˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · winnc sinumerik 810 d / 840 d...

260
EMCO Maier Ges.m.b.H. P.O. Box 131 A-5400 Hallein-Taxach/Austria Phone ++43-(0)62 45-891-0 Fax ++43-(0)62 45-869 65 Internet: www.emco.at E-Mail: [email protected] EMCO WinNC SINUMERIK 810D/840D Milling Software Description/ Software version from 21.00 Software Description EMCO WinNC SINUMERIK 810D/840D Milling Ref.No. EN 1814 Edition G2007-06 This manual is electronically available (.pdf) upon request at any time on the EMCO homepage.

Upload: votu

Post on 12-May-2018

231 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

����������� � � �

� � ��������

������������������� !�"�#��

� ���$$���%�&'(����)*���

+���$$���%�&'(����)'*�'�

,�#�#-�... ��� �#

������-��/��0��� �#

��

���

�������

��

����

����

���

����

���

��

��

��

��

��

��

�� �� ��

��

���

���

���

��

��

��

������

����

���

��

��

����������

������� ����������� ���

��

��

��

��

��

��

��

��

��

� �

��

��

��

��

����

������� ����������� ���

��

��

��

��

��

��

��

����������� ����������������������

������������ ��!��������������"���������#�$�%��

��������� ������������������������������������ ��!

��"��"�� �����#�����$%��&'�(

���������������� ���� ��������������������������������������������������������������

Page 2: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� �����������

!������������������"������� �����������������#����������������������!$�%&�������!$�%�'������ ���������(�"�(�����

������

���������)������� ������� ����������� ����������������� ����������)���*�+���(�)����"���������������������� ������������������������ ��������������)����*�+��

Page 3: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� �����������

,

�������

���������*�+��-$+.��%$/�012340523��������-���)���� ����������� ��������������� � ������6�7������

����� � ������������ ������� �������������������������������� ������� ���� ������������6��

������������� �����������������6���$88�����+��6���$88�������� �������� ���� �������������6����������������������*�+����������������$88�

�������������������������������������������������������#���������� �����9��������)�����:������������������������������ �������"�������������� �� �������� ���������������� ����������������� �������������������� ������

!����� ��� ����� ����)���� ��� ������� ��� ������ ���� ��� ������� �� ��� �������)�����37%��� ;*��������;� ��+���<������"� ��������"� ��� ������������� �������� � ���������������������

������������������� ��������)������ ���������������� ����������)���-$+.��%$/�012340523�������"���)��������������)����������������������� ����� ����������� ��� ��������� ��������� � ����� ��� ��� ��� � ������ ������ �������������������� ����

$� ��������������������������������������������������������������"������� ��� �������� ���=

�����

������!$�%�'������ �����������(�3����������� �� ���3� �������!7>522�(�����"�!�����

Page 4: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� �����������

5

�������

�����

�������� ���������������� ��������������������������� ������������������ ��������� �� ������������������������������������������������������������������������������� �������������� ��� ����������������������������������������������������������������� ���

����������� ���� �����! �"������������ ������������� �������������� ���� ���� #�������������������� �������� ���

$��%��� ��������������������������������������������������������������������������������� ��&

���� ��� �������� ���������'��!���(�%�����)����*����� ��������������������������������������� +������� �����,"������'��!��� �������������������������������������������� +��

%"!��-������."����� ������������������������������������������������������ +��'���."����� ������������������������������������������������������������������������� +�&�������%�*� �� ����������������������������������������������������������������������� +�/��������������'�� ������������������������������������������������������������ +�0��'��!��� �������������������������������������������������������������������������� +�1

����� ������ ����2�������2�����2�� ���������������������������������������������������������������� ���

�����!� ������" ��������������������������������������������������������������� ���,�*�����������������"� ��� �������������������������������������� ���,�*����������������������� ������������������������������������������� ����������2"� �3�*��"� ���������������������������������������������������������� ����������3����������2"� ����������������������������������������������������� ��&�" ��2������ ������������������������������������������������������������� ��&

�"�*����2������������ �������������������������������������������������������� ��/�2�������������������� �������������������������������������������������������� ��0

�22���������������2��� ����������������������������������������������� ��4$��*�� �� ���� ����"���� ������������������������������������������������ ��4$��*�� �� ���� ������������� ����������������������������������������� ��1�%����� ����������������������������������������������������������������������� ��5�"���������� �������������������������������������������������������������� ��5

�2��������������������� ���������������������������������������������������� ��6$������ �������������������������������������������������������������������������� ��6�����������7�����������2��������8 ������������������������������� ��69�:2������"�����7�6;(��6�8 ������������������������������������� ���;������������ �������������������������������������������������������������������� ���������� �� ��������������������������������������������������������������������� ���&$������������*��)����� �� ��������������������������������������������� ���0

�2������������������ ����������������������������������������������������� ���4������������ ������ ������������������������������������������������� ���1������� �:2������������� ������������������������������������������� ���6�������3������2����� ���������������������������������������������������� ���6������ ��"����� ������������������������������������������������������� ����

�2����������������*��� ����������������������������������������������������� ���&#��������� ������ ����������������������������������������������������������� ���&%��*�� ������ ���������������������������������������������������������������� ���&����-������� ������������������������������������������������������������������ ���/��������� ���������������������������������������������������������������������� ���0�2���������2� ���������������������2!��� ��������������� ���4

�2�������������%���� � ��������������������������������������������������� ���1%� 2������ �� ����*�� �� ����������������������������������������� ���1

�2������������������-"2 ������������������������������������������������������� ���5

�������������� ����"�*�� ���������������������������������������������������������������������������������� %��

<-������� ������������������������������������������������������������������ %���-������� ����������������������������������������������������������������� %�/����� ������������������������������������������������������������������������������ %�0������� ����"� �������������������������������������������������������� %�4������������"����� ��������������������������������������������������������� %�5����"���� ������������������������������������������������������������������������ %�6�� ����*����!�� ����������������������������������������������������������� %��;

9�:�����*����� ������������������������������������������������������������� %���<;(�<��=�����������2������7����� ���8 ������������������������� %���<;(�<��=�����������2������72���8 �������������������������������� %���<�(�<&(��#������"���������2����� ������������������������������� %���</�% �������� ���������������������������������������������������������������� %��4<6(�<4;(�<4;�(�<4;�(�<4;&��>����2 ������� ����������� %��1<4/(�<4/�����"�������� ���������������������������������������� %��5<�1(�<�5(�<�6�9�:����2����� ������� ���������������������� %��5<�0(�<�4��������!��� �:������������������ �������� %��6<�0(�<�4��������!��� 2������ 2������������� ������� %��6<&&��$�������"����� ������������������������������������������������������ %��;<&&�3<&&��$�22���� ���"����2�� �������"�: ������� %��;<4&�$��������22���� ������2�� ��������"�: ������������ %���$������" ���2�� �����</;-</�(�</0; ���������������� %��������� �� �<0&-<01(�<0;;-<066(��?� ������������������� %��/#��������� �� �<1;( ��������������������������������������������������� %��/������������ �� �<1� ������������������������������������������������� %��/���������(�������� �� ���������������������������������������������� %��0<6;��! �"�������� �� ��������������������������������������������� %��0<6��#���������������� �� ���������������������������������������� %��09�:����2�����<�1-<�6 ����������������������������������������������� %��0.��������������<6/(�<60 �������������������������������������� %��4������������ �<��;-<��� ��������������������������������������� %��1�����22������������*����<�/;�-�<&/�(�%#��(�%#��=(.�%�������������������������������������������������������������������������������� %��5

���� ���%��������,���(�'�,$ �������������������������������������� %�&;���������� ����������������������������������������������������������������������������� %�&�%������������� ������������������������������������������������������������������� %�&��@�=�5��%�������(���������� ���������������������������������������� %�&&�@�=�5��%�������(��"����!���� ��������������������������������� %�&&�@�=�5&�%��2������������� ����������������������������������������� %�&0�@�=�5/���������22��� ������������������������������������������������ %�&5�@�=�5/;�$�22���� ������2�� �������"�: ������������� %�/��@�=�50�+������(��@�=�56�+�����0 ����������������������� %�/&�@�=�54�+������ �������������������������������������������������������� %�//�@�=�51�+�����& �������������������������������������������������������� %�/0�@�=�55�+�����/ �������������������������������������������������������� %�/0� �������A�=���(��������������A�=��� ������������� %�/4=������2��������@�=�5;�7B8 ����������������������������������������� %�/6

������������� �������������������������������������������������������������������� %�0��@�=�1��.����������� �������������������������������������������������� %�0��@�=�1�����"��������� ��������������������������������������������� %�0/�@�=��6;�$�������"����� ��������������������������������������������� %�04<������C�=�����(������������ ������������������������������������� %�05=����� ������������=�,<A�=� ������������������������������� %�06��� �������������=�$(�����"���� ����=�$� ����������������� %�4��������"����2�:�����'�$�(����"����2�:�����'�$� �������������������������������������������� %�4/�������"����2�:�������������'�$&(����"����2�:�������������'�$/ ��������������������������������� %�41�������"���� �"�����������@�=�147B8(����"���� �"�����������@�=�117B8 ���������������������������������� %�1�

Page 5: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� �����������

>

�������

.���� �������������������������������������������������������������������������� %�10�������!���)����� ���$��,�(��$��,� ��������������� %�14�������!������������$(����$ ����������������������������� %�11�������!��� ��������������=�(�����=� �������������� %�15�������!�������������#����(���#���� ������������ %�16

�"!2����� ����������������������������������������������������������������������� %�5��"!2�������������������������������������������������������� %�5��"!2���������� ������1 ������������������������������������������� %�5��"!2������,� ���� ����������������������������������������������������� %�5��"!2������ ������D�-�������� � ���������������������������� %�5��"!2����� � ����2� ����2�������� ������������������������ %�5�+�����������2�����(���� ��������������������������������������� %�5�������2��������1(���$ �������������������������������������������� %�5��"!2������ ����2��������2������(� ������������������������ %�5������ "!2���������== ������������������������������������������� %�5&

������E"�2 �������������������������������������������������������������������� %�50?�����������2������E"�2 ���������������������������������������� %�50����������2������E"�2 ������������������������������������������� %�50

������������ ��� (���< ������������������������������������������� %�54�2�������,��&�3��/(��2�����(��2�������$���0(��2�����2 ����������� ���������������������������������������������������������������� %�51���>� �7%�*��������*���8 ������������������������������������������������������� %�56$���@= ������������������������������������������������������������������������������� %�6;.����2����)�����.$�(��.�(��.#, ���������������������������������� %�6��������%� ���2������������ ��������������������������������� %�6&.�������"��2��������� �������������������������������������������������� %�60

������������ ������������� ������� ���$���������� ����������������������������������������������������������������������� ���

$��2��������� ������������������������������������������������������������ ���$�������� ���������������������������������������������������������������������� ����>��2�� ��������������������������������������������������������������������������� ���%������������������������� ������������������������������������������� ��/��F"��������������*��"� ��������������������������� �� ��/��F"��������������*��"� �������"���������������� � ��0

$����� "���� ����������������������������������������������������������������������� ��4

����������!�� ����������� �������������������������������������������������������������������������� .���������������� ������������������������������������������������������������������ .�������������(���������2 ������������������������������������������������� .�&

�� ��� � �����2�������"� ������������������������������������������� .�&����������� ��������������������������������������������������������������������� .�/+��:������� ��������������������������������������������������������������������������� .�0

"�� � #�$� �%�&������������ "�D����!������������������2�������� ��������������������������������������� <�

D����!�����2� ������������������������������������������������������������������� <��� ����*����!�� ���������������������������������������������������������������� <�

D����!������������ ������������������������������������������������������������������� <�? �����������*����!�� ����������������������������������������������������� <�

��������������� ������������������������������������������������������������������������ <&����������> ����������������������������������������������������������������������� <&#�������)������������ ������������������������������������������������������� <&#�������)�������*��"���� � (���$ ���������������������������������������� </#�������)����� ��������������*��"� (������������������������������� </

#��������2��������� ������������������������������������������������������������� <4� ������� ��������������������������������������������������������������������������� <4

� ���������� ������*����!�� ����������������������������������������� <4�����������2������ 3�"����� ���������������������������������������������� <1��2��� �����������2������ ������������������������������������������ <5

���������2����� ���������������������������������������������������������� <6$�2����*�� �� ��������������������������������������������������������������������� <6

=�������� ����� (��$�=�, �������������������������������������������� <�;����� �������� ������������������������������������������������������������������� <������:� ��"��"�� ������������������������������������������������������������������� <��

#.-�=��-�,%#. �������������������������������������������������������������� <������� -��������2(�=�� �������������������������������������� <���"����2(�.�� ������������������������������������������������������������ <���������2� ���������������!������������2(�9A#=�<�&�������2� ��������������������������2(�����$<�&,� �������2�� ����������������������������������������������������������������� <�&�"�������� 2� � ���������������������������������������������������������� <�&�"22����������������� ���������������������������������������������� <�/�"22�� ��"������!��:��� 2���(��%#�=�.(�%#�=�, �� <�0������� ��� "22�� �� ��������������������������������������������������� <�0�+=�.(��+=�, �������������������������������������������������������������� <�0������� ��� "22�� ���2������ 2������ ����������������������� <�0������� ��� "22�� ����������2����� �������������������������� <�0

.���� ���������������������������������������������������������������������������������� <�4����������������*����!�� �������������������������������������������������� <�1

.�����*����!��3�������������� ��2 �������������������������������� <�1�>� ��"�������G,���(�#��G#�(��G ������������������������������������� <�6

Page 6: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� �����������

?

�������

'��������(�)�������� �������������

)*+ ��,���#����!� """""""""""""""""" )�

�*������ + ��,� """"""""""""""""""""""""""""""""" ������������� ��;;;;�-�06666 ������������������������������������������������� #������������ �4;;;;�-�4&;;; �������������������������������������������������� #04

Page 7: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� ������

���

���������

������������������ ��������������� ���

�������������� ����

������������� � ���������������������������������������� �� ������ � ��� ����� ������ ��� ��� � ������� ������ ��������������������������� ������������� �����������

���������� ����

�� ��������� ��� ��� ������� �� ���� � �� ������ ���� ������������������������������������������������� � � �� ��� ��� ��� ���� ��� ��� ��� �������� ���������� !"�!#�� ����� �$ ����� ������ �

��������������������� ����

%�� ������������ �������� ����������������� &"�������������������������������������� ��������������������������������������������� �

�������� ������ ����

%�� ������������ ���������������������� ��� � ���'������ �������������������� � ��� ������$�������� �������������� ��� � ���

������������������ ������������

��

Page 8: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� ������

��(

���������

)����*�'+��������������������������, �������������������������� ����������������������������� ��������� ��� ���������� ��� �� ��� ���� ������ �� ������������ )���� ��� ��������� , �� ������ ����� ��������������������$���������������������������� ����� ���������������

-�����+� ������ ���� ��� ���. ��+������� ��� ���/�������, ����������$�������

)��������������$���������������� ��� 0�����$����������������� ������������������� � ���1234��2356����������� ������, ���������������������� �������������, ������������ �����, ��)�

����� ����� , �� ������ ���� �� �������������� �� � �������������� ��� ����� ��������������������������� �������

����������������� ����������� ��������������������

-�� �����

�������

������������������������������������������������������������� ���������

��������������

���7���� ������������ ������������ ����������������������0����8���� ������������ ���������������������������������0����.���� ��������$ ������������������������.� ��� ������ $����� ��� ������ �� ������ ��� ����$�������������������������� �������� ����0$��������������� ������������ �������� ������

��������������������� ������!��"������"���� ������������� ���������������������������, ������������� ���� ���, ���������������� �����, ���������)�������� ���������� ���� ����� ������� ������������ �������������������������������� �����$�708�����.����������

��������������������#���������!��"������"���� ������������� �������������������������������� � ����������&��� ������������������� ���������������)������� ������� � ��������������������������������1� �����������������6�� ���� ����

��

��

��

��

��

��

��

��

��

��

��

��

��

Page 9: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� ������

��9

�������

�������������������������������:�������� ������������������������� ������������ ��������� �����������0������������������ � ���������

*$ ������������� ��������������������� ��-��� ��������������� ������������� ������������������������������� � ����������&��

-������������������������ ��� �������� ������������������������� �������������� ��

-���������������� � �������������� ���������������������������� ����������������� ����������;

<� �2�5�178����������$6�������:����������������� ������� ���� :=�: ���.��� ��������������� ����������&�!: ���� � �����

<� �������� �����$������0�=�����������$ ���������������$�������-������������������� ���������������2�5������� ��������� ��������

��

Page 10: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� ������

��4

Page 11: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ����������� ����������� �

���

����������� ����

����������� ����������������� �

��

���

�������

��

����

����

��� ���

��

��

��

��

��

��

�� �� ��

��

���

���

���

��

��

��

������

����

���

��

��

����������

������� ����������� ���

��

���

��

��

��

��

��

��

��

� �

��

��

��

��

����

������� ����������� ���

��

��

��

��

��

��

��

����

Page 12: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ����������� ����������� �

���

������� ������������� ��

�������� ���������� ����� ���� ��� ���������� ���������������������������������������������� ����

��������

� ������� !�"�

� � #����

��������� ����� ���

����$����%�"����������!��� ����"������������ ����������!��� ��� ����&� ��"� ���� �����!��� ����� ���� �"�� ����������

����$����%�"����������!��� ����"������������� ����������!������������������� ��

'���$����%�"����������!��� ����"�������"�� �����������!����� ����&� ��"� ���� �����!��� ����� ���� ������ ����������

(���$����)���������������"�'��������������

��������������� ���������

��

��

��

��

��

�� �

��

��

��

� �

�� !

"#$%

&'

()

*+

,-

./0

1

2

3

4

5 6

7

8

9���

:

;5

<�

Page 13: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ����������� ����������� �

��'

������������ )"����*�����������+��"�����,"���-�����

.������� �����������"�"�������"������

� ���������������� ���������������������

$��!�������������������+��"�����,"���

/���"���������*������� ���������"�0�������

� #���"�����"�

�� $��!����"��������"���������������"����������1�!�" ������!���

������������������!����2�2�

�$������!���!��!�����0�"���!���!��"����������"����

3�����"��������"��0������"�������������!���!������

�� � #�"�"���!��4���

� � � #�"�"������4�"���

� ��

������� !�"��4���"!�"�

� ����

#���"����� �����

� $�������� ���4�������� ��

5 $������������"�������������0�����������������������&!�����"����" ���!�����������

5 ,��0����4�����0����!��������4�"�����������6����0�

�6��������0�

���� ���4�7���

5 $!�������������������������������������5 7��������������"���������������������������������0���������

!������ �������������"����������"���0���������"����������������0�����

���.�����������������������

/����� ��

5 �� ���0�"����������0����5 +����4�������"����"�5 +�������

$���� ��

Page 14: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ����������� ����������� �

��(

�������������

� )���������������0��+��"�����,"��

� )���������������0���������

' +��"���������&�!�����������������0�&������!��������������������8�%&�/9#�

( :"��"���������������������������������"��"��

; #�����������

< #����������"����������

= :"��"�������

> #�������������������$3/:&�)8?&�$� &�����

@ ,��"���������������

�A B�" ���!���!&�9#����������!�" ���!���!���"��"�������"������9#������ �����&� ������ �0������� �� ���� ���0�+��"�����,"����"������������"��

�� ������������!���!����" ���!�������"��"��������������������������0�"�������� �����"��������"��������0����"��

�� C�"�������� �������>��������!�������������������� ��"������������������:#��$��� %���%>�

����

���

���

�� �

� ���

������ ��������� ������� ������ ������� ������

������� ����������

�����������

��

�������������

��������

���

������� �������

� �� ���! "" #�###

$ ����� # "" #�###

% ���� �& "" #�###

#�### �' #�###

()�� #�### *+"��

�� #�### *+"��

�� #�### �'

�##�### ,

��-���.,/

���'��� ""+"��

�� #�### �##�###����,

��� #�###

0���

0� ��

0� ��

�����)��'�����1

�# �!�

����"��2����

��

��

��

��

��

��

��

�� �� �� �� �� �� �� �

��

�� ��

����

��

��

����

�� ��

��

���������� ������������������� �

�����3��'�� �

����

���

�' B���������������������&����� ���

���0���*������� �������"�"��������������

�( )�����������!������"���"�����

�; B���������������������&����� ���� � �

���0������"�������0��������

�< D�"E��������� �������>��������!�������������������� ������!����������:#��%���%>�

�= B���������������������&����� ��� � �

���0�����"����� ������������0����������������

Page 15: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

WinnC SinUMERiK 810 D / 840 D Milling KEy DESCRiption

B 5

PC K

eybo

ard

The

mac

hine

fun

ctio

ns in

the

nu

mer

ic k

ey b

lock

are

act

ive

only

with

inac

tive

NU

M lo

ck

Bol

d lin

ed k

eys

are

spec

ial f

unct

ions

for c

ontro

l and

mac

hine

, to

act

ivat

e ha

tche

d ke

y fu

nctio

ns p

ress

the

ALT

or C

TRL

key

at th

e sa

me

time.

Pre

ssin

g F1

0 sh

ows

the

Ope

ratin

g A

reas

(Mac

hine

, Par

amet

er, .

..) in

the

horiz

onta

l sof

tkey

line

.P

ress

ing

Shi

ft F1

0 sh

ows

the

oper

atin

g m

odes

(AU

TOM

ATIC

, JO

G, .

..) in

the

verti

cal s

oftk

ey li

ne.

Pre

ssin

g E

SC

con

firm

s so

me

alar

ms.

The

mea

ning

of t

he k

ey c

ombi

natio

n C

TRL

2 de

pend

s on

the

mac

hine

:M

ILL

50/5

5:

Puf

f blo

win

g O

N/O

FFM

ILL

100/

125/

155:

C

oola

nt O

N/O

FFTh

e as

sign

emen

t of t

he a

cces

sory

func

tions

is d

escr

ibed

in th

e ch

apte

r "A

cces

sory

Fun

ctio

ns"

Alt

Gr

DE

LETE

EN

DE

Num

Fest

Rol

len

Dru

ckR

olle

nP

ause

Num

NC

-S

TAR

T

RE

SE

TN

C-

STO

P

-4+Y

-Y+4

RE

FA

LL-X

+X

+Z -ZDR

YR

UN

SK

IP

OPT

STO

PS

BL

<% >%

F3F4

F5F6

F7F8

F12

>

QW

ER

TZ

UI

OP

Ü* +

~

AS

DF

GH

JK

Ä' #

YX

CV

BN

M; ,

:.

- _> <

Strg

Strg

Alt

Alt

Gr

° ^1!

23

45

67

89

"$

%&

/(

)?

]´`

=

JOG

MD

AA

UTO

RE

PO

SR

EF

F1F2

>

M [

F11

@

INC

100

0IN

C 1

0000

INC

10

INC

100

= 4

= $

==

INC

1 0

004$

4$S

trg4$

4$A

ltINC

1

Page 16: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

WinnC SinUMERiK 810 D / 840 D Milling KEy DESCRiption

B 6

Machine control panel

Depending on machine configuration, the control panel can differ slightly from what is shown here.

Key Description

Dryrun (test-run feed)In Dry-run mode, positioning movements will be carried out with the dry-run feed.The dry-run feed works instead of the programmed movement commands.On starting the NC program, the main spindle will not be activated and the slides will move with dry-run feed speed.Only perform the test run without a workpiece to avoid the danger of collisions.If the test run is engaged, the test "DRY" appears in the simulation window.

Skip (block mask)In Skip mode, program blocks will be jumped over when the program is running.

COOLANT-PISTOLOFF

ON

0

1

01

8642

1020

60 704080

90

100

110

120

3050 75

85

95

105

115

Instructions:The buttons for the Con-cept Mill 250 machine are explained below. For other machines take note of Chapter D EMCO-spe-cific Programming and Operation in the operating manual.

0

6

2

10

7080

90

100

110

120

3050

Machine control panel variant with Easy2Control and MOC-Touch

Page 17: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

WinnC SinUMERiK 810 D / 840 D Milling KEy DESCRiption

B 7

Single blockThis functions allows you to execute a program block by block.The Single Block function can be activated in the automatic mode (a program will be executed automatically) operation type.

When single block processing is active:• SBL" (=SingleBlock) is shown on the screen.• the current block of the part program is only processed when you press

the NC Start button.• processing stops after a block is executed.• the following block is executed by pressing the NC Start key again.The function can be deselected by pressing the Single Block key again.

Reset key (Reset)• A running program or a movement will be broken off.• Alarm notifications will be cleared.• The control system is in the starting position and ready for a new pro-

gram sequence.

NC StopAfter pressing the NC Stop button the execution of the running program will be broken off.Processing can then be continued by pressing the NC Start button.

NC StartAfter pressing the NC Start button the selected program will be started with the current block.

Optional stopWhen this function is active, program processing will always stop at blocks in which the M01 special function has been programmed.You start processing again with the NC Start button. If the function is not active, the M01 special function will be ignored.

Individual piece modeThis button makes individual piece mode or constant operation in con-junction with automatic loading equipment available for selection.Individual state is the default state when switched on.

Page 18: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

WinnC SinUMERiK 810 D / 840 D Milling KEy DESCRiption

B 8

Arrow keysWith these buttons, the NC axes can be moved in JOG operation mode.

Reference pointPressing this button causes the reference points to be approached in all axes.

Rapid TraverseIf this function is pressed in addition to the direction buttons, the axes concerned move in rapid traverse.

Feed StopIn "AUTOMATIC" operation mode, this function cancels a slide movement.

Feed StartThis function resumes a programmed slide movement which has been interrupted.If the main spindle motion was also broken off, it must be switched on first.

Spindle speed correctionThe set spindle speed value S will be shown on the screen as an absolute value and as a percentage.Effective for the milling spindle.

Adjustment range: 50 - 120% of the programmed spindle speedIncrement: 5% per button press100% spindle speed: 100% button

Spindle StopThis button interrupts the motion of the milling spindle. If it happens during a feed movement, that has to be stopped first.

Spindle StartThis function resumes the programmed spindle motion.

Page 19: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

WinnC SinUMERiK 810 D / 840 D Milling KEy DESCRiption

B 9

Swing tool drumPressing this button causes the tool drum to swivel by one position:

Cycle in the clockwise direction (one position further)

Cycle in the counter-clockwise direction (one position back)

Preconditions:• Machine doors closed• "JOG" operating mode• Key switch in "Hand" position

Manual tool changePressing this button starts a manual tool change.The tool clamped in the milling spindle will be removed and replaced with the tool from the currently swivelled-in tool drum.

Preconditions:• Machine doors closed• "JOG" operating mode• Key switch in "Hand" position

Note:• Interrupt the change process by moving the override switch below

4%.• Cancellation of the change procedure by pressing the reset button.

Chip conveyor (Option)Switch on chip conveyor:Forwards: Press button for less than 1 second.Backwards: Press button for longer than 1 second.

The chip conveyor will be switched off after a defined time (approx. 35 seconds).This value is set in the factory.

Clamping deviceThese functions activate the clamping device.

Automatic machine doorsTo open and close the machine doors.

Page 20: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

WinnC SinUMERiK 810 D / 840 D Milling KEy DESCRiption

B 10

CoolantThis function switches the coolant equipment on or off.

Auxiliary OFFThis function switches off the machine's auxiliary unit. Only effective if spindle and program are off.

Auxiliary ONThis function makes the machine's auxiliary unit ready for operation (e.g.: hydraulics, feed drives, spindle drives, lubrication, chip conveyors, coolant).The button must be pressed for around 1 second.Briefly pressing the AUX ON button is a quit function and causes the central lubrication system to perform a lubrication impulse.

REF - Reference modeApproaching the reference point (Ref) in the JOG operating mode.

AUTO - Automatic modeControl the machine by automatically executing programs.Here part programs are selected, started, adjusted, deliberately influenced (e.g. individual block) and executed.

EDITno function

MDA - Semi-automatic modeControl the machine by executing a set or a sequence of sets. Block input is performed via the operating panel.

JOG - JoggingStandard movement of the machine by continuous movement of the axes via the directional buttons or by incremental movement of the axes via the directional buttons or the handwheel.JOG is used in manual mode as well as for set-up of the machine.

TEACH INno function

Types of operation

Page 21: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

WinnC SinUMERiK 810 D / 840 D Milling KEy DESCRiption

B 11

Instructions:• The operating modes can be selected via softkeys (PC keyboard)

or with the operating mode selector switch.• Switching between the metrical measurement system and the

imperial (inch-based) measurement system is carried out with the EmConfig utility software (see Chapter X EmConfig).

Inc 1 - Incremental FeedMove step by step a predefined distance of 1 increment.Metrical measurement system: Inc 1 corresponds to 1µmImperial (inch-based) measurement system: Inc 1 corresponds to 0,1 µinch

Inc 10 - Incremental FeedMove step by step a predefined distance of 10 increments.Metrical measurement system: Inc 10 corresponds to 10µmImperial (inch-based) measurement system: Inc 10 corresponds to 1 µinch

Inc 100 - Incremental FeedMove step by step a predefined distance of 100 increments.Metrical measurement system: Inc 100 corresponds to 100µmImperial (inch-based) measurement system: Inc 100 corresponds to 10 µinchh

Inc 1000 - Incremental FeedMove step by step a predefined distance of 1000 increments.Metrical measurement system: Inc 1000 corresponds to 1000µmImperial (inch-based) measurement system: Inc 1000 corresponds to 100 µinch

Inc 10000 - Incremental FeedMove step by step a predefined distance of 10000 increments.Metrical measurement system: Inc 10000 corresponds to 10000µmImperial (inch-based) measurement system: Inc 10000 corresponds to 1000 µinch

REPOS - RepositioningBack-positioning, approach contour again in the JOG operating mode

Note:The allocation from metric to the imperial system is as follows:

feed:millimeter to inch:mm/min => inch/minmm/U => inch/U

constant cutting speed:meter to feet:m/min => feet/min

Page 22: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

WinnC SinUMERiK 810 D / 840 D Milling KEy DESCRiption

B 12

Override switch (feed rate override)The rotary switch with notch positions enables you to change the pro-grammed feed value F (corresponds to 100%).The set feed value F in % will be shown on the screen.

Adjustment range:0% to 120% of the programmed feed.In rapid traverse 100% will not be exceeded.

No effect with thread commands G33, G63

01

8642

1020

60 704080

90

100

110

120

3050 75

85

95

105

115

EMERGENCY STOPPress the red button in emergency situations only.

Effects:As a rule, the EMERGENCY STOP button will lead to all drives being stopped with the greatest possible braking torque.

Unlock: Twist button

To continue working, press the following buttons:RESET, AUX ON, doors OPEN and CLOSED.

Key Switch Special Operations ModeThe key switch can be set to "AUTOMATIC" or "READY" (hand) mode.With this key switch it is possible to perform movements in Jog Mode when the sliding door is open.

Danger:When Special Operations mode is active, the danger of accidents is increased.The key for this switch should only be held by persons who have the required knowledge about the dangers and exercise appropriate care.Keep the chip guard door closed even in Set-up mode.Keys should only be used by authorised persons.After work is carried out in Special Operations mode, always withdraw key (accident danger).Observe country-specific safety instructions (e.g.: SUVA, BG, UVV ....).

Page 23: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

WinnC SinUMERiK 810 D / 840 D Milling KEy DESCRiption

B 13

1 Spindle override: controls the spindle speed equiv-alent to conventional spindle override

2 Feed override: controls the feed rate equivalent to conventional feed override

3 Modes: allows you to select the operating mode using the multifunction operation

4 Close: The user interface is closed. The menu disappears, return to the control surface

5 Settings: opens another level with settings

6 Cursor: shows the actual position in the menu

Multifunction switch for operating modesThe multi-function switch is designed as a rotary switch with a press feature.

Populated function• The user interface is opened by pressing the multifunction operation.

The active function is indicated by a green check-box. • Turning the switch allows you to switch between the functions. The

black bar with the symbols moves to the left or to the right.• Activating a function or a change to a sub-menu is executed by pressing

the button.

The interface offers the following functions:

turn

/ pr

ess

Overwiew

Note:The functionality of the multifunction operation is depending on the installed software version.

1 3245

6

Page 24: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

WinnC SinUMERiK 810 D / 840 D Milling KEy DESCRiption

B 14

1

Lock screen

1 Lock screen: pressing again unlocks the screen and closes the unser interface.

Page 25: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

WinnC SinUMERiK 810 D / 840 D Milling KEy DESCRiption

B 15

Handwheel function

The handwheel (1) activates the handwheel mode. The parameters for axis and step width (2) are set with the axis- and operating -mode buttons on the machine keyboard.

Operation

• Theelectronichandwheelisusedtotraversetheslidesatadefinedstep width.

• The step width depends on the selected Inc mode: Inc 1, Inc 10, Inc 100.

• Theremustbeonepre-selectedIncmodeandanaxisdefinedbyadirection key.

• Also refer to "types of operation" und "arrow keys" in chapter B.

Note:In the mode "Inc 1000" the slides cannot be moved with the hand-wheel. "Inc 1000" operates with "Inc 100".

2

1

Page 26: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

WinnC SinUMERiK 810 D / 840 D Milling KEy DESCRiption

B 16

USB connection (USB 2.0)Data is exchanged with the machine (data copying, software installation) via this USB connection.

Key switchThe function of the key switch is machinespecific

0

1

Enable buttonWhen the door is open, axis movements via direction buttons and tool changer movements are authorized by pressing the enable button (pre-condition: key switch in SET-UP position).In machines with automated doors (option) pressing the enable switch opens the machine doors.

Additional NC start buttonThe additional button has the same function as on the machine control panel.(Double movement because of better operation).

Page 27: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

���

����������

����������������

���� ������ � ��� ���� ���������� ���������� ���� ������ � �!� "�#���$%&&���'���� ��(��)* �%�� �* +!���* +��!* ��,�%��* ��� ����* ���$��

��������-������ �����������&.���� �����/��%!� "�� ���������� �&�����0�.�&� �1

�������������

+��������0�.� ��������&.�����/��%�!� "�2�������

��-������ ������ ���������� �&�����0�.�&� �13�!� .�!� "�����/��%�!� "�% �/��%&&���2��������0�.14.������ ���� ������0�.�.�"�2�&&����/%0���������,��"��!� "1

�������������������������

* �� ���!� "�2� ��25���������0�.�.�"�% �%� �������%��,��2� ��26���� %��,�� 2� ��2� ���!0��� 2���� � %�&�"��/���71� �"���% �/���� ��� �����%��,��2� ��2�� &.1

* �%�&&� ��� �����!� "�2� ��2�%�&&��������2����/%01

* +&%��%"���� �����!� "�2� ��21

��

� �

� �

Page 28: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

��8

�������������������������

* ��&�%����&�������%��.

* '�� ���%&�������%��.'�� ���%&������&�%�������%��.1

* '�� ���&�'�� � ��&�� 2�� � ��� ���"&�� /�� ��%������ � � ��������11

�������������������

* ���� ���� 0�.� � � ��� %��,��� �� ���%��,��

���/"��� �����2��%�/�-��1�9�%��,�

�9� ���%��,�

* � �"�����&��

�� ���� ���� �"��!���1

� ����,&"���� ��!�6�1�1� ��&�� !�7�2���� ���&�� "!��%�0�./��1

:�"�"��!��%&&.�� �������� �"��!���#�2�� ����%"���2���&%���� ������ �"�����&����,��"�&.1

(%0 �2&�����.�"�� �"��2��������0�.�;� �"�;1����,&"��2�&&�/���0� ��,�1

��������0�.�� ��������&��/��2�� ������� ��

,&"���6�1�1���2�$/%02�71

� �

Page 29: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

��<

��������������������

* �� ��!�� �"��,��� �"��� ��&�,��%�"&�!� "�2� ��2�6��" ���%&&� ��!� "71

* � %�&�� �"���=�%�� � �"��� �� &�,�� %�"&� !� "� 2� ��26��" ����%&&� ��!� "71

��=�%�� � �"��� �� &�,�� %�"&� !� "� 2� ��26��" � "��!��%&&.� ��� ���� �-�� ������ !� "&�,�&71

��=�%��� �"��� ����.�� �%�"&�!� "�2� ��21

'�

�(���>

�������������

* �-��&�%0�!� �)(%��,���!� "�2� ��2+"��%"���� ��������� �"�����&���&�%�����%��.+��������0�.(%��,��������%��,�������/"��� ����2��%�/�-(%��,���� �"�����&�'�� ���&�%��� �&��

* 8-��&�%0�6��"/&��%&�%07�!� �)>������&�%��� �0���,��,&"����� �"�'�� ����%��.

* ������!�"���0�.�!� �

����2������ ����

Page 30: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

���

������������������

���� �" %��� &��������� ����%� ��&����� ����� � ����� ����1

������������ ��� ��������� �����

�� ������������������������������������������� ����

��������������������������������������������������

������ ��������������������������������� �� ������ �����������������

!������������������"����� �������"

�����#$���%��������&������������ �����"�����������

Page 31: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

��?

������������������

����'���� ��(����%�� ��%�,���&&��" %��� � ��� �&"� %��#�����&������%��� ��������!%�� ����&�������%����������1

����������� �!����)

* @'A�

@������"�������! "&������� � �����$"��������!%�� �1���$"���" %��� �))

(���%������ %����� ��6���7�

��������� � ��6�����7��

� %�!� ���,����� � �� ��� ���

* ��(�

�&�$"��!��%������� +�� ���!�� % �/�� %����� ��2�0������/&�%0$/.$/&�%01

* (��'�(�����

3"&&.�"��!��%������� 5�0� ������������!�1+�����!��2�&&�/����&�%���#������#�%��%���#� �� ��� &&.� � �&"� %��� 6�1�1� �� �&�� /&�%07� �2�0������1

����������� ��!�����% �/����&�%����/.�����0�.6+��0�./��7���2������������� ��!������&�%���2��%�1

Page 32: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

��

��������������������

����!%�� ��-���% �/���,�����! "&&.�2����������%��� �0�.�1

* �� ������@'A�!����6 ���(&�B3��������+�71

* ���� 0�.�� �� # �� # �� # �� # �� # �� #� ��%1

!�,������-���� ���������������%��� ���&� �������0�.����������1

* 3����2�&&�/������2���������,������2��%�1

* 5�� �����0�.� �������������!"&� "�"�&.#����

-���!�,��2�������������1

��������������������

4.����%�� ���������� %����� ������%� ��&�2�&&�/��. %�� ������������!%�� �1

* ��&�%����3�!����6 ���(&�B3��������+�71

* +�����������%��� �0�.� �� ��� �� �������%�

�������� %����� ��� ������-��#��!�����&&�����-��1

* 5��������0�.����

��� �&&�-���2�&&�/�����%���

"��!��%&&.�6+��0�./��71

� ������%�&&���� �

�� �� ��� �/��%&��� � � ����2�0� �� �� 6%&!�� ���,�%��#�%&!����2�0���%�����%171

(�����%�� ���������� %����� ������������� �2�&&�/�����&.��� �� %�"&� ������� 1� ��2� ���� %� ��&� ���. %�� ������������!%�� �1

�� �� ��

��

���

���

���

��

��

��

Page 33: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

��C

�����������������������

5�����������%��� �0�.��.�"�% ��,���������&������ � %�!� ��1����� �������!! ���0�.����������� ������!! ���0�.������������ �����!! ���0�.������������� ��!! ���0�.���������D(� ,�/&�������!��"�

* �� ��� � ��� ����!���� 6 ������ ��� � � ��(&�B�� 111

(&�B��������+�716(&� �11���9�#�(&� �11���9��#�(&� 811���9���#�1117

* ���� 0�.�� �� # �� # �� # �� # �� # �� #� ��%1

!�,�� ����-��� � � ���� ����������%��� � ��� ����������� %�!� �1

* 3����2�&&�/������2���������,������2��%�1

* 5�� �����0�.� �������������!"&� "�"�&.#����

-���!�,��2�������������1

�� �� ��

��

���

���

���

��

��

��

Page 34: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

���

������

� � � ������(�!���� 6� "&����("��!��%7� �����!��% �/��%����� �� �/&�%0$/.$/&�%01�������� � ��� ���� ������� !�,�!� ��� ,�� ���0�./��� �� �� �&�� ��� ���!� /&�%0�� � ��� ���%� ��&1

����%� ��&�2�0����������/&�%0����������� �����

0�.� 1

3�����(����!�" ������!����%� ����� ���,&�������� �"��!��%����!�" 1

�����������

� �����("��!��%�!����������!��% �" ��"&&."��!��%1

+�%� ����� �����2�0� ������������!�)* �������� %����� ��2�����%���* ����������!����&������ �������%� ��&1* ���� �%���.� %��%��� � ,&"��� �,�� /��

%��%0��� �� � ����� 6�1�1� ���� �������#� ���&%��%��� �7

* ��������.�&�%0����%��,��6�1�1�%�����"�����%&����71

+����/�&������� �"��!��%�!���)* +��!�%��%��� * 4&�%0���%�* ',�����* +��!�� �&"� %�

����%�����3�$�+��!��" 1

Page 35: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

��E

���������������������

� �����'���� ��(��+!����.�"�% �� ��� ���������������!� �����&�%��%��� 1

���������

����%�������$����&����"� �������&�(�!� ������ 1

�� ������!���������������"

��+!������,�/&���2��%��% �/��"�����%&%"&��� ��!����2���� ����!�1������ �!���� % � /�� ������� ! "&&.� � � ��������� �� ��1

+������������0�.���+(�(�����1:�"�% �����"�� ����2 �� ��������!����&���

"�� ������0�.�� � � ���

1

�� ����!���)+������ �����%"���� �������������� �"����&��� �� ������� �2�,&"�1

��&�����!���)5������������0�.���>����(��(�.�"�% ���&����&&�!������ ����� ����11�����11�1���� ����0�.� ��>���� (>>� ��&����� ���� � ���� ��!���� ��15������������0�.��(4'��� ��'��.�"�% �/����%� ��!���&��� �1

3� ���!���)+������������0�.���(��F� ��� ������� "!/���������!�������/����" �1

5�� �.�"������ �����%"���2�&&�/���&%���� ����

���%�������!�����������-����1

���$!���

��%�

��&����

'�

��&����&&

(/��

Page 36: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

����

�����%�!�"���� �,�/&���69����!���7���������(>� �.�����,�&/&������� ���" ��� �����������2��������%� ��&��� "!��0������1���� �����������E��������������������&�������"��#��E������EE�������,���������'1

#��$�����������!�%&'��%("

(%�"&�2�0���%�� "!/�����%�"&� �2�0���%�� "!/�� ��� � ��%����" ���!�����E�1

��!� &�2�0���%�� "!/����� �!� &�2�0���%�� "!/������ ��%����" ���!�����E�1

3" %��� * ��� ���� 2�0���%�� "!/�� ��� � ����� � � �E�#�!�����E�� %�" ��� ��!� ���� ������ �!� &2�0���%�� "!/����2 2������15�� �����������2�0���%�� "!/�����2�0������#����!������;��!� &�2�0���%�� "!/���%���;�������&.��1

* ��� ���� 2�0���%�� "!/�� �E�� �� ���� %�"&2�0���%�� "!/���E�������������#��!�����E�%�" �����!���"�2�1

+��!!� �����%&&$"���������2�0���%��%�" ���� ��������!��� %���� �"�� ="��� /����� �����<�� %�!! ��2���)*&& (1

�-!�&�8?��2�0���%�����! "�%�"��1

* ��!� &�2�0���%�� "!/���E��9�8?��������� 2�0���%�� %�" ��� %�" ��� ��!� � 8?�� ��� ���2 2�� ����� ��!��������!�������;��!� &2�0���%�� "!/���%���;1

* ��!� &�2�0���%�� "!/���E��9������(%�"&�2�0���%�� "!/���E��9����������2�0���%��%�" ���%�" �����!������8?�� ������ ����!����!�����1

Page 37: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

����

+����������

* 5�0� ����&�!�����

5��������2�0� ����&�!����� �.�"�% �����&�!����� 2��%���������&�% �/��!�,��1

+&%������%"���� ������������� �"�����&�� ��� ������ �2�,&"�1

(%��,���.�"�� �"��2��������0�.�� 1

����)� ���(� ��("��!��%�!����#�2���� � �������!����2�0� ���� &�!����� � ���%��,��� &.����� ���5(>��'��%�!! �1

* @'A���

@'A�������3���� ��� ���� -��� ��� ! "&� �,��� � � � @'A������ 1

� ������� �2�,&"�

* ��� �&����

�-1���!� )>�!����� ����������� �&�������1���������!������� &.2���� �����!-�!"!� ��!� �!"!�,&"������������ ���� �����!%�� ����

��� �&��������&�!����� ���AE )+��!!/&��"������� �&��������&�!���6AE 7���%� �� ��%"��� �������1

A�)� ��� ���� ��&�%���� ��� ����� ��� !%�� ��� 2���!�%� �%&���14.����������������������!� ���� �&��% �/��!� �����%��%�&.1

+&%������%"���� ������ �"�����&�� ��� ������� �2

,&"������&�%������,&"��2��������0�.�� 1

@'A��

5�01��&�!�����

��� �&���

Page 38: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

���8

* �.�" �������

����� ������� ���"���� � ���:����� � �������� ������!!���������1

* ���� �� �&����������%"��� �

3�������%"��� �#������ ��������� ����������� �&��������&.���������� ���&� �&�1�(�!"&���&�������% /��%"��/.�%� �� ������ �&��2�� ����������%"������� ����������1

3�������:

���� � �&�

Page 39: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

���<

,��������

* �� �������/&�������������6A?��$�A?C7)

�����������)' �!����!%�� �����&�#������,&"�������%"����� ��" "��������%� ����2�����0�.��2��%�1

3� ��������)���"��������� ��%��%��� ���������%�����������6�1�12��%��%��� 7� ����� �����%"����� ���%� ���1����� �"��,&"������� ������������&�!��������G � !!1

��������%��,������/&�����������������������&��"!����� �� ��%����������1

������ #��%&�#�!��)����!� ��� �&�0�����!!� �����;3!��;1����$��� �% �� &.�/�������" �����!��.�-��1����%�������$�+��!!� ��$������ ���#�H���������1

��&�%�� ����������������������A?��$�A?C�2�����������0�.��5'$� ��5'B1��&�%������%��,�������������6� ���(���("��!��%72������������0�.���>������5'1

��������0�.�(���+��+'����'���������&.���� &.��� �-���������� � ���� ����� � � ���� � �"�� ���&�1������������ ����� �������������%� ��&�2�� �.�"�����(���+��+'����'�1

� �������,&"���� �������� �"�����&������&�%��� �2

,&"��2��������0�.�� �6!��71

�(D��2�&&��,������ �2�,&"��#���@�������������&�����,&"�������������� &�,&"��1

5'$5'B

��&�%���5'

(%%����������

�,���=�%�

Page 40: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

����

* ���"������/&�������������6A?��$�A?C7�6��"%�7)

��&�%�� ����������������������A?��$�A?C�2�����������0�.��H'$� ��H'B1��&�%������%��,�������������6� ���(���("��!��%72������������0�.���>������H'1

:�"�!"���/��� �@'A�!���1

+������������0�.�����������H'1

� �������%����� �� �����&�������.�"���"%�� ����&)�$��1 ���&�$��1 %��%��� �6����7

��������0�.�� ������&�%�)

$ �����&�, ��&� �����!����6�#�8#�<7 �����%��� �6B#�$#�2����"�7

$ � %&"��� � �����%��� ������"��6B#�$#�2����"�7$ � %&"��� � �����%��� ��������&.����� /&��������6B#�$#�2����"�7

�� ��!�������"%�� �����&�2����'�1

+&%������%"���� �����%����� �� ��� �"�����&���������������6�1�1�H�%���71��"%�� � � ���� %����� �� �� ������� � ��� ���� ����������6�1�1�%&!�� ����,�%��������� �� �H7� ��������������0�.�'�1����������� �2�&&�/���0� ��,�1

��"%��� �&&��������������� �������������������1

�(D��2�&&��,������ �2�,&"��#���@�������������&�����,&"�������������� &�,&"��1

����!� �H'

'�

'�

H'$H'B

��&�%���H'

�,���=�%�

Page 41: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

���?

