in descendent vertical welds in thin sheets.

626018014in3/16

1019014014in5/32

1315011014in1/8

281108012in3/32





ABS, Lloyd Register and CWB


Description: carbon steel electrode with rutile and iron powder coating designed for AC or DC in both polarities. An all position

electrode characterized by greater weld speeds than conventional types (6013) and has very low loses by splattering. BROWN

Typical Applications: recommended for jobs requiring high radiographic quality, particularly in boilers and pipes. Good physical

properties make it ideal for use in shipyards.

627520014in3/16

920014014in5/32

1315012014in1/8

251207012in3/32





ABS, Lloyd Register, GL and CWB


Description: mild steel electrode with low hydrogen iron powder coating designed for DC positive. All position electrode with low

hydrogen content and resistant to humidity designed for welds that require severe radiographic tests. Smooth arc and low boss by

splattering. GRAY

Typical Applications: mild steel although also may be used with many low alloys and medium carbon. It provides greater economy in

filling welding of one or more layers.

430023014in3/16

623015014in5/32

915012014in1/8

231209012in3/32





ABS and CWB


Description: mild steel electrode with rutile and iron powder coating designed for AC or DC in both polarities. Flat and Horizontal

position electrode for mild or carbon steel. It has a deposition rate that doubles that of the conventional electrode. Easy slag

removal. GRAY

Typical Applications: recommended for jobs requiring high radiographic quality: structural fabrication, buildings, ship repairs, oil

platforms and pipes.

627520014in3/16

920014014in5/32

1215012014in1/8

241207012in3/32







Description: mild steel electrode with low hydrogen iron powder coating designed for DC positive. All position electrode with low

hydrogen content and easy slag removal designed for welds that require severe radiographic tests. Smooth arc and excellent

presentation. GRAY


Strongweld 7018 GOLD – AWS E-7018-1 H4

Strongweld 8018/B2 – AWS E-8018-B2



Typical Applications: chromium-molybdenum steels where high mechanical strength is required like oil platforms, shipbuilding, high

pressure columns, thermoelectric plants and refineries.

625019014in3/16

818014014in5/32

1313010014in1/8

291007012in3/32


Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside)





Description: low alloy steel electrode with low hydrogen iron powder potassium coating designed for DC positive. All position

electrode with low hydrogen that prevents cracking of the cord and the heat affected zone when welding high strength steels.

WHITE

Typical Applications: structural building, ship repair, oil platforms, pressure pipes.

627520014in3/16

920014014in5/32

1315012014in1/8

251207012in3/32





ABS, Lloyd Register, GL and CWB


Description: carbon and low alloy steel electrode with low hydrogen iron powder coating designed for DC positive. All position

electrode with high tenacity at low temperatures. High radiographic quality deposit. Easy slag removal. Excellent operative

characteristics. Low hydrogen content <4ml/100gr. BEIGE.

Typical Applications: cracking equipment in oil and petrochemical industries, hardfacing for carbon or alloy steels, chromium-

molybdenum steels. ASME IIC SFA 5.5/AWS A5.5

915012014in5/32

141209014in1/8

23906012in3/32







Description: basic electrode with stable arc and spray transfer. All position, DC Positive. Good resistance for high sulfur

environments inside pipes and boilers. Specially designed for pipe fabrication and repairs at high temperatures: up to 1,110F.

BEIGE

1015012014in5/32

625019014in3/16

Typical Applications: cracking equipment in oil and petrochemical industries, hardfacing for carbon or alloy steels, chromium-

molybdenum steels. ASME IIC SFA 5.5/AWS A5.5

141209014in1/8

27906012in3/32







Description: basic electrode with stable arc and spray transfer. All position, DC Positive. Good resistance for high sulfur

environments. Specially designed for pipe fabrication and repairs at high temperatures: up to 1,110F. Good for welding creep

resistant steels alloys. BEIGE


Strongweld 8018/C1 – AWS E-8018-C1

Strongweld 9018/M – AWS E-9018-M


Strongweld 10018/M – AWS E-11018-M

Typical Applications: designed for fine grain steels (ASTM A 516 Gr 70) as well as fine grain steels for cryogenic applications where

impact resistance is required. Refineries, pressure vessels for liquefied gases, heavy equipment, structures subject to low

temperatures.

525018014in3/16

1120014014in5/32

1415010014in1/8

301007012in3/32






Lloyd and Nippon Kaiji Kyokai



electrode with 2.5% Nickel which gives excellent mechanical properties in welds requiring resistance to low temperature impact.

WHITE

Typical Applications: designed for fine grain steels used in high temperature applications. Recommended for high tensile steel

welding, low micro alloys micro-alloyed with each other or with lower strength. ASTM A 633 Gr.E – ASTM Gr. H75, H80, J80 and

J90

524017014in3/16

1118013014in5/32

151409014in1/8

30956512in3/32









electrode with special alloys and excellent radiographic quality, specially suited for high temperature welds up to 1,100F. WHITE.

SPECIAL ORDER

Typical Applications: it requires careful control of the humidity in the coating or another hydrogen source. Fine grain high tensile

steels in high temperature. ASTM A 633 Gr. E, ASTM A 672 Gr. H75, H80, J80 AND J90.

524017014in3/16

1118013014in5/32

141409014in1/8

30956512in3/32




AWS: 77 ksi82 ksi4Fluency LimitCertifications:




Description: low alloy steel electrode with low hydrogen iron powder coating designed for DC positive. All position electrode with

special alloys and excellent radiographic quality, specially suited for high temperature welds up to 1,100F. WHITE. SPECIAL

ORDER

Typical Applications: highly efficient welds in low alloy and high strength steel (military specs). T1, HY80, ASTM Gr. A514, A517

steel structures, mechanical shovels, armored vehicles, mill shells, heavu machinery chassis, SAE 4130, 4140, 4340 steels.

627520014in3/16

1122016014in5/32

1416012014in1/8

301208012in3/32








Description: low alloy steel electrode with low hydrogen iron powder coating designed for DC positive. All position electrode with a

high deposition rate and allows high mechanical strength joints. Outstanding radiographic quality. GRAY. SPECIAL ORDER

Product Catalogue - 2014Strongweld Maintenance Electrodes

BUILD-UP 24

BUILD-UP 28

BUILD-UP 4340

ANTIFRIX 350

0.28%

2.25%

Typical Applications: blocks of arrays, crane wheels, couplings, mechanical shovels, mining

machinery.

one and two layers recently welded.

ASTM A 36 steel

34-43 HRc30-40 HRcHardness


Mo0.20%Si

Ni0.74%Mn

1.10%Cr0.38%C

Description: electrode for filling parts of carbon steel and low alloy steel. Surface coating,

metal-metal wear. Machinable deposits. Good resistance to compression and wear. AC or

DCPE.

0.01%

0.01%

Typical Applications: final layer of axes, gears of slow turning wheels, rail guides,

bulldozers.


ASTM A 36 steel

210-330HB180-310 HB Hardness


Mo0.29%Si

Ni0.40%Mn

1.05%Cr0.12%C

Description: filling of carbon steel and low alloy steel. Base for hard coating. Machinable

deposits. Good resistance to compression. Specially designed for reconstructing parts of

carbon and low alloy steel where machinable recharge is required. AC or DCPE.

0.40%

0.30%

Typical Applications: specially designed for apps in worn surface reconstruction that

requires greater impact and compression resistance, and whose deposits are to be

machined: tips of axes, track links, gears, pulleys.


ASTM A 36 steel



Mo0.40%Si

Ni1.00%Mn

0.90%Cr0.20%C

Description: electrode for filling parts of carbon steel and low alloy steel. Base for hard

coating. Deposit is machinable and resistant to cracking. AC or DCPE.

0.04%

0.01%

Typical Applications: specially designed for apps in worn surface reconstruction that

requires greater impact and compression resistance, and whose deposits are to be

machined: tips of axes, track links, gears, pulleys.


ASTM A 36 steel



Mo0.30%Si

Ni0.40%Mn

2.27%Cr0.22%C

Description: electrode for filling parts of carbon steel and low alloy steel. Base for hard

coating. Deposit is machinable and highly resistant to metal-to-metal wear. AC or DCPE.

Product Catalogue - 2014Strongweld Hardfacing Electrodes

ANTIFRIX 450

ANTIFRIX 550

OVERLAY 60

OVERLAY 62

0.91%

0.14%

Typical Applications: specially designed for tough and hard fillings in earth movement

equipments: loader buckets, crushers, hammer mills, crusher sheets, feed screws.


ASTM A 36 steel

55-63HRc55-60 HRcHardness


Mo2.82%Si

Ni3.22%Mn

35.0%Cr5.00%C

Description: base coating for surfaces subject to high abrasion wear and impact. High

hardness at elevated temperatures. Excellent resistance to compression. Deposit not

machinable. High Alloy content electrode that offers a great set of properties. AC, DCPE.

0.55%

0.48%

Typical Applications: bulldozers, shovels, feed screws or any application subject to extreme

wear.


ASTM A 36 steel



Mo0.35%Si

Ni0.30%Mn

6.70%Cr0.60%C

Description: rutile electrode for applications as hard coating. It is excellent for surfaces

subject to extreme wear. AC, DCPE.

<0.01%

<0.01%

Typical Applications: mill wheels, valve seats, pistons, farm machinery. Excellent for

moderate impact and metal-to-metal wear.


ASTM A 36 steel



Mo0.20%Si

Ni0.50%Mn

4.5%Cr0.09%C

Description: rutile electrode for hard coating. Ideal as base for hard coating of greater

hardness. Deposit can be worked with appropiate tools . AC, DCPE.

0.50%

0.20%

Typical Applications: screw conveyors, cement plant, mill hammers.


ASTM A 36 steel

48-61HRc40-58 HRcHardness


Mo0.55%Si

Ni1.70%Mn

31.0%Cr3.40%C

Description: coating for surfaces subject to high abrasion wear and impact. High hardness

at elevated temperatures. Excellent resistance to compression. Deposit not machinable.

High Alloy content electrode that offers a great set of properties. AC, DCPE.


OVERLAY 65

OVERLAY SUGAR

WELDMANG 14

WELDMANG CROM

2.36%

7.76%

Typical Applications: cast tanks, converters, mill ovens.


ASTM A 36 steel

55-63 HRc 556-680

HB

55-60 HRc 555-

627HB

Hardness


Mo2.69%Si

Ni1.41%Mn

23.50%Cr4.55%C

Description: coating for surfaces subject to high abrasion wear and impact. High hardness at

elevated temperatures. Excellent resistance to compression. Deposit not machinable. High

C-Cr-Mo alloy content that offers high resistance to extreme wear. It is recommended the

use of electrode e310-16 as base. AC, DCPE.

1.00%

0.07%

Typical Applications: repair of cast manganese steel, rollers, crushers. Specially designed to

repair defects of cast.


ASTM A 36 steel

400-500 HB190-220 HB Hardness


Mo0.13%Si

Ni15.5%Mn

0.04%Cr0.50%C

Description: manganese austenitic steel electrode, AWS type EFeMn-B. Suitable for joining,

filling and coating of Mn steel parts Hadfield type. High resistance to wear by impact and

compression. During the welding process the workpiece temperature must be mantained

under 482F (250C). AC, DCPE.

Typical Applications: sugar cane mills as the surface characteristics of the deposit allow for

easier transport of the cane and increase the rate of extraction for juice.

one and layer recently welded. ASTM

A 36 steel

55-60 HRcHardness


Description: hard coating carbon-chromium alloy electrode specially designed to be applied

over cast iron, ductile cast and cast alloys. Also for low and mid alloy steels. DCPE.

0.02%

2.50%

Typical Applications: repair cast manganese steel: rollers, crushers.