* �� ���/�������������)

����/�����������������������������2��%�����&2.�%��,��62����"�����%�&�%&&$"�71����/�����������������"��������1�1���%���/&���� !�&&� ��!%�� ������ ��!�������& ����� �&����1

�����������)' �!����!%�� �����&�#������,&"�������%"����� ��" "��������%� ����2�����0�.��2��%�1

3� ��������)���"��������� ��%��%��� ���������%�����������6�1�12��%��%��� 7� ����� �����%"����� ���%� ���1����� �"��,&"������� ������������&�!��������G � !!1

��������%��,��/������������������������&��"!������ � ��%����������1

������ #��%&�#�!��)����!� ��� �&�0�����!!� �����;3!��;1����$��� �% �� &.�/�������" �����!��.�-��1����%�������$�+��!!� ��$������ ���#�H���������1

��&�%��/�������������)+������������0�.��'D��D��5� ��4(���H'1

� �"����� ����/�������������� ��� �����!�� &�0�� ������/&�������������1

4��H'

',�,��2

��������������-��������

�������&�����������#���������%��,��� ��������!#��������"!����/��������������B�����/&������������A?�$A?EE�B�3!��1

���&�H'�9�4���B�A?�$A?EE�B�3!��

Page 42: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

���

�������������������

� �����'���� ��(��+��!#�������!��% /��%����� �������#� ��������!��% �/��!� ������1

+��!��.���

* +�����!(� ��� ���!� ��� � ��I"� %�� ��� %�!! ��� ��!%�� � ���2�0���%�1

* �"/���!(� �"/���!� ��� � ��I"� %�� ��� ��� ���!%�!! ��#�����% �/��%&&���"��!"&���&��2���������$� ���"��&.��!����1�.%&������0� ������"/���!�

* 5�0���%�� ������%� ��-���2�0���%���������%��.#������ %&"������!�����������1

* �.%&���.%&������"/���!������-�%"����������"���!%�� � ��������������2�0���%�1���� �����!!��� �� ��� %.%&��� % � ��� /�&����1����%.%&���% �/��%����� ��&�������2�&&1

�����������

�����������

�� ���������

��������

����������������

��

��

��

��

��

��

��

��

�� �� �� �� �� �� �� ��

�������������� ��������������� �

���

��������

����

����

������

������

����������

���������������

�����������

�����������

������������

�������������

����������

����������

����������������� �!������"

#���! �$���%��% �&

����

��

#'(

#'(

��!�

#��

#��

#��

���

������))

������))

������))

*�����

+

�������

Page 43: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

���C

�������������������

* 3�&�� �����%��.��.���

!�1�+3 !� ����! !�1�+3 �"/���!

!�1�'( ���&��� !�1�3� �������������3!� !�1��� � ���&��� ����&� !�1�'� %�!!� � !�1��3 ���� ���� � ��� �&�/&� "��� ��� �

!0��

!�1��� %�!!� ����%��.#�%� �� �����!�#2�0���%�� ���%������ �� �������%������2���������-�� ��� �1���1���� !��� ��� ������ ���%�����6�+31���#��+31���#��>�+1���#�1117�������� ��� ��% � ���/��&����1

!�15+� 2�0���%�����%��.#�%� �� �����! �����!��"&��#�2��%��/�&� ��������2�0���%��6���!"��� ���%� �� ��������%������2���������-�� ��� �1�����15+�7

!�1�>+ %&��/��� ���%��.#� !.� %� �� � &&�.���������&��� �����%�����1

* ���.���+���

+&%������%"���� �������&�����/��%������ ��������������0�.��'+:1������&��2�&&�/��!0�����%��.���"%�1

� ����������%��.#�� �2��%������!0�����&�����"&��/�%������ ���������������0�.�+(���15���������� ����2�0���%�����%��.������.���% �/�

&�����2��������0�.�� 1

5�� ����� !�����������"%����&�� ������%��������&����"&��/�������!�#��������������0�.�'�15�� �����%��������&�����"&������� �2� !�#�� ������ �2� !�� 2���� ���� 0�./��� �� ����� �������0�.�'�1

���.

+���

'�

Page 44: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

����

* �� !�

+&%������%"���� �������&�����/��� !��� ��������������0�.����(��1����� !����&��"��2� ��2�2�&&�/����� ��1

� ������� �2� !�1

������&���.���% �/��%� ����2��������0�.�� 1

* ��&���

+&%������%"���� �������&�����/����&����1

���!0���,�&���&��#��&%������%"���� ������������&�#

���������0�.�� � ���&%������%"���� �����&��

��&�1

+������������0�.���>���1�� ��!���������.�I"�.�2������������0�.�'�� ��&&!0�����&��������%������2�&&�/����&����1

$ +��!��% �/����&������ &.�2�� ����.��� ���� ��%���1

$ �����&�����2�0���%�����%��.#� �����!�� �����2�0���%�����%��.�!"���/����&�%���1

$ 5�� � �2�0���%�� ���%��.� ��� ��&����#� &&� ��&��2���� ���������%��.�2�&&�/����&����1

* � /&�

(����!�% �/��2�0�������� &.�2�� �������� /&��1� /&��� ���!����!0���2���� � ;J;� � � ������!�&���1

���� /&�������/&������!#�!0��������! ���������������0�.�(>������(4>�1

��$ !�

��&���

'�

(&��� /&�

Page 45: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

���E

��������$������������

+������������0�.�5'��+����1�����K/���%���&&�5�0��L%0,����%� �����2����� ��/&� ���1+���� ��������0�.���51����� � �"��2� ��2�2�&&�/���� ��1� ������� !��������� �2�2�0���%�����%��.�2�������0�./��1

���� !��������������������!�2�&&�/���0����� ��������������������������!�2�&&�/����� ��1

�����������������

* ����� �2����!

'�� �����2�0���%�����%��.�� �2��%������ �2���$�!����"&��/��%����1+������������0�.���5� ��� ������� �2����! !�1����%����� �� ����&�� !��% �/����&�%����2�������

0�.�� 1

* ��&�%���-���� �����!

+&%�� ���� %"��� � � ���� ���!� ���� ���"&�� /�������1

+��������0�.� 1

������-�����������������&�%������&��2�&&�/����� ��1

5�0$���%�

�2

�2

Page 46: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

��8�

* ��������!

+&%������%"���� �������-��2��������%"���0�.�� �����0�.������"����������2 1

������&����0�.���&���������%�%��� &���� ��!����%"��1

����� �"��0�.�%&������/&�%01�(�>3���� �6&� ������7�2�&&/��2���� �� ����������!1�' &.�������������� ����/&�%0�2�&&�/��%%���������!%�� � �1

5������������0�.��'D��5����� ��+(����.�"�% ����&��/��2�� ��,�2���� ��� ����!���1

�0#�%��.#�����#���&����/&�%0)

+&%������%"���� �����/��� � ���������/&�%0� ��������������0�.��(���4>'��1��,������%"���� ������ ���������/&�%0� ������/&�%02�&&�/��!0���"��!��%&&.1

�'+:�4>'���%����������/&�%0�� �����%&��/��1�(&��2�������!�%� �������/&�%0���.��� �����%&��/��1

�������4>'���� ���������/&�%0���!�����%&��/��� ���������-��/���������%"���������� 1

��>����4>'�����&���������!0���/&�%01

4.������ ���� ��(���4>'���.�"�2�&&�&�,�����!0� ��!���1

�� "!/�)

5������������0�.������4����������!�/&�%0��� ����������2�&&�/��� "!/���1

�>'��(�I"�.�2�&&�/������&.���2����������%� �������"&�/�������1�����������-��������2�&&�/��%&����� ������%�� ����2���������!��,�,��21

+���',�2���

�0/&�%0

���./&�%0

� ���/&�%0

��&���/&�%0

�� "!/�

�&���

� ��

�� � � � � ��

Page 47: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

��8�

���������������

5��&�� ����� �� � ���!� ���� ���!!��� ���&!�,�!� ��� % � /�� ��!"&���� ����%&&.� �� ����%�� 14.������������!�% �/���������������!���%& ����!&�%��%� ���1�����%�� �����2�&&�/����%� �&���%&�!���0���6�1�12� ���� ����������� #�2� ��������#���%171

����&.�%�&��)&�������� �,��� ������2���������0���� �,��� ������2������������.�&&�2 ���%"&�#� ���&� �.!/�&#� �.!!��.� -��

��%1/&"� %�%&��"-�&�.�&� ��

���� ��!"&��� � 2� ��2� ���2�� ���� %�"&� .�������� �#�����#����&#����"���" ������� ����������� ��("�����!� ���� �&�1

+������������0�.�����>(��'�1

��������0�.���(��������������!"&��� 1

�����������/%0�������!"&��� 1

5���� ���A>�� ���� ��!"&��� � " �� /&�%0$/.$/&�%06%� �� "��2������(��71

H''��(��'�����&.��&&� �,��� ��������� ��������%��,��� �����������������2� ��2�����1

�'�'��A�������/&����������/��%���%�"��6% %�&���!��" %��� �7

���+>(:�(>>����2������%�!�&�����,��� ����������!%�� �1

H''��B� ��H''��$����� �������!� �%������ �������&.1+�,��"�&.��"���������%"&��2��������%"���0�.����������������%� ����������&.1

��>����5���'5�%&���������!"&��� �����&.1

����'���'(����3����%� �������������2����������%"��������1

�������" ������������!������1

��!"&���

���

�����

�� �&�

H��!("��

��'���

����&.&&

H��!$

H��!B

��&���2� ��2

�"��%������ �

����

�����������

����������

� ����� �����

������ �

��������������

��

��

��

��

��

��

��

��

�� �� �� �� �� �� �� ��

�������������� ��������������� �

��������

���� ��� � � �

�������

��������

����������

�����

�����

� � � �������

���������� ���

������

����

�����

������������ � ��� �

� !�!!!

"

#!�!!!

$

�%!�!!!

�&�&''

�(!!

�!!!!

���

��

��

��

��

��

��

��������)���*���

��+��

Page 48: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

��88

��!"&��� ������ ��)

��������0�.�������A����� ����������� ���2� ��2���������!"&��� 1

����� ��

5���� ,��2� �& �� .�"� % � ��%���#� 2��%�� �& �� ������&.���� ���!"&��� 1

4�&�2��2���&.�.�"�% �� ������&.���!��/��2�� ������!"&��� �/&�%0�1�4.�����������!"&��� �2�&&�/�!�������� ���,�1

5�� � .�"� ����� ���� 0�.� � � 2��&�� � " � �

��!"&��� #������������������!"&��� �2�&&�" �2����"���&.1

4�&�2� ������� � �.��� .�"� % � ��&�%�� 2������ �����!"&��� � ��� 2�&&� /�� ����&.��� � � ���� !%�� �%���� ��� �.���!� 6���7� �� � � ���� 2�0���%�%���� ����.���!�65��71

��%&��2����"-�&�.�&� ����&�%��������&�%����������&.�������� ��������� �/��2�� �����%�%&��� ����� ��1

�������&����������!"&��� �2������2����"�����&��������1

(%��,���%"�����!"&��� �2����%"������"��%�!�� ���� ���2����"�%"���� ��"��%�!�� ���� � 6����&.���� ���&�%� �����71

(%�"&�%� �&��&�%��� ��������%�"&�%� �&�6� &.�� �!%�� ��2����!����� �� ��%� �&71

����������������� ����������������

����������������� ������������������

���� !� � ���!#� ���� �"/�"�� ��� �� ���%.%&���!"���/���&��������� /&����!"&��� 1

���������������������

��������������� ����

����� ����

�� ��

����������

������� �

���� ����

���������

��������������������������

�����������

��!�������

"������

#��������� ������������

$ �

��������������� ����

����� ����

�� ��

����������

������� �

���� ����

���������

��������������������������

�����������

��!�������

"������

#��������� ������������

$ �%&�

������������� ������

�� ������

�� ��

������ ���

��������

���������

���������

����� ������������������ �

�� ������ �

��!� ��� �

"������

#��������� ���������� �

����� �$%�

Page 49: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

��8<

������������ �������

����'���� ��(����,�%������"����������� ���� �����,��� ���%���'���$��'��1

+� �����2������������0�.�+������#� ��� �!������������!����0���,��2������������0�.����D�1

.��������������

3�� ��� � �!����� � ���� ����� ��� ��� �� ��� ��%��,��!"���/�������!�#�����2����� �!����� 2�"&�� ���2�01

5�������'�5� ���.�"�% ��� ��� &.�,������� ���%����8<8������1�����" %��� ����8<8��+A�+����� ���%��,�1

+������������0�.����8<8�������� �����1

+&%�� ����%"���� � ���� � �"�� ���&��� ��� ��� ���%����� �� ��,&"��1

���� ,&"��� ��� ���� �!���� � ���%�#� +���%�&#4"����#������/���#�+��.#����/����% �/����&�%���

2������������&��0�.�6� 71

�����!�����+���%�&#�4"����#�����/���#�+��.#���/���#�J'�$��� #�J'33$��� � ��������� &������� �������&.��,�������,�.�� ���%�1�5��&�%� �� ������� ���%������ �2��!����������2 ��% �/��!�������1(&����������%�&��" %��� ��% �/����&�%����2�����������&��0�.1

��������� ���% �/���,���2������������0�.��(D�������A1

�,������ �

������������

+������������0�.�����D�� �����1

��&�%��3&���.�6��,��()7���3������%��.15������������� �3������%��.�.�"�% ���&�%�� .���%��.#��1�1�� �������0��)1

�������%�&��" %��� ��% �/����&�%����2������������&�0�.1

��������� ���% �/���,���2������������0�.��(D�������A1

�,������ �

������������

�����������

�� ���������

��������

��������������

��

��

��

��

��

��

��

��

�� �� �� �� �� �� �� ��

�������������� ��������������� �

�������

�����

����

������� �

����� �

�����������

����

������� �������� ���������

��������

� �

�����������

����

���

������� �

�����������

!"��������

#��� $ ��

!������� $ ��

�� ����������� ��

�����������

�����������

�� ���������

��������

��������������

��

��

��

��

��

��

��

��

�� �� �� �� �� �� �� ��

�������������� ��������������� �

�������

�����������

��������

��������

�������

��������

�����

��� !

�����

"�#�$��%&

"����$��%&

'���������� (�

���) ������� ��

����* ��"�#

�+��*� ��* ������ ��� ������!

���� �,�'����������-����!�* ��.�

����* ��'�/���������

'+�������� � ����

.������������ ���

������/���������

/ �����

�������� )� ��� ��010������

����

/�2�/�

3455

-� ��

6

��

�1

��

������

���

��������� ���

�������������� ���������������

������������������� �������������

��� ������������

��������������

� ������� ��������������

��������������

Page 50: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

��8�

���/�������

��&�%�������"%��2��������0�.����8<8�������������D�1

+������������0�.��(�(���1

+&%�� ���� %"��� � � ���� ������� ���%��.� � � ������%��.�&���1������� ��$� �2�&&� /��2���� � � ��� ����� ��&�%������%��.1

5���� ���� ����0�.�

� .�"�2�&&� ���� /%0� � ��� ���

�"��������%��.1

��������0�.���(����������� ��� 1(&&� ��� 2�&&� /�� 2���� � � ��� ���� ��,��"�� ���� �����%��.1

��������0�.���'+���������� ��� 1

�����)* 5��&�� ��� �� � � ��� ��� �����/&�� ��� %&&� "��%��� ��&�%�������/.�����%� ��&�� &.���!����D�1

* 5�� ���������� �;',�2����2����%� ��!��� �� &.;�����&�%���#��-���� �����2�&&�/���,�2���� �� &.����%� ��!��� 1' ��=�%�#���$� �2�&&�/��%� �� "���2�������� �-���&�1

* ' &.����2�����,&����-�� ��� �6�1�1�1�+37�% �/����� �6�-%������$� �� ���%&��/��71

����

���

����

��,����8<8����� ���

�����0������#�� ��/������

(����I"�����������������-%� ��������������!�������� ����� �!����� ���%��,������ %%�� %��6��������� �� �����,�%��71

* �����%��,��������.$��$�%��,������������%�/��" ���;����� ���;1

* �����%��,�������.$��$�%��,������������%�/��" ���;����"����;� ��%� ��!�/.�!� ������������0�.���(��1

* (%�"��� ��$� � � � �%��,�� /.� !� �� ��� �������0�.���'+1;��;����&�%��%��� �,&"�����!�����5� ���!.

/���!������� �������!%�� �����&��!� ������ #�� %���������%��"��!.�%"����.���!����1

Page 51: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

��8?

+�������

��&�%���� ���������2��������0�.����8<8�������������D�1

+������������0�.��(�(�'��1

:�"�% ��� ����&&�2� ������.���)* ���6���&� ��!��� ����#����!���#�����������7

* 5�0���%��* +�����!�* �"/���!�* ����%.%&��* �� ���%.%&��

��&�%��� ����������/���� �)

+&%������%"���� ����������������.��1

�1�1�����%"������� �;5�0���%�;15�� �.�"������ �!����� � �2#�&&�2�0���%���2�&&/���� �1

+������+��� ���&�������2�0���%���2�&&�/������&.�� ��.�"�% �!0��2�0���%�15�� �.�"������ �!����� � �2#�&&����� %&"����� ����2�0���%��6���!�#��"/���!����%17�2�&&�/��� �1

+������+����� � ���&��������������� %&"����� ����2�0���%��2�&&�/������&.��#���%11����.�"�% ��� ���� �&����&��1

5���� ���� ����0�.�

� .�"�2�&&� ���� /%0� � ��� ���

�"��������%��.1

��������0�.���(���������� �� ����1

��������0�.���'+��������� �� ����1

���'"�

���

����

��,����8<8����� ���

Page 52: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

��8

�����������������������������������������

� �����%&��/���&&��.����������!.�/��������6�1�1������$� ���!����&�� ���%����%171:�"�% ����� ��������� 6���!�#��"/���!���%17� � � ���� %����� �� �� ���%������ 6�+31���#�+31���#���%171

+������������0�.��>�+4'(��1

����%"�������&%���� ����&��� �����%&��/���2� ��26&�2��2� ��271+&%������%"���� �������&���������"&��/���"��� ���������%��.���"%�"�1

+&%�� ���� %"��� � ��� ���� "���� 2� ��2� 6����2� ��271

+&%�� ���� %"��� � � ���� ������� ������.� � � �����"%�"�1� �����������%��.�������&����!�����%&��/���2�&&�/�2���� 1

+������������0�.��'+:�(���+(���1

����%� ��&��0��������&�� !�1�����������&�� !���� ���� �2� !�1�� ��!�2����'�1

������&�����%������� ���������������%��.1

A��/%0�����������%��.��,�,��2�2������������0�.

1

�����)* ������&���2�&&�/��%��������!�����%&��/���/"�� ��"��!��%&&.���&������ �����%&��/��1

* ���� ���� ����0�.� ��>���� ��� ��&���� ��� � � ���%&��/��1

�&��$/��

'�

��&���

���.� �����

Page 53: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

��8C

��������������������

����'���� ��(����� ��������2��&!�� �!�������� ������"&&�&� ������!1

5���� � %��,�� &!� �� !������ %� ��� ��� ���'���� ��(����� ����#����������&&�2� ��� ��!��� )

�"!/�)(&!� "!/�1�5������,�&�%��,��&!������2�&&�/�����&.���� ���!����I"� %�1

���)�-%�����#���!��2�� �����&!��%%"��1

��&����%����)����&.��������0�.�����!"���/��������������&�������&!1

��-�)3"&&�&� ������-���������&!1

��������������������������

+���� ���� ����0�.� �5� D����'��� ��� ���2� ���,���� ���������� ��,��"&�����2��%�!�� � ��1������,���� ��!"���/��� ��%����2�� ��I"���� ���,�%�1

Page 54: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� �������

��8�

������������ �������

����'���� ��(�����$"����� ���%��,��� �5� ��1

3��� %&"�� ��%%�������#�"��!������ ����%1�"������"-�&�.�����2��;5� �� ���;

Page 55: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���

����������������������� �������������������

�����������

����

����� �� ������ �� ��� ��������� ��� ���������� �� �� � �� ��� ����� ������������������� ��� ���� � ������ �� �� ��� �� ���� ����������� ���� ��� ��� ���������������� ���������� ���������������� �������������� ������� �� ������������� �����!�"#�

$% ���&������������� �������������'())�**�� ������������������������ ���������+��������������������������� ������� �����

������� ��������������+����� ��� ������������ �������������,-�.�&�/"�0#"�123*4�

Page 56: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��#

����������������������� �������������������

����������

������

������� ������ � ������ ������ � ���������� ������ ������ ���������� ��������� !���" ������ ���������� ���������������� !����# ������ ���������� ������� ������$��� ��������% �!������$�& �' �����������($�� ��) *�� ������ �������������+,�- *�� ������ �������������+.�& *�� ������ �������������,.

�/����$�$������ $$ 0���!�� ���� �� ���$�� �����1������ $$ 0�������������������$�� ����

�2� '�$�$������ $$ 0���!�� ���� �� ���$�� �����1������ $$ 0�������������������$�� ����

"" 3��� ������������� ��""� 3�� ��� �����""� 3�� ��� ������1����� �����%� �������� �������$���� ������44%� �������� �������$���� ��������5�6�%� �������� �������$���� �������������/" ���������������� 0���7�����66���/%(/) 8��� 0���7�����66���/�� ������������7�����66���/�/(/&& 8��� 0���7�����66���2� �' ��������$�� �2�� 8������ 0����6�������������!����!�6������ ����2�� 8������ 0����6�������������!����!��� ������ ����2�" 8������ 0����6������������ ����2" 3�� ��� ������!��������9�������7 ����2% �����������$���2%� �����������$����!��������� $$ 0����� ����������������)� ������9���$�����)� ������9���$�$�����&� �0���������$���������&� ����$��� ����$���������&% 4�������$$1$��:�����1$��&/ ��� ���� ��6����� ������$$1���:�����1���&2 ����� �������������������&) ����� ������������������44��� #����� � $����:�!������6������������ ��� �������������������� #����� � $����:� 0��������������!�� ������������� ����9���$��� #����� � $����:�!������6��������������� ���� ���������%� 8�6�� ���� ��� ����� �����%� ��������6��$�������6�� ��1����� �����6��$�������6�

Page 57: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��3

����������������������� �������������������

������� ������� �����������������������������������������������������

�� �����������������������������������������������������������������!�����������!����������������������������������������������

��" ���������#������!��������������$ %�������#������!������������ �" ���������#������&'������������ �$ %�������#������&'������������ �( ������������������������!�����)!����������!���������'�* �� ���������������������������������� �" ���������#������!���������� �$ %�������#������!����������+( ������������������������'��+� ������������������������'�

Page 58: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��5

����������������������� �������������������

��� �����

������� ������� � �� ������������ ��������������� �������� �� ���� ����������� �� !"����# ����������� �$��� �� !"����% �������������& '���� (�����) �����������* �������������� +� !���,������(������ -��� !���,������(�����. �$/� �� ��������% �����������,� �0�,� ��������& �����������,� �0�,� �� ������. �"�,�����,������(������ � �� �������.� ��������������������.� �$���/��"�������.� �$���/��"�������

Page 59: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��*

����������������������� �������������������

�����

������ �������� ������ ������������� ������ ���������������� ������ �������������������� ������ ����������������� ������ �����! ���"�#����$�������� �����% &���$���""���� �����%' �""����(��#����"��)�������#��*� �����+ ��������� �����, ��������� ������ �������!� ������ �������%� �����- �������+� ����-' #���$���������.��/�� &�(��0�#����(��#�1�2���.��/�� ��������0�#����(��#�1�2���.��.�� ����#���)������������3.�4��� &�����������"��*��3.�4��� ���������"��*��3.�4��! &�����������"��*��3.�4��% ���������"��*��/�.�� /���)������������/�.�� ���������)���

Page 60: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��!

����������������������� �������������������

��������������

������� ������� ��� ������� ���������������������� ��� ������������������������������������ ����� ���� �������� ������������������������������������������ ���� �������� ���������������� ������� ���������� � ����� �� �! ������� �"# $������ ��%� �" ������� ������"���� #�������� �������� � ���������������� ��%�� !&�������� � �' ���� ���������� ��%�� !&�������� �#���� ��� ������ &�������� �' ��# ������!!��� �( ����))� �*+���*+��'*+� *+"�

*����� ������

*��� $������ ��%� ��#� $��������%�,����)���-�!��������������� ������������ ����������,������� �! ���� �������.����� ���������������/�0� $������ ��%� �01 �� ������!) ��.���!) �/� ����� ��������1� ���������) �������������1� ���������) ������� ���������)������ �����������&����������) ����������� ��� �)���

�� ������������.���������) �������� �����������/�1'�� ���������) ����������� ��� ���������'� �� ������� ����������� ��������������������)��!�0 �� ������!) �� '�����))� ����!� ��� ���������������������������������������� ���,�%�.��� �������������/����1 �����������! ���������� ���! � �������! �������1 � )�� �������� �#���1 #���� ������� �������2�������%�#���� ������%������ �������!�,����,����$ �� � ������������1�3�' �� �2��������� ���1����# ������������!!����#� ��!� ����������������� ����� ��

1� ���� ��������!!�����)��� ��������������� ���������������������#�� ������� ��)��� � ����������)��� �!���������� � �����������)���������������� �����

�# ������� ��)��� �!����������� �� �� �)��!��� �������������������������)���������������� �����

��#� �� �2��������� ����1� �� �2��������� �������� �� �2��������� ����40�� �� �2��������� ����1 �� �2��������� ��"��'�* *���2��%�����2� � ��������)��������� � ! �����)������� �"��3'� ����� )�������1 1 �

Page 61: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��6

����������������������� �������������������

������� �������� � ������������������� ���������������� ������� �� �����!� ����"�#�"�$��!�� ��� ��������� ��$�����#�$%�&�' (�"���$��������$�!�� �)�"�������$����$�����!�����&�� (�"���$��������$�!�� �)�"�������$����$� ��!����* �������� �����������$������� �$������$%����+����������$��$���"�$����,�$���"�$����������$����-� �����������!���� �����$�����$�& $��%����!�� ������$%���%$�&����� ������������$���������������$��$��������� ��"��.� ����������$��+����#��������,�$/�����#����+���$�"���-(* �������� �����������$������0��& ����������������"��$�����$1�������$����$������$��������$���$�����$�0* �������� �����������$������2�� ��������"������$2��3 � �����������������22 ���������������������%��"������,� �� ����!�$%����������������#���$���������������������

!�� ����22�!�� ��������"����-�,"���������-�� �����%����������$��$�����"����� �������$%� ��������� �������$�"�����& ��%����$���� ����������������"��$�����$1����������$������������ �,$��"���������� -���� � �������$���4$��"���� 2�%����������$$�����$3 3��%��"�������3� $�������$�� �� �� �������� ���������� �$%��$���������$%������$���� �������53�,666-3� $�������$�� �� �� �������� ���������� �$%��$���������$%���� ����������#������$�3��� ������%��"������� �4����"������7894�7::9��& ��������������$��������$�,�������$-���2 �����$�"�����& ������%��""����������� $�����������������$��������$���,���$�-���� $�����������������$��������$���"�����,���$��"����-�3 3������������,������������-�32 �������$�� ����$���3 �������$������;����$� ���$��������������� ��#�$%�� ����%���������������%��""������$%��&�2 ����"���������%��""�������$�����$%�� ������!�����& $������;����$�� �#������������&�� �� �$��"���������$����� ������$%����$��� ���1��$���$������ ���"��������� ������3��� 3������$���$�����������$������������$�� �3��� 3������$���$�����������$������������$��$�&�� ����������������2� ������������ ������,�����-�&�2�� ����$%���������$�3�� ���$�����������$�3��� ���$�����������$�<'�&� �� �$��� �������� �������$%

Page 62: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��7

����������������������� �������������������

������� ������� � ������������������������������������������ ������������!��"�# ���$�����������������������"�� ���$����������������������%&��� ��$��''�(������������� �����������!% %�����((����%�&� ��')����������������*������������ �����!%&�#��# ������+������������+����������'������ ��������'���������!%&��," -./���������������'�����%&����% -,/��������������'�������%" �*��������������0�& �������+����)��1�% 1���������*���2�����������*����+�����$1�%� 1������������(���������������)������*�(13"� �*��������������1�"��# 1�����$�����(���'����$����1�"��� 1�����$�����(���'����$���-�& �2�����+��&

������������������

������� ������� �� �� �� �� � ���������� ����������� ���� ������������ ��!��� ��������"��� "#�$��� ������������ ��� !��� ������������� ��� ��!��� ���������"��� ��� �#�$��� ���������"��%�� ��� �#�$��� �������� �!������ &� !������ ' �()"� )��� ��������*�"� *�+�� ���������()� �,�#���$ ���������&*� �-.������#/ �������� �0#!� � 1�� 1�$#����� �������� �0#!� � 1�� �#���#/ /�$#����� ��������* ����/� .#������� ���0�� �2345467%333 ")8� /�$�� "��� �4 9�1�� /�$�� 9#/!� �: �;�� �0!�/��� ��������")8��� ���$�� ���0�� .#�� ��������)�8��� )���<��$ ������������ ��<�/#� ��������

Page 63: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��8

����������������������� �������������������

��

���������

' ���� ��� ���%��������� �������������� �� ������ �������������9��� � �� ���� ��� ������ ��� ��������� ��� ���� ���� ��� ���%������������ ���� �����������+��� �����������:$���:�������� �����������������

(��� ��������������������������� �� �� ����+��������� ����������������� ��������������� ��� ����������������� ��� ��������� ���

���� �������� ���� ���� ���� � �� ��� ����� ���

����� �������

� ��

��������� ��������������� ���� ������������ � ������� ��������������:;:�

������������ ����������

COMMAND DESCRIPTION EXAMPLE RESULT

+ addition 1+1 2

- subtraction 3-2 1

* multiplication 5*3 15

/ division 15/3 5

% modulus (remainder) 10%4 2

^ power 5^2 25

PI circular graduation number PI 3,141593

SIN( ) sine SIN(90) 1

ASIN( ) arc sine ASIN(-1) -90

COS( ) cosine COS(90) 0

ACOS( ) arc cosine ACOS(-1) 180

TAN( ) tangent TAN(45) 1

ATAN( ) arc tangent (value) ATAN(1) 45

ATAN2( , ) arc tangent (X segment, Y segment) ATAN2(0,1) 0

EXP ( ) exponential function (base e) EXP(1) 2,718282

LOG ( ) logarithm (base e) LOG(5) 1,609

SQRT ( ) square root SQRT(2) 1,414

MOD ( , ) modulus function MOD(10,4) 2

TRUE true TRUE 1

FALSE false FALSE 0

AND conjunction 1AND1 1

OR disjunction 1OR1 1

NOT negation NOT(1OR1) 0

Page 64: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���"

����������������������� �������������������

����������������

��������� �� ������������������ ���������������������� ��������!��"� �����������# ���������������������� ��������!��"��������������$ ���������������������� ��������!��"�����������%&'�() ������������ �����������&'�() ����������� ��� ����������*&'�() ������ ���������� �������+&'�() ��������������������,%&'-. ��/��� ���������01234���& ���������&�������� �����

����'5',�6�0&�7�)48�������������0+',)48������������

����)�'�9��0+',)48�*���:�������0;�������;����������������4��������

���+<<7' �����������������0����4

���+<<7�<�������������� ��+6�"�+$#666

����(��,( (���������������� ���(�����7%�1��5�+)(�%��()+'%� 1�������������(������0�8�(�����=�#8�%���4�(�����7%�1�>�7,)�%��9 �����������:���������(���������%����0#2=34�(��%�+�%��'��)'�(( �������� ����������������������������������(��(%''<'�')&��� '���������!������������������������%( ��0+',)48����������������� ���������%'-. 7��������������������������������� ����� ��������11 ��������1��������������1� ���������?���������7�������������)� ���������������� ������(����%������%1��+<�(��9�� ���������������������������������������!���(���,(�)��� ��� ����������������

������������������������8�� �������������������������������������

�(���%�()+)'�����)& �����!������ �������-. �����������������

���+<<7������������� ��6�"��@

���(�6�0&�7�)48����������� ��� ��������0+',)48�(������ ��� �������

���+<<77 ������������������� �����%�-. �� �������������0�"�A4���<,+-. �� ����������������%��-. ���� ����������0�"34

Page 65: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,
Page 66: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���#

����������������������� �������������������

����������������������� ����� ��

/# ���������/3 ���������������(A � ��������� ��������,�������������������4

<���%�����&A�� ������ �� �+��� �� ������������� �������2����1� �����,/�64�(�������� ����������� ��������B��������������������������������������������� ����������C=�>��

���� �� ��� ���� ����� � �� ������ ��� ���� ��������� ����?�� ������ ��� ������������ �� ������������ ��������� ���,�� ��4�(�� ��� �������������3�� %�������� �����,�������/�6�����1� %��4� �����%�����������������

��� ����������� ��������������������������

/#D/3 0�� 9�� 1�� (�� E�� F��

0+�9+�1 ���������$����� ���� �������� ���(+�E+�F ������ ������ ����� '� ��� � ���� �

������ ���+��� ��������� �������G

G� ������������ ���������������������������������� ������������������� ��2�����/#D/3�

$������������������������� ����������0+�9+�1�

������������������������������������������ ������������� ������(+�E+�F�� ������������� ��������������(>@�,��4+E>@�,��4+�F>@�,��4� ������������������������-�������

���

���

���

���

���

��

���

���

���

��

��

��

�� ������

�� ������

Page 67: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���3

����������������������� �������������������

��

����

��

��

��

������

������

��

��� ����������� ��������������������� ����

/#D/3 0�� 9�� 1�� �=>H��

0+�9+�1 ���������$����� ���� �������� ����=>H ������ ����

G� ������������ ���������������������������������� ������������������� ��2�����/#D/3�

$������������������������� ����������0+�9+�1�

������ �������� ������ ����� ��� ����� ���� ����� �=�� ���� ��������� ��������������������� ������� ������� ���� ���7"I��=>J ������� �������B� ���7"I�=>2 ������ ����7"I�?������������ ����������� �����������=�

G� ������������ ���������������������������������� ������������������� ��2�����/#D/3�

$������������������������� ����������0+�9+�1�

������������������������������������������ ������������� ������(+�E+�F�� ������������� ��������������(>@�,��4+E>@�,��4+�F>@�,��4� ������������������������-�������

G� �� ���������� �� ��������������� ������ ��3!"I�?������������ ����������� ����������@=�

��� ����������� ����������������������������������� � ����

/#D/3 0�� 9�� 1�� @=>�� �/#D/3 (�� E�� F�� @=>��

0+�9+�1 ���������$����� ���� �������� ����

(+�E+�F ������ ������ ����� '� ��� � ���� ������� ���+��� ��������� �������G

@=> �� �� ����

Page 68: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���5

����������������������� �������������������

��

���� ���

����� ��� �

����� ���

����

���

��� ������������ ������ ���

/#D/3 @A>�� =A>��

@A> ���������$��� � ����+�������������������������������

=A> �� � ����+� ������� �������������� ����

����������������� ������� ������������������ ����������������������,� ��������������������������������/���4

��� ����������� ��������������� ����������������

�(A 0�� 9�� 1�� (�>�� E�>�� F�>��

0+�9+�1 ���������$����� ���� �������� ���(�+�E�+�F� �������� ��� ����� 1� ��� � ���� �

������ ���

G� ������������ ���������������������������������� ������������������� ��2�����/#D/3�

$������������������������� ����������0+�9+�1�

(������� ������������������� ������������� ����������(�+�E�+F������� /8�� ,�������� �� �� �����4� ����������� ������������� ������������� �������

Page 69: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���*

����������������������� �������������������

����� �������� ����

��������������

#�������������

3������������

������ ���������

G� ���������

$����������� 2�� ��� �������

/#D/3��0����9�����1�����(����E�����F������C=�>/#D/3��0����9����1������=>������C=�>/#D/3��@=>�����(����E����F������C=�>/#D/3��@=>�����0����9����1������C=�>/#D/3��@A�����=A>������C=�>

0+9+�1 $������������ ���� �������� ���(+�E+�F ��������������������� ���� �

������ ����=> ������ ����@=> @�� ����@A> A�� � ����=A> A�� � �����C=�> ��������� ������� �������� �����������

���� ����"����888

?�� ��� ����� ����� ������ ��� ���� ������ ����� ���������:����� ������� ����:�

Page 70: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���!

����������������������� �������������������

�������� ��

��� �������/"5��?��� K���L������/"5��G��� KCL

? ���������������������G ������������������������ ����������� ��������

������������������������������� ���� ������������2��� �������2�� ��������+���� �������D���� �������+�% ��������������

����M ���� ������ ����� �� ��� ���� ���� ����� ��� ��� ���� ������������ ���������"�

M G� ���?� ������� ������� ������������/5������������@�� ������� ��������� ���?��������������G�������������

� �����6*��/"5��?#�* ,�����������>�#+*����4

Page 71: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���6

����������������������� �������������������

������������

����� ���� ����� ����� ���!"�� ���� ���#

/8 $% �������������+�������� �����������/!" $% �������������+���� �/!"� G����� ������������������������������� ����/!"# G��� �� ���� ��� ����������� ������� �� ��

� ����/!"3 G����� �������������������� ������ ����

/!"�D/!"#D/!"3� ��������� ������������ ��� ��/!"��/8����� ���� ���� /!5+� /!5�� 2� ���������� �������������/!"�

/8D/!"&@��� ��������/!"�+�/!"#���/!"3�/8� ��� ������� �� ��� ���� ������ ����� ��� ������ ��� � ��� ����+�/!"����������� �� ������� ������������� �������������/!5���/!5��

/!"�+�/!"#&������������������������������ ��������� �����������/8D�/!"� ���� ����������� ������ ��� �� �������� ,������ ����������� �� �����������4�.�� �� �� ���� ������ ����� ���� ��� ������� ��� ���� ����������������������� ������ ������������� �������� ������,/!"�4����� ��,/!"#4����� �����������

/!"3&������������ ������������������������� ������������������������ ���� ������������� ������ ���"���������������� %���,����� �������4��@����������������������� ��� �� �������� ������ ���� ���� �������.���� ������������������������������/!"3������������������������������

$% �������������� ��� �,/8+�/!"4

$% ����������������� ��� ��,/!5+�/!5�4

Page 72: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���7

����������������������� �������������������

� ���� ����� ����#���$

/!5 ��������������/!5� ���������������������� �� ���

�������

������������������������������� �������� ��� ������ ��� �������������������������������� ������������� ���������� ���������

@��� ������ ��� ������������������� ���������� � ������� ��� ������� ��� ���������+������������������ �������������������������������

����� ������������ ���?������ ��������������������������,���������4�

�������� ���/!5�� �������������� ������������������ ����

���

���

��%����&������'��(�#�������� ��

��� �������/�6D/�7D/�8

/�6 09�� ��/�7 10�� ��/�8 91�� ��

/�62/�8��������������������� ���

M ��������� %������ ���� ����������������� ���M ������ ������ ����� /#D/3D�(A� ������ ��� ���

�������� ���M A�� � ������ ��� ������ ����� ������ ��� ���

�������� ���M ������ ����������� �����/5�D/5#���������

������������ ���M ������������� ������������������������������ �

���� ����������������� ���

��

��

��

��

����

��

��

��

��

����

��

��

��

��

����

���

���

���

Page 73: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���8

����������������������� �������������������

��)���� ����#�����*�����(�#�������� � ��

��� �������/#*D/#! 0��� 9��� 1���

/#*D/#!������ ��������������� � ������������������� ��� ����.�� �� �� ��� ����������� � +� �� ����� � �� ������� �������������� ������������������� �������

/#*� ���/#!����������� �������� ��� ���� �������������� �� ����������� � � ����� ���������� ������������������� �����/#*� ���/#!+� �������������� �������������@)('N�� ����@)('N?�

/#* )����������� � ������ ����/#! C��������� � ������ �����@)('N� ������� � ������ ��������@)('N? ������� � ������ ��������

��)���� ����#�����*�����$����$���� � ��

��� �������/#*D/#! G���

@��������� ��� �� %����������������� �����������������/#*D/#!��

/#*� ���/#!����������� �������� ��� ���� ������������ �� �� ���� ������� ����� ����� ����� ����/#*D/#!�� ����������� ��������������������� � ������������������ ���� ������ ������

/#* )��������������������� ����/#! C������������������� ����G '���D�� %������������

Page 74: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��#"

����������������������� �������������������

�����+,��$��� �#

��� �������/33��1����F���

F ��������� ��� ��������K��L1 ��������� ��� ������

��� ���� �������������� �� ��B� ��������,������2����������� ������� �4������������,F4�������������������� ��������������������� ��������������� ����

����M ?���� ����������� ����� ������ ��� �������/33

,�""O4�M @�� ����-������������ ��������� ������������

����-�����+����#��� ,�� ������ ����,��(

��� �������/33���0����1������F���������/33#��0�����1������F���

0+�1 ��������� �������������,$�������4F ������������� ��� ���� �

������������+���� ���� ������������12���������+���� ���� ��F

����

����

!""#$ �����%� ������������������������������������,������������������ �4� ��������� ��

!""&��� �������'�����%������� ���������������������������� ����� �� �����/33���� ������������ �� ����������������������������������������� ���� ��� ����

��

��

GANG�� ����������������� ���������������� ����

�����������

(���)��������#**+

Page 75: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��#�

����������������������� �������������������

� ��+,��$� ����#��� ,������� �#�,��(

��� �

/!3 0�� 9�� 1�� ?�� G��

��� ������������������������� �����

A�� ����� ������� ����� G+� �� ����� ���� ���?� ��������A��������� ������� ���&?�K��D���L�>�G�KCD���L�%�A�K��DCL����?�K��DCL�>�A�K��DCL

������ �2����� �������������� ������ ���������/!3�/!3����������� �������������������/!3���������� ���������� ����� �������������""O����� �� ������ �� ������ ,����� ������� ��������������4� �������������� ����������/!3�

$% ���&� �'*�,�����A�>�"+7���4������������G�>�#""+���������?�>��!"

��" /� 0" 9" G#"" ?�""" '3, � ����� ������4

�#" /!3 12*" ?�!",��� ��� ���+���� �������*"4

�3" /!3 13 '5,�� �����+��� ����������������������4

Page 76: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��##

����������������������� �������������������

+����.�$���������� ������/�������)�

�����/5�D5#����������� ����� ���B������ ��� ����������� ����������������� ������� ��������������������������������� �����)���� ��� �������������� ������������ �����������������/5�D5#�,�����D��������������������4�

A�� ���������� ��� ������� ����������������

����� '����� ���������!,*-

/5*"&���������� ����� ����� ���������������� � ������������ �����

!,- $��� ����������� ����.��!,# $��� ����������� ����/��$,�������������4!,& $��� ����������� ������!�$,������������4

���

���

������

����

����

���

���

Page 77: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��#3

����������������������� �������������������

!,# ����� ����������� ��������

������������������������������������������ ������, ������ ��� ��������� ��� ����4+� /5�� ����� ���� �����

�����M �������� ������������/5��2�/5#�������� �������2� ����������������������/5"�

M G���������������������������� ����������/"���/�,@� �������� �����4�

M ����� ������� ����� ��������������� ��� ������� ����������� �����

!,- ����� ����������� ����.��

������ ����������� ���������� ����������������/5"������������� ��� ������������ ��������� ���������� �� ����� �� ������ ,/""+� /"�4� ,�� ������ �����4�/5"�� ������� ������������� ��������� ��/""��/"������������ �����������/5"������� ������ ������������ ������������������� ���������

!,& ����� ����������� ��������

������������������������������������������ ������, ������ ��� ��������� ��� ����4+� /5#� ����� ���� �����

����������/5�P

� ���������������� ����������� �����������

� ���������������� ����������� ������� ��

Page 78: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��#5

����������������������� �������������������

/*3 ����-���������������������������������������

/*"" /*5�2�/*88� ���������������

/*52*6 G��� ����-�����������

/*"*2*88 G��� ����-�����������

GCA@ .��������� ��������+� ����������� �����-����������� ����=?��������,01�����2��4

0����11� ���)�/�)%���)��/�)���23�4

1��������� ��������������� ������������������������������������� ������

��� �������������� ��������������������������/*52/*88���� ����������,�

�4� �������� ������� ����,��%

�����4+� ��������������������������������������-�������,�

�4�������������=@�G�, � ���4�

������������/6"�D�/6���������������� ������ �����������������������&M A �������� �������0+�9+�1M ������ �����(�+�E�+�F�+�(+�E+�F+��=M ��� ������M A�� �� ����-������������=@�G+�@�=@�GM A�� � �����=A

@�������� ��������������� ���+��������������������� ����-�������������������� ���� ��������� ��������� �� �������������� ������� � �

��,�$��������%��5 ����$��������%�

Page 79: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��#*

����������������������� �������������������

����

��

��

��

��

�� ��

����������-���������������������� ����� ���������� �� ��� ������������ ����-���������������J �Q��� ����-����������������J�� ����

�������������� �����

'��(�#�������%/���

(�� ���� ������� � ��� ���� ����� ����� ��� ������� �+ ���� ����������������� �������������������

' ����������� ������������& /�7�,104

����4*���� �$�������������������������������� ��� ��-������������������ �����.�� ��� �������������

�������� ���$��������������������������������� ����� ��������������������������� ������.�� ����� �������������%����������

G������ %��� � �� ��� �� ����� �������� ��������� �������������������/8"�D�/8��

$% ����&

/8"/"�05"�1>(�,#"4<����������1� ������������ �� ��������/8"�@���2������������������� ��� ��

/8�/"�0#"�1>@�,�"4<����������1� ���� �������� ��������/8��(������� ��������������� ��� ��

Page 80: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��#!