ASTM A 36 steel



Mo0.19%Si

Ni14.47%Mn

4.16%Cr0.78%C

Description: manganese austenitic steel electrode, AWS type EFeMn-A. High resistance to

wear by impact and compression. Suitable to join, fill and coating in all manganese steel.

During the welding process the workpiece temperature must be mantained under 482F

(250C). AC, DCPE.


WELDMANG CAST

ALLOY 160

SUPER ALLOY

GREEN ALLOY 29

0.01%

0.07%

Typical Applications: repair cast manganese steel: rollers, crushers.


ASTM A 36 steel



Mo0.13%Si

Ni15.50%Mn

0.04%Cr0.50%C

Description: manganese austenitic steel electrode, AWS type EFeMn-B. High resistance to

wear by impact and compression. Suitable to join, fill and coating Hadfield-type manganese

steel work pieces. During the welding process the workpiece temperature must be

mantained under 482F (250C). AC, DCPE.

58.5% - 0.861%

9.51%

Typical Applications: recommended to join, fill and repair carbon and mild steel, austenitic

manganese steel, stainless steel among others.

one layer recently welded. ASTM A

36 steel

Traction Resistance:

120 ksi

225-420 HB Hardness


Fe - Mo0.738%Si

Ni1.10%Mn

29.09%Cr0.098%C

Description: an electrode for welding dissimilar and difficult steels. High toughness and

mechanical resistance. Great resistance to corrosion, temperature and impact. Ideal base

for hard facing with great deposit rate. Specially designed to bond different types of steel,

like those present in tools or cast, with excellent resistance to cracking. Also use as

intermediate layer in worn carbon steel pieces, before applying the hard facing. AC, DCPE.

All Position.

balance

8.60%

Typical Applications: buckets plating, engine seats, base for hard coatings.


ASTM A 36 steel



Fe0.50%Si

Ni3.50%Mn

20.0%Cr0.80%C

Description: for welding, joining and filling of manganese steel and carbon steel parts.

Resistant to deformation under load. It is a high alloy and performance electrode with high

resistance strength to wear. AC, DCPE. All Position.

Typical Applications: recovering pieces or components in heavy machinery. One of the most

versatile electrodes in the industry that can be used as intermediate layer before hard

coating, for pieces subject to corrosion attack and it has above excellent impact and thermal

resistance, even to sudden thermo shock.

one layer recently welded. ASTM A

36 steel

Traction Resistance:

116 ksi

215-430 HB Hardness


Description: this electrode provides beads with outstanding finishing, ideal to be machined.

The bead is extremely easy to control, even in difficult field conditions. A new high-alloy

formulation makes possible bonding or coating, eliminating compatibility issues in a wide

range of steels with dissimilar characteristics either by chemistry, thermal treatment or

mechanical properties. A careful selection of ingredients provides for easy slag removal.

AC, DCPE. All position.

Product Catalogue - 2014Strongweld SPECIAL Hardfacing Electrodes

BORIUM

COBALT 6

COBALT HR 21

To preserve quality and minimize waste or need for conditioning, Strongweld electrodes come in 2lb and 5lb vacuum aluminum bags. The 10lb canisters and 50lb boxes carry two and ten 5lb vacuum aluminum bags inside too. More

effective, more convenient.

Typical Applications: drill bits, cement industry machinery, snow chains or dredging,

crushing teeth.


ASTM A 36 steel



Description: coating for surfaces subject to abrasion or friction. Rods for oxyacetylene

welding application. Electrode for electrical appliances. It is composed of a tube of mild steel

with tungsten carbide crystals, evenly distributed inside. As tungsten is one of the hardest

materials known, it gives the deposit high wear resistance. AC, DCPE.

4.50% - balance

2.70% - 2.60%

Typical Applications: hot die, valve seats, steel pistons, hot work tools.

one and two layers recently welded

and hardened by work

48 HRc32 HRcHardness


Mo - Co0.80%Si

Ni - Fe0.60%Mn

28.0%Cr0.30%C

Description: Machining is difficult. Cobalt base alloy with Cr-Ni-Mo designed for coating and

recovery of parts subject to metal-metal wear at high temperatures. It has good strength

and toughness even at high temperatures up to 1,922 F (1,050C). AC, DCPE.

4.50% - balance

2.60% - 2.70%

Typical Applications: valve seats, driving wheel billet, steel piston, oxy-petrol burners.

one & two layers recently welded,

hardened by work

46 HRc38 HRcHardness


Mo - Co1.22%Si

Ni - Fe0.04%Mn

28.7% - 5.40%Cr - W1.27%C

Description: Cobalt-based electrode or rod (AWS ECoCr-A) for coating surfaces exposed to

abrasion and corrosion at high temperatures. Machinable and free of crack deposits. This

molten alloy can be applied as a base rod for oxyacetylene welding, TIG or as coated

electrode for welding with DC. In cobalt-chromium-tungsten base, this non-ferrous alloy

retains its strength under conditions of severe temperatures. AC, DCPE.

Product Catalogue - 2014Strongweld SPECIAL Nickel Based

NICROELASTIC 46 – AWS ENiCrFe-3 NICROMO 3 – AWS ENiCrMo-3

Strongweld 13-4 – AWS E410 NiMo-16

Typical Applications: very appropriate for Pelton, Francis and Kaplan wheel turbines. Stainless steels 403, 405, 410, 410S, 414,

416, 420 and ASTM A240 (type CA6NM). UNS No. S41500.

719015014in3/16

1015012014in5/32

141209014in1/8

27906012in3/32




n/an/aFluency Limit Certifications:

ABS, Lloyd Register


Description: synthetic electrode for austenitic stainless steel, similar to E410 but deposit contains less Cr and more Ni. The goal is

to eliminate ferrite in the microstructure due to its adverse mechanical effects, providing better cracking resistance. DCPE. All

Position.

Typical Applications: high chromium alloys (type 600 and 400), low, medium and high steels and carbon steels up to 9% Ni.

Suitable for parts subject to cryogenic temperatures and high temperatures in corrosive environments: tanks, dissimilar joints

(carbon-stainless), heat exchangers, chemical and oil industry, Inconel 600 and Incoloy 800.

522015014in3/16

818012014in5/32

111409014in1/8

181007512in3/32




Certifications:

ABS, Lloyd Register


Description: Nickel-based electrode with high chromium and niobium. Specially designed to provide high mechanical strength welds

and toughness. It has outstanding elasticity being ideal for ductile demand. AC, DCPE. Flat, Horizontal & Vertical Position.

Typical Applications: joining of alloys type Inconel 625 and Incoloy 825. Joints of high chrome-nickel alloys or with stainless steel.

Tanks for cryogenic transport, storage tanks for Ni steels (5%-9% Ni), valve seat, machinery repair, tanks for corrosive products,

904 and 904L alloys.

722015014in3/16

1018012014in5/32

141409014in1/8

291007512in3/32




Certifications:

ABS, Lloyd Register


Description: Nickel-based electrode characterized by producing a smooth and stable arc of spray transfer. The deposit has

excellent appearance and easy slag removal. Resistant to high temperatures 2,010F (1,100C) for extended periods, in addition to

resistance to stress corrosion and hot cracking. AC, DCPE. Flat & Horizontal Position. GRAY

Product Catalogue - 2014Strongweld Cast Iron Electrodes

COLD CAST 77 – AWS E-St

NI 375 – AWS ENi-Cl

NI 55 – AWS ENiFe-Cl

NI 99 – AWS ENi-Cl

0.01% - balance

Typical Applications: recommended for repairs of cast iron where the deposits do not require subsequent machining. Engine heads,

machine parts, engine blocks.

918014014in3/16

1216011014in5/32

171208014in1/8

35805012in3/32



S - Fe0.49%Mn

0.08% - 0.015%Si - P0.10%C

Description: mild steel core with a cinnamon coating that acts as flux controlling the arc. It has a melting point low enough to allow

use of low currents, an important feature in the welding of cast iron as it reduces hardening in the fusion point. AC, DCPE. All

Position.

0.53% - 46%

Typical Applications: recommended for all types of cast iron, specially, nodular cast iron. Recovery of valve bodies, bodies and

pump lids, drums stranding, exocentric shaft crushers.

716012014in3/16

1014010014in5/32

151108014in1/8

31805012in3/32



Cr - Fe0.54%Mn

0.13% - 0.015%Si - P0.91%C

Description: nickel-iron deposit specially designed for joining and repair cast iron pieces with high percentage of phosphorus,

nodular and spheroid cast iron without preheating. Deposit has high strength, excellent appearance free of cracks and porosity. AC,

DCNE. All Position.

0.15% - 2.70%

Typical Applications: recommended for all types of cast iron, specially, nodular cast iron. Recovery of valve bodies, bodies and

pump lids, drums stranding, exocentric shaft crushers.

716012014in3/16

1014010014in5/32

151108014in1/8

31805012in3/32



Cr - Fe0.18%Mn

0.11% - 0.006%Si - P0.74%C

Description: nickel-iron deposit designed for joining and repair gray cast iron. It delivers smooth homogeneous welds, free of

porosity (even in parts contaminated with oil) and is of higher strength and ductility than the base metal. Easy slag removal. AC,

DCNE. All Position.

2.50% - balance

Typical Applications: recommended for cast iron filling and repair where the deposit needs to be machined: engine blocks, cams

and differentials.

716012014in3/16

1014010014in5/32

151108014in1/8

31805012in3/32



Fe - Ni1.00%Mn

0.45% - 0.02%Si - P1.10%C

Description: nickel-iron deposit designed for cast iron. It delivers smooth homogeneous welds, free of porosity (even in parts

contaminated with oil) as carbon is expelled from the solution as graphite. Easy slag removal. AC, DCNE. All Position.

Product Catalogue - 2014Strongweld SPECIAL Electrodes

ALUM 43 – AWS E-4043

INDURA SPEED CUT

SEAWELD 14 – AWS E-7014

INDURA SPEED CHAMFER

Typical Applications: aluminum tanks, pipes, heavy cast, shelves, dies, engine

blocks and pistons.


18%Elongation in 2in

Certifications:

ABS, Lloyd Register

36 ksiTensile Resistance

Description: electrode for joining, filling and repair of aluminum with a high

deposition rate. Its operation is smooth and it is easy to control the bead due to

great arc stability at low amperage. DCPE. Flat, Horizontal & Vertical Position.

Typical Applications: non structural underwater repairs.


Diameters: 1/8, 5/32 and 3/16.

Description: designed for underwater welding of carbon steel with same

characteristics as conventional E7014. Easy arc start, high performance and good

penetration. The arc is smooth and stable in submarine applications.

Typical Applications: high speed cutting in all positions. It is recommended for use on all metals,

specially those that present difficulties to be cut or drilled when treated with oxy-fuel equipment,

such as: cast iron, stainless steel, nickel alloys, bronze, copper and aluminum.

833025014in3/16

1028022014in5/32

1625020014in1/8



Description: electrode designed to cut and drill all metals with AC or DCNE. It is a high speed

electrode and its special refractory type coating prevents the core to preheat and focuses the arc

force to achieve smooth and clean cuts.

Typical Applications: for beveling, chamfering, slotting and grooving any metal both ferrous and non

ferrous.

550035014in3/16

740030014in5/32

1125020014in1/8



Description: electrode specially formulated for edging and chamfer in all metals. It does not require

oxygen nor expensive equipment and it is very easy to apply. Withstands high amperage

unaffected because of its refractory coating and allows smooth and clean bezels and channels. AC

or DCNE and applicable in any position on difficult or impossible metals to bevel with oxyacetylene

equipment. DARK GRAY COATING

Product Catalogue - 2014Strongweld SPECIAL Electrodes

INDURA ROCKET GROOVE

INDURA SEA CUT

Strongweld OXYCUT

Strongweld 2209 – AWS E2209-16

Typical Applications: underwater cutting of ferrous and non ferrous metals, rocks and concrete,

organic materials.