����������������������� �������������������

6$����#�����#��������)

!��� �

M ?���� ����� ��������������������/6"D6��,����2��4+����������� ��������������� � ���� ����

M @����� ����� ����/8328*�?����������� ���� � ���

M ��������� ���?���� ������� ��� %�������+���������������������� %���

���� ������3���!4,

G������� ������0+�1&���� ������?������������� ��������D����' ��� ��� ����������������

5�����6����31!4*

G������� ������0+�1&���� ������?������������� ��������D� ����������������������� �� ����� ������������7

Page 81: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��#6

����������������������� �������������������

���

���

��������������

���

���

���������������

� ����

/��� 13" 05"/� =A>5" @A>!" ?3""

/����������������������� ����������������3"D5"�

/���� ��������������������� ��������������������� ������� ���=A5"D@A!"����� ����� �� ���� ��� ���� 1� %��+� ��� ���� 1� � ��� �����������������/����������

����������$�� ������/����

������� ������� ����� ������������������������������� ���� �� ����� ��� ����+��� ��������������,-����������������� ������� ���������4�

������� �������������

/��" A�������������� ������������ ����� �����������������

/��� A�����������+��� ����������� ��� ��-���������������������������� ����������

/��# A�������������� ������������ ��� ��������

���� ���� � �� ��� ����� ���� ��� � ���� �� �� �� ������ ����

0+1 ������ ���������������,� ���� �4=A �� � �����,>����� ��������2�� ���4@A �� � ����������������� ��������2�� ���� ��

������������� %���,������� �������� %��4

(�� ��� ������� ����� �� � ���� ����� � � +� ��� ������������ ������� � ��� ��� � ���� �� ������ ������������� ����� ������������� ����� ����+ %��� ������������

Page 82: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��#7

����������������������� �������������������

��

��

��

����

����� �������

����

��

��

��

����� �������

����

����

��

��

��

����� �������

����

����

2�1 ��������,��$���7�#������/��������2.����2����64�

/�5" G���� � ��� ����� ���/�5� @� ���������������� ��D

���� ����������������/�5# @� ���������������� ��D

���� ����������������/�53 ��������� ��� � ��� ��D�� �� �����������

��� ���� �� �� �� �������� ��� �� �� ��D�� �������

�������� ��������������/�56 @� �������� ��� ���������/�57 )� ��������� ��� ���������/#56 @� �������� �B� ��������/#57 )� ��������� �B� ��������/35" @� ��� ����� �������� ��

,�� ������������� ���4/35� @� ��� ����� ������������ ��/356 @� �������� ����������/357 )� ��������� ����������/5*" @� ��� ����� ��������/5*� @� ��� ����� ���������(G= M�@� ��� ����� ����������� ���������+

���� ������������������������������������� ������������������M�@� ��� ����� �����������������= ���������������������� ��

�(G�)����� ��������������������������� ����������������� ���������� ��

�(G�)>@��(���� ������������ ��������������������������������������������� ����� �����

�(G�)>" /35"&�A�+�A

�+�A

����������

/35�&�A�+�A

����������

?@� (���� ���������������������/35�&�����A

����

�A

/35"&�����A�� ��D��A

�����A

?@�>A' )��� ������,�����/854?@�>A= =�� ����������,�����/8*4

���� �������������� � ��� ��� �� ������ ��� �� � ��������� ������������� ��������� ������ ���������� ������������������������������ ������������������������ ������������������������������������� �������������+����� �+���������������� ����

���� � ��� ����� ������ ������������������ � %�����5� �� ���� ������&M �� ������������������� ������,A

4

M ���������,A�+A

�+A

�4

M ���������,A�4

����������A+�A

�+� ���A

�� �� �� ���������������

���������A������A

��� ������������� ��������������

� �������������������

@� ��� ����� ������ ���������������������������A

��,����������� ������ ��� ����������������

�������������4�

� �������� ������������/"D/�� � �� ��� ���� ����� ��� ��� ���� ����� �� ���� �� � ��������� ���������/"D/������������������������ ���������

Page 83: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��#8

����������������������� �������������������

�� �� �� �� �� �

��

�� ���

��

������� ���

����������

��

��

��

��

��

��

��

��

��

��

���� ����

R��S�A��K�+�L>�#"R��S�A!�K�+�L>6

��"��/8"��/"��0"��9"��13"���������#"��0�"�3"��/5���/�56��(G�)>3���(G=>�3��1>"��?�"""�5"��/���05"��92�"�*"��/���0*"�������3"D5"�� �������������������&���3"��/5���/�56���(G�)>3���(G=>�3��05"��92�"1N��?�"""

#��3"��/5���/�56���(G�)>3���(G=>�3��?�"""�5"��/���05"��92�"��1N

����������� ����� ��������������������������������

0������������� ��� �� ��3��� '������������������ ������������ � ��� ����� ����������������� ��������������� �������������

���������� ������� ����&/5�� ��� ��2� � ���������������/5#� ��� ��2� � ���������������

��'������������'������������� �����������������(!",- ��!",#+������ ��������� � ������A

����A

�������������

������� �Q�������������

(��������� ���+� ���������������������������� ��� ��� ��������� ����������/�6����/�8+� �������� ��� ���� �����?=@'$����� ���������������� �����

�����������

�� �����������������������

�� ����������������

� �����������

� ����������������������������

Page 84: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��3"

����������������������� �������������������

��������!��������" #���$ "%

����� � ���������� ����������N='� ������� ��� �����,�� ��4������� ��+���������� ���������������������������������

����� � ������ �� �� ���� ����� FN��� ���� ����� ����� ������������������� �� ��,/5*"4��� �� �����,/5*�4�

�� ���������� ��� ������� ����������������

���

����

���

���

����

����

���

����

���

���

����

��������

2��� �� ���� '��������.��38.�$

�N='& ���� ����� � ����� �� ����� ��� �� ��� ��� ����������� �������(�������� ��D������������������������� ��������������������� �����������D�� ��������������������� �������� ��� ����������� ���

FN��& ���������� ����� �������������������� ���� ����������/5*"D5*��

Page 85: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��3�

����������������������� �������������������

���������

�������� �� �������� ������������ ������'�@))�,G���:'�� ������������'�@)):4

������� ��������� �����������&

������,A ������+�A �����#+����4

(�������� ���������� ��������������������������������������� ���������� �������������������

(������� ��2������������������������� ����� ������������������,��� ��������4���������������B��������� ����������������+����� ������ ������ �������������������������� � ����� ��� ���� ������+� ��� ���� � ��� ������� ������ ����������� ���

$% ���&

@���������������������� ���������9�)$�7���@�� �������� ���� ������������� �� ,����� ����� ��� �� ��� ��� ����������������4���������������������*�������+��� �����������-�������

�9�)$7��,*+"++2�*4

�9�)$�7� � �������+���������* ���������������� =�� ������� ���*����� ��-�������

,>������������ ��4" ���������������� =��������� ��� ��-����� ��++ ���������������� <��� ���� � ����� ���� ���� ������ ��

�� ������?���� �������������������� ��������%�� �����������������������+ �� ������� ������ ��������

2�* ������������� $�������� �������4 ����������������� ���� ������A=� ��� ���� ����� ����

G�������������� ������������+��� ������� ������ ���������� ��

��������)�������������

���� ������ ���������� �� ��� ����� � �� ��� � ������� ����������������� �������� �����?�����������������% �������������������� �����

(�� ���� �� ��� � ���� ���� ������� �� � ���� ��� ���� ����������+��� ���� �������������� ����� ������������ �� ������������������� ����������������

$% ���&

�9�)$�7#�� ������� ��� ����� ���9�)$�7�+����� �����!���.���� ������9�)$�73�� �����������*� �����������9�)$ 7�+���� �����!�2��#� �� ������9�)$�75�� ������ ������2*�������9�)$ 7�+���� �����!�������9�)$�7#� ������� �����6�2��# �� ����+������

Page 86: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��3#

����������������������� �������������������

!������� �����

������� ����� ����� ���� ��������� ����� ������ ������� ��������� ��������������� ��������� ����������� ���������� ����� ������������ ���� �����!�������" #��� ���������$ #��� ����������% #��� ����������� #��� ����������& #��� ��"'��� � �����(�����������)�*++'��� �� ��������(�����������)�*++�������� +� ����������

�,++,-.��/�+01

Page 87: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��33

����������������������� �������������������

�8��!&��������#��� ��#�8��!&��������#����� �*���#

A� ������������������������������������ ����� ������������������

���������������������� �����������������������AD�A=� ����� ��������� ��������

�9�)$7#� ������ ��������������.� �������������

�9�)$7��,=�A+=?A+G�(G+�A+�A=4�9�)$7#�,=�A+=?A+G�(G+�A+�A=+��.4

=�A �� ������� ��� ������� ��$ �������� ��@��������������������������� ��������������������=�A����������������� �������������� ���

=?A ��������� ��� ������� ����������� ��<������������������������ ��+������������������������������������������������ ���,=?A>"4

G�(G � ��������� ���������������� 0 �������0� ������������� ���������� ��������������G�(G�� ����������� ��� ��������� �������������������

�A ��������� ������� ���������������������+��� ��������������������������������

�A= ����������� �� �������������� �� ��������� �� �����������������+��� �������������������� ��+��������������

$������A����A=�� ������� ������(���� �������������� ������ ��� ����+��A=��������� ����

��. ����������� ����������������K�L ������$���� ��9�������������� �� ��������� ���� ������� ����������� �����������������,�����9�)$7#4�

����

������ ����

����

���

��

���

���

Page 88: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��35

����������������������� �������������������

� �����)���:#

=������ ��� ������� ������������������������������������������ #=��������� ��� ������� ������������������������������������ "G ��������� �������������������������������������������������������� �?�� ��������������� ������� ������������������������������ 2�"��������� ��������������������������������������������������������� "�����������,����������7#4 ������������������������������������ "

/*5�=@�G�1#"������'!G�*""�'3�?�#"/"�0#"�9#"�1#�����7��,#+�"+��+�2�"+�"4/"�15"'3"

��

��

��

Page 89: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��3*

����������������������� �������������������

�8��!&�����,���$�����#

�9�)$73�,=�A+=?A+G�(G+�A+�A=+?�$A+?�A=+�@'+��.+��G+?=?+T@=(+@0�+'�$A+T=�+���+�(G�4

A ����� ������� ����������7#&

?�$A ����������������� ������� ����������?�A= ������������������� �� � �������������� �� ��@' ���������� ����� ����������2�������G ���������������������������K�L ������$���� ���������0� �?=? ��������������� ����������������� ���������������� ���T@=( � �������� � �� 52�� ��@0���� ����� %�� 2;��'�$A����'������������������� ������������������T=���� T � ��������� �� 5 � ������$��� �������� ����������� ����� �������������� ������$����(G���� )� ������ ��� ��0� ���

?�������&�������������������������B���������� �������������� �������� ����������������� ��������� �������������������� ������������ ������������ ��������� ������ 2� ������� %����� ���� � �� ������������2�������������� ���������������� �����@���� � ��� �������� ����� ���� ����� � �� ��� ������� ��������������������� ��J� ��������� ������������� �������� ������� ������������� ���������������� �����

?�$A���������������������������������� ������������������-��������

?�A=���������������������������������� ������������������� ��+��������������

�@'G� ����� ���� ���� ����� �������� ����� � ��� ��� ������������������������������������� ���������� ����@'�

��.��������������� ��������� ���������������,������ ����4����� ������������������� ����������������� �����������.�<�"��$�������� ����������.�>�"��$��������������

��G��������� ��� �� ����� ����� ��� ������� ������������� �� � ��� ��������������������G�

Page 90: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��3!

����������������������� �������������������

?=?����������� ����?=?������� ����������� �����������������������������+�������������&�"+""��2���

T@=(T@=(>"�2������� ����@����� ��������������������� ����������������� ����������T@=(>��2�������� �@����� ��������������������� ������������������������������������ �������������������������������������

@0�G��������������������� %��&1>3

'�$A?�� �������� ������ � ���� ������ �� �� � ���� ��� ���+� ����������������������� ���������������(�� � ��� ���� � ���� ������������ ������ ��� ������ �����������������������+������� ���������������������� ���������������������������-�����������������������������

T=�=����� ��� ������ ���� �� ������ ����� T=�>", ����������� ����4��������������� ������������� ���

������� ������ ����� �� ���� ��� �� �������� ����� � �� �������������������������� �������������>�"��$������������������<�"��$�������� ������������>�"������������� ���� ������������.�(G����� �� ������ ���� �������� ����� � ��� ����� ��������� ������� �����,���T@=(>�4��(G��>�"��A����������� �������� ����� ����(G��>�"��@���� ����� ���� ����

A� ������������������������������������ ����� ������������������,0>"4�

���� ����� ������ ����� �� ����� ����� ��� ���� ������������ ����� ?�$AD?�A=+� �� ���� ��� ��+� ��%���������������������������������������������� ������@'�

��

��

����������������

���

��������

������

��

��

����

��������

��

��

Page 91: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��36

����������������������� �������������������

� �����)���:"

=������ ��� ������� ������������������������������������������ #=��������� ��� ������� ������������������������������������ "G ��������� �������������������������������������������������������� �?�� ��������������� ������� ������������������������������ 2�"��������� ������������������������������������������������������������ "?����������������� ������� ��������������������������������� 2*?������������������� �� � ������������������������������������ "��������� ����������������������������������������������������������� *����������������������������������������������������������������������� "����������������������������������������������������������������������� "?��� ���� ��� ����������������������������������������������������� �' ����������� ����������������������������������������������������� "����� %�� ��������������������������������������������������������� 3'������������������� ����������������������������������������� �T � ��������� �� ��������������������������������������������� "����������� ����� �������������� ��������������������������� ")� ������ ��� ������������������������������������������������������� "

���

��

��

/*5�=@�G�1#"�#����'!G#"""�'3�?�*"/"�0#"�9#"�1#�����73�,#+�"+��+�2�"+�"+�2*+�"+�*+�"+�"+��+�"+3+�+"+"+"4/"�15"'3"

Page 92: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��37

����������������������� �������������������

�8��!&��.�#�$� ����#

�9�)$75�,=�A+=?A+G�(G+�A+�A=+��.+G�@�+'A(�+A(�+ANGG+GG�+GG��+@0�+A�@.+�$�<+T@=(+�@'+T=�4

A ����� ������� ����������7�&

G�@� ���������������� ������������� 0���������������2���������3&�����+�5&�����+�*&�����������

'A(� ��� ������� ������� �� ��� ����� ����$����� �������������� ���������� �+� ���� ����3�,'34�2�57�,'574�

A(� ��� ������������ ��$��T ���� ����"+""��2�#"""����

,������������������� �������������4

A�� ��������'A(����A(������� ��������� ����������� �� � ��

ANGG �������������������% ������ �.0���������0�����.�������������������������������������������������ANGG�

GG� ���������������� ��� 0������0�������$ ���

GG�� ����������������� ����� 0������0�������$ ���

@0���� ����� %��

G��������������������� %��&

1>3

A�@.��� $ �� ���������������� ����������A(�

"&���������������� ������� �����������������D�����

�&�����������

#&������������ ���������

3&�������������D� �������

�$�<�������������� ����������

C�(�G��(/(�&��% ������

"&��� ����� �������� �������� ��

�&�,/!"�4

#&�,/!"#4

3&�,/!"34

�$�G��(/(�&������������

"&��� ����� �������� �������� ��

�&������������������,??�N�4

#&���������������������,??�N??4

<C��=$�G��(/(�&� ����� ����

"&��� ����� �������� �������� ��

�&�Q��2�������� ����� ������������ %��

#&� ��� ����� ������������ %��

3&�������� ����� ������������ %��

�<NCG@��G�A)@�$&

"&� ��� ������������ ����� � ���,���'�@))4

�&��� �������������2������������ �����,���'�@))4

Page 93: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��38

����������������������� �������������������

�����

����

��

������

� �

� ���������<�����%

M A� ������������������������������������ ����� ������������������

M = ���� �������� ��������� ����

M N������������������ANGG�

M � �����������������A������������������GG�+��������� ����� �������� ����������-���

M ����������� �����������

M G����������������� ����

M =�� ���������� ��������� ��������������������GG���

M = ����� ����������� ������� ���=�A�

M $�� �����������������������������G�@��

T@=(��� ' ������������

"&�������������� ���

�&����2������ ��������������� ����

#&����2������ ���������������� �

�@'��� (������� ��������������

�������� �������������

T=���� T � ������ ������ ������������ ����

�������� �������������

Page 94: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��5"

����������������������� �������������������

� �����)���:,

=������ ��� ������� ������������������������������������������ *=��������� ��� ������� ������������������������������������ "G ��������� �������������������������������������������������������� #?�� ��������������� ������� ������������������������������ 2�*������������ �� � ������������������������������������������������ "����������������������������������������������������������������������� "�������������� ����� ���������������� ����������������� 3��� ���� �� ����� ����-� ���������������������������������� "��� ���� �� ��� ������������������������������������������������ �G������������� ���������������������������������������������������� "G��� ��������������������������������������������������������������� *""G��������� �� ���������������������������������������������� 7""����� %�� ��������������������������������������������������������������� 3$ �� ����������� ������������������������������������������� "����������� ���������� ����������������������������������������� "' ������������ ��������������������������������������������������� "(������� �������������� ������������������������������������� "T � ��������� �� ��������������������������������������������� "

��

��

��

������������������������� ��������� ��� �� ���������������������������

/*5�=@�G�1#"�5����'!/"�0#"�9#"�1*�����75� ,*+� "+� #+� 2�*+� "+� "+� 3+� "+� �+� "+� *""+� 7""+3+"+"+"+"+"4/"�15"'3"

Page 95: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��5�

����������������������� �������������������

�8��!&���+����#��� ,������� ����,��(

�9�)$75"�,=�A+=?A+G�(G+�A+�A=+��.+G�=+G�@�+$��+'A(�+A(�+@0�+A�@.+�$�<4

A ����� ������� ����������7�&

G�= ��������������������� ����� 0��������������������� �����"&� ���� ������ ���+�3&�����+�5&�����

G�@� ���������������� ������������� 0���������������2���������3&�����+�5&�����+�*&�����������

$�� ���������� ������"&�����������+��&������������������+����� �������������������������� �������������������

'A(� ��� ������� ������� �� ��� ����� ����$����� �������������� ���������� �+� ���� ����3�,'34�2�57�,'574�

A(� ��� ������������ ��$��T ���� ����"+""��2�#"""����

,������������������� �������������4

A�� ��������'A(����A(������� ��������� ����������� �� � ��

@0���� ����� %��

G��������������������� %��&

1>3

A�@.��� $ �� ��������������� ����������A(�

"&���������������� ������� �����������������D�����

�&�����������

#&������������ ���������

3&�������������D� �������

�$�<�������������� ����������

C�(�G��(/(�&��% ������

"&��� ����� �������� �������� ��

�&�,/!"�4

#&�,/!"#4

3&�,/!"34

�$�G��(/(�&������������

"&��� ����� �������� �������� ��

�&������������������,??�N�4

#&���������������������,??�N??4

<C��=$�G��(/(�&�� ��� ��� ���������

"&���������� ���� ����

�&������� ���� ����

Page 96: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��5#

����������������������� �������������������

� �����)���:,-

=������ ��� ������� ������������������������������������������ *=��������� ��� ������� ������������������������������������ "G ��������� �������������������������������������������������������� #?�� ��������������� ������� ������������������������������ 2�*������������ �� � ����������������������������������������������� "����������������������������������������������������������������������� "�������������� ���������� ����� ������������������������� 5�������������� ����� ���������������� ����������������� 3' ����������� ����������������������������������������������������� "��� ���� �� ����� ����-� ���������������������������������� "��� ���� �� �� ������������������������������������������ �+#*����� %�� ��������������������������������������������������������� 3$ �� ����������� ������������������������������������������� "����������� ���������� ����������������������������������������� "

��

��

��� ���������<�����%

M A� ������������������������������������ ����� ������������������

M = ���� �������� ��������� ����

M � �����������������A�������� ����������������

M ����������� �����������

M �� ����������������������� ��������G�=�

M =�� ���������� ��������� ���

M = ����� ����������� ������� ���=�A�

M $�� �����������������������������G�@��

�����

��

���

��

������

���

� �

/*5�=@�G�1#"�5���G!""�'3/"�0#"�9#"�1#�����75"�,*+�"+�#+�2�*+�"+�"+�5+�3+�"+�"+���#*+3+"+"4/"�15"'3"

Page 97: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��53

����������������������� �������������������

�8��!&)�9���#�����8��!&��9���#�)

�9�)$7*�,=�A+=?A+G�(G+�A+�A=+��.+??=+=??4�9�)$78�,=�A+=?A+G�(G+�A+�A=+��.4

.������� ���*���������� ��9�)$7#�

���������������9�)$7#&

M ���������������� ��������������� ����� �����?� ������������������ ��������� �����??=��������������� ���

M ������ ������������������ ���������������������� ���������� �����=??�������������� ���

??= ������������ �� ��� �������� ��=?? �� ����������� �� ��� ����������

Page 98: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��55

����������������������� �������������������

�8��!& �9���#��

��������������� ������������������������������������������������� �������������

������������� ������������� ������ ����������� ������������������������������������������������� ��

�9�)$7!�,=�A+=?A+G�(G+�A+�A=+��.+G�(=+=A@+=AN+=A@A+ANGG4

.�����#����������� ��9�)$7#�N���� ��������� ���������� �������

���������������9�)$7#&

M ������ ���� ���������������� �����������������������G�(=�M @��������������������� ���������������������,ANGG4� ��������������� ��� �

��������������������� ��������=A@+�=AN+�=A@A����0D9D1���� ������ ������������� ����������� ������

G�(= ��������������� 0���������������3&�����+�5&�����

=A@ ����������� ���������0 ��� ���������������2������ �������� �����������

=AN ����������� ���������9 ��� ���������������.��� ���������� �����������

=A@A ����������� ���������1 ��� ���������������2���� ���������� �����������

ANGG �������������������% ������ �.0���������0�����

���

��

���

�������

Page 99: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��5*

����������������������� �������������������

�8��!&%�9���#���9�)$76�,=�A+=?A+G�(G+�A+�A=+G�(=4

�@C�(N�&�.������������ ������'"� ������������+=�� �������������� ��������������G� ������������������� �����

�=�/�::9����,

�9�)$76�,=�A+=?A+G�(G+�A+�A=+��.+G�(=4

�@C�(N�&�.��������������������� ����� ������'"� ������������+=�� �������������� ��������������G� ������������������� �����

Page 100: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��5!

����������������������� �������������������

.����1�,���:;�!2����������1�,���:;�!2�

�������������������������������������������������������� � �������� ������2��2���+� ��� ��� ����������������������������������������������%��������� ��� ��� ����� ����� ����� ��������������B������������������������������� � ����� ��2�����-���

��� �����

�� '�� ��� �����������B�������������������� �!" '�@)) �9�)$7��,����4#� A�� ���������� ���� �!* <N)$G�,����43� ������������ ��������� �� �6" '�@))

�����������./�0#<N)$G��,GA�@+GA�N+G�@�+?�(G+�.<+�C'4GA�@ �� ����������0 0� �����������������2������ GA�N �� ����������9 0� �����������������.��� ��G�@� �������������������������� �������0?�(G ���� ������ �������2���������� �������0� ���

�������� ���������������.< ���� ����������������� ���� ����9������������

�������� ���������������C' �������������� �1���

�������������./�0&<N)$G#�,�A@+�AN+=@�+G�@�+(��@+�C'4�A@ ��������������0 ������������2������ �AN ��������������9 ������������.��� ��=@� ���������������������� �2����G�@� �� ����� ������� �������0(��@ ����%���� ���� ����%����2����

�����(��@>"+��������������������� ������ �������������������������C' �������������� �1���

����

��

���

��

����

���� �

���

���

����

� �

����

���

Page 101: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��56

����������������������� �������������������

� ���������#

/*5�=@�G�15"������'!G�"""�'3�?#""/"�0"�9"�1*"'7'�@))������7��,�"+�"+�#+�2�#+�"4<������,#"+�25"+��*+�"+�3"+�54'�@))'8�/"�1*"'3"

��

����

��

��

��

=������������+� ������ ���������������������������������� #"=����������������� �� ����������������������������������� 25"@�������� ������ ���������������������������������������������� �*I���� ��������������������������������� ����������� "���� ����������������� ������������������������������������� 3"�������������� ��������������������������������������������������� 5

Page 102: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��57

����������������������� �������������������

� ���������&

����������� ��-��� ���������������������������������������� #*��������������� �� ����������������������������������������� #*= ������������������ ������������������������������������������� �*(���� �� ���� ������������������������������������������������������ 5*I(���%���� ���� ��������������������������������������������������� 8"I�������������� ��������������������������������������������������� 5

���

���

���

��

��

/*5�=@�G�1#"������'!G�#""�'3�?�5"/"�0#*�9#*�1�"'�@))������73,#+�"+��+�2�"+�"+�2*+�"+�*+�"+�"+��+�"+�3+#+�"+�"+�"4<����#,#*+�#*+��*+�5*+�8"+�54'�@))/"�1*"'3"

Page 103: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��58

����������������������� �������������������

������� ���8��!&���<�

������������� ��������� ����������� ��������������������������������������� �������� ���������������������������

��� �����

�� � ��������B������������������������ ��� �!" '�@)) �9�)$7��,����4#� A�� ����������� ���� �!* �9�)$7"�,����43� ���������������� ��� �� �6" '�@))

�9�)$7"��,GA�@+GA�N+G�@�+�(G�+�(G#+�C'�+�C'#4

@������� �� ���������<N)$G�&

G�@� @�������� ���02 %���(G� ���� ������������������������,�������� �������������4�(G# ���� ����������������������,�������� �������������4�C'� �����������������C'# ��������������

�(G#�(G�

G�@

GA�@

GA�N

3" �"

#"

�*

� �����)���:-#

/*5�=@�G�1#"������'!G�#""�'3�?�5"/"�0"�9"�1*"'7'�@))������7�,�"+�"+�#+�2�#+�"4�����7"�,3"+�#"+�"+��"+��*+�*+�34'�@))'8�/"�1*"'3"

=������������� �������,���04 ��������������������������� 3"=����������������� ���,���94 �������������������������� #"@�������������� ���� ������������������������������������������ "I���� ������������������� �������������������������������� �"���� ����������������� �������������������������������������� �*���������������� ���������������������������������������������� *�������������� ���������������������������������������������������� 3

Page 104: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��*"

����������������������� �������������������

Page 105: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��*�

����������������������� �������������������

������� �����

������� ����� �� ���������� ��������� �� ���������� ����������� ���������� ���������������� ��������� ������������ ���������� � ������������������ ������������ ������������� � ������� ������������! ������������ ������������" � ������� ������������# ������������������ �� ���������� � ������������� �� ��

$%��%&'��(��)�

Page 106: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��*#

����������������������� �������������������

�8��!%��6��������#

�9�)$6��,=�A+=?A+G�(G+�A+A@+AN+)$�/+�(�+G�@+'(�+'(�@+?�A+?@)�+??A�+T@=(4

=�A =�� ������� ���, �������4 ��$ �������� ��@������������������������� ���� ���������������=�A����������������� ��������������� ���

=?A =��������� ���, �������4 ����������� ��<������������������������ ��+���������� ����������������-���������������������� ���,=?A>"4

G�(G G �������� ���������������� 0 �������0� �������������� ������ ��������������������������G�(G� ������������������ ��� ���������� �������������������

�A �����, �������4 �����A@ G� ���������+� ����� �, �������4 ������2����� AN G� ���������+����� ���, �������4 ������.��� ��)$�/ =��� ������������ ������������� %�� /��!���

���� �������������������������������� �����������������������������(� =��� ������������ ���������#��� %�� >����

���� �������������������������������� ����������������������������G�@ @��������������������������� �� %������������� ����� ����������� %���������

� ���,����� ������ �������������4T ���� ���&�"I��SG�@�U��7"I

'(� ' %�����������������,�����������������4�� %�� �������������'(�@ ' %������������������ ���������� ������������ ��

,�����������������4 � %�� ��������������2?�A =�� ������� ����������� ���,�������� �+������������������4?@)� ?�� ��� �������� ���� ������������,�������� �+������������������4

(��� ���������������������?@)���� ���������������� ��� ��� �������� � � ����������2���� ��������

??A� ?��� ��������� ���� ������� ���������� ��T@=( �������� ������� 52�� ��

C�(�G��(/(�T ���& �������� ��������� ��� �������� ���� ���

#����?���������$�G��(/(�T ���& ����� ������������ ������ +����������������

#���� ���������������� ��+����������������3���� ������������ ������ +�������� ��������������5���� ���������������� ��+�������� ��������������

����

���

���

���

Page 107: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��*3

����������������������� �������������������

� �����)���?#

=������ ��� ������� ���������������������������������������� �"=��������� ��� ������� ������������������������������������ "G ��������� �������������������������������������������������������� #����� ������ ������������������������������������������������������ 2!(���� ������� ��-��� ��������������������������������������������� "(���� ����������� �� ���������������������������������������������� ")������������ ����+� ��-��� ���������������������������� !")������������ ����+����� �� ����������������������������� 5"@����������������������� �� %��� ��� ��-��� ��� �"' %����������������������������������������������������� #' %�� ��������������+����� ��������������������������������� �"=�� ������ ����������� �� ��������������������������������� *?�� ��� ������� ���������������������������������������������������� "?��� ��������� ���� ������� ����������������������� 5""' ����������� ��������������������������������������������������� 3�N ���� ������������������� ��������� ������������� #

/*5�=@�G�1#"�!����'!G#*""�'3�?5""/"�0"�9"�1#"�9�)$� 6�� ,�"+"+#+2!+"+"+!"+5"+�"+#+�"+*+"+5""+3�+#4/"�15"'3"

��������%����� ������ �9�)$6�+� ���� � �� � ��� ����� ����� ���� ���� ����������������������� ������������������� ,� �������� ���� ��� ��� ��� �� � �� ������������������������ ���� ���4� �������������,������������������ ��� ����������4��' %����� �������� ��������������������� ����������������������������������� ��������������� ��������������������������������������

����

���

����

���

����

���

����

���

Page 108: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��*5

����������������������� �������������������

�8��!%���� ���������#

�9�)$6#�,F�@'$+�=�A+�=?A+�G�(G+��A+�'(�+�?@)+�?@)�+�??A�+�??�+�T@=(+=)+@G�+�)A�+�??3+�@G#+�)A#4

A ����� ������� ����������7�&

F�@'$ � ������������������������������������������������������������� �������� �������������������� �����F�@'$������ �������������� ��������������������������

?@) ?�� ��� �������� ���� ���� ������������������,�����������������4

??� ?��� ������������������,�����������������4

=) ?����������������������������������������������������/5"+�/5����/5#T ���& 5" ����/5"�, � ��� ����� ������������� 4

5� ����/5�5# ����/5#

)A�D)A# )�����+� ����)A�&�)��������� � ���� ���, ����� ��� ���������4��� ���������������������� ���������� �� ����, ����� ������4)A#&�)��������������� ���, ����� ��� ���������4��� ���������������������� ���������� �� ����, ����� ������4����� ��������������� �����V"�

C�(�G��(/(�&

T ���& � ���� G� ������ ������ ������# ���� G���2������3 ����W� � ��

�$�G�C�(�&

T ���& " @� ������������������������ ��

� @� ������������������� ������ �� ��

����������������� ������������ �

??3�=��������� ��� ������� �������������� ���������������������������� ��(�� ��� ���� ��� ��� �� ����+� ���� �������� ���������� ��� ���������������� ���������� ����/"��

@G�D@G# G������ �������� � ��D�� ������� ��

@G�&� � ������� ��X�@G#&��� ������� ��(��@G#���������� ����+�������� ��������� ������������� �������� �������� � ���

Page 109: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��**

����������������������� �������������������

� �����)���?&

� ������������������������������������������������������������F�����=������ ��� ������� ������������������������������������������ #=��������� ��� ������� ������������������������������������ "G ��������� �������������������������������������������������������� ������ ������� ���������������������������������������������������� 25(���������� ��������������������������������������������������������� 5?�� ��� ������� ���������������������������������������������������� "?�� ��� ������� ���������������������������������������������������� "?��� ������ �� ���������������������������������������������� #*"?��� ������� ������������������������������������������������� �""' ����������� ��������������������������������������������������� ��' ����������� ��������������������������������������������������� 5�@� ��� �� ������������������������������������������������������ #)�����+� ���� ������������������������������������������������������ *=�� ���������� ����������������������������������������������������� "=�� ��� �� ��������������������������������������������������������� #)�����+� ���� ������������������������������������������������������ *

/*5�=@�G�1#"������'!��,?Y���Z�!4G#*""�?5""�'3�����6#� ����������� ������� � ��� � �������� ������ ��� ��

G���� ���:F�����:

/��0*"�955085�=��'>!9!0!9550*"�=��'>"'�6

��

���

Page 110: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��*!

����������������������� �������������������

�8��!����+,��$��� �#

�9�)$8" ,=�A+=?A+G�(G+�A+�A=+�(@�<+F�(@'+A(�+??=+��(=+�9�<+�A@+�AN4

=�A �� ������� ��� ������� ��$ �������� ��=?A ��������� ��� ������� ����������� ��G�(G � ��������� ���������������� 0 �������0� ���

�����9�)$7��

�A ��� ��������� ������� �����)������������ �+��� ���������������-��������

�A= ��� ����������� �� �������������� �� ��������� �� �)������������ �+��� ���������������� ��+��������������

$������A����A=�� ������� ������(���� �������������� ����� ��� ����+����� ������A=��������� ����

�(@�< ����� ����� ���� ���� ��2��������$�� �N��������� ������������� �� ����%��� ����� ��

F�(@' ����D���������� ���� 8�������2����(���� ����� �&������������� ����$%��� ����� �&���� �������� ����

A(� ��� ������ ��$��

??= ����� ����������� �� �� ��� �������� ��

��(= ���������������� �����������������#&�/#�,���������4 3&�/3�,���������������4

�9A�< ���������� � $=������$�� �"&������ ����� � �&��%��� ����� �(���� ����� �& �� ���������������� �������@�[���������&�� ���������� ����(=>#&�0V�A@+�9V�AN

�� ���������� ����(=>3&�0V�A@+�9U�AN

�A@ ��������������0 ������������2������ �AN ��������������9 ������������.��� ��

����

��

���

���

��

������

������

���������������� ���������������������� ������

Page 111: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��*6

����������������������� �������������������

� �����)���4-

=������ ��� ������� ������������������������������������������ �=��������� ��� ������� ������������������������������������ "G ��������� �������������������������������������������������������� ���� ������� ������ ���������������������������������������� 2#*��������� ������������������������������������������������������������ "����� ���� ���� ����������������������������������������������� 3!�������� ������������������������������������������������������ 35+37��� ���� � ������������������������������������������������������� ��*?��� �� ����������������������������������������������������������� 5""'��������������� ���������������������������������������������������� #��� ������">����������>������� ������������������������� "����������+� ��-��� ��������������������������������������� *"����������+����� �� ���������������������������������������� *"

/*5�=@�G��1#"������'!G#*""�'3/"�0*"�9*"�1#�����8"���� ��������� �� ������������������� ���� ��� �� �� ��� �� ��� ��

��

��

���

����

�����

Page 112: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��*7

����������������������� �������������������

����=���#,����2�� ������#

M ��������� ����������� ��������������������������� � ��������

M �����������������������������,������������ ��������� ����4�

����G�������������� ��������������������������� �������

��� ������ ������������� �������

A�� ����������������������������������������� ����&�C'>�+�=@�>"+�(��@>"?��� ������������������� ��� ������������������ �����

$% ���&

)N�/<N)$ ,=�A+�=?A+�G�(G+��A+��C'>�+�)$�/+��A@>�"+��AN>3"+=@�>"+�G�@�>"+�(��@>"+�??�+�??A�+�'(�4

)N�/<N)$ ,=�A+�=?A+�G�(G+��A+��C'>�+�)$�/+��A@>�"+��AN>*"+=@�>"+�G�@�>"+�(��@>"+�??�+�??A�+�'(�4

)N�/<N)$ ,=�A+�=?A+�G�(G+��A+��C'>�+�)$�/+��A@>*"+��AN>*"+=@�>"+�G�@�>"+�(��@>"+�??�+�??A�+�'(�4

)N�/<N)$ ,=�A+�=?A+�G�(G+��A+��C'>�+�)$�/+��A@>*"+��AN>3"+=@�>"+�G�@�>"+�(��@>"+�??�+�??A�+�'(�4

�����

����

Page 113: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��*8

����������������������� �������������������

��#,���������������;>�:;�!

)N�/<N)$ ,=�A+=?A+G�(G+�A+�A=+�C'+)$�/+�A@+�AN+=@�+G�@�+(��@+??�+??A�+'(�4

�������������������� ����������������������� � ���������� �������� �������� ����������������������� ��������)��������������>�������� �����������B����������������������������������� � ����� ��2�����-���

=�A �� ������� ��� ������� ��$ �������� ��@������������������������������� ��������������

=?A ��������� ��� ������� ����������� ��<�������������������� ��+���� ����=?A>"�

G�(G � ��������� ���������������� 0 �������0� ���= ���� ����������G�(G�� ����������� ��+������������������� ��

�A �������������� ������� �������������������������+��� �������������������-��������

�A= ���������������� �� �������������� �� ��������� �� ���������������������+��� �������������������� ��+��������������$������A����A=�� ������� �����

�C' ������������������ �1���)$�/ ������������������ /��!���A@ ��������������0 ������������2������ �AN ��������������9 ������������.��� ��=@� ���������������������� �2����G�@� �� ����� ������� �������0(��@ ����%���� ���� ����%����2����

�����(��@>"������������������������� ������ ����������������??� ����� ����������������� ������������??A� ����� ��������� ���� ������� ���������� ��'(� � %��������������������������� � %����������������

������������

���

���

������

��

���

�����

����

����

��

Page 114: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��!"

����������������������� �������������������

� ����/�������

=������ ��� ������� ������������������������������������������ #=��������� ��� ������� ������������������������������������ "G ��������� �������������������������������������������������������� �$���� �������� ���������������������������������������������������� 2!��������� ������������������������������������������������������������ "�������������� ��������� ���������������������������������� 3<���������� ��������������������������������������������������������� 3"����������+� ��-��� ��������������������������������������� *"����������+����� �� ���������������������������������������� *"= ������������� �������������������������������������������������� �"(���� �� ���� ����������������������������������������������������������� "(������� �� ��������������������������������������������������� 5*?��� ������� ��������������������������������������������������� 7"?��� ������ �� ���������������������������������������������� 3*"(������������������������ ���������������������������������� #

/*5�=@�G�1#"������'!G#*""�'3/"�0*"�9*"�1#)������������ �������� ������ ��� ��� �� �� ������� ���� ���� ��� ��

��

��

���

���

���

����

Page 115: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��!�

����������������������� �������������������

2�� ������������2�;+�������������� �2�;+�

G)N�� ,=�A+=?A+G�(G+�A+�A=+�C'+)$�/+�(�+�A@+�AN+=@�+G�@�+(��@+??�+??A�+'(�+��(=+?@)+T@=(+'(�?+??A#+GG?+?@)�+G�@#4

G)N�# ,=�A+=?A+G�(G+�A+�A=+�C'+@?G)+�(�+�A@+�AN+=@�+G�@�+(��@+??�+??A�+'(�+��(=+?@)+T@=(+'(�?+??A#+GG?4

����� ����� ��������� � ��� ����� �������� ��� � ����� ����� ��� ����� ��� ����� ������������������� �������������������������������� ����� ������������ ����� ������������� ����+����� %���������������������� �����������B������������������������������� � ����� ��2�����-���G)N������������ ����������� �� �������������������+�G)N�#�������� �2�� ��������������������������

A ����� ������� �����)N�/<N)$&

�(� ����������������������� >������(= ���������������� �����������������

#&�/#�,���������4 3&�/3�,���������������4?@) ����������������������������� ����������2���� ���T@=( � �������� � �� 52�� ���

C�(�G��(/(�&

"&��������� ������������������� �����������

�&�������������������������������#&�������������������������������������� ������������$�G��(/(�&

"&�A�������� ������/"

�&�A�������� ������/�

3&�N����� ����������/�

'(�? � %�������������������������� � %��������������������������������������

??A# ����������������� ���������� ��GG? ������������������������ 0������0�������������@?G) �������������������������������� 2��������0����/�����

��������G)N�#?@)���� ?��������� ���� ���� �����������������G�@#��� ' %������������� ������������� ������� �����

���

���

���

��

� ��

����

���

����

���

���

��

���

���

���

����

���������������������(���������������@?G)������� �������������%���� ��2���(��@������ ��+��� ����������� ������ ������ � ������+� ���� ������ ����� �� ����������� �� � ��

Page 116: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��!#

����������������������� �������������������

� ����0/.$#

=������ ��� ������� ������������������������������������������ #=��������� ��� ������� ������������������������������������ "G ��������� �������������������������������������������������������� �G��������� ������� ��������������������������������������������� 2!��������� ������������������������������������������������������������ "�������������� ���������������������������������������������������� 5G���������� ���������������������������������������������������������� 3"G��������������������������������������������������������������������� �"����������+� ��-��� ����������������������������������������� "����������+����� �� ������������������������������������������ "= ������������� �������������������������������������������������� �"(���� �� ���� ��������������������������������������������������������� 5*(������� �� ��������������������������������������������������� 8"?��� ������� ��������������������������������������������������� 7"?��� ������ �� ���������������������������������������������� 3*"(���������� ��������������������������������������������������������� #'��������������� ���������������������������������������������������� 3?�� ��� ������� ������������������������������������������������� "�#' ����������� ����������������������������������������������������� "

">���������>��������#>����������

' %������������������������������������������������� !?��� �������������������� �������������������������������� 5""G��������������������� ���������������������������������� 3*""?��������� ���� ���� ����������������� �������������� "�*' %����������������� ������������������������������������� *

/*5�=@�G�1#"������'!G#*""�'3/"�0*"�9*"�1#G�����,#+�"+��+�2!+�"+�5+�3"+��"+�*"+�*"+��"+�5*+�8"+

7"+�3*"+�#+�3+�"�#+�"+�!+�5""+�3*""+"�*+*4/"�1*"'3"

��

��

���

������

��

����

���

��

Page 117: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��!3

����������������������� �������������������

� ����0���&

=������ ��� ������� ������������������������������������������ #=��������� ��� ������� ������������������������������������ "G ������ �� ��������������������������������������������������������� ������������ ������������ ������� ��������������������� 2!����������� ���������������� ���������������������������� "�������������������� ������� ��������������������������� #@������������������� ������������������������������������������� 8"����������� ������������� ��������������������������������� �"����������+� ��-��� ��������������������������������������� *"����������+����� �� ���������������������������������������� *"= ������������� �������������������������������������������������� 3"(���� �� ���� ��������������������������������������������������������� 5*(������� �� ������������������������������������������������� �7"?��� ����������������� ����������������������������������� 7"?��� ��������� ���� ������� ����������������������� 3""' %����������������������������������������������������� #'��������������� ���������������������������������������������������� 3?�� ��� ������� ������������������������������������������������� "�#' ����������� ����������������������������������������������������� "

">���������>��������#>����������

' %������������������������������������������������� !?��� �������������������� �������������������������������� 5""G��������������������� ���������������������������������� 5"""

/*5�=@�G�1#"������'!G#*""�'3/"�0*"�9*"�1#G���#�,#+�"+��+�2!+�"+�#+�8"+��"+�*"+�*"+�3"+�5*+��7"+

7"+�3""+�#+�3+�"�#+�"+�!+�5""+�5"""4/"�1*"'3"

���

���

���

��

���

��

��

��

��

Page 118: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��!5

����������������������� �������������������

.� �#��������( ��;�?!+��������������( ��;�?!+�AN�F$�� ,=�A+=?A+G�(G+�A+�A=+)$�/+�(�+�=@�+�A@+�AN+G�@�+

??�+??A�+'(�+��(=+?@)+T@=(+'(�?+??A#+GG?4AN�F$�# ,=�A+=?A+G�(G+�A+�A=+A=@�+�A@+�AN+

??�+??A�+'(�+��(=+?@)+T@=(+'(�?+??A#+GG?4

���������� ���������� ��������������������������� ���� ���� ��������� ����� ���������� ��� ������������������������������������ ���A������������� ������������������ ����� ������������� ����+���������������� �������� � ��

=�A��� ������� ��+�=?A���������� ��+�G�(G � ��������� ���+��A+��A=��������������� ������������

A=@� ������� ����������������� ��������2����)$�/ �������������������������� /��!���(� ������������������������� >�����=@� ������ ����������������� ������2�����A@ ��������������0 ������������2������ �AN ��������������9 ������������.��� ��G�@� ������ ������� �������0??� ������������������� ������������??A� ����������� ���� ������� ���������� ��'(� � %������������������������ � %����������������

��������������(= � ���������������� �����������������

#&�/#�,���������4 3&�/3�,���������������4?@) ����������������������������� ����������2���� ���T@=( � �������� � �� 52�� ���

"& �������� ������������������� ������������& ������������������������������#& ������������������������������������� �����������

'(�? � %�������������������������� � %��������������������������������������

??A# ����������������� ���������� ��GG? ������������������������ 0������0�������������

���

���

�����

��

� ��

���

����

���

���

�����

���

Page 119: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��!*

����������������������� �������������������

� �������@��#

=������ ��� ������� ������������������������������������������ #=��������� ��� ������� ������������������������������������ "G ��������� �������������������������������������������������������� �A����������� ������������������������������������������������ 2!A��������������� ������������������������������������������������ "A������������ ����������������������������������������������������� !"A����������� ������������������������������������������������������� 3"����� ���� ������������������������������������������������������� *����������+� ��-��� ��������������������������������������� *"����������+����� �� ���������������������������������������� *"@������������� ��-��� � ������� �� ��������������� 3"?��� ����������������� ����������������������������������� 7"?��� ��������� ���� ������� ����������������������� 3""' %����������������������������������������������������� #'��������������� ���������������������������������������������������� 3?�� ��� �������� ���� ��� �������������������������������� "�#' ����������� ����������������������������������������������������� "

">����������>��������#>��������

' %������������������������������������������������� !?��� �������������������� �������������������������������� 5""G��������������������� ���������������������������������� 5"""

/*5�=@�G�1#"������'!/"�0*"�9*"�1#A��������,#+�"+��+�2!+�"+�!"+�3"+�*+�*"+�*"+�3"+�7"+�5""+

#+�3+�"�#+�"+�!+�5""+�5"""4/"�1*"'3"

��

��

���

���

���

��

��

��

Page 120: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��!!

����������������������� �������������������

� �������@��&

=������ ��� ������� ������������������������������������������ #=��������� ��� ������� ������������������������������������ "G ��������� �������������������������������������������������������� �A����������� ������������������������������������������������ 2!A��������������� ������������������������������������������������ "A������ ���� ����������������������������������������������������� #*����������+� ��-��� ��������������������������������������� *"����������+����� �� ���������������������������������������� *"?��� ����������������� ����������������������������������� 7"?��� ��������� ���� ������� ����������������������� 3""' %����������������������������������������������������� #'��������������� ���������������������������������������������������� 3?�� ��� �������� ���� ��� �������������������������������� "�#' ����������� ����������������������������������������������������� "

">����������>��������#>��������

' %������������������������������������������������� !?��� �������������������� �������������������������������� 5""G��������������������� ���������������������������������� 5"""

/*5�=@�G�1#"������'!/"�0*"�9*"�1#A������#�,#+�"+��+2!+�"+�#*+�*"+�*"+�7"+�3""+�#+

3+�"�#+�"+�!+�5""+�5"""/"�1*"'3"

��

��

���

���

���

Page 121: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��!6

����������������������� �������������������

.� �#��������( ������#��;�?!+��������������( ������#��;�?!+�

AN�F$�3 ,=�A+=?A+G�(G+�A+)$�/+�(�+�=@�+A@+AN+G�@+'(�+?@)+?@)�+??A�+??�+��(=+T@=(+'(�@+@A�+@A#+@�+=@��+�A�4

AN�F$�5 ,=�A+=?A+G�(G+�A+A=@�+A@+AN+'(�+?@)+?@)�+??A�+??�+��(=+T@=(+'(�@+@A�+@�+=@��+�A�4

�������������� ����� ���������������� �������������?��������������+� �� ���������������������������������������� �� ����� �� ����������������������� ���������� ���� �����������X������ ������������ ��������� ���������������������������@������������������������������� ������������������������ ������N�������������������� ������ ��� � � �����������

����������������.�8�$"����������.�8�$#%

M '����������������� ������������������ �/������������,/#D/34��� ����� �������������������������

M ?��������� �������+������ %�������������������������� �������� �� ����M ?��������� ���� �������������������������M �������������&

2� ���� ���� �����������������������2� ����������������� �� ��� ���������������������2������� ����� ������������������� �� %���

M G����� � ��� ��� ���������������������M ������� �������� ������������������������ ��� ��� �� ������-�� ������� ��

,��������������������2���������������������

���������������.�8�$,����������.�8�$&%

M '����������������� ������������������ �/������������,/#D/34��� ����� �������������������������

M ?��������� �������+������ %�������������������������� �������� �� ����M ?��������� ���� ������������������ ���M ����������������� ������� ������&

2� ���� ����������������������������2� ����� ��������� �� ��� ���������������������

M G����� � ��� ����������� ����������������M ������� �������� ����������������������� ��� ��� �� ������-�� ������� ��

,��������������������2��������������������4M '(�@����������� ���� ���������������� ��������

Page 122: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��!7

����������������������� �������������������

������������������AN�F$�3+�AN�F$�5

=�A+=?A+�A+G�(G+A=@�+)$�/+�(�+�=@�+??�+?@)+??A�+'(�+��(=+T@=(+'(�@+�G�@������ ��� ���������� ������������

��(= '���������������&�,�����������������4"&�� ������������, ����������� ����4�&����������������#&������/#�,�����������������������������43&������/3

T@=( �������� �������&�,�����������������4C�(���(/(��&�G������ �������������� ��� �������� ���� ���#&�?���������$�G��(/(�&"&�T���� ����������������������������/"�&�T���� ����������������������������/�#&�@����� �����%

A@ A��������������������0 ������2������ AN A��������������������9 ������.��� ��?@)� ?�� �� ���� ���� ��� �� ����������2���� ��������@A� . ������-��������������@A# . ������-�������������@� . ������-������������=@�� = �������������������� �� ������������A� (�������������� ������������������ ����� ����� ��������� �� ��

��

��

�����

����

���

����

��

��

�����

���

Page 123: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��!8

����������������������� �������������������

=������ ��� ������� ������������������������������������������ #=��������� ��� ������� ������������������������������������ "G ��������� �������������������������������������������������������� �A���������� ������������������������������������������������������� 2!A������������ ����������������������������������������������������� !"A����������� ������������������������������������������������������� 3"����� ���� ������������������������������������������������������� *=�������������,A�����������4+� ��-��� �������� *"=�������������,A�����������4+����� �� ��������� *"@����������������������� �� %��� ��� ��-��� ��� 3"' %����������������������������������������������������� #?�� ��� ������������ ���������������������������������������� "�#?�� ��� �������������� ������������������������������������� "��?��� ������ �� ���������������������������������������������� 3""?��� ������� ��������������������������������������������������� 7"'��������������� ���������������������������������������������������� 3

">���������-�����������>�� ��� ���������#>�/#3>�/3

' ����������� ��������������������������������������������������� #�C�(�G��(/(�

�&�=�������#&�?��������

�$�G��(/(�"&�/"�&�/�#&�<���%3&�N����� ����

' %����������������� ����������������������������������������� 6C���������������� ������������������������������������������������� "C��������������� ��������������������������������������������������� "C�������������� �������������������������������������������������� "= ����+� ���� ����������������������������������������������������� �"����������������� ����������������������������������������������� #

� �������@��"

/*5�=@�G�1#"�#����'!G3"""�'3/"�0*"�9*"�1#A������3�,#+�"+��+�2!+�!"+�3"+�*+�*"+�*"+�3"+�#+�"�#+

"��+�3""+�7"+�3+�#�+�6+��"+�#4/"�1*"'3"

��

��

���

���

���

��

��

��

Page 124: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��6"

����������������������� �������������������

=������ ��� ������� ������������������������������������������ #=��������� ��� ������� ������������������������������������ "G ��������� �������������������������������������������������������� �A����������� ������������������������������������������������ 2!A������ ���� ����������������������������������������������������� #*A����������������+� ��-��� ������������������������������ "A����������������+����� �� ������������������������������� "' %����������������������������������������������������� 3?�� ��� ������������ ���������������������������������������� "�#?�� ��� �������������� ������������������������������������� "��?��� ������ �� ���������������������������������������������� 5""?��� ������� ��������������������������������������������������� 7"'��������������� ���������������������������������������������������� 3

">���������-�����������>�� ��� ���������#>�/#3>�/3

' ����������� ��������������������������������������������������� #�C�(�G��(/(�

�&�=�������#&�?��������

�$�G��(/(�"&�/"�&�/�#&�<���%3&�N����� ����

' %����������������� ����������������������������������������� 6C����������� �� �������������������������������������������������� "C�������������� �������������������������������������������������� "= ��������������������������%� �� ������������������ �"����������������� ����������������������������������������������� 3

� �������@��,

/*5�=@�G�0*"�9*"�1#"�#����'!G3"""�'3/"�0"�9"�1#A������5�,#+�"+��+�2!+�#*+�"+�"+�3+�"�#+�"��+�5""+

7"+�3+�#�+�6+�"+�"+��"+�34/"�1*"'3"

��

��

���

���

��

Page 125: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��6�

����������������������� �������������������

.� �#������ �$������#��8��!% �<������������ �$������#��8��!%%�<�

�9�)$6! ,=�A+=?A+G�(G+�A+�A=+)$�/+�(�+�=@�+A@+AN+G�@+'(�+?@)+?@)�+??A�+??�+��(=+T@=(+@A�+@A#4

�9�)$66 ,=�A+=?A+G�(G+�A+�A=+A=@�+A@+AN+'(�+?@)+?@)�+??A�+??�+��(=+T@=(+@A�4

�������������� ��������������������� �������������?������������ �� ������������������ ���������������������� �� ���� ����������������������������� � ������������������� ���������� �� ��

.������ ���������������+������ ����� ��� ��� ����������������N�������������������� ������ ��������������� �� � ��

=�A =�� ������� ��� ������� ��$ �������� ��@��������������������������������������������� ���

=?A =��������� ��� ������� ����������� ��<������������������������ ��+��������=?A>"�

G�(G G ��������� ������������ ������������� 0 �������0� ���= ���� ���������G�(G� �� ����������� ��+��������������������� ���

�A @������������ ���������������������+����������������������� ����

�A= ���������� ����������������� �� ��������� �� �����������������+����������������������� ��+��������� ��������������$������A����A=������ �����

A=@� 2����� ������������� �������������)$�/ 2����������������� ������������� /��!���(� 2���������������� ������������� >�����=@� 2����� ������������� ��������������������2����A@ =������������������ �������,���04AN =���������������������� ���,���94G�@ @����������������������� �� %��������������� ���02 %��'(� ' %�������������������� ��������������������

�������� ������������� � %����������������?@) ?��������� ���� ������������ �������������?@)� ?��������� ���� ���� ��������������������� �������������??A� ?�������� ���� ������� ���������� ��??� ?������������������� ��������������(= ���������������� �����������������

"&�����2����������� �&��2�����������#&�/#�,���������4 3&�/3�,������2���������4

T@=( ' ������������ 52�� ����& =��������������������������� ���#& ?������������������������� ���������� ���������� �������

@A� )�����D��� ������� ����������������� �������������@A# �������� ���������������� �������������

Page 126: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��6#

����������������������� �������������������

� ��������� ���� ������������)���?A

/*5�=@�G�1#"�#����'!������,����������������"��4G3"""�'3/"�0*"�9*"�1#S1G��K#L>� ,������������� ��� �����

��������������4������6!� ,�"+"+#+2�6�*+"+2!"+25"+�*+7"+!"+�"+��+"+

"+8""+7""+"+�+7"+*"4/"�1*"'3"

7"

�6+*

!"