16015036in 24in & 18in3/8

Max AmpMin AmpLengthDiameter

Packaging: 22lb boxes

Description: exothermic cutting electrode using oxygen reaction. It can be used with underwater

cutting torch for 3/8. The oxygen flow required varies with the depth at which the welder is

operating. It reaches temperatures up to 9,930F (5,500C) being able to melt almost any material. It

has a cover that provides electric insulation.

Typical Applications: cutting rebar, carbon steel plates up to 2in thickness, locks, extracting bolts,

SAG mill repair, rescue operations.

1208036in 24in & 18in3/8



Description: exothermic cutting electrode using oxygen reaction. It allows cutting, drilling and

torching with high control of the results due to its easy handling. It requires a special torch for its

use. It consists of a coated steel tube with concentric symmetrically distributed steel rods on the

inside to maximize oxygen flow. It reaches temperatures up to 9,930F (5,500C) being able to melt

almost any material.

15012014in1/8

25015014in5/32

Typical Applications: removal of cracks, to eliminate defects or excess of material, to create clean

bezels and channels.

35025014in3/16


Packaging: 10lb boxes & 50lb boxes (both with 5lb alum bags inside)

Description: specially designed for chamfering and edging metals. All position AC, DCNE. Very

easy to apply and does not require special costly equipment. It is applicable in any metal

impossible or difficult to bevel with oxyacetylene equipment.

3.00%

10.1%

Typical Applications: recommended for welding duplex stainless steels containing aprox.

22% Cr, 5% Ni and 3% Mo (type 2205)

27%Elongation:115 ksiTensile Resistance:


Mo0.38%Si

Ni1.01%Mn

22.9%Cr0.03%C

Description: electrode that has a duplex structure consisting in an austenitic-ferric matrix.

The deposit has high resistance to traction with improve resistance properties to corrosion

under tension and for cavity. Spray transfer with low spatter. Excellent moisture resistance.

AC, DCPE. All Position.

Product Catalogue - 2014Strongweld Stainless Steel Electrodes

Strongweld 19-9 – AWS E308-16

Strongweld 308L – AWS E308L-16


Strongweld 309MoL – AWS E309LMo-16

0.07%

10.2%

Typical Applications: welding of base metals with similar composition stainless steels AISI

301, 302, 304 and 305, containing 16-21% Cr and 8-13% Ni and high carbon content.

Temperatures up to 1,382F



Mo0.67%Si

Ni0.54%Mn

18.7%Cr0.05%C

Description: electrode with typical composition of 19% Cr and 10% Ni. Highly resistant to

sigma phase embrittlement. Easy slag removal and excellent presentation of the cord. AC,

DCPE. All Position.

0.07%

10.2%

Typical Applications: welding of 309L and 309Cb stainless steels. Its deposit has excellent

corrosion resistance at room temperature but, primarily, designed to resist oxidation at high

temperatures 1,832F.



Mo0.67%Si

Ni0.54%Mn

18.7%Cr0.05%C

Description: electrode for austenitic stainless steel with rutile coating. It has a stable arc

spray transfer and a deposit with excellent shape and appearance. The slag is easily

removed besides having good arc resumption. AC, DCPE. All Position.

Typical Applications: especially recommended for corrosion resistant applications where there is a possibility of a cavity produced

by sulfuric acid and sulfur, sulfite and cellulose solutions. SS 304, 304L, 308, 308L, 321, 347, 348. Chemical & petrochemical

industries, paper mills.

519015014in3/16

1015012014in5/32

141209014in1/8

27906012in3/32


Packaging: 2lb and 5lb vacuum aluminum bags, 10lb canisters & 50lb boxes (both with 5lb alum bags inside)


Certifications:

ABS, Lloyd Register


Description: rutile coating electrode for austenitic stainless steel, designed primarily for welding stainless steel with extra low carbon

content. Characterized by a stable arc spray transfer which deposit is of excellent shape & appearance. AC or DCPE. All Position.

2.39%

12.5%

Typical Applications: welding of dissimilar steels, specially between stainless steels and

carbon or low alloy steels. Also, for welding stainless steels that contain Cr-Ni-Mo Joints for

AISI 309 MoL steels and for Clad Steel repairs type AISI 316 and 316L.



Mo0.51%Si

Ni0.73%Mn

22.3%Cr0.02%C

Description: electrode for austenitic stainless steel with rutile coating, similar to 309Mo but

with reduced carbon content, which reduces the possibility of corrosion. AC, DCPE. All

Position.

Product Catalogue - 2014Strongweld Stainless Steel Electrodes

Strongweld 25-20 – AWS E310-16


Strongweld 29-9S – AWS E312-16

Strongweld 347 – AWS E347-16

Typical Applications: specially designed for welding stainless steels of type 310 and 314 which require a high tensile strength and

corrosion resistance up to temperatures of 1,922F. It can also be used to weld stainless steel of unknown composition and stainless

steel of carbon steel. Ideal for acid tanks, stuffing of axes, containers and pipes subject to temperature.

522515014in3/16

1016012014in5/32

141209014in1/8

271007012in3/32




Certifications:

ABS, Lloyd Register


Description: rutile electrode for austenitic stainless steel, characterized by stable arc spray transfer deposit which is of excellent

shape and appearance. AC or DCPE. All Position.

Typical Applications: recommended for welding high strength steels type 312 and steels of different composition in which one is

high in nickel. Repair of shafts and gears, stuffing of difficult harden-able steel. SS 312-314 & 303. Welding of difficult steels.

522515014in3/16

1016012014in5/32

141209014in1/8

251007012in3/32




Certifications:

ABS, Lloyd Register




Typical Applications: primarily designed for welding austenitic stainless steels with extra low carbon content. Specially

recommended for corrosion resistant applications subject to acid attack. SS 316, 316L, 317, 317L, 316Ti and 318. Tanks containing

corrosives. Paper, chemical and petrochemical industries.

722515014in3/16

1016012014in5/32

141209014in1/8

271006012in3/32




Certifications:

ABS, Lloyd Register




Typical Applications: primarily designed for welding austenitic stainless steels with extra low carbon content. Specially

recommended for corrosion resistant applications subject to acid attack. SS 316, 316L, 317, 317L, 316Ti and 318. Tanks containing

corrosives. Paper, chemical and petrochemical industries.

722515014in3/16

1016012014in5/32

141209014in1/8

271006012in3/32




Certifications:

ABS, Lloyd Register





Due to our exceptional expertise with the mining, petrochemical, shipbuilding, maritime, wine, agricultural and seismic construction industries, in extreme environments (high altitude, salt corrosion, freezing temperatures, extreme temperature variations, high depths). We have developed many special electrodes for highly specific applications.

If you don’t see what you need, or you believe you might require something more specific, please don’t hesitate contacting us. We most probably will have what you are looking for or we may use our experience to help you find what is right for you.

Why? Because we really care...

MiningShipbuilding

WinemakingMetal Fabrication

AntiAnti--seismicseismicstructuresstructures Heavy machinery

Product Catalogue - 2014Strongweld ARC Welding Machines

Indura 165 CV EVOLUTION


430x250x340Dimensions (H x W x D) mm

18.9Weight (Kg)

150A @ 20%Rated Output

55-150 DCOutput Range

110v 1Ph 60HzInput Power

A simple, affordable, portable SMAW (manual arc) transformer-type AC welding machine. Fan ventilation. Voltage regulated by mobile shunt. Over-current protection by thermostat. Easy and fast connectivity. Ideal for welding window frames, fences, locks and light structures.

Includes: stick holder set, ground clamp and cable set, hand welding shield and slag hammer.


21.4Weight (Kg)




Portable SMAW (manual arc) transformer-type welding machine, similar to 165CV but with more power. Fan ventilation. Voltage regulated by mobile shunt. Over-current protection by thermostat. Easy and fast connectivity. Ideal for welding window frames, fences, locks and light structures.




Indura 230 CV


21.4Weight (Kg)




With more muscle, this simple, affordable, portable SMAW (manual arc) transformer-type AC welding machine. Fan ventilation. Voltage regulated by mobile shunt. Over-current protection by thermostat. Easy and fast connectivity. Ideal for welding window frames, fences, locks and light structures.



26Weight (Kg)




For semi-industrial users. Portable SMAW (manual arc) transformer-type AC welding machine. Fan ventilation. Voltage regulated by mobile shunt. Over-current protection by thermostat. Easy and fast connectivity. Ideal for welding window frames, fences, locks and light structures.



Indura 250

Indura 250S


43.5Weight (Kg)



208-220v 1Ph 50-60HzInput Power

Italian semi-industrial AC SMAW welding machine. Shunt mobile voltage regulation and lower power loss. Excellent voltage in open circuit which allows welding with a wide variety of electrodes. Guaranteed duty cycle. Easy to operate. Typical uses: welding metal profiles, light metal fabrication, light structures.

Includes: stick electrode holder set, ground clamp and cable set.


73.5Weight (Kg)

250A @35%Rated Output



Italian semi-industrial DC SMAW transformer-type welding machine. Shunt mobile voltage regulation and rectifier to provide DC. Excellent voltage in open circuit which allows welding with a wide variety of electrodes. Guaranteed duty cycle. Easy to operate. Typical uses: welding metal profiles, metal fabrication, light and medium structures.

Includes: stick electrode holder set, ground clamp and cable set.


Indura 400HD

Indura DELTA POWER 630E


114Weight (Kg)




Italian heavy-industrial DC SMAW/TIG transformer-type welding machine. Shunt mobile voltage regulation. Forced fun ventilation. Silicon diodes.

Typical uses: fabrication and repair of metal profiles and studs, metal fabrication, structural fabrication.


195Weight (Kg)




Italian heavy-industrial DC SMAW/CAG welding machine with control circuit and solid state power. Over-current protection. Digital power and voltage meters. Current fluctuation compensation function. Arc strength adjusting function. Protection class IP21S.

Typical uses: shipyards, construction, boiler fabrication

Product Catalogue - 2014Strongweld ARC Welding Machines - Inverters

INVERWELD 1600 ARC/TIG

COMPACTWELD 100

BY KEMPPIIndura’s version of the popular lightweight MMA/TIG Minarc ideal for use in workshop and site environments. Tolerates large fluctuations of input voltage making it excellent in field conditions with long cables or supply generators. Designed with portability and outdoor use in mind, it has a durable casing, ease of carry with its shoulder strap and well-protected control knobs. Protection against overload, over voltage, humidity and dust ingress gives excellent reliability. TIG welding is made possible with the scratch-TIG function. It is also available with a VRD function - lower open circuit voltage for welding in dangerous environments.

”Weld Anywhere” tool due rugged

construction and mobility -works with

generator and long supply cable- Superior

arc performance with wide range of

electrodes including cellulosic electrodes •

User-friendly - easy to find correct welding

values due to automatic Hot Start and Arc

Force130x275x310Dimensions mm

4.6Weight (Kg)


5-150 DC/ACOutput Range

220v 1Ph 50-60Hz120v 1Ph 50-60Hz

Input PowerAC/DC


4Weight (Kg)



120v 1Ph 50-60Hz220v 1Ph 50-60Hz

Input Power

An affordable, easy-to-use, SMAW DC welding inverter that provides a stable arc due to its excellent control system. Portable with a convenient transportation case. IGBT technology that ensures great stability. Over-current and over-heating internal controls.

Typical uses: light structure fabrication and repairs. Includes: electrode holder, welding clamp and cable, hand shield, slag hammer and brush, transportation case.


INDURARC 131

INDURARC 151


7Weight (Kg)



120v 1Ph 50-60Hz220v 1Ph 50-60Hz

Input Power

IGBT DC SMAW Inverter welding machine with energy-save technology for greater power consumption efficiency. Over-current and over-heating control protection. Current control in close lace. Better arc control for easy welding. Made in Italy.