;

= =

B

.

@ @2.

�"I=�*

A�

=�� ������� ��� ������� ���������������������������������� �"=��������� ��� ������� ������������������������������������ "G ��������� �������������������������������������������������������� #����� ������� ����������������������������������������������� 2�6�*���������� ����������������� �� ��������������������� "G���������� �������������������������������������������������������� 2!"G��������� ��������������������������������������������������������� 25"����� ���� ����������������������������������������������������� �*=����������������� %������� �� ����������������������� 7"=�������������#��� %������� �� ��������������������� !"@����������������������� �� %��� ��� ������ ����� �"A��������������������������� ��� %������������ ��?��������� ���� ������������ ������������� ��������� "?��������� ���� ������������������� �������������"?�������� ���� ���������������������������������������� 8""?������������������� ����������������������������������� 7""'��������������� ���������������������������������������������������� "

"&�����2������������&��2�����������#&����������/#3&����������/3

' �������& ������������������������������������������������������������ ��&���������������������������� ���#&��������������������������� ���������� �����2

����� �������)����������� ������� ������������������������������������������� 7"����������� ���������������������������������������������������� *"

��������������� � &

S1G��K#L>" ���������������� ���� ����������� ���� ������� ���� �������������

S1G��K#L>� ���������������� ���� ����������� ���� ����������� �����

Page 127: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��63

����������������������� �������������������

� ��������� ���� ������������)���??

/*5�=@�G�1#"�#����'!������,����������������"��4G�7""�'3/"�0*"�9*"�1#������ 66� ,�"+"+3+2#"+"+*"+!"+6"+�"+"�*+"+8""+7""+

�+�+**4/"�1*"'3"

!"

#"

6"

;

= =

B.

@ @2.

\*"\**

=�� ������� ��� ������� ���������������������������������� �"=��������� ��� ������� ������������������������������������ "G ��������� �������������������������������������������������������� 3����� ������� �������������������������������������������������� 2#"���������� ����������������� �� �����������������������G���� ���� ��������������������������������������������������������� *"=����������������� %������� �� ����������������������� !"=�������������#��� %������� �� ��������������������� 6"A��������������������������� ��� %������������ �"?��������� ���� ������������ ������������� ������ "�*?��������� ���� ������������������� �������������"?�������� ���� ���������������������������������������� 8""?������������������� ����������������������������������� 7""'��������������� ���������������������������������������������������� �

"&�����2������������&��2�����������#&����������/#3&����������/3

' ������� ������������������������������������������������������������� ��&�=��������������������������� ���#&�?������������������������� ���������� ���2

������� ��������� ������� ������� ������������������������������������������� **

Page 128: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��65

����������������������� �������������������

Page 129: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��6*

����������������������� �������������������

�����������

�����

���������

����� ����

� ���

? ���� �������� ��� �������� ����������

M G����������� ���������&��=@�G+�@�=@�GM =�� ��������� ���������&�=N�+�@=N�M A�� �� ������ ���� ���&�G�@)$+�@G�@)$M '��������� ���������&�'(==N=+�@'(==N=

���� � ��� ���� ���� ����� ��� �� ����� ��� �� ������������ ����%���������������� ������B������

Page 130: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��6!

����������������������� �������������������

�����

�����

�����

����

��

?�� �&�=@�GD@�=@�G���0�����1���

@�=@�G��� ������������ ��� ����-��������/*5�2/*88+��=@�G�

�=@�G��� ���� �� ���������� ��� ��-��������/*52�/*88�

��� �� 6��C��������$�2�0�2$�2�0

�=@�G 1���������� �������+��� ����������� ��� �-��������/*52/*88�,�=@�G��������� ���� ������� ����� ����,�=@�G+�@�=@�G+�=N�+�@=N�+���44�

@�=@�G 1���������� ����� �+��� ����������� ��� ����� ���� ,/*52/*884� �� �� ����,�=@�GD@�=@�G4�-��������@� -��� ������ �� �� ������2�� ��� �%������� ����,�=@�G+�@�=@�G+�=N�+�@=N�+���4������ ����������@�=@�G�

Page 131: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��66

����������������������� �������������������

��

� �

���� �

��� �� 6���� �����.$�2�.$

=N�D@=N��������������� ��������������������� ��������� ������ ������������������ %���0+�9+�1��������� �� �����=A)������������������������� ��/�6+�/�7+�/�8�

����� ������ � ���� �� ������ ��� �������� ����� ��� %����� �� �������������������������� %���

��� �%

=N�D@=N� 0�� 9�� 1��

=N�D@=N� =A)>��

=N� =�� ����� �������+��� ����������� ��� ��-���������/*52/*88�,=N�� �������� ��� � ����� �� ����� ���� ,�=@�G+� @�=@�G+� =N�+� @=N�+���44�

@=N� =�� ����� ����� �+� �� ���� ��� ���� ��� ����� ���� ,/*52/*884� �� �� ����,�=@�GD@�=@�G4�-����������@��� ������� ��������2������%�������� ���,�=@�G+� @�=@�G+� =N�+� @=N�+� ���4� ���� ����������@=N��

0+�9+�1 =�� ����� ��� � ��� ,��� ������4X� ������� %��� ����������������� ������ ����� ���

=A)> =�� ������������� ���,�����/�64�,���������4�

� ����%

?��� ������ ������������������������������������ ��� ������� ������� ��� �� ���� ��� 3"I+� ����%��������� �� ����-�����������=@�G��������������

��� /�6��� �=@�G��������!" @=N� 13"��!" @=N� =A)>3"

Page 132: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��67

����������������������� �������������������

����

����

��� �� 6���� ��� ���0�2/��20�2/�

G�@)$D@G�@)$� ������ ��� ���� � �� ��� �� ��� �������� ��� %���0+�9+�1����������������� ���� ����� ����������0+�9+�1����������������������������

��� �%

G�@)$D@G�@)$ 0�� 9�� 1��

����� ���� G�@)$D@G�@)$� � -��� ������� ���� ����������@�=@�G���� �������������� ����

G�@)$ G� ��� �������+� �� ���� ��� ���� ��� ����� ����-����������/*52/*88�G�@)$��������� ���� ������� ����� ����,�=@�G+�@�=@�G+�=N�+�@=N�+���4�G�@)$��������� %��� ��������������������� ���� ����, ��� ��������� ���4�

@G�@)$ G� ��� ����� �+� �� ���� ��� ���� ��� ����� ���� ,/*52/*884� �� �� ����,�=@�GD@�=@�G4�-��������@��� ����� ��������2������%�������� ���,�=@�G+�@�=@�G+�=N�+�@=N�+����4����� ����������@G�@)$�

0+�9+�1 G� ���� �������� ��� %���

��� /*5 -����������3* �=@�G�0�*�9�* ������������-����������5" )�" � ����������5* �=@�G�05"�9#" ������������-����������** @G�@)$�0"�*�9"�6 �� ���� ����!" )�" �� ����������6* G�@)$ ���������� ���

� ����

����������������������� ������������� �)�"��(������������������� ������������-�� ������������

Page 133: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��68

����������������������� �������������������

��

��

��� �� 6������������.��2����.�

'(==N=D@'(==N=���������������� ����������� ��� %���0+�9+�1�

��� �%

'(==N=D@'(==N= 0�� 9�� 1��

����� ����������������+��������������������/#D/3� ������������� ����������� �����/5�D/5#� ��� ����� ���� ��� ����

'(==N= '������ �������+��� ����������� ��� ����� ����-����������/*52/*88�,'(==N=� �������� ��� � ������ ������ ����,�=@�G+�@�=@�G+=N�+�@=N�+����44�'(==N=��������� %��� ����������������������, ��� ��������� ���4�

@'(==N= '������ ����� �+��� ����������� ��� ����� ���� ,/*52/*884� �� �� ����,�=@�GD@�=@�G4�-��������'�����+� �� �� ������2�� ��� �%������� ����,�=@�G+�@�=@�G+�=N�+�@=N�+���4������ ����������@'(==N=�

0+�9+�1 /������� %��� ������������������� ���� ����� ���� ���� ���� ���� ���� ������� %������������������ %��+������0"�

� ����

�������������� ����������������� ��)�"����� ������ ����� �������� �� �� ����� ���������������-��������/*5���������������������������������

��� /*5 -����������5" )�" ���������������5* '(==N=�0" �������9�*" )�" ���������������** @'(==N=�9" ����� ���������0�!" )�" �������������������!* '(==N=�9" �������0�6" )�" �������������������6* '(==N= �������

��������

��������

Page 134: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��7"

����������������������� �������������������

Page 135: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��7�

����������������������� �������������������

?��������� ������ �� �� ���� �������� � �� ���� ����� ������� ���

��������� ��� ��� ��������������� ���

=� ������ ������ �� ������������ ��0�6��� �� ����� ���� �

-�.�& '())��A��)?'())� G���� �������A� ���������G���� ������,� %��884

0�6��� ���������#?

-�.�& ��*"�'�6�)?

0�6��� ��������

@���� ��2��������������������� ��� �����������.������� �������������������������� ���������������� ���

������� ���������� ������� ��+��� ���� ������� � �������� ������ � �� ��� � ����� � %�� ��� ���� �"������� ���� ���

����������� �����!������

" ��������!������

���������

�����������������������������

�����������������������������

�����������������������������

�����������������������������

�����������������������������

�����������������������������

�� ����

�����������������������������

�����������������������������

�����������������������������

�����������������������������

���

��������

�����������������������������

�����������������������������

�����������������������������

�����������������������������

�����������������������������

�����������������������������

�����������������������������

�����������������������������

��

��

���������

�����������������������������

�����������������������������

�����������������������������

�����������������������������

�����������������������������

�����������������������������

�����

�����������������������������

�����������������������������

�����������������������������

�����������������������������

� �

������

�����������������������������

�����������������������������

�����������������������������

�����������������������������

�����

�����������������������������

�����������������������������

�����������������������������

���

��

��������

�����������������������������

�����������������������������

�����������������������������

�����������������������������

�����������������������������

�����������������������������

��

��

���&�������

Page 136: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��7#

����������������������� �������������������

0�6��� �����025�D���� ����

����� ����� ��������+� ���� �� ����� � � � ������ ��������� ���� ��� ���� � ��� �� �+� ����� �� /���������� �� � � ��� ? ��+� �� ������ ����� �������� ������ ������N��������������� �������2� ������������ ������ ���� ��� �����������?������+������������ ������� ������ ���G@T$���������������������� ������������A=N��

0�6��� ������� ������ �����

.�������������� �+�A=N�

@������ ���� ��������� ���� �� ������������� � ������ �� �� ����� ���� �� �� ���� �������� ������������� �� ��� ������A=N��

$�������� ��'�6+�=$�

�������� ���'�6������� �������������������� � ������ ���� ����������������������������� ������� ���� ������ �� ��� �� ���� =$�� �� ���� ��� ���� ������� ���������� ���������� ��� ���������� ������� ���������������������������������A)��

0�6��� �������� ���� ������

(������� �������%������ ������ ���� � ��������������������+������ ���� �������B��������������� ������������������������������������� �� �������� ������A�A ������ ������� �������������������� �� ��� �� ���� ����� ���� ���� ������ �� ������ ����������������������

G���� ��� �������������� ������� ���� �����������

� ��

' ����� �

G���� �

Page 137: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��73

����������������������� �������������������

��� ���6��� ���2//

((�� ��� ����+����������'�@))�� ��� � � ��� �� ��� ���� ������ A ������ �� ���� ���������������'�@))�

' ����� �

G���� ��)6"������������� ��!"#$$�$%������������

�����&���&�

�� ���' ���������� ���6��� �� ��

����� '�@))� �������� � ����� �� � ��� �� ���� ������ �������� �� ����� ��� ��� ��� ��������� ��

$% ���

��"��/"��0"��9"�#"��'�@))��)6"�3"�0�"��9�"�5"��0*"��9*"

����� ����� �������� ���� ����� �� ��� ���� ��� ���� ����� ���%������� ����� ���������������������(�� ����� � �� ���� � �� ���� ��� ���� � ������ ������� ��� �� �� �� ��� ��� �%������� �� ���������������������������������?���% ����+����������� �����

Page 138: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��75

����������������������� �������������������

Page 139: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��7*

����������������������� �������������������

���#����@����

1���������� ���� �E����

?�� �

) ���&/N�N.��)@.$)�/N�N?��)@.$)) ���&

/N�N. E�������������������Q��������� ����� ��� ��� ,��� ��� ���� �� �� ��� �2� �4

/N�N? E�������������������Q��������� ������� ���,��� ���������������� �4

)@.$) ������ �����,� ����������������� �4)@.$)& E��������� �����

A�� ��� ������� ��� �� �� �� � ���� ,� ���� ��+�����������+�������+��4�� ������� ����������� ��� �� ��� ��� �� �� Q����� ������ ���� ��������� ����� � ������������� ��� ������ �������/N�N?� ��D��/N�N.������� �������������������������������������������������������� ��������������� ����� ������

A�� ��Q�������������� ������� ���� �����������

��������� ���� �E����

?�� �&

) ���&(?���%��������/N�N.��)@.$)���(?���%��������/N�N?��)@.$))@.$)&

(? ����������

/N�N. E�������������������Q��������� ����� ��� ���,��� ��������� ������ �4

/N�N? E�������������������Q��������� ������� ���,��� ���������������� �4

)@.$) ������ �����,� ����������������� �4)@.$)& E��������� ����

E��������������� ���������� ���������(?��� ������������Q������������ ����������� ����������������������Q��������������������������

Page 140: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��7!

����������������������� �������������������

���#�����#�����#���52�

'��� ����� ������� ��������� ��������������������� ����� ���������������� ������������ ������������ ���%��������

@����� ���������� ������� ������� ������������������������:'G/:���� ���������:,4:�������������������� �����%������������B��� ������ ���

@����� ���� �������� �������� ������:'G/,4:�

$% ���&��"��'G/�,:=�����������������:4�#"��0�����9���������8"��'G/�,4

@����� �����%��� �����������#5��� ��������� ���������� �����������������,#%!#��� ����4���������� ��� � ����� � �� ���� ��� ���� ���� ������ �����%��

9���� �� �������� � ������ ��������������� ������ ������� ���@� ��� ������ ������� ��� ������������������������� ���@�� � ����� ����� �������� �� ��������������������������������������� � ��� ������@� ��� ���� �������� ��������� ����������:G$�@):� ��������� ��� ���� � �� ������ �� ���������@� ��� �� �� ����� �������� ���� ���������

$% ���&��""��G$�@)�,!*"""4 �������XG��� � ��!*"""

Page 141: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��76

����������������������� �������������������

2��$��;>�5��-�5���2�$�2��2��$��2+;��5)��2��$������ ���#�2�;2

5���������� ���� ���������

T�������������������J1�������������21+������������������ ���� �������

�" 7 ��������� �������������������� ����2� ����������, 7 ��������������� �������� ����2� ���������

�* 7 ����������

0�������������� �����

��������������������� �������������� �����G�

$% ���&�#" '3 G#"""G������N������������,����4������#"""��

0�����������������

GANG������������������������� �������� ������������

?�� �&

GANG>��� KIL

��

��

��

��

Page 142: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��77

����������������������� �������������������

Page 143: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��78

����������������������� �������������������

���'���(!�����������)?������������������������������� ���� ����� ����+����@� %��� ������������������������ ������ ����������� ����� � ������ ���������������+�����@� %���,�� �������� ���4���� �� ��� ����� %���������� ������� ���� ����� ��������� ������ ������ � %���

��������� ������������@� %������ �� ���� �����������������

������/"��@8"

Page 144: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��8"

����������������������� �������������������

(������������������������� ��������� ��� � �

����&������� �� ��� ��� ����� ���������������������� ����� ����+� ���� -��� ����� ������� ��� ���� ����� � ����� ������ ,����� � �����4� ������������ ������������� ����� � ���

+.4�8�

��������������� ������ ��� ����� ������ ������������������� ��������&M�)��������� ����� �������������� ��������+M�� �� ������� �������������� ��������+M�@����������� ���� �������������� ���������

���� �� �� ��� ���� ��� ��� ��� �� ����� ������������ ��� ���� �������� �� ��� �������� ��� �� � �

G��������&���� � �������������������������������������������������=@�9),��4�����������&���� � ������������������������������������������������� �=@?NN?

Page 145: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��8�

����������������������� �������������������

/*5�=@�G�0!5�*������'!G#"""�?#""�'3�'7/"�0�"�9"�1#"�=@�9),5*4/**�=@�G�0!��*'��/"�9"/��0"�/5#/3�02��*8��96�76���=>#"/��028�8*#�9#6�*"7/#�028�8*#�953��5#��=>#"/��02��*8��9!#�733/3�02��*8��967�5!6��=>#"/��028�8*#�987��*7/#�028�8*#�9��3�573��=>#"/��02��*8��9�33�573/3�0"�9�5��3��=>#"/��0�"�/5"�=@?NN?'�"/*5�=@�G�0!5�*/"�0!"�9!"�1!"'3"

����

���

��

���� �����

��� �

��

�����

��

�����

��������

���π

����

Page 146: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��8#

����������������������� �������������������

6$��� ���A�#��6+�����6����6�>

�������

��� ���

����������

����������� ���������� ������������������������������������� ���

. ������ ����,�?�4&����� ��� �������� ����������� �����/5�D5#������������ ���� �������� ������������

����� �������������?��� �������������� ������������������� ��������� ��� ���������������������������������������

������������������ �������������������� �

��$��

,����� �����������$���������������4������ ������������������������������������������� ��� �����������������@��� ����&�������������� �������������� �����,������������4

���

,����� �������� ��������4. ����������������� �������� �������� ����������� ��������������������� ��������������� ���������������������������� ��� �� ��������������������������������� ��� ��@��� ����&����������������� ������������������,��������������4

����

,����� �������� ������� �� ����4��������� ��������������������� ����������������������������������������� ��� ��N��������� ���������� ���� ������������ ������� ���,���� ������� ��������������������� ��������+����� �����������������4�

Page 147: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��83

����������������������� �������������������

�--��� ����0���

��������� ����������� �� ������������������� � ��� ��������������������+������� ������� ���������������������������� ����������� ���������������������� ���� �� � ��

����� :��� G�@=�:� � ���� �� �� ��� � �� ��

�����������@������ ������� ����� �������������������������� ��� ��������������� ����������

�-#��� ����0������������� �

'"�� ����� ����� '""+� ���� ����� ����� ���� ��������:A=N/=@''$��G�NA�9$G:�� �������������� � ��������������������:A=N/=@'�������:�

����� :��� G�@=�:� � ���� �� �� ��� � �� ��

�����������@������ ������� ����� �������������������������� ��� ��������������� ����������

�-&� ����� ����

'"#�����������'3"�

�-"�������0������.�����@����

���� ������� ����� ��� ��������� ��� � ����� �� �� �������������� ��������� ����+������ ���������� �� ������� ��� � �������� ��� ��������� �����'"3����������������� ��������� ����������������

�-,�������0������.�����������@����

����� �������������� ����������������'"3� ������

'"5����������������� ��������� ������������������-*�������0������.��

����� ����� ������ ����������� ����@�������� ���������������������������� ���� ��� ����������������

�-A$����� ���

���������� �������������������������������� ���������

@������ ������� ����� ��������������������������� �� ��������������� ����������'!� ������������������������������ ���������

�-:���� ��.�

�������� �����������������������

�-4���� ��.��

�������� ������������������������

�#-��'�������'����� �������

������ �������� ��������� ����

�##���� ���� �������'�������'���

�� �������������� �������� ���������� ����

�#?0�6��� �����

'�6������������������������ ������������ ������ ��(��� ���� ��� ���������������������������������������������� ��2����� ����������� ���'�6������������ ���������� ���������,�������4�

�����!�����&������ �����

Page 148: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��85

����������������������� �������������������

� �����%�����'����� ���� ���� ������� ��� ���������%��������������� �����+����������� �'� ���� �������� ��� ������� ��� ���� �� ���������������� � �� � ���� ����������� ,����� ����� ���������������� ���� ����4�

�&*�� �������'���3.���� �����'���

���� �� ����� �� ���� ��D�� ���� � ������ ���� ��������

�&A�/.0��� �������'���3� �����'���

���� �� ����� �� ���� ��D�� ���� � ������ ���� ���������

�&?0��'����'������� �

N������� ���������� �������� �������� �������� ������������� �����������������,��� ��������� ��� ���� �Q�����4�

�"-� ����� ����

����� '3"� ��� �� ��� ����� ��� ��������� ���� ��� ������������������������������� ���� ��?��������������������������������������� ��������

�?-0�����������������

�?#����9������.�

�������� ������������������� ������������������� ������������������������

�?&����9������.��

�������� ������������������� ������������������� �������������������������

Page 149: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��8*

����������������������� �������������������

���������������������

����������������� ��������� �����������������������@������� ������������ ���� ���� ���� ������������������� ������ ������� ��������������������� ������@������� ���+� ������� � �������� ��������� ����� ��� ������ ����� �� �� ����

�������������� ��� � �������� ��� ������ ����� � A�� ���9���������� �� �� ����%�������� �� ��D������ ���� ���� �� � ��������������:�������:� ��:A ���� ��:9������������������������������������������:G�2��:� ���:����������:� ��D��:=�������:��

� � � � � � ��������

A�� �������������������,� ����������� � �����������������4

/ ���������� ������������� �������������������

A�� ������������

?����� ���������������� ,��������+�������4

Page 150: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��8!

����������������������� �������������������

0������������@�)F0� ����'���� �F

$��������0 �������������������������������������������� #"�"""�� ���D ����D��������?G ������������������� #�"""

����������� �����������������%��������������� ���������������������������������� ��� ������ �����

������������������������ ������������������������������������: ������������:�������� ��������#���������� ������#

���������� ���������%

����� ���� �������� �������� ������ ���������� ������������ �������

M ���� ������ ���� ��� 0� ��� 1� ����� ���� ����� ����������

M A� ������������&��/�6�D�/�7�D�/�8M (���� ���������������� ����� %��

2��(@'N��,�� ����42��(@'N?�, ����42��(@'8"�,�� ����D ����4

M G� �������, � ��4&�/"�D�/�

���� �� ����� ����� �� ������� ��� ��������������������������: ������������:�

�� �������#�����#=

9���� ����������������������������������������������� ���� ���������������:@���� ��2 �:�

?����� ������ ��� ���� ������� ����������� ������������������������:@��� �����:�

����

�����

��

���

��

����������� $����

Page 151: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��86

����������������������� �������������������

0������������@�)F�����F

������� ��������#����� #

0������������@�)F0� �������C��� �F

$��������0 �������������������������������������������� 2�"�"""� �������������%��������� ������������������������ "�"""

������������������������� ������������������������������������: ������������:�������� ��������#������������%����#

���� ����������������������������������������������������������� �"$��������1 ������������������������������������������� 2#"�"""$��������0 ��������������������������������������������������� 3"� �������������%��������� ����������������������� "�"""

������������������ �������� ����� ��������������� ��������(� ���F� ��� ���� ���� ���� ��� ����

���� ����� ���������� ��� ���� ���������� � �� ��� ��� ����� ���� �������� :�� ���� ������:�� � � � ������������������ ������������:�� ���� ����:������������������������� ������������������������������������:@������������:�

������ �� ��� ����� ����� ���� ������� ���������� ���������������������� ������ ������ ��� � ������%���� �������������B������� ��� �����2� ����%�����������������������������

@��������� �� ����%�������� ������������������ ������ ������������ :=�������:�������� ����������� ���� ����� ��� ���� ������ ����� ������������������������������

9����� ��������������������� ������� ��������������������������������:@����:�

Page 152: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��87

����������������������� �������������������

0���@�)F0� ���� �)F

@��� �� ����� ������ � �� ��� �� ����� ����� �������������

@����� ������������� ������B�����������0���12������������������������������������ ����� � � ������� ��������� �� �����

C������ ����������������� ���� ����+�������������������� �������� ����� ���������� ����������� ���� ����������������� ������

0���@�)F��������F

9��� ����� ���� �������� :A���:� ��� :������ ������:�����������������:��������:�

������������:A���:�������� ��� ��

������������ :������������:� �������� ��� �������� ������������������� ����������

! ����M ���� �� ����������������������� ���M ����������� ����������M �� ����� �������� ������������� ����������M C�������� �� ���� � ��� , �� ���� ���� �������������4

������M ]� ������ �^������������� ��

��>�"�"""

M G������� ]� ������ � �� ����_� ��� �������� ��� ���������������������� ������ ��� �������

M ]������������^��� �������������, ��4� ������������ �����������, ���� �� ������-��� �4

M �������������������������������� ������� ���

��������������M C������������������������

�������������&M ������������������������������ �+���� ���� ���� ������������ ������ � �

M ��� ���� ���� �� ���� �� �� ��������� ,��� �� �������������������4���� ����������������� �����������������(�������� ��� ��� ������� �����������������������������,�������+���%���������4� ������������������������������������ ���� �� ����������� ������ �������������

�� �������M ����� ��������� ��� ����� ���������� �������������� ���� ����� ,���������� ���-��� �� ��D�� ���� ��� ����������4

M ���������������������������� ���������� ��� ������� �G������������,������������������������� ���4

M ���������� ����������������� ���������� � ��������� ��� ������� ������� ��������

M ������%���������������������������������� ��$'�N����������������������������� ��� ����2����

M �� ��������������� ���������� ��������� ��D������� ����������� ��� ��������������

������ ���M `�� ���D ���������� ��_���� ������������ ��������������� ������ ������������ ���=�����&���������� ����� �������� ���

!�����������������&��������*� �+�������$,�-������./0/1

Page 153: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��88

����������������������� �������������������

M `(�������������������� ����P_������������ �������� ����� ������������������������������ ��������$% ����&�������������������������������������(���������������� ������������� ����������������������� ������=�����&������������ �������

M `(���� ����������P_����� ��������������������������� ���������� ������������$% ����&��� ����������������������������������� ����������������� ����� � ������ �� ����������� ��� ���� ������������

�� ���2���� �� � �������� , �� ���� ���� �������������4

��� ��������� ���������������������������=�����&�������� � ����� �������������������������������

M `' ����� ������������������P_9���� ������� ��� �������������� ������������������������� ����������=�����&�?����� ��� ����������+������������������ ������ ��������

����M <����� ���� ����� ���� ��������+��������������������������� ���������� ���������� ������ ���������� ���

M ���� ��� ���� �� ���� ��� ���� ����� �� ������� �����������

Page 154: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���""

����������������������� �������������������

Page 155: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� ������������������������������

���

��������������� �������������� �

�������������������

��������������� ��������������������� ������������� ���������������������������������� ��� ��������������������������� ��������

��������������� ���������������������!� ��� ������������"�� ��� ���������#����������������$%������������������ ���� ���������������������

&�����������������������������"�� ��� ��������������������� �����������������������'������

����� ���

�(� )��������

���������'��(�'�����"��������%��������� %����������� ������������������'������������������"���*������'�� ����"�%�� ��� ���� ����

�� ����

#+, �, -.,, /�., 0,1�� ����������������������

#++ �2 3�)�������'��� �����

#(, �()����������

#(+ ���

���������� �����

���� ����"�*� �������!��3��� ������ ������"�*�

������ %�����"�*� ���"��������� ������"�*� ��3���*��������'�

������� ��45#6��758�0�,3902,3�'��� �*�������� ������'����3�����'��:�*"�������'��������������������'��������������� �������:�*"�������� �����'���������� ��������'�������������

1��������������������� ���� ������"�*� ���������������� ����*��"��'���������� ���� :�������������������'���� ���������� ������" �'��3���'�����"������������ �� ������������������'�������������3��� ����3.�

���������'����3�������"������������ ������'���3:�*"����������������*�������'���%�������'������ ������� ���������*�� ��'�� ����������'���� ������ ����������:����� �'�"�:������

;����*������"�*� �������<.,,,:�3�����

�������������

��

Page 156: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� ������������������������������

��.

��������3������������������

�� �3��������� ������������� %���"��

� ��3������������������'� ���������� ����'�:��������������������*�������'�

�����"����������� %:���� ��'�*���� ��� ���� �������������������� ������

��������=���������"�*� ������������*�����'�"����������"�*� ��������" ���

��������#"�*� �������������� �������1�������������������� ���� ������"�*� ����������������� ���*��"��'���� ������ ���� :� �� ���� ����� ���� ���'���� ���������� ������" �'��

��������������#"�*� � ��� 3� "�*� �� �� � ���� ���� �*"�� ��� �����"�*� �������

��������������"�*� �'��� �����������'��������

������������

����������

� ����� �����

������ �

��� ��������������

��

��

��

��

��

��

��

��

�� �� �� �� �� �� �� ��

������������ ����������������� �

�������

�������

������

�������

���

����

�����

��������������

���������

��������

�����������

��������

�������

��������

��������

���������

� !

�������� � "����#�$�����% �

����&���'()��$�����������&��*

������������$����

+�������

+������

���&�%�$�����%��&��

���&�%

�������� ,��� -�%�

.

.

.

.

��

��

��

������##%�� �

+������/

Page 157: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� ������������������������������

��<

4�����%��

������������� 4����������������>������� �� ���� �����"�*� �

������������� 4��������������������������>������� �� ���� ������ ������"�*� �

������3������������ ������������ �'��������� ���������������"������; ��������������%�3�?����������� �����������%�������������������%��3�?����)6����3��:�3�?����&&?��'�1$&7��

3���������������"�������'��������'������� �������3����*��'����'�

3������"������'��1��%�������"������'�������������������3�"�*� ���*��'����'�����3�"�*� ���"���*������"�"�������"�����:������������������" ��'�����"��������3�:�3.:�3<:32��'��%�32����*��'����'�3��������*��'����':��������������������������"���*��'����'� ��� �����"����������� ��������'����

1*� ��>��������"��'������

�����3� �������������������; ��������������%��&��&�������� �����������%���������� ���� �������� ������%�� �'� *���'�� �� ��"���'���

; �������'��������"�*� �������'�����)#)�� �� ���������� ���� �� �� ��� "��

1�������������������������������'��������������" ���

5�"�����'@� ��%�"������� ����� �A"����'����'�3�"�*�

�'��������� ������ �

&8)������������� �A"����'�����

1*� ��>��������"��������������

!"��"��#�3����%������������;���������" �� ������� �A"����'������'��������� �����������%�B&8B�

��#����*�������������� �������� ��������'����

#��������'��1��� ������'�����������*���''�'�������>������������ �������"�*� ������������������'������"'*���''�'���������"����������"������'���'���������%��������������'���

)��� ��%�" ���"������� �

����������%�&8�����*��������������'��:�1$&7������������"������'���

#������1�����������*���''�'��������������� �������"�*� ��'������%�����������������

)��� ��%�" ���"������� �

����������%�&8�����*����������������:�1$&7������������"���������

���������������� ����1"�������� ����'��������" ��:����������� �B�������" ��B�

Page 158: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� ������������������������������

��2

��������������������������

����'� ��������������������'���'����������������������������

��������������������� ��� �����������?��������� 7�'�"����-/�����������"�� '��� �*��� ���� "�"�� ��������� ��� ���'�����'�'���� ���

��0������������������ ��� �!���������� ��� ����������"� ���� ����'��?���������-7�'�"���� -����

������� �����������"� ���� ����'��?���������/7�'�"����/ ����

$�%���������������" ����������������� ����������������

C� �����������%�"��"����'������D ?������D 7�'�"�

C� �' ������������ � �'�"��E�,:�*���"���' ���������" ���������� �"��� ����

5��������'��������'������<�������"��,��"���*���� �'�

1����� ���"������*����� �'�*%�������� �

��

� �

Page 159: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� ������������������������������

��+

$�%���������������" ��������� ���� ���� �� �������

C� ���"� ���� ����'����������������0�� �������"��'�

��0���������>�������� ����������/���������>������ ��������������� ����?���������/?�����.��� �?�����<���-�7�'�"����-9

������������>�������� ����������-���������>������ ������������� ����?���������-?�����.��� �?�����<���/�7�'�"����/9

C� ���"� ���� ����'������������ ������'�'�����������'�����������������"� ���� ����'�����%����������� � ��� *���� ��"���'� ����'����������� ��������������������� %���"��

$%�������������������?�������� %�����*������" �'������������" ���'�������'�#F����"��'���������"�� ��� ���������

����*������"����'����������'�������� ���#����#F�

&���� ���� ��� ��#��������������

=��� ���� �>��� �'� ���� ���'�� �>��� ����� ���� �����������:�����������������'���������

�������'����������"���*����� �'��''�����%����*�����"��?�����<���-���� ���0��� ���/���� ������

C� ���"� ���� ����'�������"����'���������������"�,��"���*����� �'��� �?�����<�

��

��

��

��

����

��

��

��

��

����

���

���

��

�������� � ������ �

������

Page 160: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� ������������������������������

��(

� �

��

����

�����

��

���

��

� ��"������" ������� ����� ��������� �

. 4�����G&����'�

< � ��� ��� ���'�� ���� ���� ����" ��� ��� 9���� ��������� �����:��������� ��������� ����,�

2 )��"������'���� ������ &�� �����1 ���;� ����� �������������

+ ; ����������%�3���7�5#��)&�;�#41�

( 5��������'�B7��� ���B����������>����� �

� �������� ����'�������������������&8���� ��� ������"�����������������'���������'����%�'�"'� �?����������� ����"���������"'� �7������"��

0 ��� � ?����� �� �� ���� ���'� B7��� ���'�������B����B ��� ������"�B�

� )������������������*������" �'�

�, � ��� �������������������" ������9����� �������� ���;����������" �� �������������� ����"�*� �

�� ; ����B'��� ����������B��)������>��� ��'� ����&8������������ ������'�"'� �?��

�. 4������>����"�*� ��'� ������� ���������"����������� ������" �'�

������������ ����

1 3� ���� ����" ��� ������ � ��"���� �'� ��"�� �������������'���� ������

$ 6���������A"�����*���������"���� �������� �'�"����"���'� ��������-�� �/���(� 4��� �>��� ��-� � �/� �'���'��� �� ��"��

'� ������

������� �����

���������� ��������������������������

Page 161: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� ���������

���

������������

�����������

���������������

������������� �������������������������������

�����

���������������������������������������������������������������������������������������������������������������������

���������������

������ �������������������������������������������

�������

������������������������� �������������������������������������������� ����������������������������������������������� � ������������������������� �������������������������������������������� ���������������

������

!��������������������� ��

Page 162: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� ���������

��"

����������������

#���������$����%������&�$�������������'����������� �����'(#)($%�#*+(*,+-�

-���� ���� ���������� �� ������ ���� ��������� � � �������� ��� ����� �����������&� ����� ��������&�����������&��������������&������������&�������������������������

��������������

��������� �������������������������������� �����. #���������$����%������&�$������������. '����������� �����'(#)($%�#*+(*,+-. %�������������������������������������������

������

� � �

. /��������������0����������������������������0��������������������� �����$��+(�+!$1�+�

. +��������������������������2�������������3�2� ������� � ������

. -����������������������� �����������������������&��������������������������������������������

���������������������� �������

4�������������. #���������$����%������&�$������������. '����������� �����'(#)($%�#*+(*,+-

. %�������������������������������

� � �

. '����������� �����'(#)($%�4+�+5�,#!�

. �������������������������������������������������

4���������������. ,����������������� �� ���������������������������

����������

� � �

. '����������� �����-#(6',+5+�4+�+5�,#!�

. , ���������������������������������������������������������������&�������������������� ������������������������������������������������ ��������������'$(���-'7������������������'$(���%'��������������������������������

. ������������������������������������ ����������������������������������������

. , � ������ ������� �� ��������������� ���� ����� ���� �������������������������&���������������������������������������������� ������������������������'$(���,!,��

������ ���������

Page 163: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� ���������

��8

������ ������������ ����

4���������������� �������������

5������ ����� #��������� $���� %������&� $������������

'������������� � �����������������

4����������������� &��������������� �

$������������������ �

������������������������!�

8�4���3�+������������������ �����+%+()+!5/�#���������������������

9�4���3�$��������� �����������$���������������������������

:�4���3�%;0%������ �'��������������� �������������

5������������� �

<�4���3�1������������41�����$����������� ���������������������������

5������������� �

=�4���3�!5�4�������� �

������������������������������������ �

5������������� �

>�-���3�(��?�����������������(��?���������������������� ������������������������������������������������������������������� ���������������������&�� ������ ���&����������&��������������������������������������������� ������� ���������� ��������� �������

@�-���3��������������������������� ������� ��� �� ������� ���� ������������ ��� ������������������������������������������������ ��������������������������� ������ ������������������&�������������������������������������������� ������� ���������� ��������� �������

�;�-���3�7�������������� �'���������������������� ��������������������������

�=�-���3���������� ���������;A���� ���� �������������������;A����������

�>�4���3�!5����������������'����������������

"��-���3�1���������������� �-����� ������ ������� ���� ������� �� ���� ���� ������������� ����� ��� ��������� ����������� ����� ��� ��� ��������������������������������������

Page 164: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� ���������

��9

������ �������

'����������� �����'(#)($%�5#!�(#��

4���������������� ������������������������������

��� � �

$��� ����0������� �������� ���������������������� �

46,'�4���������-��������� ��������������� �&����������������������������������������� ����������������������0!������������������������������������������

7(/�7������� ����������������������������������������������������$��������������������������� ��������)�&�)"&�)8&)88&�������������� ������������������ ����������� ���������� ��������������� ������������������������������

(#*�(������� ������ �����

41���4����������������������� ������������ �������������'��������������������������� ����� ������ ������

5������������� �

41�"�4����������������������� ����� ���������'��������������������������� ����� ���������&���������� ��� �� ������ ��� ���������� ��� ���� �������������������������

%;��'�������������-����%;������������������������������������������������������������������-��������� ��������������� �&���������������������%;��

5�������� �

7(��7(�����������$������������������������� ��������������������������������

'(��'�����������'��������������������������� ������

Page 165: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� ���������

��:

������������

1������������������������������������ ���������������B���������������������������������������������� ������������������� ��������

���-������������������������������-����� ������ ������� ���� ����� ������������� ������������������������������������������������?�����������������������������

$������������������� �������������������������������������������������������&������������������ ����������� ������� �������� ����� $ �������� ���� ��������������������������� ��������������������������������

"��-�������������������������������������-����� ������ ������� ���� ����� ������������� ������������������������������������������������?�����������������������������

$���������������� �������������������������������������������������������&������������������ ��������������������������������������������� ���������������������� ������������������&� ���� ����������������� �������������������� �

4�B�����3

. #���������$����%������&�$C�#����������������

. ������������ ���������������������������

. ������������������(+4+���������

. '����������� �����1�#56�4+$(5D�

. '������������������������������������

. 1����� ������� ����� ��� ������� ����� ���� �� ����5$�5C�$�+� 5#!�#C(� ��� 5$�5C�$�+� 1�6+!7'��

. ����������������������������������������������������������������������� �������

. ���������������������

. �������������������������������������������

���������B������5�� ������������ �

. ������������� ������������������������������������������������������������ ��������� �����������������������������������������������

Page 166: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��������������� ������������������� ���������

��<

Page 167: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���

������������������������� ������� �����������

���������� ���� � �������� � ��������� � �������������� � ��������������� � ������������ � ����������

��������� ����� ����������� ������� ���!��� �"����� ���!��

���������������� ��������� �����

�������� �� � �� ���� � ����� ��� ����� ����� ��� ������������������������������������� ����� ������� ����������������������������������� ������ ��� � � ��� ��������� ���� �� � ��� ��� �������������������� ����������������������������� ������������������� � �� ��������� ������ ��� ����� �� ������ ������������������� ����� ���� ������������������������ �� �����!�����

������������

" #������ ���������" ������������������" $������������

������������

%&'% ����� ������� ����� ������ �(�)*+���,��-

./�01������ �� ������������� ������� �()*�2����������2����-

34403��� �����(�'.#/�*�-�� ��1�0$/�*2-������ �(���2

56�.���$5%%������������7�������������������� �(�2�����+88

$'.%&�5������������ ��� ������������������ �9���:���������+22�5�������������� �(�1����� �;�� �����2�����+88

�<%$����� ����*�����������-�� ����� �� �(�������� �� �������� ����� ���������� �

1.�=/��������� ��������� ���� ��� ����� �� ������� ����� ���������� ��

������������

�������� �������� ��� ��� �� ���� ���� �� � ���������� ��������������������������������������� ��� 7��� �������� ���� ������� ������ ������������������ ����������� ��������������$����������������� ��������������� ������$������������������������� ���������� ������'�� ���������������������� ������ �����������>?>������������� ���������������� ����

��������������������������������

/����(

?��@%=������ 5��� �� ����� �������� ���� � � ������� ������� ���������

�������������� ����������

Page 168: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��+

������������������������� ������� �����������

������������

��� �� ����������������������� ����

���������� �������������

������������ ����������� �� ���������

��� �

������������!"