Uses: light structure fabrication and repairs. Includes: electrode holder, clamp and cable and transportation belt.


7.3Weight (Kg)



120v 1Ph 50-60Hz220v 1Ph 50-60Hz

Input Power




INDURARC 181

INDURARC 201


7.9Weight (Kg)



120v 1Ph 50-60Hz220 v 1Ph 50-60Hz

Input Power




8.1Weight (Kg)



120v 1Ph 50-60Hz220 v 1Ph 50-60Hz

Input Power




MINARC 150-151

MINARC 220

Powerful lightweight SMAW welding machines ideal for use in workshop and site environments. Tolerates large fluctuations of input voltage making it excellent in field conditions with long cables or supply generators. Protection against overload, over voltage, humidity and dust ingress gives excellent reliability. TIG welding is made possible with the scratch-TIG function. VRD function -lower open circuit voltage for welding in dangerous environments. Minarc 151 is designed to be used with 110V site transformers.


9.2Weight (Kg)




The Minarc’s superior arc performance is based on high voltage reserves and automatic Arc Force. These guarantee that the arc will stay stable in all positions, with any current and even with extra long cables up to 160ft. Automatic Hot Start gives perfect ignition in all conditions. U/I-welding characteristic curve has been reformed, application for this Anti Sticking function is to degree the risk for MMA electrode sticking to base material. The 220 also has a remote control for easy operation.


4Weight (Kg)


5-150 AC/DCOutput Range

120v 1Ph 50-60Hz230 v 1Ph 50-60Hz

Input PowerAC/DC



GMAW - FCAWMIG & FLUX CORED

Product Catalogue - 2014Strongweld Mild Steel Solid Wire

Strongweld Indura 70S6 – AWS ER-70S-6

MIGMATIC – AWS ER-70S-6

ALSO AVAILABLE AS AWS ER-70S-3

Typical Applications: recommended for use in common low alloy steels. Its Si-Mn content gives excellent deoxidizing properties which ensures a weld free of

porosity over a wide range of jobs. Pressure vessels, pipe welding, metal manufacturing and fabrication, structures. Made in Chile with pure copper and steel

– no recycled content.

12-1434013017-301.2-0.045

8-122309015-270.9-0.035

7-121606014-260.8-0.030

CO2 Flow (lt/min)Max AmpMin AmpVoltageDiameter (mm-in)

Packaging: 11lb (4 in master display) and 33lb spools vacuum sealed in carton boxes. By special order: 1/16 (1.6mm) diameter is available.

Description: this outstanding premium MIG wire made a name for Strongweld in the United States. A solid wire for welding process with gas protection. A

copper plating coating protects the wire and reduces abrasion allowing a smooth and fast feeding, with minimum damage to liner and tip. This carbon steel

electrode offers excellent weldability with high amounts of deoxidizing elements. It provides a deposit with virtually no slag. All positions, DCPE. Certifications:

ABS, Lloyd Register, Germanischer Lloyd, Bureau Veritas, Canadian Welding Bureau. Exceeds AWS and MIL Specs.

Typical Applications: recommended for use in common low alloy steels. Its Si-Mn content gives excellent deoxidizing properties which ensures a weld free of

porosity over a wide range of jobs. Pressure vessels, pipe welding, metal manufacturing and fabrication, structures.

AWS A 5.18/A5.18M-05400AWS: 58 ksi60 ksiFluency Limit

31% (AWS: 22%)ElongationAWS: 70 ksi77 ksiTensile Resistance

14-1640029026-361.6-1/16

CO2 Flow (lt/min)Max AmpMin AmpVoltageDiameter (mm-in)

Packaging: 550lb and NEW! 275lb drums NEW!. Mostly by special order.

Description: this outstanding premium MIG wire made a name for Strongweld in the United States. A solid wire for welding process with gas protection. There

are hundreds of manufacturers for MIG wire worldwide and a bunch of them make a good product that meets or exceeds AWS standards. But there are less

than a handful manufacturers of premium high-performance drums. Strongweld is one of these few. Our drums are a perfect balance of reliability, affordability

and performance. We have two plants in two continents devoted to manufacture second-to-none drums.

Product Catalogue - 2014Strongweld Stainless Steel Solid Wire

STRONGWELD 308L – AWS ER-308L



0.19%

9.8%

Typical Applications: for SS AISI 304L,308, 308L, 321 & 347 types

that can be used in a wide range of corrosive conditions without need

of heat treatment. Equipment for food processing and storage, pumps,

heat exchangers, tanks w/corrosive chemicals.


Packaging: 25lb spools

Mo0.38%Si

Ni1.90%Mn

19.8%Cr0.02%C

Description: SS solid wire offering a well balanced chemical analysis,

resulting in uniform properties of the weld metal. All position DCPE.

2.10%

11.1%

Typical Applications: for austenitic stainless steels type 316, 316L and

318. Especially recommended for corrosion resistant applications

subject to bite (acid attack) No heat treatment neccesary.



Mo0.38%Si

Ni1.69%Mn

18.1%Cr0.02%C

Description: SS solid wire offering a well balanced chemical analysis

and stable spray arc transfer. Its low carbon formula prevents

intergranular corrosion by carbides. All position DCPE.

0.19%

9.8%

Typical Applications: for SS AISI 309L, 304L, 309, 321 and 347. Food

and corrosive chemicals storage & processing equipment .



Mo0.38%Si

Ni1.90%Mn

19.8%Cr0.02%C

Description: SS solid wire without coating for MIG and TIG. Low

carbon reduces the possibility of carbide precipitation and thus

increasing resistance to corrosion. All position DCPE.

Owner

Stamp

Owner

Stamp

Owner

Stamp

Product Catalogue - 2014Strongweld Aluminum & Bronze Solid Wire

STRONGWELD 4043 – AWS ER-4043

Strongweld ER CuAl2 – AWS ER-CuAl-A2


0.02%

Typical Applications: joints of similar composition: manganese, silicon-bronze,

certain copper-nickel alloys and ferrous metals. Also for dissimilar joints:

aluminum-bronze and copper-stainless steel. Applications were resistance to

erosion and corrosion by acid and salt water is required: boat propellers, pumps

and fittings.


0.10%Si

Zn0.02%Pb

1.5%Fe8.5-11%Al

Description: solid brass-aluminum type alloy of high mechanical

strength for copper and ferrous metal alloys. Deposit is corrosion and

wear-by-friction resistant. Flat and horizontal filet position DCPE.

balance

0.1%-0.2%

Typical Applications: tensile strength, ductility and corrosion

resistance surpass those of the metal base. Specially recommended

for welding irons and thick castings. Used in oxyacetylene form needs

Solarflux 202 or All State 31. Aluminums 2014, 3003, 6061 and 4043.


Al4.5-6.0%Si

Zn - Ti0.05%-0.05%Mn - Mg

0.8%Fe0.30%Cu

Description: solid aluminum wire for MIG and TIG. This wire is

characterized by its high quality deposits and an excellent gloss on the

surface of the cords. All position DCPE.

0.06-0.2%

0.4%

Typical Applications: its high tensile strength makes it suitable for

manufacturing and repairing of rolling type fuel tanks. Aluminums

5083, 5096, 5486, 5454 and 5356. General use in tank industries.

Very similar to 4043.


Ti0.25%Si

Fe0.05-0.2%Mn

0.05-0.2%Cr4.5-5.5%Mg

Description: solid welding wire with 5% Mg for MIG and TIG. Very

high quality deposits with a gloss surface finish. All position DCPE.

Owner

Stamp

Product Catalogue - 2014Strongweld Dual Shield – Mild Steel Tubular Wire

STRONGWELD 71V – AWS E-71T-1C/1M

STRONGWELD 81 – AWS E-81T-1Ni-1/2

STRONGWELD 71T-1 – AWS E-71T-1C

STRONGWELD AWS ER-70C-6M

0.01%

0.013%

Typical Applications: extremely versatile for a wide variety of structural

and non-structural applications: heavy machinery, earth moving

equipment, bridges, shipbuilding, off-shore & structures in general.

27%Elongation:88 ksiTensile Resist.:

Packaging: 33-44lb spools, 60lb coils and 550lb drums. Diameters: 045 &1/16

S0.59%Si

P1.44%Mn

0.03%Cr0.03%C

Description: external gas-shielded tubular wire that works with both

CO2 and CO-Ar mix. Designed for welding high strength steels. All

position DCPE. Similar to ESAB 7100 Ultra. Meets AWS D1.8 and

FEMA 353 seismic supplement. ABS-CWB

0.19%

0.01%



equipment, bridges, shipbuilding, structures in general.


Packaging: 33lb spools and 60lb coils. Diameters: 045 &1/16

Mo0.55%Si

S1.25%Mn

0.015%P0.04%C

Description: external gas-shielded tubular wire that works with 100%

CO2. Designed for welding high strength steels. Excellent mechanical

properties, easy slag removal, low spatter generation, smooth bead

shape, high X-ray safety. All position DCPE.

0.01%

0.012%



equipment, bridges, shipbuilding, off-shore & structures in general.


Packaging: 33-44lb spools, 60lb coils and 550lb drums. Diameters: 045 &1/16

S0.35%Si

P1.17%Mn

2.03%Ni0.03%C

Description: external gas-shielded tubular wire that works with both

CO2 and CO-Ar mix. Designed for welding high strength steels. Meets

AWS D1.8 and FEMA 353 seismic supplement. ABS-CWB

0.01%

0.012%

Typical Applications: intended for semi-automatic, automatic, single &

pass welding: heavy machinery, bridges, shipbuilding & general

fabrication.


Packaging: 33-44lb spools, 60lb coils and 550lb drums. Diameters: 045, 055 &1/16

S0.35%Si

P1.17%Mn

2.03%Ni0.03%C

Description: ultra high performance self-shielded tubular wire. KIt

feature good penetration, high resistance to porosity, good wetting

behavior as well as low hydrogen content. Meets AWS D1.8 and

FEMA 353 seismic supplement. ABS-CWB. DCPE, Vertical & Flat

Positions.

Product Catalogue - 2014Strongweld Innershield – Mild Steel Tubular Wire

STRONGWELD 71T-8 – NR232

STRONGWELD 21 – AWS E-71T-11

STRONGWELD 70T-4 – AWS E-70T-4

All our wires and electrodes are certified to meet or exceed AWS and MIL specs. Our structural wires and

electrodes meet all required standards, including: AWS Seismic D1.8 and FEMA 353..

0.01%

0.015%

Typical Applications: specially designed for seismic zones applications

due to its high impact resistance, at low temperatures, ductility and

low hydrogen deposit: heavy machinery, buildings, bridges,

shipbuilding, scaffolding & structures in general.


Packaging: 11, 25 & 33lb spools, 60lb coils & 550lb drums. Diameters: 045, 072, 1/16, 5/64

& 3/32

S0.65%Si

P1.40%Mn

0.03%Cr0.04%C

Description: self-shielded tubular wire designed for structural welding

of high strength steels. All position DCNE. Similar to Lincoln NR232.

Meets AWS D1.8 and FEMA 353 seismic supplement. ABS-CWB

0.01%

0.015%

Typical Applications: general fabrication & structural work requiring no

impact properties.



& 3/32

S0.65%Si

P1.40%Mn

0.03%Cr0.04%C

Description: self-shielded multi-pass tubular wire designed for windy

outdoor applications in high strength steels. It has good arc stability,

low spatter generation, high efficiency, good bead shape and slag

removal. Flat and angular positions. DCPE.

0.01%

0.015%

Typical Applications: Typical applications include general fabrication

and structural work requiring no impact properties (ASTM A36 Gr. All;

A109 Gr. All; A283 Gr. A,B,C,D; A284 C,D; A285 Gr. A,B,C; A288 Gr.