��� �� ����������������������� ����

���������� �������������

������������ ����������� �� ���������

����� �#��"�

������$���%�&

��� �� ���������� �������� ���������

����� �����%�&�������������

����� ����������� �� ������������ �

������$���%�&!'()*

��� �� ���������� �������� ���������

����� �����%�&����������� ��� �#��

���'()*�

����++$���,�++��-&

��� �� ���� .������ �������� ����

���������� �����,�++��-&������

������������ ����������� �� ���������

��� �/��$0�1

����++$���,�++��-&!2

���++$���,�++��-&!���

����++$���,�++��-&!��$0�

��� �� ���� .������ �������� ����

���������� �����,�++��-&�

����-&��3�0��4,2!'*

����-&��3�0��4,2!5�5

����0���3�6'70��%$�,2!50���5

4 �� ����� .������0������� ���� ��� �

������� .��� � �������������8��#��

�#����� .��� � ������������� �������

�9# ����� �:���� .��������� �� ����

�����

�����;�0��;�0����!/;21

����� �� ����� .�������8���� �������

� ����8��� ��� ���� �� �������

8���������.���� .� ��� ����(������;2

4 �� ���������0���3

4 �� ����������;�0

4 �� ������������

4 �� �����������$

4 �� ���������++$

4 �� ���������-&�

< #�� �� ������ �� ���. �������0-���

�� � ������ ������ �� ���� .������

-� �� �� �����������0-����� � �����

���������/'*��������� ���. �������������

�1

����������������

����������������������

% � ������� � ��� ��� ����� �� ��������� �������������� �������� ������ ���������� ������ �������������0���������������� �������� ������������� � �������������� ��������������������� ������������

������� ��

��������� ����� ���������������A+������������'�������� ����������������������������� �� �������'��>?>������������ �������������������� �������������������������������������������

1�����(

B/1��%&'�� �����B/1��%&'�� ��C���

B/1��./�0�� �����B/1��./�0�� ����� ��+CA�� ��D���B/1��./�0�� ���9������� ������������ ��+:

B/1��3440�� ��

B/1��56�.�� �����B/1��56�.�� ���9������� ��:C*>�>�>3>����-

B/1��$'.%&��9���� �� ���:� ��

B/1���<%$�� �����B/1���<%$�� ���9������� ��:

B/1��1.�=/�� ��

/����

%����������� �������� �������������� � ��������� ������������� �����7����� ����7��������������������� ����������� � �����������������������'����� ���� ������ ������ � � �� ����������4 �� � � ������� ���� �� � �� ��� �� �������

����������������<%$������� ����� ����� ��� ��������������� ������ ���� ���� �� ��� ������������� � ������ ���� �����

Page 169: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��A

������������������������� ������� �����������

������

��� ��� ��� �����

��� ��� ��� �����

����� ����� ������������

�������������

E�������� �

B/1��56�.��&�=/9 ��:B/1��%&'��&�=/9 ��:B/1��./�0��&�=/9 ��:B/1���<%$��&�=/9 ��:B/1��1.�=/��&�=/9 ��:B/1��$'.%&�9���� �� ���:�&�=/9�:B/1��3440�9 ��:

%&'��&�=/9 ��: ������� ���� *56�.�� %&'�./�0���<%$��1.�=/��3440-

B/1��$'.%&�9���� �� ���:�&�=/9�:'�����������$'.%&���� �� ������ �� ����� ���� ���, ��������

&�=/ �������� ��

������� ���� �� �������� ��� +� ��� ��� �� �� � ���� ��������� ���� $'.%&�� �������� ���� � �� �� � ��� ��� ���'������ �� ���������7���������������������$��� ��

����������

'��� ������� ��������� ����������������������� ���'��������� ����� �������������������� ��������� �������������� ���'��������������� ������ �� �������� ���92�2:�;����� ���������7����9A�D:����������������������������� ������9+�A:�

% � ��� ����� �� ������ ��� � �����7���� � ���������� ��� � ��� ��� ��� ������ � �� � � ����� ������������������������� ��������������� ���

���������������������

% �����7���� � ����� �� � �� ����� �� ��� ������� ������� ���������������� ���� � ������������� ��'����������� ��������� ������� ��� ���������� � ����� ��� ���������

Page 170: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��D

������������������������� ������� �����������

���������������������������� ��

������������ ���������������

B/1��'������.%�30/C$/'*���-B/1��'����..��9 ��:C$/'*�����������-���B/1��'������.%�30/C���B/1��'�����..��9 ��:C*�����������-

" '�� ����� ��� ������ � ��� ����� �������� ��������� ��������� �����7���� ���������������

" ������� ��� ������������������������������� ���������>2>�

" '��������� �������� ���������������������,����������<%$�����

" %��������������������������� ����� � �������� �������������������������� ������

������������ ���� �������!����

�..��9 ��:C$/'*������������-�..��9 ��:C$/'*/������� ��/������� ����-

" 1���� ������� �����7������������������������������ ���� �

" /������� ����������������������� �����7���� �����

" % �����7���� � ������� ��� ��� ���������� ������ ������������� ������������ ��������������������

/����

����� � ������������ �B/1��%&'���..��98�8:�..��92�2:C$/'*��+�A�D�8-�..��9+�A:C$/'*�������DF8�G-

'�������� ������ ����������������������������

/����

% �����7���� �� �� �� ?=�@�<@�/04@0%=%'9���<�:C$/'*����+�+�A�A-

5������ �����(

?=�@�<@�/04@0%=%'9���<�:C���?=�@�<@�/04@0%=%'9+��<�:C+�+?=�@�<@�/04@0%=%'9A��<�:CA�A

����������������������!�����������"�#

������������ ���������������

B/1��'�����..��9 ��:C./E*���-

�� ������ � ��� ��� ����� �� ��� ���� ���*�� ��� �-�

���������������1.�=/��� ������ �����7��

/����

B/1��./�0���..��89�2�A:C./E*H�H-

������������ ���� �������!����

�..��9 ��:C./E*���-�..��9 ��:C./E*������� -

" /������� ����������������������� �����7���� �����

" ��������� ������� �����7�� ��������������

" % ����7���� ������������������������������� ���������� �� � ���� �� ����� �� ������� ������������

��������������1.�=����������������� ��� ���� �����7�������������� �������������

/����

% �����7���� ������� ��� ����� �����

B/1��1.�=/��1.=9�2:1.=98:C./E*5'.�&$*<�8--

Page 171: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��8

������������������������� ������� �����������

/����

% �����7���� ������������������������'����� � ����� ��������� ������� � ��

&�2��B/1��./�0���..����9�2��A:�C�$/'*2��2��2���2�������+��+2��+2��+2��A2��A2��A2��D2��D2��D2��-&+2���..����92�2:�C�./E�*�22-&A2���..����98�2:�C�./E�*,�22&D2���..����92�2:�C�$/'�*2�����+��,�2��,����,�+��,+2��,+2��,+2��,A2��������,D2��,D2��,82��,G2��,I2-&82���..����9J��:�2�$/'�*J����J�+��H�2��H����H�+-

�����

� � � � � � � � �

� � � � ��� ��� ��� � � �

� �� �� �� ��� ��� ��� ��� ��� ���

� �� �� �� ��� ��� ��� ��� ��� ���

� �� �� �� ��� ��� ��� ��� � �

� �� �� �� ��� ��� ��� � ��� ���

� � � ���� ���� ���� �� �� ���

� � � ���� ���� ���� ���� ���� ����

� � � � ���� ���� ���� ���� ���� ����

� � � � ���� ���� ���� ���� � � � �

� � � � ���� ���� ���� � � � � � �

����������������������������

����� ����!��"�#

$���� �%����&���#����������

��������!��'���������������������

��������"���!��"��(� �)

$���� �%����&���#���������

�(������!������'����*���+��

�������������������������

����������

$���� �%����&���#�����

�����������!��'����������������

�������������"���!��"��(� �)

�����������������������������

������*���!��"�

Page 172: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��G

������������������������� ������� �����������

������������� ��

% ��������������� �� ���������������������� �������� '��� �� ��� ������� *� ��-� ���������������������������������������

������������ ����� ����������������((" &,������ ����" �,�������� �" 0,�����������

% ��������������� ����� ��������������� ����������������*<9�:���� ������������ ��������<�-�

/����

$�CA22����������������������B�������������� �

B/1��%&'��$E%&#C�$9$E%&#:CA22

% ��������������� �($���A22�������������� � ���� ��������������� ����������$E%&#�

����� ���

�������������� ��������� �������� ����������,��K�������������������� ������������'������� � ������ ��������� ��������������#������ ������� � �������������������������� � ��� ��� ����� �������� � ���� �!���� ��������������������������� � ���

/����

.�C�2�8�J��.+CD�������CD8<CDI������C.+

.�C.A����.%�C.D

.DC,.8��.IC,��.%J

����� � ���� ���������

����� � ������������,����������� ���������� � �� ������������� ����� *� �� �� �� ��������%&'K./�0-�

���� ����������� ����������

������� ���� ���������� ������� �� ��������������� ���� ���56�.����$'.%&��

/����

=$�*>1� ���� ��� ����>-B��������������>1� ���� ���� ����>�� ������� �

Page 173: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��I

������������������������� ������� �����������

�������������� �

���

��

��

��

����������������

������� �������� ������ ������������������������� ��������� ����������� � �!��������� ������������� �������������"�� ���� �!���"�#$��� �%� ��������#$�� "�&�'�����(�)��� �*��+�������*���$,���� ����� ����������!��$�,���� $���&��!-���� "�&�'�.�����%� ���/��� � ��� +�+�! ������0-�� �1'������ + �2�������

����� ����������������������

���������

��������

���������

��������

������������

�������������

������������ ���� ��������������� � ��� ����.��������� � �� �������� ��� ��� ����./�0�� '������%&'�� ��56�.���������������

$�� ����� ����������� ������ � ��� ���� � � ������������ ������� ��� E��������� ���� ������ � ��� ������������� ������� ���������������������� ������ �� ���� ��� �� ����� � ���� �� ���� �*������� ��C�H2L-�

/����

.�C.�M� �.��C����.��M�

.�C.+M.A�.DC.8,.G�.IC.JF.H

.�2C.��K.�+�.�AC$%&*+8�A-

.�DC.�F.+M.A =���������� �� ��������� ������������������������ � ������������

.�DC*.�M.+-F.A E�� ��������������������

.�8C$N.'*E4'*.�-ME4'*.+--�% ����� ������������������.�8�C�$!�����������*.����M.+���-�

./$1.�=/C�1.�=/�(1.�=/+1.�=/AC5'.�&$*O-(5.4'*O-� � '�� ����

������������� �������� � �� ����� �� ����� ������� ���������������������� ���

�������!����!��������$%&���'

'�� �� ���� � �������� ��� � �� ��� ��� ����� ������������� ������������������� ���������������'����������� �� ���������!����� ���*P�J2L�Q�2�QM�J2L-��'��� �������� ������ ���������� ���+ ������� ������������������� �

Page 174: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��J

������������������������� ������� �����������

�� ������������������������

(������������������

'����������� ������������ �������������������������56�.��%&'��./�0�� ��3440�'��������������������� �������56�.�����'����� � ������������ ���������$'.%&����<%$� ��1.�=/(�CC�� ��QR�'��������������������� �������� ����� �������3440�5�������� �������� ���� ������������������������������������� ����� �

�� ��������� ��� ������� �� �� ������� � ���������� �� �� ��������� �������� � ���������� ������� ������������������

)� �!���������

0������������������������������������ �������������&B��4.��&4'�� ��<4.��� �� ����� �������� ����������������3440���� ��������� ������������ ��������������56�.��%&'�� �./�0������ ������������������ ����� �$������������� ������� �3��� ����� ��� �����������% ������*3��� -�������� �������� � �����������������������3440��56�.��%&'�� ��./�0(2����!���� �����1�0$/ ���!������2����!���� �����'.#/

���� ������ ������ ������� �� ������

E�� ������� �������� ������������������ ������� ������������������ ����������������� ������������������� ������������������

%1�*.�2Q82-��&B�*?��@%=9<:RC�I�8-�4'41�B/$'%1�&4'�.�2��4'43�$'�.'

/����

%1�.�2RC�22��4'41�B/$'���.��C.�2RC�22%1�.����4'41�B/$''�� ����� ��� ��� ��������� � .�2RC�22� ��� ������������� �.���

*����������

3����������������������� ���� ���������������� ������������������56�.�� ��%&'��'����� ����� ���������������������

������ ������������ ������������ ������������� ������� �������

'����������3@&4'������� ������ ����� �S�������� �������������

/����

%1� ?=5@./$/'@=4B/@=�$T� 3@�&B� U3�2222V�4'41��5'@E0�&/

Page 175: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��H

������������������������� ������� �����������

#�����������������

/���� �������� ��� ����� �� �� ���������� ;� � � ������� ������������������������ ���������������������� ��� � ���� ������ �������;��� ��������������������������������������� ��������������������E���������� �������� ������������������ ������� ������������������ ����������������� ������������������� ������������������

#������������������&�� �����������'

'������ ���������W(X��������������� �������� ������������������� �� �������� ���������������������� ����!����������������������

�������������

'���� ��� �� ���������������������������� ����� ������������������������������ ��������������������������%������������������������������������������� ����� � ���������������� ��

#�����������!���������

� �������������������� �!" #����$%&'�(��(������)��������*�����*�'���+�,�����+����(����������*�������,��-�( ��������(��!�.%/��*������0

�0 �(�*���1)���(��&!."'��(�*��������(��2 #3"0 $���+���(�*���������+���� �������(�*��(���40 $�����5����+((���

�0 3�����*�������)2 #3"'���+�,����&!."

%�������������������� ������������ ��� �� ����� ��� ���������������� �����

%������������������� �� �������� ��������� ����� ������������������������

�������������� ��� ����� ����� ��

������������������ ���� �� ��� ����� � � ��

��� ��!� "�� � ��������#��� ��

$����"��� � ��"��

%����&�'� � ��(���� ���'

)�����'� � ���'

*��"��� "��

+��&�'� (���� ���'

,���'� �'

�-��..� /0� � ���1���# ����#������2��3�'��4

����55��.6��6��

�����.��65��.5� /�7��# � �����#���#�

��

����

���� � �� ���

��

��� � � ���

���

���� � � � � �

���� � � ���

� �

������ ���

���

���� �

����� �

������ ���� ��������� ��� ���� ����

Page 176: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���2

������������������������� ������� �����������

)�� ��������� ��� �")�$

'������ ���� ������� ����� ������������� ��������������

$� ���(

$�� ����(

�� ������������������������� �������,���� �� ������������ � ������������ �,���� ���2�����������

/����(

'������ ���� ��� ��������������� ���� ����������� ��� ���� ������ � � �� ���� � ���� ��� �� �������������������������� (

��������������� ��������������������

����������������������� � �������� �����

Page 177: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

����

������������������������� ������� �����������

1�����(

5�$/�*������� -�41��� ��� ����4'41�0�3/0��B/1�#0'��4'41�0�3/0 5�$/�*������� -�41��� ��� ����4'43�0�3/0��B/1�#0'��4'43�0�3/0

���������� ��

5�$/ ���������� �������������� �������� �4'41 Y����� �������� � ������������� ���� ���� �����4'43 Y����� �������� � ������������� ���� ����� ����0�3/0 B��� ���� �*��� ���� �����������-0�3/0( '�� ������������������ ���� ������� ���������� /������� ����������������� 5� ��� � 5� ��� ���������%&'B/1�#0' E��������������� � ���������������� ������ ��� ��������

'��5�$/������ �� ��������������� ��������������������� ������������������%&'�

'������������������������� ������������������������ ���� ���� �� ��� ���������������� ��� ��������� ����5�$/������ ��

% ������ �������� ��� ��������� � ����������� �����������B/1�#0'�� �������� ��� �������������� ������������� ���� �%�����B/1�#0'�� �������� ���� ������������������������� ���� ��������������� � ����5�$/������ ��

5�$/*������� -� 41� �� �4'41� 0�3/0�� +� �4'41� 0�3/0+� O� B/1�#0'�4'41�0�3/0 W�X�� ��W+X������������� ��� ���%���������������������� �C���*%&',�� ��� �-��������������� ����0�3/0�%���������������������� �C�+�*%&',�� ��� �-��������������� ����0�3/0+O���� ������������������� ����0�3/0

/����

B/1�%&'���.����.+���.A5�$/*��.�M��.+,��.A-�41�I��4'41�0�3/0��H��4'41�0�3/0+�B/1�#0'�4'41�0�3/0A0�3/0�(��2�<����0�3/0+(��2�<+��+0�3/0A(��2�<A��A

Page 178: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���+

������������������������� ������� �����������

����������������

%1,/0$/,/&B%1 ������������$���� ��� �+����, �����

044E,/&B044E ��������/ �������14.,/&B14. �������������5�� �����;6%0/,/&B;6%0/ ����� 0���� ���� �� ����� � ��

��� � ��������./E/�',#&'%0 ����������� 0���� ������ ����� ���� �

������

�+,�) �,�$-�+� �%1,/0$/,/ ���,��������������������� ����� ���� �����(%1�*������� -&82���&G2���/0$/&�+2���/&B%1

%�� ��� ���� ��� ��� ������� � ��� '.#/�� ���� ���� ����� ������������� ���� ������������������������� %�� ��� �� ����� � ��� ��� ������� �� � ��/0$/������������ �������������'6�/0$/���� ���� ����������

�������,�#�� ����������)��#

(����������+�"'��14.��������������������� ����������������� ������� ����������� ���������� ���'���������������������%&'�����

14.��������C�����������'4� ����&82���&G2���/&B14.

/ ����������������� � ������������������� ��������������������� ��������� ���������������� � ��

044E&82���&G2���/&B044E

'���� ���������������&5������������� ������ ��������������!� ��% �������� ������������������ ������������� �����$���� � �� ��������� ����� ������� ������ ������� ����� ������� ���������������'��� ����� ��� ��� ��� ���� ��� ������ ����������� ���������������������

Page 179: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���A

������������������������� ������� �����������

����

�����

��

����

�����

�������

�������

�������

������

���� �����

�����

��

��

�����

�����

�������

�������

����

�����

����

=�� �������� $���������

#�� �������������!������������ ����� ���������./�)�

'��;6%0/������������������������������ ��������� ����� ����������

;6%0/�������� &82���&G2���/&B;6%0/

#�� �������������!�������������������������"�#���

'���./E/�'��������������� ��� ��������� �� ������� �������� ����� ����������

./E/�'&82���&G2���#&'%0*������� -

$���� �����

5������������������� ����� ���� ������������ ��� ����������������J������������������ ��������� �����������������

"��������������

% �� �����������*������������ ����-���������������������� ���������������� ������������������������ ������������� ���� ��� ��� �������� � �������������������'������ ������� ���� ������������ ���� ������������������ ���������������

Page 180: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���D

������������������������� ������� �����������

3����� �������������������� ����� �������������0�������� ���������� �������������������

5�������������������������� ���������;� ������� ���������������������������������������� � ����� � ��������������������������� ��� ����������

1������������ ������������������������������������ ���������������� �� �����������

%�� ��� ��� � ���� �������� ��� ��� �� ������� ��� ��������������� ������������� ����

��������� ���������� �������������������������� ������������ � �������������������

5������������������� ���� � ����� � � �������� ������ ���������������B�� ���� ��� �������������������� ������������� ����� �������������

%����� ��������������������������������� ���������� ���������������������������� ���� ������� ���� ���&������������������ � ���������������� ��

�����������!��������

/����*/ �����������-

Z@&@044E@=E1044E%1�&4'�?E@$/�.56 S ������������

�2���H2�<2�[�2�1�222;6%0/�?��@%=9<:�QC��22

����H��<�2�1822 SB��� ������� [P8�1�22[8/&B;6%0/[�2

/0$/ S�3���������=$�*W&������ ������ ������������X-/&B%1?�@4#'9�:�C�� S ������� ������D�1+

/&B044E=A2

/�����*E�������� �����������!�� �������������-Z@&@;TE554#&'@=E1B/1�%&'�;TE554#&'14.�;TE554#&'�C2�'4��22�2��O/&B14.=A2

Page 181: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���8

������������������������� ������� �����������

��������!���������!0����������-� #)�+�-� #)�$

1�����

E.45�����B%$E041

;���� B%$E041� ��� ���� �� ����� ������� ���� �������������������������B%$E041�������������� ��������E.45������ ��% ��������������� ���������������������������������������������������

3������������������������������������B��������� ��������������� ����B%$E041������� ���������� ���������������������� ��������������%���������������������������������������������� ������B%$E041������������������ �������������������������� �������� ��%��������������� ������������ ����� ������� ��� � �������� ��� � ��� ���� ����������������������������������� �����������������������

�� ����������������� *)�+�� *)�$

1�����

E.45 ��� $3041E.45 ��� $304&

$3041 ���������� $� �������������� �41$304& ���������� $� �������������� �4&

�� ��������������������� �������!���!;����$3041�!������������������� ������������������������

/����(E.45��/������$3041����<�2./'

�� �������������������������� ���$3041��� ���� ���� �� ����������1��������������� ����������� ����������� ������ ���$304&���� ������ ���������������������� ���

Page 182: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���G

������������������������� ������� �����������

������

1���� ��� ��� �� � ��� �� ���� ���� �� ��������������� ��������������� ������������������������� ����� ����������� �

1����� ��� ���� ��� ������� ��� ������� � ��� ����� ���� � ������ ��� ������ ��� ������� ������� ���� ��� � ��� ������ �� ����� ��� ���� � ������������� ���������

#��������������1

" 3������������*�����������-B������������ ��������� ���������� �������������������������������� ����*3T$-�� �����7��� ��� �� ������ *34$-� � �� ���� ��� ��������������������������

" ���������������*�8D����8HH-��������� ��������� 7������ �� ������� ����������������� ��&5��������� ������������ ���8D�����8HH��'����������������������������������� ��������� ����7������ ��������������� ����

" �����������������E����������������*'.�&$��.4'���-��������� � ��� ������ &5,�������� � �� ���� ��� ������������������'������������������ ��� ������������� ���������

" �������������'����������������� �������7������ �������� � ���������� ���� ���� ������ ����� ����� ��

��

��

��

�����

��

��

��

��

! � � ( � � � �(�*���6�(5��

6���������

Page 183: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���I

������������������������� ������� �����������

+�������������2������������������

#�� ������������������������������������������������� ������������ ����������� ����� �������� �����������������

1����������(?E@E1.�=/��� �(����� ������������������

����������� �����������

3#4�+"�5�5��� �� ������ ����� ������� ����� ���� ��� ����� �� �� � ��� ����� � � �� ������������ ����������

?E@%1.�=/��� ��� �������� ����� ����������� ��������� ������8D�

?E@31.�=/������������ ������������ �������������� ����� ���� ������������������������� ���� �����������7������ �������� ������� ������ ���������������

?E@E1.�=/������ ����������� ����� ������� ������������������� ���� � �������7����� ��������� ����� ������������� ���������

?E@E1.�=/� �� ��� �� ��� ����� �� ������ ������������������������ ��'.�&$K�'.�&$��.4'K�.4'�$5�0/K�$5�0/�=%..4.K�=%..4.�����������������������

3#4�(�+"�5������������� �������������� ����� �������������������� ����� ������� ?E@31.�=/�� ��� ��������������������������?E@%1.�=/�� ���������������������������������?E@E1.�=/�

?E@�5'1.�=/� �������� ��� ������� ���� �������7������ ��

���

���

��

���

� ��

��

���

� ��

��

Page 184: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���J

������������������������� ������� �����������

?E@#%1.92: ������� ����822?E@#%1.9�: ������� ����8D?E@#%1.9+: ������� ����88?E@#%1.9A: ������� ����8G?E@#%1.9D: ������� ����8I

�� ����� ��� �22� ������� ��� ������ ���� �� � ��������������� ������������������ ������ ����������������������������������������7������ ��������������������

#������������6��������������3#4�*+"7�8

;���� ��� ��������� ��������������?E@#31.9 :���� ������������������������������������������������������ � ���������������� �� ������������������ �������822���8D������8HH�� �������� �

#������������6��������������3#4��+"7�8

'�����������7������ ����������8D�� ����8HH��� ��������� ���� ��������� ������������������� ������������� ��������������?E@#%1.9 :�

8����������������*?E@#%1.92:�� ���?E@#%1.9D:-� �K���8��� � ������������� ���,��822�*� ����,���-�� ���8D�� ����8I�,����������������� �������

Page 185: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

���H

������������������������� ������� �����������

� �����������!"�#�$����!��$��!

�<&�=/*>'.�&$�/.$/��<%$>-�<9�<&�=/*>$'.%&�>-:$E%*��� �� ����-%$�<%$*������������ ����-

�<&�=/ ��� 5� ����� � � � ���� ���� �� ��� � � ������ ������

�< ������������� �������������� ������%$�<%$ ������� 5����� ����������������������

����������

�9$�5�%�������������������������� ���������������� � ���� ���������������� ���� � �

� �9� %������� �� ������������ ��������� ������������������ ������� ����� ������ � �� ����� ����� � ���� � ��?E@�<&<,������� ���������� ����� �����������

Page 186: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

��+2

������������������������� ������� �����������

Page 187: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

ALARMS AND MESSAGES

H 1

Machine Alarms 6000 - 7999These alarms will be triggered by the machines.There are different alarms for the different ma-chines.The alarms 6000 - 6999 normally must beconfirmed with RESET. The alarms 7000 - 7999are messages which normally will disappear whenthe releasing situation is finished.

H: Alarms and Messages

PC MILL 50 / 55 / 100 / 105 / 125 / 155Concept MILL 55 / 105 / 155

6000: EMERGENCY OFFThe EMERGENCY OFF key was pressed.Remove the endangering situation and restartmachine and software.

6001: PLC-CYCLE TIME EXCEEDINGContact EMCO Service.

6002: PLC - NO PROGRAM CHARGEDContact EMCO Service.

6003: PLC - NO DATA UNITContact EMCO Service.

6004: PLC - RAM MEMORY FAILUREContact EMCO Service.

6005: OVERHEAT BRAKEMODULMain drive was braked too often, large changesof speed within a short time. E4.2 active

6006: OVERLOAD BRAKE RESISTORsee 6005

6007: SAFETY CIRCUIT FAULTAxis and main drive contactor with machineswitched off not disabled. Contactor got stuck orcontact error. E4.7 was not active during switch-on.

6009: SAFETY CIRCUIT FAULTDefective step motor system.A running CNC program will be interrupted, theauxiliary drives will be stopped, the reference po-sition will be lost.Contact EMCO Service.

6010: DRIVE X-AXIS NOT READYThe step motor board is defective or too hot, afuse or cabling is defective.A running program will be stopped, the auxiliarydrives will be switched off, the reference positionwill be lost.Check fuses or contact EMCO service.

6011: DRIVE Y-AXIS NOT READYsee alarm 6010.

6012: DRIVE Z-AXIS NOT READYsee alarm 6010.

6013: MAIN DRIVE NOT READYMain drive power supply defective, main drive toohot, fuse defective.A running program will be stopped, the auxilliarydrives will be switched off.Check fuses or contact EMCO Service.

6014: NO MAIN SPINDLE SPEEDThis will be released, when the spindle speed islower than 20 rpm because of overload.Alter cutting data (feed, infeed, spindle speed).The CNC program will be aborted, the auxilliarydrives will be stopped.

6019: VICE TIME EXCEEDThe electric vice has not reached a stop positionwithin 30 seconds.The control or the clamping device board aredefective, the vice is stuck. Adjust the proximityswitches of the stop position.

6020: VICE FAILUREWhen the electric vice is closed, the signal"clamping device clamped" of the clamping deviceboard has failed.The control, the clamping device board or thewiring are defective.

A 2007-05

Page 188: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

ALARMS AND MESSAGES

H 2

6022: CLAMPING DEVICE BOARDDEFECTIVE

The signal "clamping device clamped" isconstantly released, although no command hasbeen given.Replace the board.

6024: MACHINE DOOR OPENThe door was opened while a machine movement.The program will be aborted.

6027: DOOR LIMIT SWITCH DEFECTIVEThe limit switch of the automatic door is displaced,defective, wrong cabled.Contact EMCO service.

6028: DOOR TIMEOUTThe automatic door stucks, the pressured airsupply is insufficient, the limit switch is displaced.Check door, pressured air supply, limit switch orcontact EMCO service.

6030: NO PART CLAMPEDNo workpiece inserted, vice cheek displaced, con-trol cam displaced, hardware defective.Adjust or contact EMCO service.

6040: TOOL TURRET INDEX FAILUREAfter WZW procedure drum pressed down by Z-axis. Spindle position wrong or mechanicaldefect. E4.3=0 in lower state

6041: TOOL CHANGE TIMEOUTTool drum stucks (collision?), main drive notready, fuse defective, hardware defective.A running CNC program will be stopped.Check for collisions, check fuses or contactEMCO service.

6043-6046: TOOL DISK POSITION FAULTPosition error of main drive, error of positionsupervising (inductive proximity switch defectiveor disadjusted, drum allowance), fuse defective,hardware defective.The Z axis could have been slipped out of thetoothing while the machine was switched off.A running CNC program will be stopped.Contact EMCO service.

6047: TOOL DISK UNLOCKEDTool drum turned out of locked position, inductiveproximity switch defective or disadjusted, fuse de-fective, hardware defective.A running CNC program will be interrupted.Contact EMCO service.When the tool drum is turned out of locked position(no defect), act as following:Turn the drum into locking position manuallyChange into MANUAL (JOG) mode.Turn the key switch. Traverse the Z slide upwards,until the alarm disappears.

6048: DIVIDING TIME EXCEEDEDDividing head stucks, insufficient pressured airsupply, hardware defective.Check for collision, check pressured air supply orcontact EMCO service.

6049: INTERLOCKING TIME EXCEEDEDsee alarm 6048

6050: M25 AT RUNNING MAIN SPINDLE������ ������� ���������� �������������� � ���������������������������������������������������������������� ������ ���������������

6064: DOOR AUTOMATIC NOT READY������ ����������������������������

������������������������ ������������������������ �� ������� ���������������������� ���������������������� �������������������������

���� � ���������������������������������������������������������������� ������ �������������������

6069: CLAMPING FOR TANI NOT OPENWhen opening the clamping pressure switch doesnot fall within 400ms. Pressure switch defectiveor mechanical problem. E22.3

6070: PRESSURE SWITCH FOR TANI MIS-SING

When closing the clamping pressure switch doesnot respond. No compressed air or mechanicalproblem. E22.3

6071: DIVIDING DEVICE NOT READYServo Ready Signal from frequency convertermissing. Excess temperature drive TANI orfrequency converter not ready for operation.

Page 189: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

ALARMS AND MESSAGES

H 3

6072: VICE NOT READYAttempt to start the spindle with an open vice orwithout clamped workpiece.Vice stucks mechanically, insufficient compressedair supply, compressed air switch defective, fusedefective, hardware defective.Check the fuses or contact EMCO service.

6073: DIVIDING DEVICE NOT READY������ ���� �����������������

����� �������������������������

���� � ���������������������������������������������������������������� ������ ����������������������� �������

�������������� �������

6074: DIVIDING TIME EXCEEDED������ ������ �������������������� ������

���� ���������������������� �������������������������� �������� �����������!�����������

���� � ���������������������������������������������������������������� ������ ��������������� "��������������������!

�������������� ���������#$�%���������

6075: M27 AT RUNNING MAIN SPINDLE������ ������� ���������� �������������� � ���������������������������������������������������������������� ������ ���������������

7000: INVALID TOOL NUMBER PRO-GRAMMED

The tool position was programmed larger than10.The CNC program will be stopped.Interrupt program with RESET and correct theprogram.

7001: NO M6 PROGRAMMEDFor an automatic tool change you also have toprogram a M6 after the T word.

7007: FEED STOP!The axes have been stopped by the roboticsinterface (robotics entry FEEDHOLD).

7016: SWITCH ON AUXILIARY DRIVESThe auxiliary drives are off. Press the AUX ONkey for at least 0.5 sec. (to avoid accidentallyswitching on) to switch on the auxiliary drives.

7017: REFERENCE MACHINEApproach the reference point.When the reference point is not active, manualmovements are possible only with key switch atposition "setting operation".

7018: TURN KEY SWITCHWith NC-Start the key switch was in position"setting operation".NC-Start is locked.Turn the key switch in the position "automatic" torun a program.

7020: SPECIAL OPERATION MODE ACTIVESpecial operation mode: The machine door isopened, the auxiliary drives are switched on, thekey switch is in position "setting operation" andthe consent key is pressed.Manual traversing the axes is possible with opendoor. Swivelling the tool turret is not possible withopen door. Running a CNC program is possibleonly with standing spindle (DRYRUN) and SIN-GLE block operation.For safety: If the consent key is pressed for morethan 40 sec. the function of this key is interrupted,the consent key must be released and pressedagain.

7021: INITIALIZE TOOL TURRETThe tool turret operating was interrupted.No traversing operation is possible.Press tool turret key in JOG operation. Messageoccurs after alarm 6040.

7022: INITIALIZE TOOL TURRET !see 7021

7023: WAITING TIME MAIN DRIVE!The LENZE frequency converter has to beseparated from the mains supply for at least 20seconds before you are allowed to switch it onagain. This message will appear when the dooris quickly openend/ closed (under 20 seconds).

7038: LUBRICATION SYSTEM FAULTThe pressure switch is defective or gagged.NC-Start is locked. This can be reset only byswitching off and on the machine.Contact EMCO service.

7039: LUBRICATION SYSTEM FAULTNot enough lubricant, the pressure switch is de-fective.NC-Start is locked.Check the lubricant and lubricate manually or con-tact EMCO service.

Page 190: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

ALARMS AND MESSAGES

H 4

7040: MACHINE DOOR OPENThe main drive can not be switched on and NC-Start can not be activated (except specialoperation mode)Close the machine to run a program.

7042: INITIALIZE MACHINE DOOREvery movement and NC-Start are locked.Open and close the machine door to initialize thesafety circuits.

7043: PIECE COUNT REACHEDA predetermined number of program runs wasreached. NC-Start is locked. Reset the counter tocontinue.

7050: NO PART CLAMPEDAfter switching on or after an the vice is neither atthe open position nor at the closed position.NC-Start is locked.Traverse the vice manually on a valid end position.

7051: DIVIDING HEAD NOT LOCKED!Either the dividing head is in an undefined positionafter the machine has been switched on, or thelocking signal after a dividing process is missing.Initiate the dividing process, check, respectivelyadjust the proximity switch for locking.

7054: VICE OPEN������ ���������������� ���������When switching on the main spindle with M3/M4alarm 6072 (vice not ready) will be released. ������ �����

7055: OPEN TOOL CLAMPING SYSTEMA tool is clamped in the main spindle and thecontrol does not recognize the corresponding Tnumber.Eject the tool from the main spindle when thedoor is open by means of the PC keys "Strg" and" 1 ".

7056: SETTING DATA INCORRECTAn invalid tool number is stored in the settingdata.Delete the setting data in the machine directoryxxxxx.pls.

7057: TOOLHOLDER OCCUPIEDThe clamped tool cannot be positioned in the toolturret since the position is occupied.Eject the tool from the main spindle when thedoor is open by means of the PC keys "Strg" and" 1 ".

7058: RETRACTING THE AXESThe position of the tool turret arm cannot beclearly defined during the tool change.Open the machine door, push the tool turretmagazine backwards to the stop. Move the millinghead in the JOG mode upwards to the Z referenceswitch and then traverse the reference point.

7270: OFFSET COMPENSATION ACTIVE !Only with PC-MILL 105Offset compensation activated by the followingoperation sequence.- Reference point not active- Machine in reference mode- Key switch in manual operation- Press STRG (or CTRL) and simultaneously 4This must be carried out if prior to the tool changeprocedure spindle positioning is not completed(tolerance window too large)

7271: COMPENSATION FINISHED,DATASAVED !

see 7270

Page 191: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

ALARMS AND MESSAGES

H 5

Page 192: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

ALARMS AND MESSAGES

H 6

6000: EMERGENCY OFFThe EMERGENCY OFF key was pressed.The reference position will be lost, the auxiliarydrives will be switched off.Remove the endangering situation and restart ma-chine and software.

6001: PLC-CYCLE TIME EXCEEDINGThe auxiliary drives will be switched off.Contact EMCO Service.

6002: PLC - NO PROGRAM CHARGEDThe auxiliary drives will be switched off.Contact EMCO Service.

6003: PLC - NO DATA UNITThe auxiliary drives will be switched off.Contact EMCO Service.

6004: PLC - RAM MEMORY FAILUREThe auxiliary drives will be switched off.Contact EMCO Service.

6008: MISSING CAN SUBSCRIBERThe SPS-CAN board is not identified by thecontrol.Check the interface cable and the power supplyof the CAN board.

6009: SAFETY CIRCUIT FAULTDefective step motor system.A running CNC program will be interrupted, theauxiliary drives will be stopped, the reference po-sition will be lost.Contact EMCO Service.

6010: DRIVE X-AXIS NOT READYThe step motor board is defective or too hot, afuse is defective, over- or undervoltage frommains.A running program will be stopped, the auxiliarydrives will be switched off, the reference positionwill be lost.Check fuses or contact EMCO service.

6012: DRIVE Z-AXIS NOT READYsee 6010.

6013: MAIN DRIVE NOT READYMain drive power supply defective or main drivetoo hot, fuse defective, over- or undervoltage frommains.A running program will be stopped, the auxilliarydrives will be switched off.Check fuses or contact EMCO Service.

6014: NO MAIN SPINDLE SPEEDThis alarm will be released, when the spindlespeed is lower than 20 rpm because of overload.Alter cutting data (feed, infeed, spindle speed).The CNC program will be aborted, the auxiliarydrives will be switched off.

6015: NO DRIVEN TOOL SPINDLE SPEEDsee 6014.

6016: AUTOMATIC TOOL TURRET SIGNALCOUPLED MISSING

6017: AUTOMATIC TOOL TURRET SIGNALUNCOUPLED MISSING

In the tool turret that can be coupled, the positionof the coupling and uncoupling magnet ismonitored by means of two proximity switches. Ithas to be made sure that the coupling is in therear stop position so that the tool turret can get tothe next tool position. Equally, during operationwith driven tools the coupling has to be safe inthe front stop position.Check and adjust the cables, the magnet and thestop position proximity switches.

6021: COLLET TIME OUTDuring closing of the clamping device the pressureswitch has not reacted within one second.

6022: CLAMPING DEVICE BOARDDEFECTIVE

The signal "clamping device clamped" isconstantly released, even though no commandhas been given. Replace the board.

6023: COLLET PRESSURE MONITORINGThe pressure switch turns off when the clampingdevice is closed (compressed air failure for morethan 500ms).

PC TURN 50 / 55 / 105 / 120 / 125 / 155Concept TURN 55 / 105 / 155

Page 193: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

ALARMS AND MESSAGES

H 7

6024: MACHINE DOOR OPENThe door was opened while a machine movement.The program will be aborted.

6025: GEARBOX COVER NOT CLOSEDThe gearbox cover was opened while a machinemovement. A running CNC program will beaborted.Close the cover to continue.

6027: DOOR LIMIT SWITCH DEFECTIVEThe limit switch of the automatic door is displaced,defective, wrong cabled.Contact EMCO service.

6028: DOOR TIMEOUTThe automatic door stucks, the pressured airsupply is insufficient, the limit switch is displaced.Check door, pressured air supply, limit switch orcontact EMCO service.

6029: TAILSTOCK QUILL TIME EXCEEDThe tailstock quill does not reach a final positionwithin 10 seconds.Adjust the control and the stop position proximityswitches, or the tailstock quill is stuck.

6030: NO PART CLAMPEDNo workpiece inserted, vice cheek displaced, con-trol cam displaced, hardware defective.Adjust or contact EMCO service.

6031: QUILL FAILURE

6032: TOOL CHANGE TIMEOUTsee alarm 6041.

6033: TOOL TURRET SYNC ERRORHardware defective.Contact EMCO service.

6037: CHUCK TIMEOUTThe pressure switch does not react within onesecond when the clamping device is closed.

6039: CHUCK PRESSURE FAILUREThe pressure switch turns off when the clampingdevice is closed (compressed air failure for morethan 500ms).

6040: TOOL TURRET INDEX FAILUREThe tool turret is in no locked position, tool turretsensor board defective, cabling defective, fusedefective.A running CNC program will be stopped.Swivel the tool turret with the tool turret key, checkfuses or contact EMCO service.

6041: TOOL CHANGE TIMEOUTTool drum stucks (collision?), fuse defective, hard-ware defective.A running CNC program will be stopped.Check for collisions, check fuses or contactEMCO service.

6042: TOOL TURRET OVERHEATTool turret motor too hot.With the tool turret a max. of 14 swivel proceduresa minute may be carried out.

6043: TOOL CHANGE TIMEOUTTool drum stucks (collision?), fuse defective, hard-ware defective.A running CNC program will be stopped.Check for collisions, check fuses or contactEMCO service.

6045: TOOL TURRET SYNC MISSINGHardware defective.Contact EMCO service.

6046: TOOL TURRET ENCODER FAULTFuse defective, hardware defective.Check fuses or contact EMCO service.

6048: CHUCK NOT READYAttempt to start the spindle with open chuck orwithout clamped workpiece.Chuck stucks mechanically, insufficient pressuredair supply, fuse defective, hardware defective.Check fuses or contact EMCO service.

6049: COLLET NOT READY����&'()

6050: M25 DURING SPINDLE ROTATION*����$+,�������� ���� ������������ ��������-� ������� !�������"��������������������.

6055: NO PART CLAMPED����� ������ ������ ��� � ����� ����� � ��� ���� ��������� ���������������������������������� ������� ��������������������� ������������������������������� ��������� ���������������������������������� ������ � ������� ����� �"� ������ � �����"����������� ������

6056: QUILL NOT READYAttempt to start the spindle or to move an axis orto swivel the tool turret with undefined tailstockposition.Tailstock is locked mechanically (collision), insuf-ficient pressured air supply, fuse defective,magnetic switch defective.Check for collisions, check fuses or contactEMCO service.

Page 194: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

ALARMS AND MESSAGES

H 8

6057: M20/M21 DURING SPINDLE ROTATION*���� $+'/$+0� ���� ��� � ��� ���� ����� ��� �� �����-� �������� !�������"��������������������.

6058: M25/M26 DURING QUILL FORWARD�������������������� ��������� �� ��������������$+,���$+&����������������������� ������� ������� �

6059: C-AXIS SWING IN TIMEOUTC-axis does not swivel in within 4 seconds.Reason: not sufficient air pressure, and/or me-chanics stuck.

6060: C-AXIS INDEX FAILUREWhen swivelling in the C-axis the limit switch doesnot respond.Check pneumatics, mechanics and limit switch.

6064: AUTOMATIC DOOR NOT READYDoor stucks mechanically (collision), insufficientpressured air supply, limit switch defective, fusedefective.Check for collisions, check fuses or contactEMCO service.

6065: LOADER MAGAZINE FAILURELoader not ready.Check if the loader is switched on, correctly con-nected and ready for operation and/or disableloader (WinConfig).

6066: CLAMPING DEVICE FAILURENo compressed air at the clamping deviceCheck pneumatics and position of the clampingdevice proximity detectors.

6067: NO COMPRESSED AIRTurn the compressed air on, check the setting ofthe pressure switch.

7000: INVALID TOOL NUMBERPROGRAMMED

The tool position was programmed larger than 8.The CNC program will be stopped.Interrupt program with RESET and correct theprogram.

7007: FEED HOLDIn the robotic mode a HIGH signal is at input E3.7.Feed Stop is active until a low signal is at E3.7.

7016: SWITCH ON AUXILIARY DRIVESThe auxiliary drives are off. Press the AUX ONkey for at least 0.5 sec. (to avoid accidentallyswitching on) to switch on the auxiliary drives (alsoa lubricating pulse will be released).

7017: REFERENCE MACHINEApproach the reference point.When the reference point is not active, manualmovements are possible only with key switch atposition "setting operation".

7018: TURN KEY SWITCHWith NC-Start the key switch was in position"setting operation".NC-Start is locked.Turn the key switch in the position "automatic" torun a program.

7019: PNEUMATIC LUBRICATION MONITOR-ING!

Refill pneumatic oil

7020: SPECIAL OPERATION MODE ACTIVESpecial operation mode: The machine door isopened, the auxiliary drives are switched on, thekey switch is in position "setting operation" andthe consent key is pressed.Manual traversing the axes is possible with opendoor. Swivelling the tool turret is possible withopen door. Running a CNC program is possibleonly with standing spindle (DRYRUN) and SIN-GLE block operation.For safety: If the consent key is pressed for morethan 40 sec. the function of this key is interrupted,the consent key must be released and pressedagain.

7021: TOOL TURRET NOT LOCKEDThe tool turret operating was interrupted.NC start and spindle start are locked. Press thetool turret key in the RESET status of the control.

7022: COLLECTION DEVICE MONITORINGTime exceed of the swivelling movement.Check the pneumatics, respectively whether themechanical system is jammed (possibly aworkpiece is jammed).

7023: ADJUST PRESSURE SWITCH !During opening and closing of the clamping devicethe pressure switch has to turn off and on once.Adjust the pressure switch. This alarm does notexist any more for versions starting with PLC 3.10.

7024: ADJUST CLAMPING DEVICEPROXIMITY SWITCH !

When the clamping device is open and theposition stop control is active, the respectiveproximity switch has to feed back that theclamping device is "Open".Check and adjust the clamping device proximityswitch, check the cables.

Page 195: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

ALARMS AND MESSAGES

H 9

7025 WAITING TIME MAIN DRIVE !The LENZE frequency converter has to beseparated from the mains supply for at least 20seconds before you are allowed to switch it onagain. This message will appear when the dooris quickly openend/ closed (under 20 seconds).

7038: LUBRICATION SYSTEM FAULTThe pressure switch is defective or gagged.NC-Start is locked. This alarm can be reset onlyby switching off and on the machine.Contact EMCO service.

7039: LUBRICATION SYSTEM FAULTNot enough lubricant, the pressure switch is de-fective.NC-Start is locked.Check the lubricant and lubricate manually or con-tact EMCO service.

7040: MACHINE DOOR OPENThe main drive can not be switched on and NC-Start can not be activated (except specialoperation mode)Close the machine to run a program.

7041: GEARBOX COVER OPENThe main spindle cannot be switched on and NCstart cannot be activated.Close the gearbox cover in order to start a CNCprogram.

7042: INITIALIZE MACHINE DOOREvery movement and NC-Start are locked.Open and close the machine door to initialize thesafety circuits.

7043: PIECE COUNT REACHEDA predetermined number of program runs wasreached. NC-Start is locked. Reset the counter tocontinue.

7048: CHUCK OPENThis message shows that the chuck is open. Itwill disappear if a workpiece will be clamped.

7049: CHUCK - NO PART CLAMPEDNo part is clamped, the spindle can not beswitched on.

7050: COLLET OPENThis message shows that the collet is open. It willdisappear if a workpiece will be clamped.

7051: COLLET - NO PART CLAMPEDNo part is clamped, the spindle can not beswitched on.

7052: QUILL IN UNDEFINED POSITIONThe tailstock is in no defined position.All axis movements, the spindle and the tool turretare locked.Drive the tailstock in back end position or clamp aworkpiece with the tailstock.

7053: QUILL - NO PART CLAMPEDThe tailstock reached the front end position. Tra-verse the tailstock back to the back end positionto continue.

7054: NO PART CLAMPEDNo part clamped, switch-on of the spindle islocked.

7055: CLAMPING DEVICE OPENThis message indicates that the clamping deviceis not in clamping state. It disappears as soon asa part is clamped.

Page 196: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

ALARMS AND MESSAGES

H 10

Page 197: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

ALARMS AND MESSAGES

H 11

8000 Fatal Error AC

8100 Fatal init error AC������ 1 ��� ������� ������ �������������������� ��������� � ����!

����"���������#$�%"���������������

8101 Fatal init error ACsee 8101.

8102 Fatal init error AC����)0'0�

8103 Fatal init error AC����)0'0�

8104 Fatal system error AC����)0'0�

8105 Fatal init error AC����)0'0�

8106 No PC-COM card found������ ��!�%$�������� � ��������������-���

���� ���.� ������ $� �� ����"� ��2���� ����� �������� ����

2�����

8107 PC-COM card not working����)0'&�

8108 Fatal error on PC-COM card����)0'&�

8109 Fatal error on PC-COM card����)0'&�

8110 PC-COM init message missing������ 1 ��� ������� ������ �������������������� ��������� � ����!

����"���������#$�%"���������������

8111 Wrong configuration of PC-COM����)00'�

8113 Invalid data (pccom.hex)����)00'�

8114 Programming error on PC-COM����)00'�

8115 PC-COM packet acknowledge missing����)00'�

8116 PC-COM startup error����)00'�

8117 Fatal init data error (pccom.hex)����)00'�

8118 Fatal init error AC����)00'"������ �������� �� �$������

8119 PC interrupt no. not valid������ �������� �������� �������� � ���������� ������ 3� ����������� �������� ������� �����*� !