1; A372 type; A500 Gr. All; A501 Gr. all)



& 3/32

S0.65%Si

P1.40%Mn

0.03%Cr0.04%C

Description: self-shielded tubular wire designed for structural welding

of 490Mpa steels. All position DCNE. Similar to Lincoln NR211.

Meets AWS D1.8 and FEMA 353 seismic supplement. ABS-CWB

Product Catalogue - 2014Strongweld Selfshield – Hardfacing Tubular Wire

TUBE ALLOY 255-0

TUBE ALLOY 258-0

TUBE ALLOY 255-G

TUBE ALLOY BUILD UP - OVERLAY

Typical Applications: for filing low alloy, carbon based metals,

austenitic manganese steels: drills, earthmoving machinery,

bulldozer loader bucket, rollers, crushers, feeding screws.

Packaging: 33lb spools and 60lb coils

Diameters: 045, 7/64

Description: self-shielded tubular wire designed to provide

deposits of extra high Cr-C steel alloy with elevated resistance

to extremely severe abrasion at high temperatures up to

1,238F (670C) Can be used also in SAW.

Typical Applications: rock drills, earthmoving machinery,

bulldozer loader bucket, rollers, crushers, hummers, screws;

sand, cement or mineral chutes, harvesting equipment, shrank

rippers, trailing dredgers, selection sieves.


Diameters: 045

Description: dual-shielded tubular wire designed to provide Hardfacing

with elevated resistance to severe abrasion. Deposit is carbon-

chromium alloy. This wire has excellent performance with Martensitic

deposits at a rate of 9:1. Tension release cracks will appear but they

won’t affect abrasive resistance.

Typical Applications: coupling housing, torque transmission,

dragline chains, mill fingers.


Diameters: 045 & 1/16


deposits of Martensitic steel comparable to those in H12 tools.

It has an outstanding metal-to-metal abrasive resistance, as

well as good impact resistance up to 1,004F (540C) Use as

buildup.

Typical Applications: crane wheels, gear cogs, mining cart

wheels, steel axles, rotating chains.


Diameters: 1/16 & 7/64


deposits of low-alloy steel. Designed for build up on carbon

steels and low alloy steels. Welded metal has good impact

and compression resistance making it an excellent base for

abrasive resistant overlays. Deposit is machinable and has

high resistance against cracking. Not suitable for joints.

Product Catalogue - 2014Strongweld Dual Shield – Mild Steel Tubular Wire

STRONGWELD AWS E-308LT1-1

STRONGWELD AWS E-309LT1-1

STRONGWELD AWS E-316-LT1-1

Also available, by special order:

Self Shielded Stainless Steel Wire

Strongweld 308LO – AWS E-308LTO-3

Strongweld 309LO – AWS E-309LTO-3

Typical Applications: MAG welding of stainless steel type

18%Cr-8%Ni -low carbon content. Stainless steel AISI 304,

304L, 304LN, ASTM A157 gr. C9, A320 gr. B8C or D.


Diameters: 045

Description: dual-shield tubular wire designed to provide

deposits with optimum ferrite content in its austenitic structure

and therefore, having excellent weldability, low possibility for

cracking and improved creep resistance at high temperatures.

Gas protection: 100% CO2 or 80-20 Mix


22%Cr-12%Ni-2%Mo -low carbon content. Its low carbon

content provides good resistance against metal corrosion.


Diameters: 045


deposits with optimum ferrite content in its austenitic structure.

Easy to operate with powerful penetration and spray transfer,

offering minimum spatter and self-removable slag. Excellent

weldability and minimum crack. Gas protection: 100% CO2 or

80-20 Mix


22%Cr-12%Ni -low carbon content. Dissimilar joints between

high resistance steels. Stainless steels 309 and 309Cb.


Diameters: 045


deposits with high ferrite in its austenitic structure. Easy to

operate with powerful penetration and spray transfer, offering

minimum spatter and almost no slag. Gas protection: 100%

CO2 or 80-20 Mix

Product Catalogue - 2014Strongweld SPECIALTY Tubular Wire

AVAILABLE BY SPECIAL ORDER OF 4,000LB OR MORE:

High Tensile Steel:

STRONGWELD E61T-GSTRONGWELD E70T-1C/1MSTRONGWELD E70T-5MSTRONGWELD E71T-5C/5MSTRONGWELD E70T-1CSTRONGWELD E70C-3CSTRONGWELD 55TSTRONGWELD E81T1-Ni1CSTRONGWELD 81T1-Ni1MSTRONGWELD 80T1-Ni1CSTRONGWELD 82TMSTRONGWELD E80G-CSTRONGWELD E91T1-G H4STRONGWELD 100K3MSTRONGWELD 110K3MSTRONGWELD 115TK4MSTROGWELD E121T1-G

Self Shielded Multi-Pass:

STRONGWELD E70T-10

Corrosion Resistant Steel

STRONGWELD 71TSSTRONGWELD E81T1-W2C

S45C Pipe Welding:

STRONGWELD 45CT-Pipe

Heat Resistant Steel

STRONGWELD E81T1-A1CSTRONGWELD E81T1-B2CSTRONGWELD E81T1-B2LCSTRONGWELD E91T1-B3CSTRONGWELD E91T1-B3LCSTRONGWELD E81TB6STRONGWELD E91T1-B9M

Product Catalogue - 2014Strongweld SPECIALTY Tubular Wire

AVAILABLE BY SPECIAL ORDER OF 4,000LB OR MORE:

Low Temperature Service Steel:

STRONGWELD E71T-1C/-9CJ H4STRONGWELD E71T-12CJ H4STRONGWELD E71T-12MJ H4STRONGWELD 71TPSTRONGWELD E80T1-K2C H4STRONGWELD E81T1-K2C H4STRONGWELD E91T1-K2C H4

Electro Gas Welding:

STRONGWELD EG70T-2STRONGWELD EG70T-G

Hardfacing:

STRONGWELD Hv250HTSTRONGWELD Hv300HTSTRONGWELD Hv350HTSTRONGWELD Hv450HT

Hardfacing Cont.:

STRONGWELD Hv500HTSTRONGWELD Hv600HTSTRONGWELD Hv700HTSTRONGWELD Hv800HTSTRONGWELD CXA-40HTSTRONGWELD CXA-41HT

Stainless Steel:

STRONGWELD 317LT1-1STRONGWELD 347T1-1STRONGWELD 329T/TESTRONGWELD 325TSTRONGWELD 409TiCSTRONGWELD EC430STRONGWELD 436TSTRONGWELD EC439STRONGWELD 410NiMo

Product Catalogue - 2014Strongweld MIG Welding Machines

INDURA MIG AMIGO 181

INDURA MIG AMIGO 201 PRO


41Weight (Kg)



120v 1Ph 50-60Hz220 v 1Ph 50-60Hz

Input Power

GMAW -solid MIG- welding machine with step-by-step current regulation for light duty applications. Fan ventilated. Welding LINER INCLUDED.

Includes: MIG gun and liner, clamp and cable, gas flow regulator and mobility cart.


52.5Weight (Kg)



220 v 1Ph 50-60HzInput Power

GMAW -solid MIG- welding machine with step-by-step current regulation for medium duty semi-industrial use. Fan ventilated. Welding liner included. Digital panel and “burnback” time (BBT) control to reduce wire burn back potential.






68Weight (Kg)



220 v 1Ph 50-60HzInput Power

GMAW -solid MIG- welding machine with step-by-step current regulation for medium duty semi-industrial use. Fan ventilated. Welding liner included. Digital panel and “burnback” time (BBT) control to reduce wire burn back potential.


75

365x560x630

260A @40%

30-280 DC

380v 3Ph 50-60Hz440v 3Ph 50-60Hz


86.5Weight (Kg)



380v 3Ph 50-60Hz440v 3Ph 50-60Hz

Input Power

GMAW -solid MIG- DC constant voltage welding machine with IP 22 step-by-step current protection for heavy-duty industrial use. Fan ventilated, spot welder with timer. Welding liner included. Digital panel and “burnback” time (BBT) control to reduce wire burn back potential. Energy saving features for low power usage.



INDURA MIG AMIGO 413/C

INDURA MIG AMIGO 453


131Weight (Kg)


30-400Output Range

380v 3Ph 50-60Hz440v 3Ph 50-60Hz

Input Power

Italian GMAW and FCAW welding machine with 4 roller feeder set. Solid state circuit design with forced air ventilation. Over-current protection class IP-22. Equipped with 24 different regulation positions.



160Weight (Kg)


30-400Output Range

380v 3Ph 50Hz440v 3Ph 60Hz

Input Power

Italian GMAW and FCAW welding machine with 4 roller feeder set. Solid state circuit design with forced air ventilation. Over-current protection class IP-22. Equipped with 24 different regulation positions. Detachable 4-wheeled header for independent mobility.



MINARC ADAPTIVE 150 MIG/MAG

MINARC ADAPTIVE 181 MIG/MAG


9.4Weight (Kg)


20-150Output Range

230v 3Ph 50-60HzInput Power

Revolutionary in ease of use, MinarcMig™ is ideal for both professional or hobby use. MinarcMig™, small and lightweight machines, make it easy to ‘weld anywhere’ and are made to move with you. MinarcMig™ machines have Adaptive Control, which accurately takes care of the welding parameters. Simply select the plate thickness from one knob control, pull the gun trigger and weld. MIG welding has never been so easy! MinarcMig™ 150 Adaptive is a high duty Steel specialist. A 150A machine with 35% duty cycle and excellent power and weight ratio makes a class leading machine that’s certainly out of the ordinary.


9.8Weight (Kg)


20-180Output Range

230v 3Ph 50-60HzInput Power

Revolutionary in ease of use, MinarcMig™ is ideal for both professional or hobby use. MinarcMig™, small and lightweight machines, make it easy to ‘weld anywhere’ and are made to move with you. MinarcMig™ machines have Adaptive Control, which accurately takes care of the welding parameters. Simply select the plate thickness from one knob control, pull the gun trigger and weld. MIG welding has never been so easy! MinarcMig™ 180 Adaptive creates a new dimension in compact MIG machines for Al, SS and Fe filler wires. The large and clear LCD user interface indicates the amperes, voltage and wire feed speed selected including material and gas combination when automatic mode is on


KEMPOMAT 2500/3200/4200 MIG/SMAW

FASTMIG PULSE 350/450 MIG/SMAW

PROEVOLUTION 3200-5200 MIG/TIG

Also available, by special order:

Kemppi – The joy of welding

We are one of the largest dealers of Kemppiequipment worldwide and now, we bring to the U.S.

these advanced equipments.



GTAWTIG Welding

Product Catalogue - 2014Strongweld TIG Rods

STRONGWELD 70S 3 – AWS ER-70S-3

STRONGWELD 25 – AWS ER-1100 STRONGWELD 26 – AWS ER-4043

STRONGWELD 70S 6 – AWS ER-70S-6

Typical Applications: low alloy common steels in single and multiple

passes. Steels with moderately dirty or rusty surfaces. Steels: ASTM

A36, A285-C, A515-55 and A516-70.

200186239.4 - 10003.2 - 1/8

200041239.4 - 10002.4 - 3/32

SAP CodeLength (in-mm)Diameter (mm-in)


Description: TIG rod with excellent deoxidizing properties due to its Si

and Mn content, ensuring a porosity-free weld for a wide scope of works.

200036439.4 - 10001.6 – 1/16

200029139.4 - 10002.0 – 5/64

Typical Applications: joining and repairing carbon steel low-alloy pieces. Joining

boiler pipes and tubes. Welding root pass for optimal radiographic quality.

200040939.4 - 10003.2 - 1/8

200036339.4 - 10002.4 - 3/32



Description: mild steel TIG rod with high percentage of deoxidizing elements with

similar characteristics to MIG Wire ER70S-6.