���4,��������� ����-��������,"5"0'"00"�0+"�6"�(�� ��,.�� ��� ��������� ������� *� � ���

8120 PC interrupt no. unmaskable����)004

8121 Invalid command to PC-COM������ 1 ��� ������������������������� ������ �������������-��������.7� ��������������

�� ��� ������ ��� � ��������"� ������ �#$�%"���������������

8122 Internal AC mailbox overrun������ 1 ��� ������� ������ �������������������� ��������� � ����!

����"���������#$�%"���������������

8123 Open error on record file������ 1 ��� ������� ������ �������������������� ��������� � ����!

����"���������#$�%"���������������

8124 Write error on record file������ 1 ��� ������� ������ �������������������� ��������� � ����!

����"���������#$�%"���������������

8125 Invalid memory for record buffer������ 1 �������� �� �$"������������������� � ������ ��������������"�������������������������

�� ����� �$"�������������������

8126 AC Interpolation overrun������ #���� �������� ����������������� ��� ������ 8������ ���� �������������� �*� � ���

����������������� ��������������������

8127 Insufficient memory������ 1 �������� �� �$ ������ ����� ����� ������"� �������� �������"

��������������������������� ����� �$�

8128 Invalid message to AC������ 1 ��� ������� ������ �������������������� ��������� � ����!

����"���������#$�%"���������������

8129 Invalid MSD data - axisconfig.����)0+)�

8130 Internal init error AC����)0+)�

8130 Internal init error AC����)0+)�

8132 Axis accessed by multiple channels����)0+)�

���������������

Axis Controller Alarms

Page 198: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

ALARMS AND MESSAGES

H 12

8133 Insufficient NC block memory AC����)0+)�

8134 Too much center points programmed����)0+)�

8135 No centerpoint programmed����)0+)�

8136 Circle radius too small����)0+)�

8137 Invalid for Helix specified������ *� ������������������������ ��� ��

�� ����� �������������������� �������� ������ ������������� �

8140 Maschine (ACIF) not responding������ $���� ������� ��� ������ ������ 8������ ������ ����� ����

8141 Internal PC-COM error������ 1 ��� ������� ������ �������������������� ��������� � ����!

����"���������#$�%"���������������

8142 ACIF Program error������ 1 ��� ������� ������ �������������������� ��������� � ����!

����"���������#$�%"���������������

8143 ACIF packet acknowledge missing����)0(+�

8144 ACIF startup error����)0(+�

8145 Fatal init data error (acif.hex)����)0(+�

8146 Multiple request for axis����)0(+�

8147 Invalid PC-COM state (DPRAM)����)0(+�

8148 Invalid PC-COM command (CNo)����)0(+�

8149 Invalid PC-COM command (Len)����)0(+�

8150 Fatal ACIF error����)0(+�

8151 AC Init Error (missing RPG file)����)0(+�

8152 AC Init Error (RPG file format)����)0(+�

8153 FPGA program timeout on ACIF����)0(+�

8154 Invalid Command to PC-COM����)0(+�

8155 Invalid FPGA packet acknowledge����)0(+����������������� ���13������-� ����#$�%�8������.�

8156 Sync within 1.5 revol. not found���� )0(+� �� 9��� ��������� ����� -� ����� #$�%8������.�

8157 Data record done����)0(+�

8158 Bero width too large (referencing)���� )0(+� �� 9��� ��������� ����� -� ����� #$�%8������.�

8159 Function not implemented9������ � 1 � ����������� �������� ��� ��� � �

�����������

8160 Axis synchronization lost axis 3..7������ �������� ������������������"�������� ���!

����� �������� ������ �������������� ����� �

8161 X-Axis synchronization lostStep loss of the step motor. Causes:- Axis mechanically blocked- Axis belt defective- Distance of proximity detector too large(>0,3mm) or proximity detector defective- Step motor defective

8162 Y-Axis synchronization lostsee 8161

8163 Z-Axis synchronization lostsee 8161

8164 Software limit switch max axis 3..7������ �������������������������� � ������ �����������

8168 Software limit overtravel axis 3..7������ �������������������������� � ������ �����������

8172 Communication error to machine������ 1 ��� ������� ������ �������������������� ��������� � ����!

����"���������#$�%"���������������������� ���� ����!������ �"���� ��!���������� ����������� ��������

8173 INC while NC program is running ������ 8��� ���� ������ ����� ��� ���� �� ����

������������������������

8174 INC not allowed������ ���������� ��������������� ���� � ������ *����� ������������������� ����� ���������

���������

8175 MSD file could not be opened������ 1 ��� ������� ������ �����������������������9������ ���� !

��������� "���������#$�%"���������������

8176 PLS file could not be opened����)05,�

8177 PLS file could not be accessed����)05,�

8178 PLS file could not be written����)05,�

Page 199: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

ALARMS AND MESSAGES

H 13

8179 ACS file could not be opened����)05,�

8180 ACS file could not be accessed����)05,�

8181 ACS file could not be written����)05,�

8183 Gear too high������ ������������������������� ���������������

����� ��

8184 Invalid interpolaton command

8185 Forbidden MSD data change����)05,�

8186 MSD file could not be opened����)05,�

8187 PLC program error����)05,�

8188 Gear command invalid����)05,�

8189 Invalid channel assignement����)05,�

8190 Invalid channel within message����)05,�

8191 Invalid jog feed unit������ ��������� ������ ������������������

������ �����:%;������� ����� ������ %��������������������������#$�%�

8192 Invalid axis in command����)05,�

8193 Fatal PLC error����)05,�

8194 Thread without length������ ������������� ���������� ��������

��� ������������������ ����� ����� ������ ��������������������� �����

8195 No thread slope in leading axis ������ ������������������

8196 Too manny axis for thread ������ �����������+����������������

8197 Thread not long enough������ ��������� ����������

*������� ���� ����� ������������������������� ������������ ������������������������ ���������������������������

������ < ������ �� ��������� �������� ��������� ����� �������� �-;0.�

8198 Internal error (to manny threads)����)05,�

8199 Internal error (thread state)������ 1 ��� ������� ������ �������������������� ��������� � ����!

����"���������#$�%"���������������

8200 Thread without spindle on ������ 8������ ���� ���

8201 Internal thread error (IPO)����)044�

8201 Internal thread error (IPO)����)044�

8203 Fatal AC error (0-ptr IPO)����)044�

8204 Fatal init error: PLC/IPO running����)044�

8205 PLC Runtime exceeded�������1 �������� ����������������� ��

8206 Invalid PLC M-group initialisation����)044�

8207 Invalid PLC machine data����)044�

8208 Invalid application message����)044�

8212 Rotation axis not allowed����)044�

8213 Circle and rotation axis can't beinterpolated

8214 Thread and rotation axis cant't beinterpolated8215 Invalid state����)044�

8216 No rotation axis for rotation axis switch����)044�

8217 Axis type not valid!������ 8������ ����� ����������������������

������� �������� ��������� � � ������ 8��� ���� ��� ���� � �� ������� ���� �� ���

������������������ �����

8218 Referencing round axis withoutselected round axis!����)044�

8219 Thread not allowed without spindleencoder!������ ������������ "�������������������� ���� ��

���������������� ����������� ������

8220 Buffer length exceeded in PC sendmessage!����)044�

8221 Spindle release although axis is nospindle!����)044�

8222 New master spindle is not valid������ ����� ������������������ ������� �������

��� �������� ��������������������� ���� ������ �������������� ���� ������

8224 Invalid stop mode����)044�

Page 200: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

ALARMS AND MESSAGES

H 14

8225 Invalid parameter for BC_MOVE_TO_IO!������ ��������� ����� ��� ����������������

����������������� ������ ����������������� ��� �� ������� ���� � ����� ���������� �����

������ ����� ���� ���������������� �� ��������������� ������ ��

8226 Rotary axis switch not valid (MSD data)!������ ���� � �������� ��� ���� ���� �� ����� �

�����������

8228 Rotary axis switch not allowed whileaxis move!������ ���������������������������� ��������

������������� ���������� ����� ������ 8������������������������������� �

8229 Spindle on not allowed while rotary axisis active!

8230 Program start not allowed due to activespindle rotation axis!

8231 Axis configuration (MSD) for TRANSMITnot valid!������ ��� �������� ����������������������� ��

8232 Axis configuration (MSD) for TRACYLnot valid!������ ���������� ����������������������� ��

8233 Axis not available while TRANSMIT/TRACYL is active!������ ������� � �� ���� ������ ����� ��� �

����������� ���� ����/��������

8234 Axis control grant removed by PLCwhile axis interpolates!������ 1 ��� ������� ������ =����������������������� ��� ����#$�%�

8235 Interpolation invalid while axis controlgrant is off by PLC!����)+6(�

8236 TRANSMIT/TRACYL activated while axisor spindle moves!����)+6(�

8237 Motion through pole in TRANSMIT!������ 1�� ��� �� ������� �� ���� ������ ���

���� �����>'�?'�� ��� ����� ������ ������������������ ������ ��

8238 Speed limit in TRANSMIT exceeded!������ ������������ ������ ��������������

�������� �����>'�?'��1 ������������������������������������"����������������������������������������������������������

������ ���������������������8�������������������!����� ����� �������� � � � *� � ��"����� ������������ ��/�� ���������� �����/� � ��'�+������"� ������������������������������������������ ������������ ����>'�?'�

8239 DAU exceeded 10V limit!������ 1 ��� ������� ������ 8�������������������� ����� ���������� ���

����������������#$�%�

8240 Function not valid during active trans-formation (TRANSMIT/TRACYL)!������ ����:�� ��1��������� ��������� �

������������ ���� ������ �>/��� ������ �������� ����������������

8241 TRANSMIT not enabled (MSD)!������ ��� �������� ����������������������� ��

8242 TRACYL not enabled (MSD)!������ ���������� ����������������������� ��

8243 Round axis invalid during activetransformation!������ 1����� �������������������������������

���� ���� ����/�������

8245 TRACYL radius = 0!������ *�� �������� �������"������������'����

����� ������ ������������������

8246 Offset alignment not valid for this state!����)+64�

8247 Offset alignment: MSD file writeprotected!

8248 Cyclic supervision failed!������ ���� ���� ����� � ����� ���� ����� �

������������ ���������� ������ 8�������������������� ���� ���������� ���

����������������#$�%�

8249 Axis motion check alarm!����)+64

8250 Spindle must be rotation axis !����)+64

8251 Lead for G331/G332 missing !������ ����������� ��������������� �������������

���� ����� ���� ��� ������ �� ���� ��������� �����

������ ����������������� ���������������������������� �����

8252 Multiple or no linear axis programmedfor G331/G332 ! ������ �������������� ���� ���������

8253 Speed value for G331/G332 and G96missing !������ ������� �������������� ���������� ������ ��������������� �������

8254 Value for thread starting point offsetnot valid!������ ����������������� ��� ����������� �������

������ ����'���6&'@� ������ ������������������������ ��� ��������

Page 201: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

ALARMS AND MESSAGES

H 15

8255 Reference point not in valid softwarelimits!������ ���� ������ ��� �� �� ���� ��� � ���� ��

���������������������������������� ������ ����������������� ����� ���� �*� � ���

8256 Spindle speed too low while executingG331/G332!������ =��� � ����� � ���� ��� ���� ������ ���

������������������������ �������������� ������������������������������� ���� ��������

������ ������� ���� ������� � ������� ������ ���������������������������� �

8257 Real Time Module not active or PCI cardnot found!������ ��������� ���������������������������

��1������� ������������� ����� �A��� ������ ����������������#$�%�

8258 Error allocating Linux data!����)+64�

8259 Current thread in sequence not valid!������ % �� ����� �� �� ������� � � ��B�� ��� ���

��� ������������������������;66� ������ �����������������

8261 Missing thread in sequence !������ �� ����������� ������� ���� �� ���

���������������������� ���B�� ��"���� ���������������� ������� �����������8#��C #�=�%D��� -.� ����� ���� ��� ���� ���������

������ ����������� ����������������� ������������ ���B�� ���� ���������������

8262 Reference marks are not close enough !������ ��������� ���������� ������������������

��� ����������� ����������������������� ������ ���������������� ���� �����#$�%�

8263 Reference marks are too close together!����)+&+�

22000 Gear change not allowed������ ;���� ����� ��� �� ��� � ���� ��� ���� ��

������� ������ 8���������� ����� ���������������������

��� ��

22270 Feed too high (thread)������ ��������������������/������ "�3������

���������������)'E������������� ������ ������������� "� ������������� ����

��� �������������������

Page 202: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

ALARMS AND MESSAGES

H 16

Page 203: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

���

������������� ���������������������� ��������������������������������������������������������� �������������������������������������

����� ����� ��������������������������������������� � �����������������

���������������������������������������������������������������� �����!��������������������������"��#����������������������������!�����������������!�����$������%&!�

'������ �����������(��"��#��������������'����(� ����������������"��#�����������������������!�

����� ����� ������������������������������������������ � �����������������

)�������� ������ ����� ���$��� ��� �������!� "�� #��� $�� ���� ������ �������� ��� ������ �� ������ �*+",#��'�-,'.",+/0���� ������������������������������������������������������������������� �������� 1213������$������������!�������40)��!����56��78�"�9���������0:: �;�

'������ "��#��������������'����(� ����������������"��#�����������������������!�

����� ����� �������� ��!��� �������������������������� "���������� � �����������������

�2���������������������������<���:������������������=���#���!0���!��������$����!�������������!�>��������������������������������������$�����$����������������(����������)���������(����������������������������������������������������$����!����!����������������������������������������������$����(��(�������#������������#����������������������$��

'������ �����������(��)����������!��������������"��#������������'����(� 0������!�����������������������������!���!!���������������!��������������������������������������

��$�#�����%���#&����������������$����(������$����������������������������������!���������������2��'�����������&�����������������%��!�������>����������?�������������@��)������$������������������������������?������@����������$�������������$����!!���!���������������������������!��������������������������!���������������!��������������������������������'�#� ���(��'��������������!����

��� � ����� �������� ���!��� ��������������������� "���������� � �����������������

�2���:������������������<����������������������=���#���!�?A���7@ ���������������$��������������!�������������� ��������!�>�����(������������������������������������������$��������������������������������������������������������������������$����(�

'������ �����������(��)����������!��������������"��#�������������������������������"��#������������'����(� 5�!���������������������������$����������

����������������'�#� ���(��'��������������!����

��(�� ����� �������� ��!��� ����������������������� "� ������������������2���������������������������<���:������������������=���#���!�?A���7@B�����������������!������������$������������������(�$�����������������������? ���2������������������������������$��������������������!����C2�������������������������%����C���0:�< �7�=3��0:D� 2�2����� 2�<@� ��������������$�����������������!������������!���������

'������ �����������(��)����������!��������������������������������!��>����"��#������������'����(� ����������������������������������������������������!����

+�����������<; 11�)*�+,-.-'+.-�/�0<; 21�)*�+,-.-'+.-�/�������<; 1�)*�+,-.-'+),/�%<; <1�)*�+,-.-'+),/����������������������������������������������������������7��������������������&�E������2�������������������������%����C�?0:�< �7�=3��0:D� 2�2���� 2�<@�������������������2����������������������������������������������(����$��1����������$������������������������������������"��#������������������!����

������������ �

��� !" #

Page 204: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

���

��( � ����� �������� ��!��� ����������������������� "���������� � �����������������

�2���������������������������<���:������������������=���#���!�?A���7@ �����������!�����������������������������!���������������������������!�����������������������������������������!���������!�������������

'������ �����������(��)����������!��������������������������������!��>����"��#������������'����( �@���������������������������������������

�@�������1����������?�������������@�@�����������������������������$��F2G����@�����������������������������$�������!���������@�0����$�������������������������$�������!�������=<= 1�2*345365+.-�/�+6�57,6�B�6#�����������������"��#������������������!����

��("� ����� �������� ��������8����8����������257��������������������� � �����������������

�2���:�����������������)������������������!����������������������������(�������������+�,H�:,+�D".+,0.++I,:6/�9#������������H�:���������������������������!�����������������������������!���

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������������

'����(� +��(��������!�������������������"��#������������������!����

��("� ����� �������� ��#��������%����������257���#���������������� � �����������������

�2���:������������������������(��������������������!���������������������$�������(�������������!��������������������������������������������������������H�:�������

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������������

'����(� +��(��������!�������������������"��#������������������!����

��("� ����� �������� ��257�#�������%���#���������������#���������� � �����������������

�2���:�����������������5������������� J�)����H�:���������������������0)#'�������������������������$��������������������K������1�

J�0���!�������������������������������������$������������������������������������(�!���������H�:����������!��$��� �����������(�!���������H�:�����������������������������������������������������������������������������������?�������������������������$�����/BB"@����������������������������������!������������0)#'����������������

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������������

'����(� +��(��������!�������������������"��#������������������!����

��(" ����� �������� ��257���������#��%������������������ � �����������������

�2���:�����������������������������������������������$������H�:�������������H�:��������$��������$���(���������������

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������������

'����(� +��(��������!�������������������"��#������������������!����

��("" ����� �������� ����%���#�257�#�������#��#���������� � �����������������

�2���:����������������� ������!��������������������������������������������������

5������������� J�)��������!�������������������$���������������������������������J�:������������������������������������$����������������������!�������������!����J� ������!�����������������H�:�������$���������������������������!�������

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������������

'����(� +��(��������!�������������������"��#������������������!����

��("9 ����� �������� ��257�#���������������������������� � �����������������

�2���:�����������������)������H�:���������������������!���������������������������!�������$�������(�������������!��������)������H�:�������������������������������������������!�������

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������������

'����(� +��(��������!���

Page 205: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��$

���������$�����������������������������������������H�:���������������������!�����������!��������������������������!�������������H�:����������������������"��#������������������!����

��("� ����� �������� �����������������������257���������� � �����������������

�2���:��������������������������������������������������������������H�:���������������������������!�����������!��������!����������������������H�:���������������������������!�����������!��������������

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������������

'����(� +��(��������!��������������������"��#������������������!����

��("( ����� �������� �����������#����������#��#�����257���������� � �����������������

�2���:�����������������)����H�:�������������������K������������������7������?F2=3���F<=3@��������������������������!���������������!������������������F =<���F =1�������������������������������$��

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������������

'����(� +��(��������!���� ��������!�����!��������������J�)���������������������������!�������������H�:������J����$�����������������������?������$�����F =1���(��������F =<@J�#�������������������������(�����F = ���F =2�J�5�������������������������!����������������������������������������"��#������������������!����

��(9� ����� �������� ���������#������������������%��#���������������:���������� � �����������������

�2���:���������������������� ����������������������������������������������������������������������������������$��������������������������?0 @�������!�������������$������?����������5 �752G@�������������(����!�������������? �������@��.����L������������������������������!������������(������(�!�������K����������������������0��������?0 �7�0L@�� ��������������������������?�'�@����������������������F= ���F=2�����!������� �����������$������������������������������5;�?!�����(�$����@�����5 G�?�����$����@����������$�������������������0����

'������ �����������(��)����������!��������������������������������!��>���"��#�������������"��#�������������������������

'����(� :����������!������'������F= %F=2����!���������������������������������� ���������������������"��#������������������!����

��(9� ����� �������� ��#����������������#������������#����������������������� � �����������������

�2���:����������������� ���E:����������������M�?����������������������������������!���������������$����!������@��������������������������������������������������������$�����������������$����!��������)����������������������������������K��������������$������������������������

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������������

'����(� �����������������!�����������(�������!�����!������������������������������������������������������������������$����������$�����?/����������������������������������������K������������� ���!��������������������������������������������������������(�������������������@��)�����������������������$�������$����!�������$��������������212=1��/'�*.+.5;�/.+�$6�4+7,*�4��?���������<@���������!�����������������������������������������������������������������(������������������������"��#������������������!����

��(9 ����� �������� �&�����%����������#������������������������������������ � �����������������

�2���:�����������������#������������������������������������F= %F=2���(���(�������������������������������F��������F11?��������$����@���F1 �?����@������$���)���������������F= %F=2������������������������������F N���F L����������������)��������(����$���������������������������������������������������������$������������������!��������������

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������

'����(� �����������"����!�������������������������������������������������������������������������������"��#������������������!����

��(9" ����� �������� �&�#����%����������#�����������������������������8���������� � �����������������

�2���:�����������������0��������������������������������������F=1�������(�������������������������������F��������F11�?�������$����@���F1 �?����@������$���)���������������F=1������������������������������F N���F L����������������

Page 206: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��%

)�� �� ����(�� ��$������ �� ����� ���� ����� �������� ��� �� ������ ���� ����� ���� ���$������ ����� ���������!� �������������

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������

'����(� �����������"����!�������������������������������������������������������������������������������"��#������������������!����

��(99 ����� �������� �&�#���������%����������#��������������%���4*�'����������������������������������� � �����������������

�2���:�����������������H�������$���!��������������������������������4*�'�����������!���������������������������������������������������������������������(�$����������������)��������������������������������������������F= %F=2������������������$���?"/'+���9/" @�������������������������$�������������������(������������������#������������H���9/" ��������������������������������������������������!����������������?����������������������������@�� ������!�������������������!�������������������������������������$������������������������������$�������)�������������������������������������������������������!�������������!���������������!����������

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������

'����(� 5��������������������6����������������������!��������������������$���������������������������������������������������������!�������?��!����������$����!��$�������8����������������@�� ��������!��������������$�������J�#����������������$�������J�)���������������������J�#������������������$���"/'+����������������"��#������������������!����

��(9� ����� �������� �&�#�����#����%����������#��������������%���4*�'���������������#�#��������������� � �����������������

�2���:�����������������/������������������������������������������������!�������������������������������������������)���������������������������������������������������������������������������$������)�����������������������������������������$��F=1������������������$���?"/'+���9/" @�������������������������$��������������!��������������������#������������H���9/" ����������������������������������������������������������������������������������������$��� ������!���������!�����!��������!����������������������$����!���������������������������$�������)�������������������������������������������������������!�������������!���������������!����������

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������

'����(� 5����������������������6������������������!�����������������������������������������������������������������������$���������������� ��������!���������������$�������J�0������������������������J�)���������������������J�#������������������$���"/'+����������������"��#������������������!����

��(9( ����� �������� �&�#���������������������������������������#���������������������%���������� � �����������������

�2���:�����������������)�������������!����������������������?F N��F 3���F L@������������������(������������������������������������������F=1�

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������

'����(� )��������������������������������������������������������������!���������������������!����������������������������������������������������������������������������������������������������"��#������������������!����

��(9� ����� �������� �����%�������#���������%�����������������%����������������������� � �����������������

�2���:����������������� ����������������������������������?���������������@��������!�����������!�������������������)������������$��������������������������������������������������������������(��������������������������������������������#��������!��������������$���������������!����������!��� ��������������������������������������������$�����������������������$��������������������!���)����������������$�����$��������!�����������������������������������������������������������(�������������������

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������

'����(� .����������������������������������������������������������������������������!�����!�����������������"��#������������������!����

��(�� ����� �������� ����������!������������������������������������������� � �����������������

�2���:�����������������

Page 207: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��&

H������$��������������������������������(����������������������������������������������������������������������������������������������������������

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������

'����(� /���������������������������������������!�����������������������"��#������������������!����

��(�� ����� �������� �� ������8� ���8� ������� ���� ���� ���%����� ������������ ����%� ����� ��#������������

���������� � ������������������2���:����������������� ���������������������������������(������������������(���������������

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������

'����(� ��+��(��������!����2��+��(������������<����������������#:62������$������H���#:62�����������!�������������������������!������������������������������!�����������������������������������(���������������������$����!�����������������������"��#������������������!����

��(� ����� �������� ���������������������������������������������������1��:���������� � �����������������

�2���:�����������������0��� �� ���� �����������!����� ���$�� ��� ������ ����������� ��������� �������� �� ��������� �� ������������� ������ ������� >���� )�� ���� �!���� ����� ������� ������ �������� ������������� �� �����������������������������������������������������

'������ �����������(�'����(� J� �������$�������������������������������������������������������������$�����

J�+��(������������!��������������(J�.����������������������������������(J�5�!�����0/B������������������������������(��"�����������������������������(�

��(�" ����� �������� ��#�������������������������%��������#����������������������� � �����������������

�2���:����������������� ��� ������ ������ ������ ���� ���$�� ��� ������ ����������� ���� ������!� ���� ����� ��� ���������!� �����������������������������������������������������!������� �������������������������������������� !�����(� ���� �� ���$������ �������� ��� ������ ��� �����!� ���� �� ������ ���� ��� ���$�� �������������������?��!��G7���������������@�����������!�����������������������

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������

'����(� +��(��������!��������������������"��#������������������!����

��((� ����� �� ������ �� ����� ��� ����� �8�� #�� ��� ����� ��� ��������� ����� ����%� ����� ��#������������

���������� � ������������������2���:����������������� ����(�������������?������������������@��������������(���������!�������������������������������������B�� ������������ ������!������������ ����&������ �������������������������(� ������������� �������������������������(����������������������)��������!����������������!�������?���������$���������@���������������$����!���������������!��������(������������������������������������$����!���������!�����������������������������������������������������������$������������!����������

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������

'����(� +��(��������!��������������������"��#������������������!����

��((" ����� ��������������#������������������������������� ����������� � �����������������

�2���:����������������� �����������������������!��������������������!�������������������!����!����!��$�����������������!������>�������!��$���������(�����������K�����������!����������������!���>�������!��$�����������������

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������

'����(� +��(��������!�������������������"��#������������������!����

��((� ����� �������� ���!��� ������������!�����������������������������%���������� � �����������������

�2���:������������������<����������� ������������������������������������K����������������������������������!�����(������H����. 20B�����������������������!������������������ �� ����������!������O�������������� �(���������������

Page 208: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��#

?�. 20B���. <0����. <0B���. <0BB@������!�����(������������������������������'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#���������������������

����'����(� +��(��������!����

����������������"��#������������������!����

��((( ����� �������� ���������#�������������&�������8��������������������������������������������� � �����������������

�2���:����������������� ������������������������������������������$�����������������������������������������������������(������������������. �/+,+�D".+,#.55'�##,:6/�9#�

'������ �����������(�)����������!�����������������������������'��!��������"��#������������"��#������������������������

'����(� J�+��(��������!���J�+��(������������J���������������#:62������$������H���#:62�����������!�������������������������!������������������������������!�����������������������������������(���������������������$����!�����������������������"��#������������������!����

���((� ����� �������� ��������������������������%��������#����������������������� � �����������������

�2���:�����������������)�� �� ����������!� ���� �� ������������� ���$�� ��� ������ ���������� ?������ ��!������� �(� ���� ����� �!�����������������(@��������������!������*#�,# /5,��,# /5'�����������������������!���������������������� ������� ������� �$������� ����� ����� ��� �������� �(� ���� ����� ���� ����� ?��������� �� ������������������������������@� ��������������!�����$����������"��6���(����������������������

'������ �����������(��"��#��������������������������'����(� J��������������!�������"��6�����#����

J�+��(��������!���J�#��������!������*#�,# /5,��,# /5'����B�6#�������������������������������(��"�����������������������������(�

������ ����� �������� ��!��� ���������������8��!������������ � �����������������

�2���������������������������<���:�����������������H���������$��������������������������������������������������!�����(�����������������������������������)����!�����(������������$���(���������$��������������!���������������������������E�����!���M�����������!�����!������������!�����(������:�������������5/#��������(��������������������������������������(�����������������!�������������������������������(���������������!��������������������������������� ���������$�������������������K��������������������!�����'/ ����������������������������������������)��!�����(�����������������������!������������ ���������������(��������������������������$������������2��������������������(�������������

'������ �����������(��)����������!��������������������������������!��>����"��#������������'����(� �������������!��������������������������!��������!�����(��������������!���������!�����?��!�����

H�) 5@������������$�����������������E!�����(����M������������������"��#������������������!����

����9 ����� �������� �������������������������������!��������������������������� � �����������������

�2���:�����������������)��������(������������������������!��������!�����(�����������������������������!������������$�������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� +��(��������!���

����������������'�#� ���(��'��������������!����

����� ����� �������� �����������#�����#��#���������� � �����������������

�2���:����������������� ����������E'�$���������������M�?����FLG���FL;@����E'!�������!M�?����F<< %F<<2@������������!������������!���������������������������������������������������������$����B�����������������+0�211L1�)-�<+<6=+.5�'63+�)-�<����$������������������������������(�����6'.���������������!���������������!���������������������������������������������������������

'������ �����������(��)����������!�������������������������������!��>����"��#������������'����(� 5������������������������+0�211L1��)-�<+<6=+.5�'63+�)-�<>?@��?�����������������������������������@

����������������"���������!����������������������������F������������!��������������K��������������� ��������� ���� �� ��� �������� ��� ������� ����� ��� ��$���� ���� �� ������� ������� �� +0� <G111�)-�<+5��-A�+'*+.5�$5;>?@��?��������������������������������������@��B������������������������!���������������?����������������� ���2@���������+0�211N1�5;�*�=+.5�$5;+/�6<>?@��?��������������������������������������������@��

Page 209: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��!

����������������"��#������������������!����

����� ����� �������8��!��0���#�� �����#��#���������� � �����������������

�2��������������������������'�$�����������������������!����������������!������(������������������������%��������-��$�����������(����%����������������������������������������������$�������

'������ �����������(��)����������!�������������������������������!��>����"��#������������'����(� ��������������!�������������������!������=<<11��##)F",B��0,5�','�4,#/.'����������(�

����������������"��#������������������!����

����� ����� �������� ���#���������������#���������� � �����������������

�2���:�����������������)�����������(�����������������������(�������������F11�?��������$����@������$�� ���B�$�������������������!�������

'������ �����������(��)����������!�������������������������������!��>����"��#������������'����(� 5�!��������������������������������������������(���

A� &� ������������������������������7���������$�������������������=���P %��Q�A�"�����A�(&� ����������������!���������������������=���P��%��Q���P�%��Q�A�9&� ����������������!������������$������������������������������=���P��%��$����Q�A��&� ����������������!���������������!������������������������P�%��Q��)�������$����������������������#���#:����������������"��#������������������!����

����� ����� �������� ��%�����8���������������!��� ����1������������ � �����������������

�2���:������������������<������"�����$����(������������!��������������������!�$����(�������������������������>���

'������ �����������(��)����������!�������������������������������!��>����"��#������������'����(� �����������������$����(���������������<21;1�.5+)*�+5;+B6,*�

����������������"��#������������������!����

����� ����� �������� �����������#������!�������������������� � �����������������

�2���:������������������������������������!���������������������������������������������������!�����-��$��������$����(������������������$���������������������������������������������?��!��FLG@�

'������ �����������(��)����������!�������������������������������!��>����"��#������������'����(� +��(�������!����������������������������������������!����������

����������������"��#������������������!����

���(� ����� �������� ���������!������#��#���������� � �����������������

�2���:�����������������H�����������������!������������$�����$������A�������������������������������������������!��������������������!������������������������!���������!�������������#�P��%��Q������������������������)�������������7�������+0�21 11�<-5.6'63+5;+<6=>C�?@!�?�����������������������������������������������������@��������������������!�����P#���!Q������������������������������G���������������������������������

�� �

� ��

���� ����

� � ����� � ����

� ��

��

=⋅

⋅ π

'������ �����������(��)����������!�������������������������������!��>����"��#������������'����(� �������������������������!������������������7�������������������21 11�<-5.6'63+5;+<6=���������������

���������������������"��#������������������!����

����� ����� �������� ��������8����8�������������������%���������������������������������#���

���������� � ������������������2���:�����������������:�������2�������������!����������������������������������&����������������������������D�$=C�3�<E���������������������������������$���������!��������������$�������������������������21211�$=3�<+.5;�/.+</..F+7,*�4��

'������ �����������(��)����������!�������������������������������!��>����"��#������������'����(� +��(������������������ ���������������������������������������(��������������������������������

�������7�������������������21211��$=3�<+.5;�/.+</..F+7,*�4�� ?����(�������������������%���@���������������������������(�����������������������"��#������������������!����

����� ����� �������� �&�#���������%���������������#���������������%�������������� � �����������������

�2���:�����������������"������������������������������������������2����������������������?��!��������!@���������

Page 210: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��'

J� �������������!��������������������������������J� ����������$�����������������������J�������������!�����������������J� ��������������������������(����������������$����!��������������������������

'������ �����������(��)����������!�������������������������������!��>����"��#������������'����(� ������������������!����������!���������$����������������������!�������������������(������������

�������7�������+0��$=3�<+.5;�/.+</..F+7,*�4��������(����������������������������������������!��������������������"��#������������������!����

����� ����� �������� ������%������������#���������������������#���������� � �����������������

�2���:�����������������)��FL;������$��������������������!���������������������#�������!

'������ �����������(��)����������!�������������������������������!��>����"��#������������'����(� 5�!�����������������!�������������#���P�%��Q�����������������������FL;��B���������������FLN��������$��

������������������������������������������������������������(�����������������������"��#������������������!����

����� ����� �������� ��!����%�%�����8������������!������������ � �����������������

�2���:�����������������H������$������������������������$������������$����(����������������$�������������!�������������������������������(���������

'������ �����������(�'����(� 0$�������"������������$�����������?��!��<@��������������������������������������������������������������

������������������������ ��������������������������$���������������!�������$����(��������������������������(��"�����������������������������(�

����� ����� �������� �������������������������������%���������:���������� � �����������������

�2���:����������������� ���!$������$�������������!����������������������������

'������ �����������(��)����������!��������������"��#������������'����(� +��(��������!����

����������������'�#� ���(��'��������������!����

����" .�%������������������������������������%�G�������� ������������ ����������� � �����������������

�2���:����������������� �����������������������������������������������

'������ )����������!���������������$������?���������������@�������������!���R������!������������������!�����������������������������!����!���������������?��!������������������!�@�

'����(� ��������������������'�#� ���(��'��������������!����

��� � ����� �������� ��������������8����������#������������%������������������� � �����������������

�2���:����������������� �����������������������$����(����������������!�������������������F11��F1 ��F12���F1<�� �������� ��!������(���������(� ����� ������ ����������������� ����� ���������������(� �������� ?���� ��������!��������������������������@�

'������ �����������(��)����������!��������������"��#������������'����(� )������������������������!������(��������������������������������!�������������������������

����������������'�#� ���(��'��������������!����

��� � ����� �������� �����������������#����������%������������������� � �����������������

�2���:�����������������)�����������������������������������������������!�����������!���������$���J�B���������J�/$�������!���������������J�H��!�����������

'������ �����������(��)����������!��������������"��#������������'����(� �����������������$�������������������������������������������������$���������

����������������'�#� ���(��'��������������!����

��� � ����� �������� ����������������������������������#���������� � �����������������

�2���:�������������������������������!�����������������������������������(�����/" 5'/"�����������������������������������������������!������?���������������%��������!���@��B����!�����������������������������!�������������������������������(�����D��. ���������������������(������

'������ �����������(��)����������!��������������"��#������������'����(� 5�!����������(�����D��. ���������!��������$���������!��������������!�����������!��������!���

��������!��������?��(�����/" 5'/"@�����������������'�#� ���(��'��������������!����

Page 211: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��(

��� ����� �������� ������������������������������������������������������ � �����������������

�2���:����������������� �������������������������������$�������������!�������������������������<������������$�����������������������������!������� �����������$����(��������������������

'������ �����������(��)����������!��������������"�����!������������������:��������!��������"��#������������'����(� )�������������>���������������������������������$���������������������������<�"�������������$������

�������������������������������!�����������������������'�#� ���(��'��������������!����

��� " ����� �������� ������8���������������������������������������������� � �����������������

�2���:�����������������0���!���������!��������?���$���������������(�����/" 5'/"@�����������������������������������������������������������B���$��(�������������������������?������������!������@�������������������������������������

'������ "����������������������!�������������������(��)����������!��������������"��#������������'����(� :��������������������������$�������������������������������������������������������������� ��������

��!����������������$�����������"�����������������(����<�������!��������������" 11�0�B� �:"�+�, �P<1�� Q�B����$�����������������������������$������<1�������!������� ������������������? @����������K�����(�����������������'�#� ���(��'��������������!����

����� ����� �������� ���##���� ���������#�����#�8���������� � �����������������

�2���:������������������<���#���������!������������+�������������?���������(���@���(���(������!���������� �����"�������������������������������������������!����?��!��D���� ����B���������7����������F�����+��������@�

'������ �����������(��)����������!��������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

���������������������������������������J�'��$����������"����!�������������������������������������?������� ��� �������������������$�������!�����������������@�J���������������������������?��!��������������@�����������$��������7�������$�������?������(����������(�������������������������������������$��������������������������!��������!�����������������������(@�����������������"��#�����������������������!�

����� ����� �������� ���##���� ��##�����8����������#������������������ � �����������������

�2���:������������������<���#���������!��������������B����������������(�����������������������(�������������(����������0)"������?����������������������!��������������������(��������������������������������@�

'������ �����������(��)����������!��������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

���������������������������������������� �����!����������������������������$�����$�����������:������������������������������������������7������(������������������"��#�����������������������!�

����� ����� �������� ����������������##������#�����������������#���������� � �����������������

�2���:�����������������4�������������(��������R)�R��R��R��R0�R��R�)�R��R���R��R��"R��R��5R��R���"R��R���5R��"������������������������������������������������������������(���� ���5�!�����!�F�������������������������������������������$��������������(�����)������������������������������������������(����������������������������������������!������������!���" 1�F12�DG1�I;1�-@<�D��E�S<1�B 11��������������������������0��

'������ �����������(��)����������!��������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

�������������������������������������������(���7������������������������(� ������������������������ ���������������� ����5�!�����!F��������������������"��#�����������������������!�

��� � ����� �������� ���%���#������������#�����8����� ���������� � �����������������

�2���:������������������<���#���������!)����(������������������(�����������������!����������������<�����!�����?'�������5�!�����!�F����@�?�@�����1�A��� ���A���2���2�A���<���< ���������������1�?����������!�����@����������������������������������������!����������������������!��������)��������(���������������!�������� ���������������!���������������������?�� �����2�����<

Page 212: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

���

@�'������ �����������(��)����������!��������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

�������������������������������������������������������"��#�����������������������!�

���"� ����� �������� ��!������� ����������#�����8��H5;-�H���������� � �����������������

�2���:������������������<���#���������!�����������#�����(������������������������!�������������������������������������$���������������(���E�D)#M��B������������������(����5/������������������������������������������������>��������������������������������������$��������������D)#��(����H������������!���(�������(�������������������D)#��(���������������DP��Q��B�P��Q��B0P��Q��B6P��Q��)5P��Q��/4'�P��Q��5/P��Q��5/#P��Q��5/#�P��Q��������"G�0�B�)" �)"B��0�T �O��������������������������(�������O������������������������M2;� ; M"G�0�B��D)#�)"B��0�T �O�������

�" 1�5/6I�5/PDQ�?1� �1�2�1�<@�5/PIQ�?22�<<�==@�U5/P)"B��0Q�? �2�<@

'������ �����������(��)����������!��������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

���������������������������������������������������������!����������������������������������!$���������5�!�����!�F��������������������"��#�����������������������!�

����� ����� �������� ������A���������������#�����#�8���������� � �����������������

�2���:����������������� ���F���������������������������������������!���������$�������!���������������8��!�#��������G�8��!#������/��(���A����������(������!����������������F�!����� ������������������!���������������(�������$��� ������������������(���������7�(����������!�F����������)����$�����F�������������������!��������������������"�����������������������������!���������$������������?�������$�����������!����@�F�B."� )/"#�#(����������!�F��������� �����=���F�!���"�7�(����������!�F��������� G�������F�!���

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

����������������������������������������'����(��������������(������������������������������������F���������������!������������(������������K���������������������"��#�����������������������!�

���(� ����� �������� ��������8��8��!G#�����A������������������ � �����������������

�2���:������������������8��!�#�����A���������������������������������������������!���������������������������������������*�8����(����������!�F����������(������!��������������"�������� ���F��������������� �����=���F!���������(����������!�

'������ �����������(��)����������!��������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

��������������������������������������������(>��"������������������������F���������$�����$�����"�����������������������"��#�����������������������!�

����� ����� �������� ���8��!���������!�� ���������� � �����������������

�2���:������������������<���#�����������������������������������������!����������������������������� �������������������������������������������������������������������������������(������������������ �" 1�)B�F/ /B�����O������������������&����������!V��������2�" 1�0�B�)" �4�')�G" �D�4�')O������������������!��������D�����4�')�$�������

'������ �����������(��)����������!��������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

��������������������������������������������(>���������������������������������������������(����������!$���������5�!�����!�F��������������������"��#�����������������������!�

����� ����� �������� ���!���#�������� ���������� � �����������������

�2���:�����������������

Page 213: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

����

�<���0����������������������������� ��� ��!������� ������� ���� ����� ���������O� �� ����������� ���� ������� �� ��� ������ ��� ����� ���������������������������(�����������/�������!������������������������ '�B/B�?������!�����������������@��������������$������������������?��������@�

'������ �����������(��)����������!��������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

���������������������������������������5�!����������������������������������������������������"��#�����������������������!�

����� ����� �������� ���������������� ����������������������� � �����������������

�2���:������������������<���"�������������� ������������������������.�5,,�������������������������������������������������������������������������(��������������B���������������!�����!�������������������������������������5������������ ���������������������$��������������+��66�����!����������������������������������������������?������������@�

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

���������������������������������������5�!����������������������+��66���������������������������������������"��#�����������������������!�

����� ����� �������� ���8��!��������������#���������� � �����������������

�2���:����������������� ���������������!������������������������������������!��������������$�����(����������!�F�����������������F �) 1�D21�I<1�B 111��������������������������������������!������������������������

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

�������������������������������������������������������������������������������������������������!�����!���K�������������������������"��#�����������������������!�

����� ����� �������� �&�2�����������A�������������������������������� � �����������������

�2���:����������������� ���F����������!�������������������������������������������"�!��������������������(���������������(���������������������� �����F�������������A�9C�A���H���!�����������������������������A���C�A���C�A����5�����!�����!������������������A���#�����������������������$����������'53'=-=*C��'*)=-=*�������������������!����������!��F=�B 111�+ 11����+���������������������F=������

'������ �����������(��)����������!���������������������������'����(� 5�!����F���������(������������������

����������������"��#�����������������������!�

���"� ����� �������� ��!������� ���������#���������������������� � �����������������

�2���:������������������<���#��������������������������������)��������������!�������������������������������������������������(����������������������������$�����

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

��������������������������������������� ��������(���������������������$�������������!��������������������"��#�����������������������!�

���9� ����� �������� ���������� �������������������#�����8����������� � �����������������

�2���:������������������<���#���!�?$����!�������@ �������� �(�������� ��� ������������� ���� ��K������������ ?����� ������������ ����������� �� �� $�������!�����@��������� ����������������" 1�0�B�)" �/ /" �0�B�# ')"FP NQ��""�" 2�0�B�)" �+�D�

Page 214: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

����

"G1�+�D���/ /�A��""���������2�4��������!�����" 1�0�B��D)#�:/-'" �0�B�)" �/ /�"G1�/ /���:/-'

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

��������������������������������������������������������������$�����������������������������K���������������������������������������������"��#�����������������������!�

����� ����� �������� ���������%�����!�##���������� � �����������������

�2���:����������������� �����!���������������������$�������������������$��������!��������������$���(������������������(�������������������(���

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

�����������������������������������������������$���������������������������������(����)������$�������������!���������������!����������������������������������������(�����!����������������������' ���L�3N;�G=<�2 1���������' ���L�3N;�G=<�2 1�4��������!��)" �F�'��2�< �7� 4��������!��'��6���2���������2�����

����������������"��#�����������������������!�

���(� ����� �������� ���#������ �#��#�����#�8���������� � �����������������

�2���:������������������<���#(���������� ����(�������������������������!������������(����������������������$����������!�����"������������7�����������������(�����������������������������������������������������?���@��!��������������$����������(��������������������������������������!�������������������?�����!����@�������������(��������������� ��������������������7��������(�����?��������$�������@�������������������?������0)"���������������F�������@�

'������ �����������(��)����������!���������������������������'����(� ����(����������(�����������������!�������������(���� ����(�������������������������������������

����������������!�������!�������!���������� ��� �����2����(������������!$�����������������������������������"��#�����������������������!�

����� ����� �������� ���������������������������� ���������� � �����������������

�2���:������������������<�����������������/������� �����!� ������ ���� ����!� �� ��K������ �� ����(� ���� ����(� �������� ������ ���!� ��(� ���� ���������������������" 1��'F���4�'��7�?�7�4�':�@�O�������������" 1��'F���4�'��7�7�4�':�O������V

'������ �����������(��)����������!���������������������������B�������� ��������������������(����������!����(�����!�������������������� ��� ���$��������(������������(���������!��������������������"��#�����������������������!�

����� ����� �������� ��%�����������8��5335F�����������8�#���������������� � �����������������

�2���:���������������������(�����$�����������(���# ')"F���(��������������� 7���������������������������$������������������27���������

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

�������������������������������������������������������(�����������������7�������������(���������������27�������������(�����������(�����������������������������������������������������"��#�����������������������!�

����� ����� �������� ���8����� ������������#���������� � �����������������

�2���:������������������<���#(��������������������

Page 215: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

���$

����(�������������������������0�B�����������������������������������J�������������(�������������?��!�����$���������������@J�����������������(�������������!������������?��!���������!������(�@�

'������ �����������(��)����������!���������������������������'����(� +�������������!��������

J������������������������������������������������������������������$����!�����(����?������!�������������������!����@�����������(�����������J�����������������(���K�����������������(�����������(�����������������������������������(��(����!������!������������������$������������������������"��#�����������������������!�

����� ����� �������� �������� ������������������ � �����������������

�2���:������������������<���#���!�����������������J�)�����������������$����������(���# ')"F�����������������������������>����������� 11������������J�)�������������������������������������������!�����������������!$���$�������

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

���������������������������������������J�#�����������������!����$������������������������!����2�����!�J�0��������!�������!�$����������������������"��#�����������������������!�

����� ����� �������� ������8�������� �������������������������� � �����������������

�2���:������������������<���:���(��������H��������>�!����������!�����$���������$����������(���# ')"F����������3�������$�������������������(���������0�B�# ')"FP3Q�/ /���M�:�R-GGWR:1111 R0�BM

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M���������������(�5'/F'�+��/''�� �� ��

����������������������������������������)�����������������������������!��������������������������������(�����������������(�������(��������!������������������!�������������������������������� �����������������������8�����������������(���������������������������$���������������������"��#�����������������������!�

��� � ����� �������� ���!�#������������� �������������������������� � �����������������

�2���:������������������<���-�����������������������!����������������(����������������������������������������������������������������������$������������(��������������>��������������(��� �����������������������������������(����������������������� ��(���(�����(������ ��(����������(�7�������������X2G;����!�" 1�0�B�# ')"FP2Q�/ /�C�Y-��Y�Y-B�Y�C

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

����������������������������������������)�����������������������������!��������������������������������(�����������������(�������(��������!������������������!�������������������������������� ���������������������!�#����������������������(���������������������������$���������������������"��#�����������������������!�

���"� ����� �������� ���������������� �#��#�����#�8���������� � �����������������

�2���:������������������<��� ���/��(������������������������!�����������0)"������� �����������������������$������<���������!�������������������������������������!���������$������

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

����������������������������������������#��������������������������������<������������(������������$����!�����������������������B�������(�!� �� ������(�� ������������������$��������!����������������!��������������������������������������������������$���5!���#�������D�##��������!�E&����:�����������������6��������&��2��:2���2<�������%�����&��<��:<���<����������������"��#�����������������������!�

���9� ����� �������� ��#�������������� ���������� � �����������������

�2���:������������������<���#���������!

Page 216: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

���%

�������������K������������� 7����������������������������������������������������(��������������(����0�B)"���"����������������(����������������������!�������������?�����!@���������" 1�<6=-�6�+��'/ �5��F1 �FL �D 2<�+��'/2�B 11

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

����������������������������������������"������������������������������(������������!����������������������������"��#�����������������������!�

����� ����� �������� ��������8��������1�����%�������%����� ���������� � �����������������

�2���:������������������<���#���������!)����������>�������������(�?����(������������$��������!�����������$���������(���������@������������������>����$���������������(������������������" 1�0�B�)" �/ /P2�<Q�?����������Z���������;�$�����[@

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

�������������������������������������������������"����!����������������������� ��0���!�����(�������������������������(����������?���@��������������������(�?0�B�)" �B)�60"�+�P���Q��!���������(�����2����������<�����������2����<@�2��0���!�����>��������$��������!���������$�������������������(�?$��������������$�����������������������������(��������#��������������$���������������(���'��6@����������������"��#�����������������������!�

���(� ����� �������� ���������#������ �����#8�#��#���������� � �����������������

�2���:������������������<���#���������!���������� ����������������������������������(��������������0�B)"����������(�����������������������.�������48���#B�������������#��#������

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

���������������������������������������#������0�B)"������������������������������������������������"��#�����������������������!�

����� ����� �������� ������������%������� � ����#��#���������� � �����������������

�2���:������������������<���#���������!����������$������/��(�����'��������������������������������������$���������������������������$������������������������������0�B�������������������!������� �����������������������������������������$��������������� ���������������������!����������(����������������������������?��������������$�������@�

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

����������������������������������������0�����������K�����$���������������������������������!���?�����(������������!���!�����������������!�����$������@�����������������"��#�����������������������!�

�� �� ����� �������� ������G�8G����������������������������������� ���������� � �����������������

�2���:������������������<���#���������!)�������������������������������36=���������D����G�8G������������E�������������������������������������������!��������� ������!�����������������������������������������������������������������$���������������������������������������������������������&�?2�����7�(7$����������������D�����I�� �����7�(7��������������������T@5'/��DIT�?)" �D��)" �I��4�'�)" �T@�+ N�"05'/�+�����!����" 1�0�B�)" �D" �0�B�)" �I" �0�B�)" �T

Page 217: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

���&

�"G1�DIT�?D��I@�O�'�B�����������T�����!V�"G1�DIT�?D��T@�O�'�B�����������T�����!V

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

���������������������� ���� �����������������!����$������� ������'�B������������ ?����7�(7�������������������@��������������������������!��"�$������������������!������E�����M������������������?����7�(7$���������������@�����������������������������1�����������������"��#�����������������������!�

�� �� ����� �������� ���!�����������������������#�������� ���������� � �����������������

�2���:������������������<���#���������!H���������!�������������������D)#�����������������!�������������!��������D �'"�����������������������������H��������D �'"���������������7�����������������?���������@����������E����M��������$�����������������������5������������������������������������K�������D �'"����������������������������;FI�?������������������������@�5'/��DIT�?)" �D��4�'�)" �I���D)#�����D)#�:@6;'63������������?����$��������(���@��D �'"�DIT�?)" ��4�'�)" ���D)#���D)#@��������������?���������������������@�" 1�DIT�?���I ��', �:6�@B�������;�����������������$�����1B�������F�������������������$�����������$�������I ������������������������������������!���!�������������������������B�������5�������������������������', �:6�B�������7�������J

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

����������������������������������������5�!������������!��D)#��������������������������������������"��#�����������������������!�

�� �� ����� �������� ��������� ������������G�8G�������������� � �����������������

�2���:������������������<���#���������!������������������������������������������������������������!��������'�B����������������������$���������������������������������������$������!����(�$������������������������������������" 1�DIT�?"�+�, ����C�/ /@���" 1�DIT�?"�+�, ��9�K�5��5C�/ /@

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

���������������������������������������'��$�������������������������������������������������"�����������������������"��#�����������������������!�

�� � ����� �������� ���8������������ ������������������ � �����������������

�2���:������������������<���#���������!H���������!������������?����������@��������������������(�������������������������������������$�������������(�������������������������� �������������������������J�����G�8G������������&�������������������������������������������������������(�����������(������!�# ')"F��# ')"F�J� ����G�8G%���� �������&� ������� ���������� ���� ������ ���������� ���� �� �������� ��� ��������� ��$��!��$��������������(���������)�����������������������$���������(��������!�������(����������������!��# ')"F7'��6�

��������� �� � � ���� ��� ���� � ��� ���

�� ��� ���� ����� ���� � � �

� � ��� ��� ����� ������ ��!""#$$ � � �

���� ��� ��� ��� ��� � � �

��� ��� ��� ����� ��� ��� � �

���� � � � ������ �%������&�'(���'��� ��� � �

��� � � � � � ��� �

��� � � � � � � ���

\ ����(�����$�����������'��6���)" ����������$���������������8�1�G�����������������������������������

Page 218: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

���#

\\ 4�����X81������������� '.���$�������1�������������B�6#��

))) #���!����!���1��8�B�6#����������� '.�'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

������������������������������������������������������������������������������������������������������������������!�(��������7�(7$�����������7�(7������������������������������������"��#�����������������������!�

�� "� ����� �������� ������������������!�##��� ���������� � �����������������

�2���:������������������<���#���������!H���������!�����������������������?����������������7������@���������������������������������������������)�#��#����������#�����#���� ����������������������������������������������(�������"�9�/��G#��#����������#�����#���� �������������������������������������(��(������������������������

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

�������������������������������������������������������������������������%�����������������������5�!��������������������������������������������������������%�����������������������"��#�����������������������!�

�� 9� ����� �������� ��������� ���������#�������5;-���������������������������� � �����������������

�2���:������������������<���#���������!�����������������������������������������������������������!�������������������������������������$������������!�����B������������� �����������������!������������������� ����������� ��!�����K������������������������L���8��������������������������������������������������" 1�BF'/.5?D��I��T�����:@�O������3������������ ��������!�����7�(7$�������������������������������������������>��������������������7�������������!�7���������������������������������������������������������������������������������������!�����������������������������������������������������������

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

���������������������������������������)����#��#�����#�����#������������������$����������!�������������������������(��������!����������������� )�����G#��#�����#�����#��������C�����������������������������!�������������������������������������!$����������������������������R���!�����!�!��������������������"��#�����������������������!�

�� �� ����� �������� ��#���������������� ������������������ � �����������������

�2���:������������������<���#���������! ��������!��������������������������������� �� ������������������������������(������������������������������$������2�� �������������������������$�����������������������������������������(<�� ����������������������������������������(��������������������������������������

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

��������������������������������������������������"���������!������������������������������������������������$������������������"��#�����������������������!�

�� (� ����� �������� ���������%�����!�##����� ���������� � �����������������

�2���:������������������<���#���������!/���������������>������������$������������������$����������$��������!��� ��������������!���7!����$�������������������(��������������>����������� ��(����������$����������$��������!��

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

����������������������������������������'��$��������������$��������!��?��!�������������(���/B@�������������$����������!�����$�����������������>���������������$�����������$��������!������������������"��#�����������������������!�

Page 219: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

���!

�� �� ����� �������� ���8������������%�������� ����������%��#���������� � �����������������

�2���:������������������<���#���������!0���!�����>�������$�����������������!��������$�����������������������������������(���������$���������������������$������������������(���������$�������

��������� �� � � ���� ��� ���� �

�� ���� ��� ����� �

� � ��� ��� ����� �

���� ��� ��� ��� �

��� ��� ��� ����� ���

���� � � � ��� ������

\ 4�����X81������������� '.���$�������1�������������B�6#��\\ #���!����!���1��8�B�6#����������� '.�\\\ )����(�������������)������������������$���������(����D)#�����B'�+���������(����D)#�����B'�+��

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

���������������������������������������J�0�����$��������(���������������������>����$���������������!������J�#����������>����$�������������������������$������������������������������"��#�����������������������!�

��"�� ����� �������� �������������8� �#������!������������� � �����������������

�2���:������������������<���#���������! ��������!�������������������7�)�������������������O�������������������!7�����(������������������������������������$�������7��������������������������������$��������������(�����>����$��#� ���'�5O��������������������������������������������������#�!��������������������������������������������������������������������������������������������������������>�!���������(�

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

���������������������������������������J�5���8��������1����&���������������(������������������������������� ��� �������(�����������!$�����������P1�1Q������2�������(���������P1� Q������ ����!�������(������?����������@��������������������)������2����������=����������������������������������������P �<Q�?�������������������>��@�J�5���8�#������&������������>������������(�� �� ���������������������������������������������� ���������?������������@������2����������������������������������������������2����������?���������������@��������(�����2���������<������������������������(������(�!�P2�<Q������������������"��#�����������������������!�

��"�� ����� �������� �����������#!��8������ ���������� � �����������������

�2���:������������������<���#���������!)�����!��!���$���������������������������(�$����������������(������������������������(������������������/��(����������!�������������������(������?���K�������������@�J�5!����#�����C���$������������(�$���������������������������(���B'�+��J�-����%�����������������������(����

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

��������������������������������������������������������������(�����������������������$������������������������������(�$����������������(�����������������"��#�����������������������!�

��"�� ����� �������� ���#������ ������������������ � �����������������

�2���:����������������� ����(������������������������������&�������!�����������������������!������������<2�������������������

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

���������������������������������������� ����(��������������������������!�������!����&�����?�����@���������������������������(������!�������������������������������������!������2���������?�������� ����!������������C]C@�������(��������������������<2����������������������������"��#�����������������������!�

Page 220: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

���'

��" � ����� �������� ���%���#��#!���������� � �����������������

�2���:�����������������)�������(�!��������(������?����������(�������@������������������������������������������������!��

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

���������������������������������������#����(�����(����������������������������!���4��������!����������(��������� �7�<2�N;N�����������������"��#�����������������������!�

��""� ����� �������� ����!����������������������������!�##���������� � �����������������

�2���:�����������������)��������������������������?����������@���������D �'"�������������������� 2N��������������������$����������������������5'/���:��?B/'+5�'� ��B/'+5�'�2����� ����B/'+5�'� 2N��=*3.)535���C�:::@�D �'"��:��?B/'+5�'� ��B/'+5�'�2����� ����B/'+5�'� 2N��=*3.)535���C�:::@

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

����������������������������������������������������������������������������������������������������(��$��������������������)������������������������������������������(����!�!�����$����������'���������������(�!����!��!�����������������������������(����������������(���������������������������������������������"��#�����������������������!�

��"9� ����� �������� �������#��#�����#�8���������� � �����������������

�2���:����������������� ��������������������������(�������)������"����!���������������7�����������������!���������������������������0���!���������������������������������������!�>��O��������������(����������������G���������������?/��(��������������!����������������������������!������������������������������������!��������������������!�������������������������������!�����!�������@

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

�������������������������������������������������(���������������������������������.�������������������������������!���������������������������������������������������!���������������������������������"��#�����������������������!�

��"�� ����� �������� ����!��������������8������!�##������ ���������� � �����������������

�2���:������������������<���#���������! �����������������$���������������?F.0��6.0@�����������������(������!�������(��������������������������������R�����������!������������������������������������������)����������������������&��������������� G 31�?�������������������@�����������������������������������������������!�����������?B�����������������������������!�����������������������;1 1@

'������ �����������(��)����������!���������������������������'����(� '�����������(����������������?�����(��(����!���������(������K������(����!�'�����������@�������������

������������?��(����$����������!���@��*+�,++,".+,6.0,"�+�#, / �6������������6.0�������?���������$����������������������������������$���������!������������������(�����+0@��F.0������������������(��������������������������R�������������R���������+����������(������!�������������������������������5/H�'�/"%�"�97'�#� �� ��������������������������������(�����������������&���������������������#�������������������������������;1 1����������������"��#�����������������������!�

��"(� ����� �������� �������A�������� ���#���������� � �����������������

�2���:������������������<���#���������!)�����������(�������������7�������F�������������������!��������/��(�C����C�F����������������������������!������ ������������F����!��FGGG�� C"����C�F� �����������������#56)"���:')#9���������� ����������������������������

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

����������������������������������������)�����������������������������������������������������R���!�����!�!�������������������������������(���F��������������(�����������������������������������������F����������������������!�����?������������(�/�+@��'��$��F�����������������������!�������!�������������������������������������������������������R����!�����!�!����

Page 221: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

���(

����������������"��#�����������������������!�

��"�� ����� �������� ����������� �����#8�#��#���������� � �����������������

�2���:������������������<���#���������! �������������������5'/�����D �'"��������������������(������������������������������������?��!�����(����@����������D �'"��F�,6�9�?4�'� I5 ��4�'� I52�����@

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

��������������������������������������������!��������������������������������������(�����������������������?����������(���������������������������������D �'"�����������������������������������������!�������������������$�������������������-��$�������������$���������������(������������@�����������������"��#�����������������������!�

��9�� ����� ��������8�������#���� ��������� ����������� � �����������������

�2���:������������������<���#������(���)�������������!���������������������������?���, /�@���������������>��������?���,)")@�������������2��������������(��������������������������"����"� 11 * �,05 �PG� Q��� <1��* �,05<�PG� Q��� G1� 2<��* �,05=�PG� Q���22<�=�

* �,05G�PG� Q���211� 2��* �,05;�PG� Q���GG�12"����

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

���������������������������������������J�0$�����������������!��������������$����������J��)����������(���������������$��������������!�����������������������������������"��#�����������������������!�

��9 � ����� �������� ���%���#��#!����� ���������� � �����������������

�2���:������������������<���#���������!)����������������������������������������������F���������������������<��������������+��������������������2���������������������������������������+�+/.5�+<6=�0�B)"��A""""��#�F1 �FL �F 2<=0�B)"��. ��#�+1<�+G1�+LL�+ N

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

����������������������������������������+��(�������������������������������������5�!�����!F��������������������"��#�����������������������!�

��9"� ����� �������� �������������������������!���������� � �����������������

�2���:����������������� ��������������������������!��������������������������!����������������2G;�����������������������!���������������$���������������������������������������!��������������������������

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

���������������������������������������0$������������!��������������$������������������������������"��#�����������������������!�

��99� ����� �������� ���#������ ����#��#����������#������!������������� � �����������������

�2���:������������������<���#������(��� ��������(����������������������������������!������.����&�9�(�������������������������0�B)"�������#��������������������!�����������������,",#+��,0�B��,",++��,0�B��,",.+��,0�B��,",#F.0,0�B��,",+F.0,0�B��,",.F.0,0�BB������&�0�B��������������!)������&�5'/����������������!

Page 222: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

���

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

���������������������������������������7�����������������������?�(��!�����@7��������������������$����������������������������7����������������������������"��#�����������������������!�

��9�� ����� �������� ����������#�%���� �!�#�������#����������������� � �����������������

�2���:������������������<���#���������!)����$��������!���������������������$��������!��������������(���������������������

'������ �����������(��)����������!���������������������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

������������������������������������������!��$��������������$��������!��������$�����������(�����������������(�������������(������������������������>��������$��������!�����!��)" �78�'��6�4��������(�� 5�����( 4��������!�365, B��������������������������� ^D�������G�������E-�' )���!���������!�� ^�D����G�E*7**, �����$����� '.���B�6#� �C��$53 ��#�))���������� ��G��99�'3-�A ��������������!�?����� 11�$�����@ ��G��995;-� ������������� 5!���������8=35.6 F�������������� 5�������!������������������������"��#�����������������������!�

����� ����� �������� ���%���#������������������������ � �����������������

�2���:����������/���������!����)")�������������������!��� ������������$�����������������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� �������)")��������������+0����������������)")�����?$��E�����M@�

#�������!��.#�7��)"����������

����� ����� �������� �����������������������������G�8G��������������������#� ���������� � �����������������

�2���:������������������<���#���������!�����������������������������������!�����������������������������7�(7��������������������

'������ �����������(��)����������!���������������������������'����(� �������(��������!��������������������7��������-�'�$������������������������

����������������"��#�����������������������!�

����� ����� �������� ���������������%����������������������������#� ���������� � �����������������

�2���:������������������<���#���������! ���$������������������7�������$�������� �����!������������������������(���������������7�������$�������?6.0%F.0@�

'������ �����������(��)����������!���������������������������'����(� �������(������$�������������7�������# ')"F���������������������������������!��

����������������"��#�����������������������!�

��� � ����� �������� �������0��������������#���������� � �����������������

�2���:����������:��������������������������?B/'���"0)B������@���������������������������������������(��������

'������ �����������(��)����������!���������������������������'����(� �����!��������!�����

��������������!���������������������������(�)B������!���������������������������������������������������������������������������������������"��#�����������������������!�

���"� ����� �������� ���%���#����������������������������������� � �����������������

�2���:�������������������!���������/�����������������������?)B7�6#�7�"0)B��6//57�"06//5�����@�������������������������������!���!���������������!������������������������6//5��"0)B��"06//5

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ��������������!���������������(���������������������������������������������������

����������������'�#� ���(��'��������������!����

Page 223: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

����

���"� ����� �������� ��������%����������������������!�#����������������� � �����������������

�2���:����������+���������!������������������������?)B7�6#�7�"0)B��6//57�"06//5�����@��������������������������������������������!���������3

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ��������������!�����)����������(���$���������������������

����������������'�#� ���(��'��������������!����

���9� ����� �������� ���!��� ����#������������� "���������� � �����������������

�2���:�����������<���#������(����=�����������������������������������������)���(�����������������������������5����/�����(������!�����(����������������������������(���������������������������������������������������!��)�����������������������������������������������!���������������������� ������� ��������������������$��������������211;1��D�/"B,F�/�D,"�+�, �:�����21131�D�/"B,�-�"�D,"�+�, �:������������������=������������������������� ���������G�������������������������2�)��������������������������������(��������������������������5����/��������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ��+��(��������������#���������������������������!�����(������������������������������������������� ��

!�����(�����������������D��I��T����������������� ��(�������������������!�������������(�����������������������5'/��0')66�F �T 1�B 111�+ N��2��0������!������������������(��������(����������������������������������������(��������������(�����������5'/��0')66�?�D)#�0')66�D)#@�F ��DP0')66�D)#Q� 1�B 111�+ N�������������������!����0')66?T@����������������'�#� ���(��'��������������!����

����� ����� �������� ���������8��8��� &���������������������������������������� � �����������������

�2���:�����������<���"����������������!(��(��������)����������!(��(���������������������������������������������������!(��(����

'������ �����������(��)����������!��������������������������'����(� +��(��������!����

��������������������'�#� ���(�

�"��� ����� �������� ��/1���������<���#���������� � �����������������

�2���:���������������������0�������� $��-������!��������������.����� ���. ������������ $��.������!�������.�(:�4�����#��>����������!� ?0����������!@���������B�!����>�!�������������� ��$����!�����������������0���������!������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 9�����������������5�!���������$��!��������������>�!���������������>����5�!�������>����#����!����

�����5�!���������������������������������!������������!������������������'�#� ���(��'��������������!����

�"��� ����� �������� ����������#�������C�����#����������������� � �����������������

�2���:������������������������(����7�����������������������?��!�����������������!����������������������������@�������������������������$�!�6B�����������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� '������������������!��������(�������������������?��!�����������������������������������������(�������@�

������������������!������!��������������!���������������������������������������(�����������������'�#� ���(��'��������������!����

�"��� ����� �������� ���%���#�#�������������������������������������� � �����������������

�2���:�����������������)�������������������������������������������������������$�������������������������������������(�������������������?����7�(7�������������������������������������(����D)#�� ������������!���������������������������������$�����1����������������������������������������@�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� �������!����������������������$��������$��������������������������

����������������'�#� ���(��'��������������!����

Page 224: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

����

�"��� ����� �������� ���������� ����!����������������#���������������������� � �����������������

�2���:������������������<���5�!��������������������������?����!@�����������������������!�����)������������������������������������!��������� ��� ����� ��!���� �������� �� �� �����!���� ����� �� #� )" � ���������� ���� ��� ����� �� �� ��� ��������� ��������!�

'������ �����������(��)����������!��������������������������������!��>���'����(� �����������(���$������������������

7� (��!���������������������������������������<7������������!���������%�#� )" �������������5'/�������������'������������!�������������������������!�7�5���������<��������������������� ����������������������������������������������������������������������(�0�B,0)'��� ���������������������$�� ?$��5/H�'/"���$��++��������!���������(�5)����$��RB,�/5IR@�7�5���������<����������F.0�$�������� ���������F.0�����������������!�����$���������������������������������(�0�B,0)'������������������������$��?$������)") )�6,)")������������$��++��������!���������(�5)���$���RB,�/5IR@�����������������"��#������������������!����

�"��� ����� �������� ������������������%��!�##���������� � �����������������

�2���:����������������� ���������������!���������3���!������$�����������������������#������������������������������������!������������������������(���$���������!���������N��)���������������������������������������$������=V

'������ �����������(��)����������!��������������)����������������"��#������������'����(� +��(�����������!���!��������������������!��������������������!�����!������������(�����������������

����������!���$���������������!���!�����������$���������������������������� ��������������������!�������(������!������$�������������������'�#� ���(��'��������������!����

�"�� ����� �������� ��������������������������%���#���������� � �����������������

�2���:�����������������)������������������������!�����������������������5���>�������!��$��

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 5�!���������������������������� �����L�LLL�

����������������'�#� ���(��'��������������!����

�"��" ����� �������� ������#��������� �����������������������%���������������� � �����������������

�������������������!���������������"�9�����(�����������������������>���������!������������������!�����$������������!�����������������������������������H����������!��������!����������������$����������������$���������������$��������������������"��������

'������ �����������(�'����(� ��������������K�������!�����������"�9�����(������������������������������(�?��������$��$��@����

��������!����?��!����$��$��@������������������)������������������������������$��������������������$�����������!�������!����������?�(�������������@������������������������������(��"�����������������������������(�

�"��9 ����� �&����������������������������������� � �����������������

����!��������������������������������������������������$�����������H����������!��������!���������������$�����������������$���������������$��������������������"��������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� )������������������������������$��������������������$�����������!�������!����������?�(�������������@�

����������������'�#� ���(��'��������������!����

�"��� ����� �������� ���������������������������������������#����������������� � �����������������

�2���:�����������������H����������������������������������?��������@�����������������������������������������������������J���!���������������8���������8����!�������������������������������������?�����������������!@���J�����������������������������������? ����(����������������������(����!�>����������������������������!!���������� �1<L��C��������� �������2�����������������������!�C@�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ���������������������������������������������������������"�������

����������������'�#� ���(��'��������������!����

�"��� ����� �������� ���������������������������������������#����������������� � �����������������

�2���:�����������������)��������������������������������������������������������������������������������!�������

Page 225: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

���$

'������ �����������(��)����������!��������������)����������������"��#�������������+��(��������!��������������������'�#� ���(��'��������������!����

�"�"� ����� �������� ���������#������������������������ � �����������������

�2���:�����������������)��������������������������������������������������������������������������������������������������������������������������������������������������������������������� ��)����������������!�����!�����������!��������������������������������������������������������������(�������!��������������2��3�#��&� ���"�9�����������������������������������������������������!���������������������������������������������������������������������������!��������������������������������������������������������!���������������$�����������+0�2 111��-3�,6+633*3+�*��'�?����������������������!�������������������������������K�������������������������-3�,6+633*3+�*��'��$�����(�2 1 1��-3�,6+633*3+=5�'*3EC��!������� ����� ���� ��!������� ��������������� �(� ����+0��-3�,6+633*3+=5�'*3� ?��� ���!�� ����� �� �����!������� ������ �� !������� ����� ���� K������ �� ���� ������� ����� �-3�,6+633*3+�*��'� �$���� �(�-3�,6+633*3+=5�'*3E:<�����������&������������������������������������!������������������������������!�������)��������������7���������������������������������!�����!���������������������!�������������������������������� ����!���������������������������������������!����������������������!����������������������������%��!�����������������������������������������1�11 �?���������!���������� �3���!����@�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ������+0�2 111��-3�,6+633*3+�*��'�����2 1 1��-3�,6+633*3+=5�'*3�� )�� ����$��������������

������������������������������������������������7�����������������!�������������������!����������!��������������(�����������������'�#� ���(��'��������������!����

�"�"9 ����� �������� ���������������������������������������� � �����������������

�2���:����������������� �����������(���$�����������!��������7� ������!�����������������������������!����������%���!��������������������$�������������������!�����������������������������7�"��������������������������������������������������������!�������������������7�����������������������7���������������������������������������������������������(��������!����7�)�������������������������!����������������������!�������������$�������(����������$��������7�)��������������������������������!��������������!�����������!����������$�����������������������$������������!����������� .'"�

'������ �����������(��)����������!��������������������������������!��>����"��#�������������"��#�������������������������

'����(� +��(��������!��������������������"��#������������������!����

�"�9� ����� �������� �������#���������������������������!�##���������� � �����������������

�2���:�����������������B�����������!����������������������"�����������������������������������������>����������)��$��(��������������������������������$������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 0$�������������������������������������$���������������������������

����������������'�#� ���(��'��������������!����

�"�9� ����� �������� ����������������������������������������� � �����������������

�2���:�����������������J�)�����������!��������������������������$������������������?��!���$����(�>��@�J�)����������(����������������������$��������!�������������������

'������ �����������(��)����������!��������������������������������!��>���'����(� ����(>��������!�������������������������$��������������!����

����������������"��#������������������!����

�"��� ����� �������� ���%���#�������%�������#����������������������������� � �����������������

�2���:�����������������H���E0������������������M����������$���!������������N������������������?��������� ���������������$�����������������$�������&�������(�������$������������8��!�����������������(�������(�����C#������������C�/"%/BB�������$��@�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ��������������$���?����������������������@�����������3�

����������������'�#� ���(��'��������������!����

�"�(� ����� �������� ������8�����%����������������������������������������������� � �����������������

�2���:�����������������������������������������������������?�����@�������������������������������������(����������������

Page 226: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

���%

!�����������������������!�����!������������������$�����������(���������������!����$������������������ ���������������(��������+0������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ������������� �����!����������(������

��-������������������������(�������(����������������������$��������������_�?B����������'��6����������������O�://6���������������@2�����������$���������������������(�!�����$�������_����������������'�#� ���(��'��������������!����

�"��� ����� �������� ��M����#��������������#���������� � �����������������

�2���:�����������������)������������������������ &������ ���� &������������������ ������!������������������������� ����?�(������������������������������@��)����&�����������������������������������!$���������������������!�������������#�#�������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ������"���������!����������������!��������������

�����������������������!������!�����������������������������2��)������&�����������������_<��-�������������������������������������_����������������'�#� ���(��'��������������!����

�"��� ����� �������� ���%���#�<��������������� � �����������������

�2���:�������������������$���������������>��������������!���������������������0������������������������2G���������$�������������������������(����!��������������$�������������������$��L�������������������?0 �7�0L������������!���0 @��H��������0������������!������������������������������$��?01��������������������!�������������$�����@�" 1�F���D����I���� G 5�������������0 ��� G����$�"G1�F���D����0<�+�� 5�������������0<��� G����$�";1�F���D��� 21 5�������������0 ��� 21����$�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 5�!����0�������������������������$��������!��?01��0 ���0L@�

����������������'�#� ���(��'��������������!����

�"��� ����� �������� ���%���#�������C��#!� ���������� � �����������������

�2���:�����������������5�!�����!�'� ������� �����!������$���

'������ �����������(��)����������!��������������)����������������"��#������������'����(� #������F����������������!��������������������$�����(�����"�9�

����������������'�#� ���(��'��������������!����

�"��� ����� �������� ���!��� �����������!����8����������� � �����������������

�2���:������������������<��������������������������/��������������!���������!�����!������������������� �� �����(����25-')D!E�CH����������������!������������������������!���������������������������C�����������������������������������������!�����2��A("�C'�������������������������������!���C������������!��������������������?/��(���������������������������@<�� �����(����)*�0)*�5����������������������������? �����(�����#5/#�����#5/#������������!��������������������������@

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ������������������!�����������!����������������$�����������$�$���

����������������'�#� ���(��'��������������!����

�"�� ����� �������� ����������%���1����������%���������8�������������������������� � �����������������

�2���:�����������������)��������(���������������5/6I������!��$��$�������>��������������!�������������������(������������(��������!���),@:::��

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

���������������������������������������������������$�����!$�����),�@�:::�����������������'�#� ���(��'��������������!����

�"��" ����� �������� �����8������#������������� ���������#��������8�������������������������� � �����������������

�2���:����������������� �����(�������!������������(����������������������������������������!��������������������������� �������������������(�������!������<�������������������������!���������������?�@������A������A�������A�������

��������������1�������������������������������������������������������!������V'������ �����������(��)����������!��������������)����������������"��#������������

Page 227: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

���&

'����(� '������������������������������ �����(������������(���$����������!���������������������!�" �5/6I�5/PDQ�? � ��2�22��<�<<@�5/PIQ�? � ��2�22��<�<<@" �5/P�Q�����56�==������������������������3�����������������������������������'�#� ���(��'��������������!����

�"��9 ����� �������� ����������������#������1�����#������������� � �����������������

�2���:����������������� ����������������������������!�����!������������ ����������!������������������������������������������������������������������������

'������ �����������(��)����������!��������������������������������!��>���'����(� +��(��������!���

����������������"��#������������������!����

�"��� ����� �������� ���8����%������������������������� � �����������������

�2���:�����������������0���!�������!�����������$�������$��������!�������������������������������������������������������������������(���������(���$���������$����������������(���� �������������������$��������!�����!����������4��������(�� 5�����( 4��������!�365, B���������������������������� ^D�������G�������E-�' )���!���������!�� ^�D����G�E*7**, �����$����� '.���B�6#� �C��$53 ��#�))���������� ��G��99�'3-�A ��������������!�?����� 11�$�����@ ��G��995;-� ������������� 5!���������8=35.6 F�������������� 5�������!��������

��������� �� � � ���� ��� ���� �

�� ���� ��� ����� �

� � ��� ��� ����� �

���� ��� ��� ��� �

��� ��� ��� ����� ���

���� � � � ��� ������

\ 4�����X81������������� '.���$�������1�������������B�6#��\\ #���!����!���1��8�B�6#����������� '.�\\\ )����(�������������)������������������$���������(����D)#�����B'�+���������(����D)#�����B'�+��

'������ �����������(��)����������!��������������)����������������"��#������������'����(� +��(�������!������������������������$��������!�������������������!���(���������$��������������

����������������'�#� ���(��'��������������!����

�"��( ����� �������� �����������������%��#����5;-���8����������� � �����������������

�2���:����������������� ������������������D"�+��7���$����������������������������������������# ')"F��(�����������������?������$����@��������D)#��(���7�����������������������������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ���������������������������������?��������@���������������D"�+�����������������������!�����(���������

������������������������������������!������(������������������������� 1�111���D�/"B,+��-�D,"�+�, �:21�1N1���D�/"B,F�/�D,"�+�, �:21�131���D�/"B,�-�"�D,"�+�, �:#������ ���� �������������!� ���������������� ���������������������!��������������� �� ���������������� ���������(��?)��������!������������������������$������"���������!�������������!���������������$���������(����������E5����/�M�@����������������'�#� ���(��'��������������!����

�"��� ����� �������� ����%���������&�������������������� � �����������������

�2���:����������������� �������!��������$����)" ���'��6��������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� +��(��������!�����)��������������������������������������������������������!����������������������(������

�����������������������)#".+:�'�?����������������������@�����������������'�#� ���(��'��������������!����

�"��� ����� �������� ������������������������������������������� � �����������������

�2���:����������������� ����������������!������!���������������!��������!���������������������������!����!������������(������(�����

Page 228: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

���#

'������ �����������(��)����������!��������������)����������������"��#������������'����(� �����!��������������

�������������!����H��������������# '6�"���� �������������������������>����������������!��������������!����������!�����������������������'�#� ���(��'��������������!����

�"��� ����� �������� ����������������������������%���������������� � �����������������

�2���:�����������������B��� ������������ !����!�� ?������������ �(���@� ���� ��� ���� ��� ����� �������� $�� ������� ������ )�� ������������� !����!� �� ���������� �(� ������ �� ���� ��(���� '35*3-DE� ?�� ���� ������� �� �����������!����!@�������������������������������$������������$��������������������������!����������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 5���������"��#�����(�����������������������E������������M��������������(�5'/F'�+��/''�� �� ��

���������������������������������������J������������������������������������!����!�����������!������������!��������������(����'35*3-DE�?������������������������������!����!@�J������������������������������������������!����!�������������$�����(�M5����/�M�����������������'�#� ���(��'��������������!����

�"��9 ����� �������� ���������#������������������������������� � �����������������

�2���:����������������� ����������������� $��������!���������� ������!���!��� ������������ ���������� ��������� �� �������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� +��(��������!���

����������������'�#� ���(��'��������������!����

�"� � ����� �������� ��������8��������1�����%�������%���������� � �����������������

�2���:�����������������/�����!��!��������(��(���������#� ����������>����$����������������!�����(������������$����������������������!��������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� '�����������������������>����$������

����������������'�#� ���(��'��������������!����

�"�9� ����� �������� ����������������������������������#����#����#�D.<E���������� � �����������������

�2���:������������������� �������� ������� ���� ��!������� ����� �� ��!��$�� �� !������� ����� ���� ������� ����+�,++,".+, //6,��'')�'�

'������ �����������(��)����������!��������������)����������������"��#�����������'����(� 5�!����$���������������������������������������+�,++,".+, //6,��'')�'�

+��'����7 ������������`������

�"��� ����� �������� ����������#��������%���������� � �����������������

�2���:�����������������)������������������������������$����!����������F11��F1 ��F12���F1<�������������������������������������������������(����3)@:::�����!��$��0��������������J����������������#��������������������������!��������������������������!�������������������?���������(���������F11%F1 %F12%F1<@�J����#����������������������������!�������������������������!��������������������������������������F�������F 1������������!����������������������F �����>��������������������H�#F 2�������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� �������"���������!����7����������������������������������������(����$����������$����������������(����

�����������������������������������������������������?���������������������(������������!���5)@:::@�����������������'�#� ���(��'��������������!����

�"��� ����� �������� ����������#���������������������� � �����������������

�2���:�����������������)�������(�!��������������������$����!����������F11��F1 ��F12���F1<����������������������$��������!��������������!�����!�������������������(����5)@:::��������������������)���$�����������!������7<;1���A<;1��!���������������������1�1�1 ���!�����0��������������J����������������#��������������������������!��������������������������!�������������������?���������(���������F11%F1 %F12%F1<@�

Page 229: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

���!

J����#����������������������������!�������������������������!��������������������������������������F�������F 1���������������������������!����������������������F ��������������������>��������������������������������������(�����?H�#@F 2����������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� �������"���������!����� ���������������������!����������������!�����������������$������7<;1���!��������

A<;1���!���������������������1�11 ���!���������������������'�#� ���(��'��������������!����

�"�9� ����� �������� ��������#��������%���������� � �����������������

�2���:��������������������������!�������������F 1��F ���F 2������������������������������������������������(����3)@:::����!��$���/��(����$����������$�������������������0��������������J����������������#��������������������������!��������������������������!�������������������?���������(���������F11%F1 %F12%F1<@�J����#����������������������������!�������������������������!��������������������������������������F������F 1������������!����������������������F �����>��������������������������������������(�����?H�#@F 2�������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� �����������"���������!�����5��������������������������������������(����$�����������$����������������(

������������������������������������������������������?����������������������������������!���5)@:::@�����������������'�#� ���(��'��������������!����

�"��� ����� �������� ���������������������������� � �����������������

�2���:�����������������)���������!�������������F 1��F ���F 2����������������������$��������!��������������!������������������(����5)@:::��������������������)���$�����������!������7<;1���A<;1���!���������������������1�11 ��!�����0��������������J����������������#�������������������������!�������������������������!�������������������?���������(���������F11%F1 %F12%F1<@�J����#���������������������������!�������������������������!�������������������������������������F�������F 1������������!����������������������F �����>��������������������������������������(�����?H�#@F 2�������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� �������"���������!����� ���������������������!����������������!�����������������$������7<;1���!��������

A<;1���!���������������������1�11 ���!���������������������'�#� ���(��'��������������!����

�"�(� ����� �������� ��������������#���������8���������� � �����������������

�2���:�����������������H���� �����!� ���� ����� ��� ���� ���� ��!������� ����� ���� ��� ����!� �� ���� ��������� �������!� ��$���5�!�����!���������������������(������������������������$���������F N���F L�� ������������������������������������������F 1��F ���F 2�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� �����������"���������!�����/��(��������!�����(��������(������!���������������������������������������!

����������������������'�#� ���(��'��������������!����

�"��� ����� �������� ������������#�������������#���������8���������� � �����������������

�2���:����������������� ����������������������(�������������������!�������������������������������(�����?�����5������'5����@����������������������������(�����?��������������D��I����@��

'������ �����������(��)����������!��������������)����������������"��#������������'����(� "������������"���������!����7���������������(��������������������#�����8������8�

����������������'�#� ���(��'��������������!����

�" �� ����� �������� ���%����#���#��������������%��#���������8���������� � �����������������

�2���:�����������������-���������$���������������������������������(� ��B�������!������7�-���������$��������!���������������!������7�"��������!�������7�B������B0����!����������������������������������2��B��������!������

Page 230: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

���'

7�"��������!�������7�F;1�������$��7� ���F�!������������?��(�F1 ����)5@

'������ �����������(��)����������!��������������)����������������"��#������������'����(� +��(��������!����

����������������'�#� ���(��'��������������!����

�" �� $�#���� ��������������������������������%���������� � �������������������

J� ����������������!�����$����������$���������������������������J���������$����$��������!����������������������?�"�,-�"0H-��6,+/0.6�,"'@���J��������������!����������!���������������������������������$�����������

'������ �����������(��)����������!��������������"��#�����������'����(� ��������������!������?�����������@����%����$�����������

'������������������#�����������/BB�7�/"�

�""�� ����� �������� ���������#������������������%������������������������%����������� � �����������������

�2���:�����������������������!���������������������������������������������������������$��

'������ 5�������������������������������"���������!��������A"��?�������������F11���F1 @��������������!������������������!������������������'�#� ���(��'��������������!����

�""�� ����� �������� �������������������%���������������� � �����������������

�2���:����������������� �����K�����������������������$��������������� ���������!��������"221� '�/')?<@O�G7�����������������<�/"�������(������������� �����2�����

'������ �����������(��)����������!��������������)����������������"��#������������'����(� J�+��(��������!�������!��������������������������(�

J�������+0�2= 11� '�B/, I5�,��?���!����������������������������!�������������@�����������������'�#� ���(��'��������������!����

�""� ����� �������� ������������������������8�����1#�������������������������� � �����������������

�2���:�����������������5����!����������������������������(���������������������������K�����(�����������������+�#����������������(��)���!���������������������������������!�����������������!��������������������������������������������������������������!������$�����������������������������������!�����

'������ �����������(�'����(� +��(��������!�����#(�����>������������!�����������������

�����������������������������(��"�����������������������������(�

�""�" ����� �������� ���%���#������������������������������������������ � �����������������

�2���:����������������������������������������������!�������������5��������������������J�����������$�������(��������������������������������������a������!�������(����������������?78�������@J����������������?78������������#5/#@J�����5/#������?78������������H�) 5@J���������!�5������?�����������78�H�) 5@J�5��������>����$�������������������������J�������!�����(��������!������������������������������������J�+�����������������������?78����(�������������������������@"���� ��(� ����� ����� ��$�� ��� ����� �������� �!��� ��� �!������ $�� �D)"�6,)66�F�6,�D)#� �� =1L2� �:#�6,#I#�''�-�",'�#� ��� 1 �����������D)"�6, '�"#B/'+,5�'�+� �'��� ==1=� ����������7������������������������������� '�/')��7 '�"#+) �J� ��������������������������������������������������?��!�������������������@�?78�����!���������!���(@J�5��������>����$�������������������������J�#��������K���������������������������������������������������������?��!������(��������������������@?78����(�������������������������@ '��I6�J� �����!��������������������������������������������������������� '��"F�

Page 231: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

���(

J� �����!���������������������������������������������������������J�5��������>����$�������������������������J�5���������������������?��!�� '��"F������$��������!�����$����@�?78����(�������������������������@

'������ �����������(��)����������!��������������)����������������"��#������������'����(� +��(��������!������������������

����������������'�#� ���(��'��������������!����

�""�� ����� �������� ���������#������������������%���������������!������������ � �����������������

�2���:�����������������)�����������������������!���������!��������!�����(�������������������������������������������������$��

'������ �����������(��)����������!��������������)����������������"��#������������'����(� +��(��������!����

����������������'�#� ���(��'��������������!����

�""��& ����� �������� �������������������%���������������!������������ � �����������������

�2���:�����������������)�����������������������!���������!��������!�����(�������������������������������������������$��

'������ �����������(��)����������!��������������)����������������"��#������������'����(� +��(��������!����

����������������'�#� ���(��'��������������!����

�""� ����� �������� ������������������&������%�������8�0��������������� � �����������������

�2���:�����������������)�� �� ��� ���������� �� ����!�� ���� ���!������ �� !�����(� ����� �� �������� ����� ����!� ���$�� ��� �������������

'������ �����������(��)����������!��������������)����������������"��#�����������'����(� +��(��������!���

����������������'�#� ���(�

�""�" ����� �������� ���������A6*5;&����������������������� � �����������������

�2���:����������������� ���������������������F�/�D?���@������������������5�����������������7�.��$�����������������������7�+��������;�������������������������7���!�����(������������������!�����������������������������1���!������������<�7���!�����(��������������!��������������������7����������������������!��������������������7��������������������������!��������������������!�����(����������������������������������������������������7��������������������������$����!�����(�������������!�����(�����!����!���������!�����(�����������������������������������������������

'������ �����������(��)����������!��������������)����������������"��#�����������'����(� +��(��������!������������������

������������������������������(��"�����������������������������(�

�""�� ����� �������� ���#!��!��� ��������������#���������� � �����������������

�2���:������������������<������ ��� ���� �� �� ��� ���$������ ��� ��� �����!� ����� ���� �� ������ �� ���$��� ��� �� ��� ������� �(�������� ����B'�+�,/',�/''5/#,"/ �66/H�0�

'������ �����������(��)����������!��������������)����������������"��#�����������'����(� +��(��������!���������!���������������/'',B/',�D)#,"/ ,�66/H�0

����������������'�#� ���(��'��������������!����

�"9�� ����� �������� ���������<6=����)3*������������������������������������� � �����������������

�2���:�����������������"���������!����������!�7��$������!��!����������������$����������������!�#��������������������(��������������:� ��������������������������������(O�������������������� �����������������������������!�����������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 5��������������5'/B����������������������!���!���������!����

����������������'�#� ���(��'��������������!����

�"9�� ����� �������� ��)3*����������������������������������������� � �����������������

�2���:�������������������������������������������������������?E����7�(7$����M���E����7�(7���������M@����������������������������!�������5'/������������

Page 232: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��$

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 0���������������������������������������(��������

�����$��������������������������?������������������������@���#5B� 2<=G;�+ N2���#������������������������(����������������������?������������������������@�5'/��.5"�+��+ N�"05'/�<��#������������������������(����������������������?�����������������������M����7�(7$����M@�5'/��.5"�+��?4�'"�+� ��4�'"�+�2�����@�+ N�"05'/�=��#������������������������(����������������������?�����������������������M����7�(7���������M@�5'/��.5"�+��? (� �4�'"�+� �� (�2�4�'"�+�2�����@�+ N�"05'/�����������������'�#� ���(��'��������������!����

�"9�� ����� �������� ���������)3*�����������#����#���������������������� � �����������������

�2���:����������������� ���5'/��������������(���(������!����������������!���!����������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� +��(�"���������!��������������(�

����������������'�#� ���(��'��������������!����

�"9 � ����� �������� ��6;'63���#�)3*���������#������������#���������� � �����������������

�2���:�����������������#�����������������������������������������������������(��������������������!�����)�����������������������(���$�������?������(����@�������������������������������������������������������(���������7����/�����������D �'"���������������������!������������������!���!������������" 2<�6;'63��.5"�+��? I5� �� I5�2�� I5�<�����@ ����(���������$�������������������(�����������������(���!$����������������?5'/������������@���������������������������� ������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ����������$��������(�����������D �'"���������5'/����������������������������������������

����������������'�#� ���(��'��������������!����

�"��� ����� �������� �������������������������������������� � �����������������

�2���:�����������������������������������������������������������������(�$����!�������������#��������������������������!��������������������������������������������������%��!������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 7��������!��������������

7����������!������++����5��7�'�������������!�?�����(�����������������������������������@�����������������'�#� ���(��'��������������!����

�"��� ����� �������� ���6'-�'���������������������%���#����������������5�/)���������� � �����������������

�2���:�������������������(�������������������������������������������������������!�����������������?�����������������������(��������"�9�����@�� ����������������"�9���������������������� �����3��)������$��������������(����5')/����������������(��� �7� 23�? ��������!���������(@�������#� )" �������������������)��"�9������G�����!�����E M��������������6)B ,T���������������������������!���������(�" 11�#� )" �?G@�5')/��� ��:-�:,T

'������ �����������(��)����������!��������������)����������������"��#������������'�+�0I� 5�!��������"�9������������#� )" �����������������$�������������������� ���!������������ 23�

����������������'�#� ���(��'��������������!����

�"(9� ����� �������� ��������8���!�����8�����������������#���������� � �����������������

�2���:�����������������+�������� 1�������(�����������$���������!������������"�������

'������ �����������(��)����������!��������������������������������!��>���'����(� ������������������������(���������������������(�����������7�����������������������������������������

Page 233: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��$�

���������������(����������������$�������������(���������$�����$���������������������������'�#� ���(��'��������������!����

�"(�� ����� �������� ����!�����8���������������������������#�����#�8���������� � �����������������

�2���:����������������� ���+�����-�����������������$������������K�����$�����������������!���������(�$�������������(������������������������!�����������������(������������$�������$������������������!�����H�������!������(���������(������������$��������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 5�!���� ��(� ��� ������(� ������� ���� ������(� ������� !���� ?!���� ���������� ������ �� ���� ������

������������R����!�����!�!���@�����������������'�#� ���(��'��������������!����

�"((� ����� �������� ����!�����8����������������#���������8���������� � �����������������

�2���:����������������� ������������������������!�������������(�������������"��������������������������������������������(�������������������������(��������!���������������!�������?+�����#�������@��)����������7������������(������������������������������������(�������������!����������"�9��(����������!������������������������������(� ���������(��������� ���������������� 11�5/;=/+.5;�/.+A3*/)+5��-A�?��������� @�B�����������7�������������(����������������!��������!������������!���������������������!��=��������7�������������������221 1�5/;=/+5��-A�+'F)6&��8�������!�����8�������C���!��+22111�5/;=/+5��-A�+A3*/)&���K����������22121�5/;=/+5��-A�+6;'6��-*�&���(���K�����!����221<1�5/;=/+5��-A�+B5,/6&��������%���

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ������������������!����7������ ;�������(���������������G�+�������������"������������� �������(�������

����!��������������������'�#� ���(��'��������������!����

�"��� ����� �������� ������%�%����������!��������#����#���������#����������������������#���������� � �����������������

�2���:�����������������B�������������C�������������!�������FL;C��������������������������������!�����������������(���,-.�@:::�� ���$�������������������!��1� �7LLL�LLL�L�P��$%��Q�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 5�!������������������������������������������������!���������������������!$�����$��� �����(����6)+#

��������������������������������������������������������������������������������������!�����������������������'�#� ���(��'��������������!����

�"� � ����� �������� ��������#��8������#���������� � �����������������

�2���:�����������������)��FLN������������!������������������(�������������!��FL;��������?��FLN�������(@����$�����$���(�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� '��$��FLN��������������(��������������!���������������������(���?FL<��FL=��FLG���FL;@��������������!

���������������������������������'�#� ���(��'��������������!����

�"�"� ����� �������� ��%������������������������#��������������������� � �����������������

�2���:����������������� �����!������������!�����������������������������!�)��������!���������1�1 ���L�LLL�LL�P�%��Q�)��������!�������1� ���LL�LLL�LL�P���%��Q

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 5�!���������!���������������������#�����������������������!����$������

����������������'�#� ���(��'��������������!����

�"��� ����� �������� ����������������������#�������������������������� � �����������������

�2���:�����������������H������!�����!����������(�����������������!���!�������������������������������!��������!���������������������������� ����������������������������������/��(���������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� #������������!�����!�$������!���������!�����������������������������(�������$������������������

�����!�?�$�����������������������@�����������������'�#� ���(��'��������������!����

�"��� ����� �������� ���%���#���������������������������#���������������� � �����������������

�2���:�����������������H������!�����!����������(�����������������!���!��������!��$������!���!������������!���!���!��������������K������<;1���!����������������!�������

'������ �����������(��)����������!��������������)����������������"��#������������

Page 234: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��$�

'����(� 5�!��������!���!����������������������!����$��������������1�111 �����<GL�LLLL�P��!����Q�����������������'�#� ���(��'��������������!����

�"��� ����� �������� ������#����������������������������������� � �����������������

�2���:�����������������H������!�����!����������(���������������������������?�)5@�����<������?�����������������������������@������������!������������������������������?��!��������(������������������������������)��S��9@�������������������������������������������)��������������������������������������������������������������?��(���� .'"����@�������������������������������!�J� .'"81�������������(���������������������������������(�!�����J� .'"�1������)5������������������������������������������!���������!��������������������������������������?�����������������!�@�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 6������������������������������������������������������)��S�����9������������(���������������(���������

�����������������������������������������������������������������(�������������!�����!�������������!������������������������������!���!�������������������������������������������'�#� ���(��'��������������!����

�9��� ����� �������� ������G�8�������������������������������������� � �����������������

�2���:�������������������H�) +%H�) +�%#� +%�6��'+����������������!��������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ��������������������������!�(�

����������������'�#� ���(��'��������������!����

�9��� ����� �������� ���������� ��������!���#����-�-�������������� � �����������������

�2���:������������������<�������!������������������������!� �����)")� ����� �������������!������� �� ����������(���������� �� ������!����������������

'������ �����������(�'����(� ������������������!����

�����������������������������(��"�����������������������������(�

�9��9 ����� �� ����������-�-�������������� � �����������������

�2���"���������������������������������������������������!����)")����

'������ �����������(��)����������!��������������"��#������������'����(� �����������)")������������������+0������������������)")�����?$��E.����M@�

#�����������/BB7/"�

�9 �� ����� �������� ���%���#�����G��G����#��������#�������������������������� � �����������������

�2���:�����������������)�������������E:������������������������M�����!��$�������������������������������������������5�?��������������@�� ����������������!����$��������5� �7�5�L�LLL�

'������ �����������(�'����(� ��������(����$������������������������������!����$������

�������������������������(��"�����������������������������(�

�9 �� ����� �������� �������L���#�#��������������������������##���������� � �����������������

�2���:�����������������0���!�������������������!����������������������������!��������������������������

'������ �����������(�'����(� �����������������������������!���������!�(������������������

�����������������������������(��"�����������������������������(�

�9 �� ����� �������� ���%���#������������������#���������� � �����������������

�2���:����������������� ����������������������?�(���������������!��@���������������� ���!������������G��)���������������������8������������������������� ��������!������������������������������ (���+����! #��������������������2 #��������������< #�������������!= #�����������!��������G #���������������������������

'������ �����������(�'����(� +��(������������������������

�����������������������������(��"�����������������������������(�

Page 235: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��$$

�9 � ����� �������� ���%���#��������������������������������������������� � �����������������

�2���:�����������������#(���������V�5��$�����!��������������������������������:������������������������������(�E�M��������������(����E"M�

'������ �����������(�'����(� '����������������������������������������

�����������������������������(��"�����������������������������(�

�9 "� ����� �������� ���%���#��������������������������������������� � �����������������

�2���:�����������������#(���������V����������������$�����������2����������������<2���������������������������������������������������������������������������������6���������������������������������

'������ �����������(�'����(� '����������������������������������

�����������������������������(��"�����������������������������(�

�9 9� ����� �������� �����������������������������#���������� � �����������������

�2���:����������������� �������������!����������������������������������������!���������������������������������!�����$�!����������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� �����������������!���������!������������������?�(��!�������������������!���@������������������������

����������������'�#� ���(��'��������������!����

�9 �� ����� ���%���#����������������������D�8��!�����E���������� � �����������������

���������������������!���?�������������������������!@���������������������������'������ �����������(�'����(� ��������&������������������

�����������������������������(��"�����������������������������(�

�9 (� ����� �����������������������������#���������� � �����������������

)�����������������������������������������!��������������������?��!����!��$�������������@�'������ �����������(�'����(� �����������������������������������������������������!��'����������(����������������������!���

�����������������������������(��"�����������������������������(�

�9"�� ����� �������� ������#���������������#������!������������� � �����������������

�2���:����������������� ��������������������������)")�������������������������������������������� ��0�����������������"�9����!���2��0��������$��������������(�����������$�����K���������������!�����������

'������ �����������(�'����(� ���������������������������)")���������������������������(�����������"�9�� ���������������������$�������

���������������������������K������?��!�����������@���������������$�����������������������������������������������������������������������������!�������������������������'�#� ���(��'��������������!����

�9"�� ����� �������� ���������1�����������������%���#�.����������������� � �����������������

�2���:����������������� �����(�+��������������������)��������������+12��+ N���+<1����7�7��!�����������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� '��$������+�����������������)��������������������������������������)����������(�������$��������!������

��(�?����!�����������������������(����������������!���������!������������������������������@�������������(������������������������������'�#� ���(��'��������������!����

�9"�� ����� �������� ��������������������#�����������#���������� � �����������������

�2���:�����������������)���������!����)�����������������������������������������������������������?��!�������$����!����������@�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� '��$��������������������������(�����������������)��������������������������������������)����������(

������$��������!���������(�?����!�����������������������(����������������!���������!�����������������������������@��������������(������������������������������'�#� ���(��'��������������!����

�9"�� ����� �������� ���8��!����������������#���A������������������ � �����������������

�2���:����������������� ���������������!������������������������������������������������(����7��������!�F��������

Page 236: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��$%

��������� 11�F1 �����)����S���9���6B

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ����������������(����������������������������F�����������������������������������������!��������

����������������'�#� ���(��'��������������!����

�9��� ����� �������� �����������������#����������*�')3*����������� � �����������������

�2���:����������������� �����������������������������������!�?��(�����/" 5'/"@���������������J�F=1�?����������������������������������@���������$�J�#���������(��������������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� +��(��������!�����0������������������(������������������%�������������������������F=1�

����������������'�#� ���(��'��������������!����

�9��� ����� �������� �����������8�#�����������*�')3*����������� � �����������������

�2���:����������������� ��������������������������������������������K�����(�� ���$�������K������������������������������������$���������!(���!�����!�!����

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ���������������(���������������������������

�����������������������(������������������������������������������������������?������������!�������@� ��������������������������?��������;%L=����������������� @����������" 11�0�B�'��6�9/" �:, �P<1�� Q����������������'�#� ���(��'��������������!����

�9��� ����� �������� �����������������%�������9��� ����� �������� �����������������%���������������� � �����������������

�2���:��������������������������� G�L11�����+���������������������������7�7!���������� G�L 1�����+�����������������������������7�7!)�������������!�����������!�������������������!����������������������+��#�?���������������������������7�7!@���+��H�?���������������������7�7!@�� ���������������1����������� ���������� 2����������2��������������������������������������(�����������������������" 1�+��#�2�F1 �D 11�I211�T<11�B 111O�5����2���������������������7�7!