100590539.4 - 10004.0 – 5/32

100590639.4 - 10004.8 – 3/16

100599239.4 - 10001.6 – 1/16

100590339.4 - 10002.4 - 3/32

Typical Applications: joining and repairing aluminum with grade 1060, 1350, 3003,

1100. Appropriate for pieces to be anodized due to its excellent electric

conductivity. Food and dairy industries, refrigeration equipments.

100590739.4 - 10006.4 – 1/4

100590439.4 - 10003.2 - 1/8



Description: pure aluminum TIG rod (99% Min) for GTAW (TIG) and oxyacetylene

use.

100591039.4 - 10004.0 – 5/32

100594539.4 - 10001.6 – 1/16

100590839.4 - 10002.4 - 3/32

Typical Applications: joining and repairing aluminum alloys up to 7% Si and alloys

with less than 2% of other alloy elements: type 2014, 3003, 6061.

100591139.4 - 10004.8 – 3/16

100590939.4 - 10003.2 - 1/8



Description: aluminum TIG with 5-6% Si for GTAW (TIG) and oxyacetylene use.

The deposit are smooth with outstanding appearance and bright.



STRONGWELD 309L – AWS ER-309L STRONGWELD 316 – AWS ER-316L


Typical Applications: joining and repairing pieces of Al-Mg alloy as: 5083,

5096, 5486, 5454. Fabrication and repairing of moving fuel tanks.

100588036in2.4 - 3/32

100630036in1.6 – 1/16

SAP CodeLength Diameter (mm-in)


Description: aluminum TIG rod for GTAW (TIG) and oxyacetylene use. Its

5% Mg content gives great resistance to traction and corrosion –specially

in sea water- with great ductility. Appropriate for pieces that will be

anodized.

102272036in2.4 - 3/32

102272136in1.6 – 1/16

Typical Applications: joining and repairing stainless steel pieces type:

301, 302, 304, 304L, 321

102464536in4.0 - 5/32

102366936in3.2 – 1/8

SAP CodeLengthDiameter (mm-in)


Description: austenitic SS TIG with ultra low-carbon content to avoid

precipitation of Cr-C. Deposit with high resistance in a wide variety of

corrosive environments.

Typical Applications: joining and repairing pieces of stainless steels types

309, 309 Cb, 12% Ni steels, and carbon and low-alloy steels with

stainless steel.

102371036in2.4 - 3/32

102464436in2.0 – 5/64



Description: austenitic SS TIG rod with ultra low-carbon content to inhibit

precipitation of Cr-C. Deposit is resistant to heat and inter-crystal

corrosion.

102270836in2.4 - 3/32

Typical Applications: joining and repairing pieces of austenitic stainless steels

containing 16-21% Cr, 10-15% Ni, 0-3% Mo both stabilized and not stabilized:

316, 316L, 318. Root pass in tanks and pipes for chemical, dairy and food

industries.

102272236in3.2 – 1/8

102270936in2.0 – 5/64



Description: austenitic SS TIG rod with ultra low-carbon content to inhibit

precipitation of Cr-C. Deposit is resistant to heat and inter-crystal

corrosion.


STRONGWELD AWS ER-80S-B2

STRONGWELD AWS ER-Ti-2

STRONGWELD AWS ER-90S-B3

100595636in2.4 - 3/32

Typical Applications: joining and repairing steels 1 ¼ Cr – ½ Mo as

ASTM 335 Gr P2, P11, P12. Boiler and oven pipes subject to high

temperatures.

100600336in3.2 – 1/8

100595536in1.6 – 1/16



Description: steel TIG rod with Cr & Mo. Very resistant to heat and

corrosion.

Typical Applications: joining and repairing steel 2 ¼ Cr – 1 Mo as ASTM

335 Gr P22 and similar. Oil industry pipes where service is required at

high temperatures.

100595736in2.4 - 3/32

100595936in1.6 – 1/16



Description: steel TIG rod with chromium and molybdenum at higher

concentrations than 80S-B2 which improves even further its resistance to

corrosion and high temperatures.

Typical Applications: seawater environments, chemical process

heat exchangers, pressure vessels, cellulose pulp bleaching,

electrochemical and chemical storages.

100601936in2.4 - 3/32

100600936in1.6 – 1/16



Description: this TIG rod is commonly referred as Pure Titanium.

Widely used for its great balance between resistance,

machinability and weldability.

By Special Order – Oxy Gas Rods:

Silver Rods:

- AG 6% Rod – AWS B Cu P-4

- AG 15% Rod – AWS B Cu P-5

- AG 35% FC Rod – AWS B Ag-2

- AG 45% FC Rod – AWS B Ag-5

- AG 50% FCFX – AWS B Ag-9

Tungsten Carbide:

- Tungsten Drill

- Borium

Tin Rods:

- Tin (Sn) Rod

- Galvanizing Rod

Bronze Rods:

- Strongweld 17 – AWS R-45

- 127 FX – AWS RB CuZn-C

- 128 FX – AWS RB CuZn-D

Product Catalogue - 2014Strongweld TIG Welding Machines - Inverters

ARCTIG 160HF

INVERTIG 130/150/200 CEL


8.3Weight (Kg)


5-160Output Range

120v 1Ph 50-60Hz230v 1Ph 50-60Hz

Input Power

Italian inverter-type TIG welding machine with an advanced welding process control that allows a very stable arc. High frequency arc start. Designed with IGBT technology for optimum welding current stability and electronic control systems to protect the device against overheating and over-current. Capable of welding SMAW and GTAW.

Typical uses: fabrication and repair of light structures, general repairs, tanks, pipes and fittings.

Includes: WP-17 TIG gun, electrode holder, clamp and cables, gas hose, consumables, hand shield and slag hammer and brush.

3.9

130x235x290

110A @35%

25-110

120-230v 1Ph 50-60Hz

130 CEL

4.8

130x235x310

140A @30%

10-140

120-230v 1Ph 50-60Hz

150 CEL 200 CELModel


11.9Weight (Kg)


5-190Output Range


Italian inverter-type ARC/TIG welding machines with an advanced welding process control that allows a very stable arc. Automatic hot start. Designed with IGBT technology for optimum welding current stability and electronic control systems to protect the device against overheating and over/low-current. Capable of welding SMAW and GTAW. They work with both AC/DC power input (130 CEL: 6Kva, 150 CEL: 7.5Kva and 200 CEL: 11Kva) Transporting case included.

Typical uses: fabrication and repair of light structures, general repairs, tanks, pipes and fittings.

Product Catalogue - 2014Strongweld TIG Welding Machines - Inverters

MINARC TIG 180/180MLP/250/250MLP

MASTER TIG MLS 2300/3000/3500 AC/DC

8.4 / 7.8

400x180x340

180A @35% / 180A @40%

5-180

220/230v 1Ph 50-60Hz

TIG 180 / TIG 180 MLP

10.7

400x180x340

220A @35% / 220A @40%

5-220

380v/440v 3Ph 50-60 Hz

TIG 250 / TIG 250 MLPModel

Dimensions (H x W x D) mm

Weight (Kg)

Rated Output

Output Range

Input Power

Another family of outstanding inverter-type GTAW & SMAW welding machines by Finland’s Kemppi. Small and light for excellent portability although powerful as much larger and heavier traditional heavy-duty machines. They work both with AC and DC power sources. Able to weld any type of electrode. Led digital control panel and reliable arc and current electronic control systems. TIG gun is included.

Uses: field work, pipe welding, general repair and maintenance, chemical and light fabrication industry.

22

500x180x390

300A @30%

5-300

380v 3Ph 50-60 Hz

MLS 3000

8

400x180x390

230A @40%

3-230

380v 3Ph 50-60Hz

MLS 2300 AC/DC

74

690x260x870

350A @60%

3-350

380v 3Ph 50-60 Hz

MLS 3500 AC/DCModel

Dimensions (H x W x D) mm

Weight (Kg)

Rated Output

Output Range

Input Power

If the light and portable Minarc are impressive, wait and see the heavy duty TIG MLS family in action. Although still lighter and smaller than their counterparts in the market, these robust machines deliver great power and superior technology, with the most advanced systems in the industry like MIX TIG, PFC Power control and AC/DC capabilities. User-friendly advanced digital panels allows for easy control of the process.

Don’t wait too long to try a Kemppi...the joy of welding!

Product Catalogue - 2014Strongweld FLUX

Indura 10

INDURFLUX INDURINOX-D3

ALUMFLUX

General use flux for oxyacetylene welding. It keeps its properties along a wide temperature range, to provide effective protection against oxidation. Recommended for tin, copper, cast iron.

Packaging: 1lb and 11lb

Aluminum and aluminum alloy –including cast aluminum- flux. Specially designed to weld all aluminum applications without needing different products. It also works for aluminum brazing.

Packaging: 14oz.

Backup flux for stainless steel and alloy steels. It protects the build-up from oxidation and prevents oxide and cavity forming while helping controlling penetration. A great base for the weld deposit.

Packaging: 1lb

Stripper gel free of chloride for stainless steels. It is used to rebuild SS’s original surface corrosion resistance. The stripping produces better results than sanding, grinding or other surface mechanical treatments.

Packaging: 2lb



SAWSUBMERGED ARC

Product Catalogue - 2014Strongweld SAW Wire

Strongweld EL12 – AWS EL-12

Strongweld EM13K – AWS EM-13K

Strongweld EM12K – AWS EM-12K

Strongweld 400/401/105/207 - FLUXES

Typical Applications: machinable welds requiring maximum

flexibility. Stud fabrication, bridges, railroad cars, tanks,

pressure vessels, propane cylinders, general build up.

Packaging: 60lb coils

Diameters: 5/64, 3/32, 1/8, 5/32

Description: low carbon, low manganese and low silicon solid

wire that provides excellent ductility and cracking resistance.

The thin copper layer in its surface improves the electric

contact between the wire and the tip, thus improving arc

stability and reducing friction. AWS, CWB, ABS, DNV, BV, LR

certified.

Typical Applications: butt or fillet joints on mid carbon and low-

alloy steels. Stud fabrication, bridges, railroad cars, tanks,

pressure vessels.


Diameters: 5/64, 3/32, 1/8, 5/32

Description: solid wire –with half manganese and silicone- that

allows multi pass on steels up to 7/64 thickness. The thin

copper layer in its surface improves the electric contact

between the wire and the tip, thus improving arc stability and

reducing friction. AWS, CWB, ABS, DNV, BV, LR certified.

Typical Applications: fabrication and repairs on structural

grade steels, heavy machinery and equipments.


Diameters: 5/64, 3/32, 1/8, 5/32

Description: silicon solid wire -with balanced silicone and

manganese- that provides excellent ductility and cracking

resistance. The thin copper layer in its surface improves the

electric contact between the wire and the tip, thus improving

arc stability and reducing friction. AWS, CWB, ABS, DNV, BV,

LR certified.

Strongweld 400F7A0 / EM12KStrongweld 401F7A0 / EM12KStrongweld 105F7A2 / EM 12KStrongweld 207F207 / EL 12


WELDING SUPPLIES

MISCELANEOUS

Product Catalogue - 2014Strongweld MISCELANEOUS

PORTABLE CONDITIONER

FLOW REGULATORS

OXYCUT Automatic Equipments

By Koike Aronson

IK-12 BEETLE S-100IK-12 MAX3 S-100IK-12 MAX3 S-200

AIR FILTRATION


PPESAFETY SHOES & BOOTS

by AMERICAN SHOEan INDURA company

Product Catalogue - 2014Strongweld Safety Shoes and Boots

1000 TOP BOOT

3032 NORWEGIAN 3036 ENGINEER

1002 CLASSIC BOOT

- Hydrofuge waterproof leather

- Soft suede linen

- Metallic eyelets

- Thermoformed exchangeable insole

- Reinforced template STEEL TOE

- Electric Hazard, Slip Resistance

- Cushioned calf and socket line

- Hydrocarbon resistant PU sole

- Numbers: 6 1/2 to 11 1/2

- Wild Moroccan leather

- Flannel skin linen

- Plastic eyelets





- Hydrocarbon resistant rubber sole

- Numbers: 6 to 11

- Brown Crazy Horse leather


- Plastic eyelets






- Numbers: 6 to 11

- Greased water resistant leather

- Soft suede linen

- Reinforced toe leather cover

- Natural leather insole





- Numbers: 6 1/2 to 11 1/2


1011 FOUNDRY BOOT

1022 MINER 1020 SHORT BOOT

1012 WELDER BOOT


- Soft suede linen

- Metallic eyelets






- Numbers: 6 1/2 to 11 1/2


- Soft suede linen

- Reinforced toe leather cover






- Numbers: 6 1/2 to 11 1/2


- Soft suede linen

- Leather metatarsal protection






- Numbers: 6 1/2 to 11 1/2


- Soft suede linen

- Quick-remove emergency device






- Numbers: 6 1/2 to 11 1/2


2002 ETERNAL BOOT

2010 CLASSIC WOMAN 2112 MANAGER

2008 NEPTUNE BOOT

- Brown Moroccan leather


- Plastic eyelets






- Numbers: 5 to 9

- Brown Moroccan leather


- Plastic eyelets






- Numbers: 6 to 11


- Soft suede linen

- Extra-resistant toe cover






- Numbers: 6 1/2 to 11 1/2


- Soft suede linen

- Plastic eyelets






- Numbers: 6 1/2 to 11 1/2


2644 AMERICAN WOMAN BOOT

5772 VIP EXECUTIVE 1005 ECONO

3031 EXECUTIVE



- Plastic eyelets






- Numbers: 5 to 9



- Plastic eyelets






- Numbers: 6 to 11

- Wild Moroccan leather


- Plastic eyelets






- Numbers: 6 to 11


- Raw-skin linen

- Plastic eyelets

- Skin insole





- Numbers: 6 to 11


5594 ACONCAGUA THERMIC

1300 AMERICAN CLASSIC 2011 AMERICAN WOMAN

2072 CROSS



- Plastic eyelets






- Numbers: 5 to 9


- Soft suede linen

- Metallic eyelets






- Numbers: 6 1/2 to 11 1/2


- Soft suede linen

- Metallic eyelets





- Hydrocarbon resistant PVC sole

- Numbers: 7 to 11 1/2

- PU/Rubber injection


- 3M Thinsulate

- Exchangeable thermoformed insole

- Reinforced composite TOE



- Reinforced toe skin prevents wear

- Numbers: 6 1/2 to 11 1/2


5720 KOMODO BOOT

5770 TRENDY ENGINEER 5581 DUKE

5710 KOMODO SHOE


- Soft suede linen

- Plastic eyelets






- Numbers: 6 1/2 to 11 1/2

- Duke leather

- Soft suede linen

- Eyelet free






- Numbers: 6 1/2 to 11 1/2

- Black leather

- Soft suede linen

- Plastic eyelets






- Numbers: 5 1/2 to 11 1/2

- Black leather

- Soft suede linen

- Plastic eyelets






- Numbers: 5 1/2 to 11 1/2


5788 DUKE II

5120 RANGER 5720 SEMPER FI

5589 ACID RESISTANT



- 3M Thinsulate




- Fire resistant PU sole


- Numbers: 6 1/2 to 11 1/2



- 3M Thinsulate






- Numbers: 6 1/2 to 11 1/2

- Soft raw-skin linen

- Acid & chemical resistant leather


- PU/Rubber hydrocarbon resistant sole



- Rubber coated leather exterior

- Eyelet free

- Numbers: 6 1/2 to 11 1/2

- Brown Duke leather

- Soft raw-skin linen

- Metallic eyelets






- Numbers: 6 1/2 to 11 1/2


6920 POLICE BOOT

5555 AUSTRAL BOOT 9920 PATAGONIA BOOT

1200 PARK RANGER



- 3M Thinsulate

- Natural sheepskin lining


- non-metallic composite toe



- Extreme weather proof

- Numbers: 7 1/2 to 11



- 3M Thinsulate






- Numbers: 6 1/2 to 11 1/2



- 3M Thinsulate


- Non-metallic composite toe




- Numbers: 6 1/2 to 11 1/2



- 3M Thinsulate






- Numbers: 6 1/2 to 11 1/2


5594 ACONCAGUA BOOT

1101 RELOAD BOOT DAKAR KIFFA

5590 ACONCAGUA SHORT

- Goodyear welt.


- 3M Thinsulate

- EVA heel insert







- 3M Thinsulate






- Numbers: 6 1/2 to 11 1/2



- 3M Thinsulate





- Numbers: 6 1/2 to 11 1/2

- Nobuck leather

- Safety shoe

- Metallic eyelets

- Thermoformed insole




- EVA midsole for better comfort

- Numbers: 6 1/2 to 11 1/2


DAKAR NADOR

DAKAR TWAREK DAKAR SENEGAL

DAKAR KAYES

- Nobuck waterproof leather

- Safety shoe

- Metallic eyelets






- Numbers: 6 1/2 to 11 1/2


- Safety shoe

- Metallic eyelets






- Numbers: 6 1/2 to 11 1/2

- Nobuck leather

- Safety shoe

- Metallic eyelets




- Hydrocarbon resistant sole


- Numbers: 6 1/2 to 11 1/2


- Safety shoe

- Metallic eyelets






- Numbers: 6 1/2 to 11 1/2


DAKAR MOROCCO

DAKAR LISBOA SHOE/BOOT DAKAR PARIS SHOE

DAKAR MALI


- Safety shoe

- Metallic eyelets








- Safety shoe

- Metallic eyelets






- Numbers: 6 1/2 to 11 1/2

- Suede and leather exterior

- Safety shoe

- Metallic eyelets








- Safety shoe

- 3M Thinsulate interior






- Numbers: 6 1/2 to 11 1/2


PPEWELDING HELMETS

INDURA by SPEEDGLASS

Product Catalogue - 2014Strongweld Welding Helmets

Indura PREMIUM WELDER

Indura PREMIUM FLAME

Shade # 3Clear state

44x93 mm (1.73x3.66 in)Visual field

Permanent shade #12UV/IR Protection

Shades 8 to 12Dark state

100ms (fast mode)

200ms (slow mode)Dark to clear time

0.1ms @ 73F (23C)Darkening Speed

1/2/2/3Classification

ANSI Z87.1-2003Norm

NEW! Our Strongweld PREMIUM family of welding masks offers great value

with outstanding protection at affordable prices. Available in two simple,

attractive and professional designs.

Strongweld PREMIUM masks offer protection, comfort and outstanding

performance with exceptional durability. They have custom adjustment for

sensibility and delay as well as weld and grind modes. Low battery sensors

alert the welder when batteries are low. Dark shades from 8 to 12 and clear

shade number 3 allow for most indoor and outdoor uses in a wide variety of

process: SMAW, GMAW and GTAW over 10A.

Product Catalogue - 2014Strongweld Welding Helmets

Indura CLASSIC

Indura VINTAGE ACCESORIES

0.00004 SecondsReaction Time: clear to dark

0.25-0.35 sec (fast mode)

0.60-0.80 sec (slow mode)Dark to clear time

Variable tone, DIN 9 to 13Dark State

DIN 4Clear State

Permanent tone, DIN 16UV/IR Protection

98mmx44mm – 3.8inx1.7inVisual fieldAn affordable auto-darkening

thermoplastic welding helmet with

photo-sensors and auto-tone regulation

from 9 to 13. Protective polycarbonate.

For welding process over 40Amp. Solar

powered batteries. Exceeds DIN EN

379.


PPEPROTECTIVE CLOTHING

by GARMENDIAan INDURA company

Product Catalogue - 2014Strongweld Protective Clothing

WELDING GLOVES AT-19

WELDING GLOVES KC-96 WELDING GLOVES CN-37

WELDER GLOVES RED

- Long glove

- Orange raw-leather with linen

- Great tear resistance

- Side and inter-finger stitch protection

- Denim fist linen

- Kevlar stitches

- Designed for welding work

- Short glove

- Red raw-leather with linen



- Denim fist linen

- Coated polyester stitches


- Orange raw-leather



- Denim fist linen



- Natural raw-leather



- Denim fist linen




SUEDE TIG GLOVES

RAW LEATHER GLOVES REINFORCED RAW LEATHER

LEATHER-CANVAS COMBO

- Suede leather with raw-leather fist

- Great adjustment and flexibility

- Ideal for TIG welding

- Raw leather palm

-Canvas reinforcement in critical areas

- For general service

- 100% reinforced raw-leather

- For general use


- Natural uncolored leather

- Palm reinforced

- Stitch free back of the hand


SHORT COMBO GLOVES

SUEDE GLOVES w/LINING SUEDE GLOVES PLAIN

RANGER COMBO GLOVES



- Palm reinforced

- Stitch free back of the hand


- Combo colored raw-leather

- Leather reinforced palm

- Reinforced inner and outer stitch

- Metal mechanic and construction

- Certified PO goatskin

- Natural lining with elastic fist

- Several colors available

- Ideal for TIG welders

- Driving heavy equipment







SHORT REINFORCED LEATHER

REINFORCED MULTIPURPOUSE

TAN LEATHER w/LINING

RETAIL DISPLAY OPTIONS

- 100% reinforced leather

- Metal mechanic and construction



- Tan colored



- Orange-blue raw-leather



- Denim fist linen, reinforced palm




RAW LEATHER WELDER JACKET

RAW LEATHER WELDER APRON RAW LEATHER WELDER GAITER

RAW LEATHER WELDER PANTS

- 100% cow raw-leather

- Chromium tanned 1.0-1.2mm

- Double reinforced stitches

- Velcro by the front

- Smooth finishing

- Raglan sleeve for better comfort





- Smooth finishing

- Pocket free








LEATHER WELDER JACKET

LEATHER WELDER APRON LEATHER WELDER GAITER

LEATHER WELDER PANTS

- 100% natural leather




- Smooth finishing

- Raglan sleeve for better comfort





- Smooth finishing

- Pocket free







Product Catalogue - 2014Strongweld Safety Glasses

ATACAMA ANTI-FOG

ASPEN POLICARBONATE PATRIOT 3000

ANTARCTIC GRAY

Product Catalogue - 2014Strongweld Safety Glasses

ASTROSPEC 3001

TATIO TORNADO

NEW EDGE ANTIFOG

All our safety glasses are made with high-resistance polycarbonate

providing 99.9% UV protection and excellent peripheral

protection.


INDUSTRIAL SUPPLIESABRASIVES

INDURA by SAINT GOBAIN

Product Catalogue - 2014Strongweld Abrasive Discs

MILD STEEL CUTTING DC/FC

HEAVY DUTY CUTTING WHEEL HIGH QUALITY MILD STEEL CUTTING

STAINLESS STEEL CUTTING DC/FC

7 & 9 in4 ½ in

Flat Center TyeDepressed Center Type

Typical Applications: stainless steel cut-off, general

repairs, piece cut-off during assembly.

Description: stainless steel depressed or flap-type

cut-off wheels. Fast cut. Reduce burr formation and

heat generation during the process. Excellent

durability.

4 ½, 7 & 9 in

Depressed Center

Type

Flat Center Type

Typical Applications: structural steel cutting, general

repairs, piece cut-off during assembly.

4 ½, 7, 9 & 12 in

Description: steel depressed or flap-type cut-off

wheels. Fast cut. Reduce burr formation and heat

generation during the process. Excellent durability.

Diameters: 4 ½, 7 and 9 inches

Typical Applications: carbon steel or stainless steel

plates, profiles, tubes and bars.

Description: heavy-duty depressed center cut-off

wheel. These wheels are made using two grain types:

Seeded Gel (SG) grain ceramic abrasive and

conventional aluminum oxide with a last generation

adhesive, providing high performance and extended

durability that set it apart.

Diameters: 4 ½, 7, 9 & 14 inches

Typical Applications: stainless steel cut-off, high

resistance steel cut-off reducing heat generation,

structural steels.

Description: flap-type steel cut-off wheel of extreme

performance and durability. The patented grain

technology sets it apart from conventional wheels and

boosts its attributes.


HIGH QUALITY SS CUTTING

GRINDING ALL STEEL CUTTING

ALL STEEL HQ Strongweld CUTTING

MILD STEEL GRINDING


Typical Applications: stainless steel plates and

pieces, high resistance steel while reducing heat

generation.

Description: high performance flap cut-off wheel of

fast cut which reduces burr formation and heat

generation. Its exclusive grain formulation enhances

its characteristics and extend its life while minimizing

your operational costs.

Diameters: 4 ½, & 7 inches

Typical Applications: carbon steel, stainless steel and

others. Plates, profiles, bars and tubes. Softer cuts

without burning the piece. Fast cut-off.

Description: high speed flap cut-off wheel. Designed

for high speed and performance. It does not

contaminate stainless steel due to its low chlorine,

sulfur and iron contents. Minimum waste

Diameters: 4 ½, 7 & 9 inches

Typical Applications: carbon steel, stainless steel and

others. Plates, profiles, bars and tubes. Softer cuts

without burning the piece. Fast cut-off.

Description: The original Saint-Gobain high speed

flap cut-off wheel. Designed for high speed and

performance. It does not contaminate stainless steel

due to its low chlorine, sulfur and iron contents.

Minimum waste


Typical Applications: structural steel grinding,

finishing foundry pieces, weld cord grinding, metallic

pieces grinding, high resistance steel grinding.

Description: depressed center grinding wheel. Fast

stock removal. Low heat production. Extended

operating life. Reduce operational costs.


Strongweld HIGH QUALITY GRINDING

HEAVY DUTY DEBURRING WHEEL

STAINLESS STEEL GRINDING

MULTIUSE 1+2+3 Strongweld HQ


Typical Applications: structural steel grinding, foundry

pieces finishing, weld cord grinding, stainless steel

cut-off, high resistance steel cut-off.

Description: high performance depressed center

grinding wheel. Fast stock removal. Low heat

generation. Outstanding operating life.


Typical Applications: structural steel grinding, foundry

piece finishing, weld cord grinding, stainless steel cut-

off, high resistance steel cut-off.

Description: depressed center grinding wheel. Faster

stock removal per hour. Low heat generation.

Extended life.

Diameters: 4 ½ inches

Typical Applications: carbon steel and stainless steel.

90 degrees cut-off, 30 degrees grinding and 15

degrees finishing.

Description: Multi-use depressed center wheel. From

cut-off to finish not needing to change tool or wheel.

Composed of three glass fiber layers that reinforced

the disc for safer operation and improved strength.

All-in-one cut-ff, grinding and sanding. Highly

reinforced.

Diameters: 4 ½ in (40ZA, 50ZA, 60ZA, 80ZA &

120ZA) and 7 in (40 ZA, 60 ZA & 80 ZA)

Typical Applications: stainless steel, aluminum,

ferrous metals, non-ferrous metals, weld cord

grinding, burr elimination (rough edge reduction), rust

removal and cleaning.

Description: Zirconium-aluminum conical grinding

wheel. For grinding, deburring, blending and finishing;

offering long life and consistent high quality finish.


CONTINUOUS DIAMOND WHEEL

SEGMENTED DIAMOND WHEEL

TURBO DIAMOND WHEEL

Diameters: 4 ½ inches

Typical Applications: ceramic tiles, porcelain tiles.

Description: Elastic steel body, crown composed of

high-resistance metallic alloy with diamond particles

in several layers, once a layer is wear, a new one

appears to continue working. More abrasive layers

and more diamond content than conventional discs.

Dry and cold cutting.


Typical Applications: marble, granite, decorative

stones.








Typical Applications: concrete, bricks, roof tiles, dry-

walls, wood.








INDUSTRIAL SUPPLIESPNEUMATIC TOOLS

INDURA by NU AIR (ITALY)

Product Catalogue - 2014Strongweld Pneumatic Tools

PNEUMATIC IMPACT WRENCH KIT

HIGH POWER IMPACT WRENCH

PNEUMATIC RATCHET WRENCH

IMPACT AND RATCHET WRENCH KIT

Transportation case included

Description: ½in pneumatic air impact

wrench, ½ in extension bar, ¼ NPT air

inlet, 5/32 Allen head wrench, pneumatic

oil, 10-piece socket set (9, 10, 11, 13, 14,

17, 19, 22, 24 & 27 mm)

2 HP – 100 Lt

Ideal for low-torque difficult access work.

Description: ½in pneumatic ratchet

wrench, ¼ NPT air inlet.

2 HP – 100 Lt


Description: ½in air impact wrench, ½ in

air ratchet wrench, filter, two ¼ NPT air

inlets, 5/32 Allen head wrench, lubricant

oil, 10-piece socket set (9, 10, 11, 13, 14,

17, 19, 22, 24 & 27 mm)

2 HP – 100 Lt 2 HP – 100 Lt

Designed for heavy-duty applications at

shops.

Description: ½in pneumatic professional

impact wrench, ¼ NPT air inlet.


PNEUMATIC DRILL

STRAIGHT DIE GRINDER KIT

PNEUMATIC NAILER KIT

PNEUMATIC HAMMER KIT

For soft wood and steel

Description: 3/8in pneumatic drill, one

chuck wrench, ¼ NPT air inlet.

3 HP – 100 Lt


Description: air nailer, 5/32 & 3mm Allen

head wrench, safety goggles, pneumatic

oil.

2 HP – 100 Lt


Description: air hammer kit, quick change

retainer, ¼ NPT air inlet, five chisels

17.5cm

2 HP – 100 Lt 2 HP – 100 Lt


Description: ½in air straight die-grinder,

five ¼ stones, 5 1/8 stones, ¼ NPT air

inlet, two manual torques, 1/8 and ¼

spindle collars


PNEUMATIC STRAIGHT CUT-OFF

CONVENTIONAL SPRAY GUN

PNEUMATIC ORBITAL SANDER

PNEUMATIC AIRBRUSH (AEROGRAPH) KIT

For aluminum, plastic fiber, thin

steel, screws and bolts.

Description: 3in pneumatic straight cut-off,

5/32 Allen head wrench, ¼ NPT air inlet.

2 HP – 100 Lt

For automotive, carpentry and

cabinetry works

Description: pneumatic orbital sander, ¼

NPT air inlet.

3 HP – 100 Lt

Automotive and small surface

painting

Description: conventional gravity spray

gun, brushes, ¼ double air outlet, filter,

pin.

3 HP – 100 Lt

Automotive art, tattoos, graphic art.

Description: one airbrush or aerograph,

siphon bottle, siphon cup, air hose, ¼ air

inlet, metal airbrush holder, fluid cup

1.5 HP – 25 Lt


HIGH PRESSURE SPRAY GUN HURACAN AIR TOOL PACKAGE

ACCESORIES

AIR REGULATOR

AIR FILTER AIR FILTER & REGULATOR

AIR REGULATOR FILTER OILER ACCESORIES KIT CONNECTOR KIT

For automotive and large surface

painting.

Description: high pressure air spray gun,

cleaning brush.

1.5 HP – 25 Lt

A complete compressor

painting kit

Product Catalogue - 2014Strongweld Air Compressors

VENTO 1000

HURACAN 2000

VENTO 2000

HURACAN 1520

8 BAR / 116 psiMax Pressure

24 Lt / 6.3 GalTank Capacity

255x580x595Dimensions mm (H x W x D)

14.5Weight (Kg)

1.1Kva / 1.5HPMaximum Power

115 Lt/min

4 CFM

Max Air Flow

120v 1Ph 60Hz

220v 1Ph 50Hz

Input Power




22Weight (Kg)

1.5Kva / 2HPMaximum Power

135 Lt/min

4.75 CFM

Max Air Flow Output

120v 1Ph 60Hz

220v 1Ph 50Hz

Input Power




29Weight (Kg)


135 Lt/min

4.75 CFM

Max Air Flow Output

120v 1Ph 60Hz

220v 1Ph 50Hz

Input Power


100 Lt

26.4 Gal

Tank Capacity


66Weight (Kg)


190 Lt/min6.7 CFM

Max Air Flow Output


Spray gun, air gun, washer gun, 15ft hose and tire inflator included




HURACAN 3000

TIFON 7500

TIFON 4000

TIFON 5500


100 Lt

26.42 Gal

Tank Capacity


69.5Weight (Kg)


240 Lt/min

4 CFM

Max Air Flow


10 BAR145 psi

Max Pressure

200 Lt

52.84 Gal

Tank Capacity


320 Lt/min

11.3 CFM

Max Air Flow


10 BAR

152 psi

Max Pressure

270 Lt

71.3 Gal

Tank Capacity

5.1Kva / 5.5HPMaximum Power

465 Lt/min

16.4 CFM

Max Air Flow


10 BAR152 psi

Max Pressure

270 Lt71.3 Gal

Tank Capacity

7Kva / 7.5HPMaximum Power

602 Lt/min21.5 CFM

Max Air Flow



TIFON 10000

CICLON 15000 & CICLON 20000

CICLON 7500

CICLON 10000

10 BAR152 psi

Max Pressure

500 Lt

132 Gal

Tank Capacity

9.3Kva /10HPMaximum Power

786 Lt/min

27.7 CFM

Max Air Flow


252Kg / 560LbWeight

1460x540x1180Dimensions

5.5Kva / 7.5HP Maximum Power

8 BAR116 psi

Max Pressure

200 Lt52.84 Gal

Tank Capacity

820 Lt/min

28.9 CFM

Max Air Flow


1460x540x1250Dimensions

257Kg / 570LbWeight


10 BAR

145 psi

Max Pressure

300 Lt

79.3 Gal

Tank Capacity

950 Lt/min33.6 CFM

Max Air Flow


1460x630x13001180x630x1430

Dimensions

365Kg / 811Lb438Kg / 973Lb

Weight

11Kva / 15HP15Kva / 20HP

Maximum Power

8-10 BAR116-145 psi

Max Pressure

300-500 Lt79.3-132 Gal

Tank Capacity

1560-2010 Lt/min55.1-70.8 CFM

Max Air Flow



INDUSTRIAL SUPPLIESELECTRIC TOOLS

Strongweld by EINHELL GmbhGerman Engineering

Product Catalogue - 2014Strongweld Electric Tools

HAMMER DRILL T13-650

ANGLE GRINDER A4-600



No Load Speed:

0-3000 RPM

Chuck Size:

½ inch

Weight:

4.2lb

Power :

650W

Cord Length:

10ft

No Load Speed:

0-2700 RPM

Chuck Size:

½ inch

Weight:

5.8lb

Power :

750W

Cord Length:

10ft

No Load Speed:

0-1100/0-3000 RPM

Chuck Size:

½ inch

Weight:

7.9lb

Power :

1050W

Cord Length:

10ft

No Load Speed:

11000 RPM

Disc Diameter:

4½ inch

Weight:

4.4lb

Power :

600W

Cord Length:

10ft

Product Catalogue - 2014Strongweld Electric Tools

ANGLE GRINDER A4-1010 ANGLE GRINDER A7-2300

OUTSTANDING RETAIL PRESENTATION:

No Load Speed:

11000 RPM

Disc Diameter:

4½ inch

Weight:

5.3lb

Power :

1010W

Cord Length:

10ft

No Load Speed:

8000 RPM

Disc Diameter:

7 inch

Weight:

12.5lb

Power :

2300W

Cord Length:

10ft

strongweldstrongweld.net/pdf/catalogue2014.pdf · strongweld product catalogue - 2014mild steel...

Documents