'������ �����������(��)����������!��������������)����������������"��#������������'����(� )�����������������������������������!$�����$����������(����+��#�������+��H������� ����������������

��������������������������������������������������'�#� ���(��'��������������!����

�9�9� ����� �������� �������%�����������������#�9��� ����� �������� �������%�����������������#���������� � �����������������

�2���:��������������������������� G�LG1�����+���������������������������7�7!���������� G�L;1�����+�����������������������������7�7!)�������������!������������������$����!��������>��������������!����������������������+��#�?���������������������������7�7!@���+��H�?������������������������������7�7!@�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ������������������!�������������������������������������$����!������������������������������

����������������'�#� ���(��'��������������!����

����� ����� �������� ���%���#�%���������������#���������������� � �����������������

�2���:�����������������)��E'���������������������M�?��(�����6)B B�# @�������$����������������!��������������������������?��(������6B����@���������������������������������!��?������������!����$�������1���3@�H������$�������������������������������������2��<�����=�����������������F= ������������;��N�����3�����������������F=2������������(����������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 5�!������������!���������������6B�����������������������������

����������������'�#� ���(��'��������������!����

����9 ����� �������� ���%���#�%���������������#��������������� � �����������������

�2���:�����������������+��������������!�����!������$����������������!�������������������!��$��

'������ �����������(��)����������!��������������)����������������"��#�����������

Page 237: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��$&

'����(� +��(��������!��������������������'�#� ���(�

����� ����� ��������������������� ���������������:���������� � �����������������

�2���:�����������������5�!�����!�������������������������������������������������!����������������������������!��������?��!��'�5/#���!�������������'�/'F�����������'�5/#���������������:������@�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ����!���������!��������������(�

����������������'�#� ���(��'��������������!����

����� ����� �������� �����#�� �����%����������������������� � �����������������

�2���:������������������<���#���!+����������!�����!�� ���������������������!�>�������������������� �������������������!��������������������#5)��������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ������������������������������������������������!������������������������������������������������!���

����������������������������������+0�<G111��)-�<+5��-A�+'*�.5�$5;��������������������������������������������������������!���������������������� �����������������������������������������������������������������7�������������������211N1�5;�*�=+.5�$5;+/�6<�����������������'�#� ���(��'��������������!����

����� ����� �������� �����#�� �����#���������������#����������#���������� � �����������������

�2���:������������������<�������������� ����������������������������!�������������!��������������������H�������+��������+N1�������������!�������������������������� ����������������$����������������7�����������������7����������������������������������������������������������������(�����#5�/"�����#5�/B�5����!������5����������?������������������#5/#%#5/#�@/�������!������#�����������?+= �7�+=G���+=1�����#���@�����������#�����������?�������������������#�����+<%+=%+G@�5����������?#5�/"%#5�/B��������������������#�����+<%+=%+G@���������5����������?+N1%+<��+=��+G���������������������7�������������������@

'������ �����������(��)����������!��������������)����������������"��#������������'����(� �������������!����������������������������

H���+<��+=���+G�����������K������������������������������������!�������������������������������'�#� ���(��'��������������!����

����� ����� �������� ���%���#��#!��������������������������������� � �����������������

�2���:�����������������+����������!�����!� ���2�������������������5. B /������������������������������������������$���������������������? 7�<�������!�����=���������@�� �����!�������$���������(�������������������!���5���������$���������� �7=����7��������������������������������?����������������/"6)"�,�. �/+,�"�:6�@����������$����� �7�<�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� +��(��������!�����6��!��� �7�<���=�������������������

����������������'�#� ���(��'��������������!����

��� � ����� �������� ��������������������#����������%�='*�*����������� � �����������������

�2���:���������������������� �����!���������������������������������F��������B /�/"��E �����������������M������$�������2� ������������������������������(����>����������������������������������������� ��������� ���(���B /�/"������$�������<� ������!������������������+1;���B /�/"�������������$�����������������������!�������=�/�����������������������$��

'������ �����������(��)����������!��������������)����������������"��#������������'����(� +��(��������!�����0�����������������������������B /�/B

����������������'�#� ���(��'��������������!����

���"� ����� �������� ��='*�*����������#���������� � �����������������

�2���:����������������� ��������������������?B /�@�������������������������������(����$��������������

Page 238: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��$#

'������ �����������(��)����������!��������������)����������������"��#������������'����(� +��(��������!�����0�����������������������������B /�/B

����������������'�#� ���(��'��������������!����

���9� ����� �������� ���%���#����#���:������)/'='*�=���������� � �����������������

�2���:����������������� �������������������!����������5. B /����5. B /�B�����(�������������������!����� ������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� +��(��������!�����)��������!����������������������$������_

����������������'�#� ���(��'��������������!����

��"�� ����� �������� ���!��� ��������������8��!������������ � �����������������

�2���:������������������<����������������������������!�����(����������������!�����������������������!�������(�������������������������������������?�����(��������������������������$��������������@���������H������������������5�������������(���������D��T�����������H����������������������������������(���������D��I������T���!������ '�"#+) �

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ���$���� ������������ �(������� '�/')� ?�@����������!����!�����(������ �������������������� �� ���

������������!����!�����������������'�#� ���(��'��������������!����

��"�� ����� �������� ���!��� �����#�8���������#���������� � �����������������

�2���:������������������<��������������������������)������������������!������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 0�������������������������������$���������!��������������������

����������������'�#� ���(��'��������������!����

��" � ����� �������� �������8��!��� ���������%�����������������!����������#�����#�����8������������� � �����������������

�2���:������������������<��������������������������)����������������������(���������$����!�����!�����(�������������!�����?�������!��������$��������������������������(����@��������������$����!�����$������������������ ���������������������������!���������������$������������������������������������������������������������V

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ��$�����!�����(��������������!��������(����������������$�����

0����$�����������9�(����'/ �������������������������������������!�������������" 11�'/ ����������������'�#� ���(��'��������������!����

��9�� ����� �������� ��������������#��������%���������� � �����������������

�2���:���������������������!��$�����������������!������������!�������������������(������-B�������'"0�������'"0+������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 4������������������������!����������������!������������!��������������$��$��������(�

����������������'�#� ���(��'��������������!����

��9�� ����� �������� ���������!���������#��#���������� � �����������������

�2���:�����������������0������� ��!�����!� ���� ����� ���$����� ���� ���� ��(���� 0)�+/"� �����!�� �� ����!� ���� ���� ������!�������������"��������)�������������������������!�����(����������������������!�E0)�+/"M�������������������������������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ���$�������������F��������0)�+/"���(���"��������������!�������!������������$��������������!���

����0)�+/B�)��������������21 G1�F�/0�,'�#� ,4�6.�#P23Q��������E0)�+/BM������������������!�����������������'�#� ���(��'��������������!����

��(�� ����� �������� ���!��� ��%���#��#��8����������� � �����������������

�2���:������������������<�������������������������������������������!�����������������������!��������������!�����

Page 239: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��$!

��A �D����#���������������#E����������������$������������!�����������FL=���FLG�2��A �D����#���������������#E� �����$��?����@�����F;<�����!���������������(����������!������������������V�78�?F;<���������2���F�!�����F<<��F<< �����F<<2����������� ���F�!���@�<��A ����A ��D����#�������E����������������$������������!�����������FL=�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� .�����(�����������(���FL=���FLG�������������������!���������

������F<<�����������F;<���������������������������!������������F1 �����������������'�#� ���(��'��������������!����

��(�� ����� �������� ���!��� ����������#�������������#���������� � �����������������

�2���:������������������<������������������������������������������������������������!�������?F<<��F<< ��FLG��FL;@�������������������������������������������������������������!�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ����#�$������������������������������������������������������(��������

����������������'�#� ���(��'��������������!����

��(�9 ����� �������� ���!��� ����������#����������#��������������� � �����������������

�2���:������������������<���#������������)��������������������?FN=�����������������������@����������������������������(�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 5�!����+G���#5/#%#5/#���������������������$��������������������!����

����������������'�#� ���(��'��������������!����

��(�� ����� �������� ���!��� �����#���#����1������������ � �����������������

�2���:������������������<��������������������������"������������!���������������������������A �?�����������������������@���A ��?�!�������!@�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ��� ������� ����� ����� ��� ��!������� ��� ���� �������� !�����(� ���� ������ ���� ��������� ���������

������������D�78�)��I�78�S��T�78�9����������������'�#� ���(��'��������������!����

��( � ����� �������� ���!��� ����������������������#����������������� � �����������������

�2���:������������������<��������������������������)��A �?�����!�����������������@������������������������������!���������������������������������$����(�B����!��������������������������������������������������������!�����(���������������!����������������������������������������������D�78�)��I�78�S��T�78�9B�����������������������������-C�NC�4�����������������������������!��������?����������!��@����2�����������������������������$�������������#:

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ���!�����������������������������������������������$����(�

����������������'�#� ���(��'��������������!����

��("� ����� �������� �������8��!������������������#���������� � �����������������

�2���:�����������������"�!�����(�����������!���������������!�?F<<@�������!�������!�?F<< ��F<<2@�� ���!�����(����������$���������������������������������������������������������������" 11�F<<�T=11�92�O�������������2����������������T�=11��"211�#5/#�1�O����������������������"21 �FL1�F<< �T7G1�972�O������!���T�7G1���������������"212�F<<2�TG�O��������������������$�������������"21<�#G11�+1<�O���������!���������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� #����(�!�����(������������������!����������������������

����������������'�#� ���(��'��������������!����

��(9� ����� �������� ���!��� ��)�*�������������#���������� � �����������������

�2���:������������������<��������������������������B��������!��������������?����(�����������!����@��������������������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 5�!��������������������������������#5�/"����������$��������

����������������'�#� ���(��'��������������!����

Page 240: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��$'

��(9� ����� �������� �����#�0�!��� ��)�*=:���������� � �����������������

�2���:������������������<��������������������������B��������!�������������������������������������������7��������������)�����������!������������������������������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 5��������������������7��������������������������!������� ������������������+<��+=���+G�������

����$���������������������������'�#� ���(��'��������������!����

��(99 ����� �������� ���������##���������� � �����������������

�2���:�����������������"�#���������������������!�����������������#�������������(�������#5/#����������+G��������������������������������(����������������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 0������������������

����������������'�#� ���(��'��������������!����

��(�� ����� �������� ���!��� ���%�������������������� � �����������������

�2���:������������������<��������������������������"�����������������������!$�������!�������!�?F<< ���F<<2@�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 5�!�����������������������������������#���P���Q�?����������������@O����������������������!$����(����

�!��������������������5��$���������������'�����������������+1<"�!��$���������������'�����������������+1=����������������'�#� ���(��'��������������!����

��(�� ����� �������� ���!��0���#�� �������������������������������� � �����������������

�2���:������������������<��������������������������+��������������!�����!�� �������%��������������������!��������������������������������� ������������������������������%�������������!�������(�������������������(�����56��

'������ �����������(��)����������!��������������)����������������"��#������������'����(� +��(��������!���������EF� ?@M�

����������������'�#� ���(��'��������������!����

��(�� ����� �������� �����#�� ���������������#����#������������%���������� � �����������������

�2���:������������������<���#������������+����������!�����!�� ������������������������������������������������������� ������������������������������?�������������@�����������������������(���������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� +��(��������!�����0��������������������!��������!�

����������������'�#� ���(��'��������������!����

��(� ����� �������� ���!��� ���������#���#�����������D1����������%E���������� � �����������������

�2���:������������������<�����������������������������������������?#�$����@�������!���������������$�����>�������������!��$��$�����

'������ �����������(��)����������!��������������)����������������"��#�����������'����(� �����!��������������������?#�$����@������������$���0������!��������������������������$�����>������

������������?��!��F2G�#1@�����������������'�#� ���(�

��((� ����� �������� ���!��� ���#������������������ � �����������������

�2���:������������������<��������������������������#5�/"�� #5/#� �� #5/#�� ���� ����� ��!�������� ����� �������� ��K���� ��� ������ ����������!� �(�����������!���+0��".+,�"�#���������������%��������������������!��(�����

'������ �����������(��)����������!��������������)����������������"��#������������'����(� '���������������!��(�����

����������������'�#� ���(��'��������������!����

��(� ����� �������� �����%��!��0���#�� �������8�����%������

Page 241: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��$(

���������� � ������������������2���:������������������<���������������������������������!����������������������������������$��������%��������������(�����$��������5�����������������J� ���������%���������$���������������������J� ���������%�����������������������������56�������������(����������������

'������ �����������(��)����������!��������������)����������������"��#�������������������� 5��������������������%��������������%����������!�����������������(��������������������(�����56��

����������������'�#� ���(��'��������������!����

��(�9 ����� �������� ���������#����%��!��0���#�� �����#��������������� � �����������������

�2���:������������������<���������������������������������!������������������������������������!�������%���������������������������������%���

'������ �����������(��)����������!��������������)����������������"��#������������'����(� J����!��������������!�(���+0�?��������+0���/.56�,�D)#,�@

J���������������������!��������������������'�#� ���(��'��������������!����

����� ����� �������� �����%�������������<�0�<�������!��� ���������#���������� � �����������������

�2���:������������������<�������������������������� �����(����0��?<������������@�������(����������������(������� ��������������������������!�������������������������!��������������������������" 11���0�?< G@

'������ �����������(��)����������!��������������)����������������"��#������������'����(� '�������������(����0�������������(���"��������(������(�!�5��?5��������������@�

)�����������������(���������������������������������������������������������������������������(������(���������������7�������+0�<1�<11�-�+3*'+5;����������!�������������+0�<1�< 1��3*'+-�+.*</,*+0�<1�<21��<-�),5F+-�+.*</,*����������������'�#� ���(��'��������������!����

����� ����� �������� �����%�������������5�)������!��� ���������#���������� � �����������������

�2���:������������������<�������������������������� �����(����5�)�?5���������������)��$�@�����(�����������C���������C��)������������������������!��������������������������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� )�����������(���"����������������������(������5��(������(�!�5��?5��������������@��)�����������������(

����������������������������������������������������7�������+0�<1�<11��-�+3*'+5;�����+0�<1�< 1�3*'+-�+.*</,*�����������������������(������������������!�����������!�������������+0�<1�<21��<-�),5F+-�+.*</,*����������������'�#� ���(��'��������������!����

����� ����� �������� �����%�������������5��������!��� ���������#���������� � �����������������

�2���:������������������<�������������������������� �����(����5���?5�����������������!��$�@�����(�����������C���������C��)������������������������!��������������������������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� )�����������(���"����������������������(������"��(������(�!�5��?5��������������@��)�����������������(

����������������������������������������������������7�������+0�<1�<11��-�+3*'+5;�����+0�<1�< 1�3*'+-�+.*</,*�����������������������(������������������!�����������!��������������+0�<1�<21��<-�),5F+-�+.*</,*����������������'�#� ���(��'��������������!����

��� � ����� �������� ���%���#��������������!��0���#�� ���������#���������� � �����������������

�2���:������������������<�����������������������������������(����������!����1�7�<GL�LLL������������!���������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 5�!������������������!��1�7�<GL�LLL�

����������������'�#� ���(��'��������������!����

���� ����� ����������������&������� ����������#�������������

Page 242: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��%

���������� � ������������������2��������������%��������� �������$������������������������������� �����������������������������!�����7����������������

'������ �����������('����(� H��������������������������������������������'���������������������������

�����������������������������(��"�����������������������������(�

����" ����� ����������������&������� ����������#����������������������� � �����������������

�2��������������%��������� ����������?��!�����S/F����������������������������������@������������������������������������������������

'������ �����������('����(� ������������!������������������������������

�����������������������������(��"�����������������������������(�

����9 ����� ����������������&������� ����������#���������� � �����������������

�2��������������%���������/�����������������������������������������������(������������������"�9����������������������������������������������������S/F����������������������������������!�������������$������S/F��$����������������������������������#�����(�

'������ �����������(��������!���+0� = ��"�:6�,�6�'+,+�#9'����(� ������������!������������������������������

�����������������������������(��"�����������������������������(�

����� ����� ����������������&������� ����������#����������������%���������������� � �����������������

�2��������������%��������� ����������������������������������

'������ �����������('����(� '����(����������������������!������������� ����������������������

�����������������������������(��"�����������������������������(�

����( ����� �������� ����8������������������������� � �����������������

�2��������������%��������� ����������(���(���������������#��������

'������ �����������('����(� ������������!������������������������������

�����������������������������(��"�����������������������������(�

����� ����� �������� ����8������������������������������#���������� � �����������������

�2��������������%��������� ����������(���(���������������'���������������������������

'������ �����������('����(� ������������!�����������������������������

�����������������������������(��"�����������������������������(�

����� ����� �������� �������������#�����������#���������� � �����������������

�2���������������%����������I����$�������$���������������������!���������������������������$�����

'������ �����������('����(� �����������������������!�������

�����������������������������(��"�����������������������������(�

����� ����� ����#�����������������#���������� � �����������������

�������!������$������!����������������!�����������������'������ �����������('����(� ������$������!�������������������������������!�����������������!��������!���

�����������������������������(��"�����������������������������(�

����� ����� ����������������&������� ����8������������������������ � �����������������

�2���������������%���������� ��������������(���������������'�������������������5�!����������������!��++����������������������?)") @�������(���������������'�����������

'������ �����������('����(� '�����������������������!�������������

Page 243: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��%�

�����������������������������(��"�����������������������������(�

���� .�#������� ������� ����#�����&������� ���������#���������� � �����������������

�2���+���!�����������<���������������%���������� �������!���������������������������������� �������!��������(������������������'�������������������5�!�����������!�������������. /������(�"��#���� ����������������������!����S/F�����?��!��������������������@��B�������������!�����������(��������������!�����. /��������������+0�����V

'������ �����������('����(� ���������$��������'�������(�����������!�����������!�������$�������������������������!�����������!

������������$���(� �����������������������������(��"�����������������������������(�

����" .�#������� ������� ����#�����&������� ���������#���������� � �����������������

�2���+���!�����������<���������������%����������)����������������!�����!������78+0�'�B

'������ �����������('����(� ����������������������������

�����������������������������(��"�����������������������������(�

����9 ����� �������� ���������������������������#���������� � �����������������

�2���������������%����������)�� ���$����!����������� ������������(���(������������������� ����� ����������������� ��� ���� ������������!�������������?���!��>������������������!@������������������������(����������������� ���2��������������������������������������������������������������!�

'������ �����������('����(� 6���������!������������������!��>���"������������(��������!����

�����������������������������(��"�����������������������������(�

����� ����� ����������&������� ����������#�������������������������� � �����������������

�2���������������%����������'������!���������������!���������(�����������)��������������������������$��������������!����������!������� ���2��������������������������������������������������������������!�

'������ �����������('����(� 6���������!������������������������"������������(��������!����

�����������������������������(��"�����������������������������(�

����� ����� ������������ ��#��������������������������� � �����������������

�2���������������%�����������������������������������������������!��������������(������������V�?B������������������������������!@

'������ �����������('����(� �������������������������������������������������������'�������(�

�����������������������������(��"�����������������������������(�

����� ����� �������� �������������#C��������������������������� � �����������������

�2���������������%���������� ������������������������������������������������������������B��

'������ �����������('����(� 5�����'�#� ���(

�����������������������������(��"�����������������������������(�

����� ����� �������� ���������#8����#���������� � �����������������

�2���������������%������������������������������������$��

'������ �����������('����(� H�������������������������������������������������'���������������������������

�������������������������(��"�����������������������������(�

���� ����� ����������������&������� ����������#�������������������������� � �����������������

�2���������������%���������� ������������������!������������������������������$������������!��������� ����������������������������!������������������������������������������������&�����������

'������ �����������(��)����������!������������'����(� ������(�������!�'����V

�������������������������(��"�����������������������������(�

����" ����� ��������&����������������������������������#������������� � �����������������

Page 244: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��%�

������!�����������������!�������!���!���������!��)��������������������������(������(��������������������������������!���������!�� �������������!������������������������������������(������������������������������������������������������������

'������ �����������('����(� #�$������������++������������������������E5�!����/��M�

�������������������������(��"�����������������������������(�

����9 ����� ����������������&������� ����������#����������������������� �����%���������� � �����������������

�2���������������%�����������<���������������%���������� ��� ����� ���� ����� �������� ����� �� ���� �� ���7���� ����!�� ?����!�� �� �������� ����� +0��� S/F�$������!���!�>�!������@�������!���������������� ��������������!����������������#�������(���������������!������������7��������!����������������������������+0�������������"�9�������������������������������

'������ �����������('����(� '����������� �������������������������(��"�����������������������������(�

��� � ����� �&�)�#�������#������������� ���������������#��8���!���������������������� � �����������������

�2���:���������� ������!��!����������H�) +���#� +���6��'+�����+#F���������������������������"��������������������!��!���������� ��$��$����(�������������������������������������������!�"���������������(������"�9�?���H�) +�����������$���"�,����@��B����������������������������(������������������������?���������������@�������������"�����������������������"�������������������(����!�����$����$����������������������#��������������������

'������ �����������(��)����������!��������������)���������������������������������!��>��'����(� 5�!������������������"����������������������$�������������������"�������

��������" 1�#� +" G�# /5'�O������������������"������"21��6��'+����������������"��#������'��������������!����

�(��� ����� �������� ����������8��#!��������������������� � �����������������

�2���:�������������������������������������������������!����������������(�$������������$���� �������(������� ���$��������(������������������������������������������(��>�����������������������?1�7�<2�N;;@�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ���������������������������(����������������������������������������������������>��

����������������'�#� ���(��'��������������!����

�(� � ����� �������� ���#�����8��#!��������������������� � �����������������

�2���:�������������������������������������������������!����������������(�$������������$����2�������(������� ���$��������(������������������������������������������(��>�����������������������?1�7�<2�N;;@�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ���������������������������(����������������������������������������������������>��

����������������'�#� ���(��'��������������!����

�(�"� ����� �������� ����������!����#!���������� � �����������������

�2���:�������������������������������������������������!�����������������$�����������������������������������������!����(��!��������������������������H���!�����������������������*+�,����PDQ������O�����!�����(�����D������������!�����������������O������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 0������������������������������!���������������?��(����� '�B//B@���������������������������������

���������������������'�#� ���(��'��������������!����

�(�9� ����� �������� ���������%������������� � �����������������

�2���:�����������������/���������!������$���������������������������������������������� '�"#��'/ ��#��6����+)''/'����������������������������#��6�����������!$�������!��$����������������������*5,.)B'PGQ����#��6��?D��72� 2<@ ��������������������������������������(���������������(����'3��������������? '�"#����������1@3'����������?'/ ���������� @�����������!�����?#��6�����������<@

Page 245: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��%$

.-���������!�?+)''/'����������=@�����(�������������������(����������!����$�����1�� ��<��=��������������������������������������D�������������������(����������������' 1�*5,.)B'P*��,)B'".+��D��' Q��������������!����������' 1�*5,.)B'P*��,)B'".+��D�� Q

'������ �����������(��)����������!��������������)����������������"��#������������'����(� �������������������������(�����������(�������$���O���!���������������������������������������1�111

1 ���LLL�LLL�LL�����������������'�#� ���(��'��������������!����

�(�(� ����� �������� ��#�����������G������#���������� � �����������������

�2���:��������������������������������������������������7���������$�������?��!�����(�����$������@����������������������������!�������������$�����������������������������������������(����$��

'������ �����������(��)����������!��������������)����������������"��#������������'����(� '��$��������������������7����������(�����$����������������"����!�����)������������������������������$��

�������!���������������������������������'�#� ���(��'��������������!����

�(��� ����� �������� �����������������#���������� � �����������������

�2���:�����������������������������������������������������������������������������$�������(�����$��������*5,�0�P�Q�������������������������?��� �7�2G@*5, //6����$��0��������?�����!��������@*5, //66�P�Q����$��������!���?��� �7�<@*5, //6'����$���������������!����������������������������$���(�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 5�!���������$���������������������"����!�������������!������(�����$��������

��������" 11�F������� G�0 �����6BH��������������7�������������������+0�22�GG1�'**,+�$5�A6+.*<6"���������������+�������+0�22�G;1�'**,+�$5�A6+.+�*<6+�������������������!�)���������������������������������������$������������������������ �����������������������������$���������������������(����������+���������������!������������������������'�#� ���(��'��������������!����

�(�(� ����� �������� ��������8��8������#��#���������� � �����������������

�2���:����������������� ��������������(���������������������������!�����7���

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ����������������'�#� ���(��'��������������!����

�(���� ����� �������� ���������<��������������� � �����������������

�2���:�����������������)�����������(���������������������������0��������?�����!��������@���������������>���������������������$�������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ��������������������"���������!����

J�������������!���������0�����!������_�)���������!�������������������������0 �������������(����$��J� �������������5 �7�52G�������_ ����������������������!���������$������������������$���(�����������!�������������������������!�����4�2=����������0���������������(�����$��������*5,05���P����Q������������������������� ������ ����!���������0������5����������������5����������������'�#� ���(��'��������������!����

�(��� ����� �������� ���������'��������������� � �����������������

�2���:�����������������)�����������(��������������������������� ��������?���������@���������������>��������������������$�������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ��������������������"���������!����

J������������������ �����!������_J� �������������5 �7�52G�������_

Page 246: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��%%

����������������������!���������$����������$���(�������������������!�������������������������!�����4�2=����������0���������������(�����$��������*5,05���P����Q������������������������� ������ ����!���������0������5����������������5����������������'�#� ���(��'��������������!����

�(��� ����� �������� �������#���������%��������������� � �����������������

�2���:������������������������������������������������������������������!��������������������������������(����!����������� ������ ��� ���� �$�$��� �� ���� ��������������!� ���������(���� ��� ��������� ��� ������� ���� ��� ���� ������������������ ���������������������!��������������������������������������������������������!����!��������������������������������!������$��

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ����������������������������(��(���������* �,05 P���Q���1��������������

����������������'�#� ���(��'��������������!����

�(��� ����� �������� �����������%���������������� � �����������������

�2���:�����������������)����������������������������������$���� ����������������?(��@��������������B�������������������������������������!�>�����������(���!�����!�* �,+55;���R��"R�� ��������������(����������������!�>�������������������!$����(�R��"R���$��������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� �����������"����!���������������������'�#� ���(��'��������������!����

�(� � ����� �������� ��<������:�����#8�#�����#���������� � �����������������

�2���:�����������������)��������������������������������0���������������������������������������?������� �������@�������(�������������������0�����������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� �����������"����!����

����������������'�#� ���(��'��������������!����

�(�"� ����� �������� ���%���#�#������������������������ � �����������������

�2���:�����������������)�������������������������(��������������������������K�����(�����!�������������������(������������������!������������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� �����������"����!����

����������������'�#� ���(��'��������������!����

�(�9� ����� �������� ���%���#�#��������������1����������� � �����������������

�2���:�����������������)�������������������������(�����!�>�����������������������K�����(�����!�������������������(������������������!�����������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� �����������"����!����

����������������'�#� ���(��'��������������!����

�(��� ����� �������� ���%���#�#��������������1������������������� � �����������������

�2���:�����������������)�������������������������(�����!�>�����������������������������K�����(�����!�������������������(������������������!�����������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� �����������"����!����

����������������'�#� ���(��'��������������!����

�(�(� ����� �������� ������G�8G����&��������%���������������� � �����������������

�2���:�����������������+����������������(�����$��������������������������������������7�(7���������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� +��(�"����!��������!������$��������������������������������(�����$�������������!���7�����$����������

������������������������������������������'�#� ���(��'��������������!����

�(9�� ����� �������� ���!��� ����������#!����!������������ � �����������������

�2���:������������������<��������������������������

Page 247: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��%&

��������!���������������������!���������������������������(������)����������0���������������������������������!�����������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� '��$����!�����!������������������!�����������?�)���������0�@���������"���������!�������������

��������$���������������������!�����)�����!���������������+0�<1�G11��-�<6;+5;+5��-A�+)*�+'57?�����!��������!�����@ ����������������������!�������������!���������������!����������������������������������������+0� ��������������������?�����$����� ���2@�+0� 1�L11��-�<6;+5;+,6�A'$+)*�+'57+�+0� 1�L21��-�<6;+5;+,6�A'$+)*�+'57+�?"����������������� ��%2��������!����@#��������$������1�+������$������;1+0� 1�L 1��-�<6;+5;+)*�+'57+��>?+0� 1�L<1��-�<6;+5;+)*�+'57+��>??5����������� ��������!����@� ����������������������������������? ����������!������������$��+0� 1�L11@�����������������'�#� ���(��'��������������!����

�(9�� ����� �������� ���#!����!��� ������$������������8���������#��8#���������� � �����������������

�2���:������������������<�����������B�����������!����������R-���������(����R�������������$�������������$���������������������1�������������������?��!��40)�����������!���@������$���#�����������������������(��������!���������������������������!������ ������������� ��������� �������(�������� ��������� �� ���������� �������������� ������$�����

'������ �����������(�'����(� H�����������������������������!����������������������$������8�1��������$���������������������

�����������(����������������������������"������������������������(�

�(9�� ����� �������� ���%���#��#!������#!����!��� ���������� � �����������������

�2���:������������������<�������������������������� �����!������������������������!���������(���������������������!����������5�������������������������������G;���������������������������$���������7�������������������<1�G11-�<6;+5;+5��-A�+)*�+'57��������� ��������!�����������������������������!����(�=1?+0� 1�L11�-�<6;+5;+,6�A'$+)*�+'57+����=1@�" 11�F���.�����?G;@

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 5�!�������������!����������������"���������!���������������������������!����������������������������

������������K�����$����������������������������&�����������!������������

�(��� ����� �������� �����������������#��!��� ��������������������� � �����������������

�2���:������������������<�������������������������� ��������(����������$�$������������������������������ ���������������������������������������������$��������(�?������@�������������������� ����������������������������������������������$������� 11�����������������������<11��" 11�FL1�F11���<11" 1 �5'�#� /"��� 11�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� �$����������������$���������(����������������������������!������������������������������������������7

�������������(����'35=**=�����������������'�#� ���(��'��������������!����

�(��� ����� �������� �������������!��� ����������������������������������������� � �����������������

�2���:������������������<�������������������������� ���������������������������(����5/#���5/#�����$�$������������$��������������� ����������������������$����������������!�����

'������ �����������(��)����������!��������������)����������������"��#������������'����(� '��$������5/#���5/#����������� ���������������!��������������$���(���������� ���������������

'�B//B�����������������'�#� ���(��'��������������!����

�(��� ����� �������� ����!��������������������#�������������#��!��� ���������� � �����������������

�2���:�����������������

Page 248: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��%#

�<��������������������������)�����������(��������������������!�������������������������������?FNG@���������$�$������������$��������������B�����������������������������������������

'������ �����������(��)����������!��������������)����������������"��#������������'��$��FNG�������������������������!��������������$���(�������������������������� '�B//B����������������'�#� ���(��'��������������!����

�(� � ����� �������� ��������������������������������#��!��� ���������� � �����������������

�2���:������������������<��������������������������)�����������(��������������������!��������������������������������?FN=@���������$�$������������$��������������'����������������������������������������������V

'������ �����������(��)����������!��������������)����������������"��#������������'����(� '��$��FN=������������������������������$�$���������������������������������!��������������$���(

����������������������������� '�B//B�����������������'�#� ���(��'��������������!����

�(�"� ����� �������� �����#�����������#������������#��!��� ���������� � �����������������

�2���:������������������<�������������������������� ���������!�������������������������������$�$��������������������������������!�����(������ ��������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� B������������������������������������

����������������'�#� ���(��'��������������!����

�(��� ����� �������� �����������!#G�����#��������������#���������� � �����������������

�2���:����������������� �����������������������������������(����B5������������������� ����������������������������������������������$���������7�������+0�<1�;11�=-;+)*-�'+)*��>?�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� 5�!������(����B5���������������������� ���2�

�������������������������2�����������������D �����T2�" 11�FNG�B5�2�D �1�T2�1����������������'�#� ���(��'��������������!����

�(��� ����� �������� ���!��� �����������!����#��������������� � �����������������

�2���:������������������<���������������������������������������������������������������������������� ������������������J�FN=�?���������������������@J�FNG�?����������������@��)����!�����(������������������������������������������������������������������������������?+0�� 1111��D�/"B,+��-�D,"�+�, �:@�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� .�����������������������������!�����!�

����������������'�#� ���(��'��������������!����

����� ����� �������� �������#������������������������������ C��������#� "���������� � �����������������

�2���:������������������<���"��������!�������������>���=����������������� ������������������������������������������������ ����������������������������������������������������� ��������!������!������(� ��)������������������!�������������2�������������������������������������������<�� �7����������������>����������$���=��)����������������������$��������<������������������������>������������������$�����������$�����G�� �����������������������������������������?��!��$����������>�����!���������������������������������������>���@;��5�������>���������������������������� 1���������������N�� �7����������������>����������������������������>���3��)�����������������������L��5�������>�����������$���������������� 1��)�������������F���������������������>���������� ����������������������������������$����� 2��/�����������������������������

'������ �����������(��)����������!��������������"��#������������'����(� +��(����������������������>�������������+0���������������������������(��"��������������������

Page 249: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��%!

��������(�

���� ����� �������� ������G��������������������� ������������%��#C��������#� "���������� � �����������������

�2���:������������������<���"�������������������7���������������>���=������������������������������������������$���!�������������>��� ���������������!$��������������������������������� ��������!������!������(� ��)������������������!��������������2��������������������������������������������<�� �7����������������>����������$���=��)����������������������$��������<������������������������>������������������$�����������$�����G�� �����������������������������������������?��!��$����������>�����!���������������������������������������>���@�;��5�������>���������������������������� 1����������������N�� �7����������������>����������������������������>���3��)�����������������������L��5�������>�����������$����������������� 1�����������������������������������������>���� ��/������������������������������ 2�� ��� ������� �� �������� >���� �����������(� ���$�� �������� ���� ������� ������� ?�������7�����������������@� <� =���������������������������>��������������������� G� ;��"���������(����������������������>���� N��"���������(�����������������������������

'������ �����������(��)����������!��������������������������������!��>����)����������������"��#������������'����(� ��'������������������������������(����$����������>����?+0@�

2��+��(��������!����J��0�������������������>����J��5���������!���������������������"��#������������������!����

����� ����� �������� ����������������#��������������G��������������������� :���������� � �����������������

�2���:������������������<���5�������>��������� �����������>���������������������������������D��. ��������������������!����������������� �����������������(�����������������������(�������������FN=��+<1��+ N�

'������ �����������(��)����������!��������������������������������!��>����"��#������������'����(� +��(��������!����

����������������"��#������������������!����

����� ����� �������� ���%���#������������#����=;����������� � �����������������

�2���:����������������� ��������!�$����������$�����������������������1��E0�����������$������!�������������M ��E#���������$������!�������������M�

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ����������������'�#� ���(��'��������������!����

����� ����� �������� ���%���#������������#����=;�'���������� � �����������������

�2���:�����������������/��(��������!��1�1�7� 11�1���$�����������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ����������������'�#� ���(��'��������������!����

����� ����� �������� ���%���#������������#����=;�2���������� � �����������������

�2���:�����������������/��(����$��$������������!�>�������$�����������������������

'������ �����������(��)����������!��������������)����������������"��#������������'����(� ����������������'�#� ���(��'��������������!����

�� �� ����� �������� ������&�=���������������������������� � �����������������

�2���:������������������������������������������������������������������������������������������+0�*+",B'�+�,B)"�, '�"#�����K������ �

'������ �����������(��)����������!��������������)����������������"��#�����������'����(� +��(���!����������+0�*+",B'�+�,B)"�, '�"#��� �

����������������"��#������������������!����

����� ����� ���!��� ������������������#

Page 250: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��%'

���������� � ������������������2��������������������������������������!�����������������������������������!���!��������������������������������������������������������� �� ���� +0� <=1<1� 36=)+.5;+�5.+<-�'� ?������ � �� ���������!@�� ? ��� ����� ������ ��8� ��������������#��@�

'������ �����������(��)����������!��������������"��#���������������"��#������������'����(� ���������<����������������������

�� ���$���������������+0�<=1<1�36=)+.5;+�5.+<-�'������������0������������������������������������� ���� ��!���!� �� ���������� ���� ��� �� ���� �������� ���� ���� ������� ���� ���� $����� �� ���� +0�36=)+.5;+�5.+<-�'��������������$�����������+0�����������(�2�� ��������!�������������$����(�����56��������������/��������������������������������(�������������������������!����������"�%56�����������?�����������V�������V�����V�56������V�������!���@�<�� �������������������������������������(��������������������$�����������������������������������������$���!�����������������������'�#� ���(��'��������������!����

����� ����� ���!��� ���������������������������� � �����������������

�2�����������������������������������!���!���������2�������������������������������!������������������������������!����$�������5�����2���������������������������!������������������������������(������������������������������������ ���������������������������������������������������������������>�����������������������!��(���������$�!���������������������������!����!���?��!��$�%���$����!�@�

'������ �����������(��)����������!��������������"��#���������������"��#������������'����(� ������������������#�������������������������������$����(���!�������������������������������������������

7������������������������������������������(������������.�����!����������������������������$����(��������������<=121�36=)+B6,*+�653�$+�5.��H�����������������������������������������������������������������!����E0���6�'� )/"�'�B�'�"���5/)" ��55'/��-M���������$�����������������������������"�9?0:�< �7�=3��0:D� 2�N@�J�-���������H��������_�#���������_J�#��������.������!���_����������������'�#� ���(��'��������������!����

����� ����� ���!��� ��1�������������������#���������� � �����������������

�2�������������������������� ���>��������������������������#����������������������������5�����2��������������������������������������>������������������������������������������������������!%�����!���!��������56������������!���E0���6�'� )/"�'�B�'�"���5/)" ��55'/��-M�?0:�< �7�=3��0:D� 2�N@�����!$���������!!���������� �������������������������������!!�����������������>������������������������������������������������<=1;136=)+.5;+.53463+<-�'�� �����������$�������>�����������!�����������!�$�����$��������������������!��$��������������������������!�����?B����(�������&����������������$������(��(�����56���������!����@

'������ �����������(��)����������!��������������"��#���������������"��#������������'����(� ����������������&������������������������������������������������������������������������������������>��

��������!���������������� ����������������!�������������������������$���������56���(���������)�����������������������<=1;1�36=)+.5;+.53463+<-�'��������������������$�����!�����������������������������������2�>������������ ����!������������������������!��������������������������������'�#� ���(��'��������������!����

���� ����� ���!��� ����#���������������� � �����������������

�2��������������������������)�����������!��(����������������7�����������������������������������������������&������������������������������������������������������������������������������������<=<11�6��+36=)+.53463+<-�'�� ��������������������������������$�!��������������������������$����������������������������$����!�$����(�����������!�������������������������!���!���

'������ �����������(��)����������!��������������"��#���������������"��#������������'����(� 0����������������������������2��������������������������?�������������������������$��@�� ���$�����?����

��21�11������-��������������@�����������������������������������<=<11�6��+36=)+.53463+<-�'���������������������������������������������!�����������������������$�����������������������'�#� ���(��'��������������!����

����" ����� ���!��� ���������������������������� � �����������������

�2��������������������������)�� ����#�����G��##� ��������������8���� ��������������������������� ���������� �����������������!��������� ?���7�������+0��<=1;1�36=)+.5;+.53463+<-�'E��"� ������������ �� ��K����� ���������7������������ ?������������!�������������$�������@�� �����$����������������(����������� �������������������� ����������!���������<=1;1�36=)+.5;+.53463+<-�'C��������������������������������������������������������������������!������������������

'������ �����������(��)����������!��������������"��#���������������"��#������������'����(� 0������������#��������������2��������������������������?�������������������������$��@�� ���$�����?����

Page 251: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��%(

��21�11������-��������������@�����������������������������������<=1;1�36=)+.5;+.53463+<-�'���������������������������������������������!�����������������������$�����������������������'�#� ���(��'��������������!����

����9 ����� ���!��� ��������������������������#���������� � �����������������

�2���������������������������������7����������������!�����������������������������������������?��!�������������������������!����������������������!��(����������$�����������������������(������@�

'������ �����������(��)����������!��������������"��#���������������"��#������������'����(� ������������������������������������

J�#��$������������!�?0:�2 �7�23��0:D�2� @J�+������!��(����������$���?0:�2 �7�23��0:D� �G�����0:D� �;@J� ��$����!���(�A���7�����!�?0:�2 �7�23��0:D�3�;�����0:D�3�N@J�B����$��������1 ��� ���7�������+0� <= 1�36=)+�F�,6+�3����������� ����� ����� ���� �$�$��� �� ���� �������7���������������!�G�&�����������7����������������!��"��#����������������������!��&�����������7����������������!��"��#�������������������!��G�&��������7����������������!�� ������������������������������������������������!���K�������?H������������������������ ���$�������������������������������������������������������2������������@�����������������'�#� ���(��'��������������!����

����� ����� ���!��� ����������������%�����8��������#���������� � �����������������

�2��������������������������)��������2�������������������������?�������>�������@�������������������������������������������������������$����(��������������������������������? ���������������������������������(������������������������������!���!�������������������������� �������������������� �����������(������������������������������������@�5�����2� �� ���������� ?���� ���� �� ������� �������@����� ���������������������� �������������������(� ���� �!������� ������ �� )�� ���� �������� $����(� �� ��� �������� ����!� ���� 2��� ��������� �������������!����������������������������������������$����(��<=1=1�36=)+B6,*+�653�$+.534634����(�����������<G G1��)-�<+<6�+B6,*+'*,

'������ �����������(��)����������!��������������"��#���������������"��#������������'����(� '����������+0����������������$����(�<=1=1�36=)+B6,*+�653�$+.53463����%��������������+0�������

$����(����������<G G1��)-�<+<6�+B6,*+'*,�����������������'�#� ���(��'��������������!����

����( ����� ���!��� ���������������������#������#������������ � �����������������

�2��������������������������:���������������!�<=211��"�,'�B5,+/0����;��������2�F��������`�!�V

'������ �����������(��)����������!��������������"��#���������������"��#������������'����(� '�����������<=211��"�,'�B5,+/0��b��������>������F��������������������!������

����������������'�#� ���(��'��������������!����

����� ����� ���!��� ��3��1����������������1�������������.��8������������� � �����������������

�2��������������������������2����������������������������!�<=211��"�,'�B5,+/0����;V�

'������ �����������(��)����������!��������������"��#���������������"��#������������'����(� +��(���������������<=211��"�,'�B5,+/0������������������!������������������

����������������'�#� ���(��'��������������!����

���9� ����� ���!��� ����#������#�����%���������� � �����������������

�2�������������������������� ��������������������$��������S/F��������!��������$����!���(�������������$����!������������!�������$����� ��������������������$��������S/F��������!��������$����!���(�������������$����!������������!������$�������������������������

'������ �����������(�'����(� 0�������������������������������$�������(�������������&!���(����$����������������������������������$��

���������������������������7�7!�����������(�?����������!����0:�< �7�=3��0:D�2�2@������������(�����!��������������������������"���������������������

���9� ����� ���!��� ����#������#��������������������� � �����������������

�2�������������������������� ���������������(����$���!�$���������$����!���(�������������������������!����������

'������ �����������(�'����(� 0�������������������������������$�������(�������������&!���(����$����������������

�����������(�����!��������������������������"���������������������

���9� ����� ���!��� ������#8�����%���������� � �����������������

�2��������������������������

Page 252: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��&

��������������$���������������������S/F�����$������&!���(����������������������������-��$��������������������������� ��)����������(����$����!����!�����(�����?����!�������������7����������������0:�2 �7�23��0:D� 2�;��0:D� 2�N�0:D� ;�;��0:D� ;�N���0:D�21�;�����0:D�21�N@��2��)����������(����$����!���������������?����!���������7����������������0:�< �7�=3��0:D�3�;�����0:D�3�N@�<������������$�������������������������(�����������������!�����(������$�$�����������������(����$����!��S/F������(����������������������(��

'������ �����������(�'����(� #������$����!�����!��������������������������������������������!�����(�����

�������������������������(��"�����������������������������(�

���9 ����� ���!��� ��<3=C�='*�*�C�!���������������������������������������� � �����������������

�2�������������������������� ������������$��������������?��!�����������!@����������������������$����������������

'������ �����������(�'����(� H�����������������������������������������������������������������������������������E'����M����������

0'B������!����������������������������(��"�����������������������������(�

���9" ����� ���!��� ��������#!������#!����!�����N*A���#���������� � �����������������

�2�������������������������� �� ��������(��������!���������������$�����������������(���S/F�����?�(� ������!�����@��-��$������������������!���������$�����������������������������2�� ����������������(������������������!�������)����������������$����!���������!������������������������������������������������������������!���������!����������������������������������������������

'������ �����������(�'����(� �������?�����@����������������!��������(������������������������

+0� 1�L11��-�<6;+5;+,6�A'$+)*�+'57+�+0� 1�L 1��-�<6;+5;+)*�+'57+�+0� 1�L21��-�<6;+5;+,6�A'$+)*�+'57+�+0� 1�L<1��-�<6;+5;+)*�+'57+���������������!��������������������������������������������$�������������������������������(��"�����������������������������(�

���99 ����� �����������#������%���������N*A���#���������� � �����������������

��������(�����������������$����������������������S/F�����������$���������������������������������������������������������������������������������$����������$���

'������ �����������(��)����������!�������������'����(� )��������$��������������������������$����S/F��������������������������������������������$�������������7

�������������� ����� 211L1��)-�<+<6=+.5�'63+�)-�<�� )�� ���� ����� (�� ��$�� �� ���� �� ������� �� ���)535.6'63�������!�������������������(��C#� )"F0� �C�����CS/F�0� �C�������������������F��������A�9������� ���S/F��������������������������������P��%��$Q��?)��1���%��$����������S/F���������������������������$�������!���� �� ���� ���7������� +0� <21G1� N*A+36B+B6,*� �� �� ���� ����� �� ����� ���$����� $����(� <21=1N*A+36B+B6,*+35)-<E: �����$��������������S/F������������$������(�����!�!�����F������������A�9���A�"��������������������������(��"�����������������������������(�

���9� ����� ���!��� �����%����������#�����������:�5!��0���#�� ���������8���������� � �����������������

�2���������������������������<����������������������������������������$�����S/F�������$���������������������������%�����������������������$���������1�

'������ �����������('����(� ��$���������������%��������������������������������$���

�����������(�����!��������������������������"�����������������������K�����

���9( ����� �������� ���%�������%�����8�����!��0���#�� �����������L����1��:���������� � �����������������

�2���:������������������<��������������������������'�$������� ����� ���� ����� ��!������� ��� ��� ���%�������� ���� ���� $����(� ���� ��� ��!������� �� �����!�������$�����������������������K������>���

'������ ������ �����(�� )��������� �!����� ���� ����� "�� #��� ����� ������� "�� #����� �������� 6/��6'��� )/"��/+5:6/�9H) -'�/'F�����������������!��������(

'����(� J�������������������!�����J�#����(��������������������56��������������40)������������J�#����(����������������!�����������������!������*#�,/#�)66,4�6/���������������������'�#� ���(��'��������������!����

����� ����� ���!��� ���������%���������8��!������������ � �����������������

Page 253: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��&�

�2����������� �����������������(������EF�����(����M�������� �����������������������$��������S/F��������!�����(�����)�� ���� �����$����2��� ?�������� �������� �(����@� �� �����(��� �� ���� C5���C� �������� ����� ��8� �������8��!������������$�������(����������������������(�V�?.�������+���������������(����O�����������!���������������$�������(����!��������������(��������������������������@�

'������ �����������(�'����(� ����������������!��������������������������!�����(�����������(������������$���������������������$����

�����������������(����$���!�����CH�#%+�#C���(���������������������������������������������������(��"�����������������������������(�

����� ����� ���!��� ������#8�����%���������� � �����������������

�2�������������������������� ��������(���������������(����$����!���������������� ���������������������������������!�����(����� ��$����!���������������������������S/F���������!��2�������������������� �����!�����(������ ���!�������������7����������������0:�2 �7�0:�23��0:D 2�;���0:D 2�N2����������������� ���!���������7����������������0:�< �7�0:�=3�0:D3�;���0:D3�NH������������������������������������������������������������������������������������!�����(�������������������V

'������ �����������(�'����(� 0��������������!�����(�����������������$����!�������������������������������������

�������������������������(��"�����������������������������(�

����9 ����� �����������#�����#��#����������8��!����N*A���#���������� � �����������������

��������(�����������������$���������!�����(�������S/F�������������(�������������������������������������������������������������������������������$���

'������ �����������(��)����������!�������������'����(� )��������$��������������������������$����S/F��������������������������������������������$�������������7

�������������� ����� 211L1�#5)"0,0�B,+�# �',#5)"0�� )�� ���� ����� (�� ��$�� �� ���� �� ������� �� ���5�'�+� �'�������!�������������������(��C#� )"F0� �C�����CS/F�0� �C�������������������F��������A�9������� ���S/F��������������������������������P��%��$Q��?)��1���%��$����������S/F���������������������������$�������!���� �� ���� ���7������� +0� <21G1� N*A+36B+B6,*� �� �� ���� ����� �� ����� ���$����� $����(� <21=1N*A+36B+B6,*+35)-<E: �����$��������������S/F������������$������(�����!�!�����F������������A�9���A�"��������������������������(��"�����������������������������(�

���(� ����� ���!��� ����������#�#�������������8�#��������������� ���������� � �����������������

�2��������������<���EAM���E7M ������������$���������������!������!����������������!�������������������������������������!������������������� �����������������$�����

'������ �����������(�'����(� #����(������������!���������+��(�+0����#H������������5����(����$�����������#H�����������

�����������(�����!��������������������������"�����������������������������(�

���(� ����� ���!��� ����������#�#�������������8�#������������������ ���������� � �����������������

�2��������������<���EAM���E7M ��������(����������������������������!������!������)������!�������������������������������!������������

'������ �����������(�'����(� 5��������>�����!������������������������������$����!����!��?����������5/#���B��_@��������������

��������������������?���$����2��������������������@������������(�����!��������������������������"�����������������������������(�

���(� ����� ���!��� �����������#!����!������������ � �����������������

�2������������� ��������(����������������������������!������!������)������!�������������������>���������B��)"0�D7�D)#���������!���������������������������������������!�����

'������ �����������(�'����(� ���B��5/#7�D)#������������������(�����������������������������������������������������������!�����

���������!���������������������!���������������+0�<1�G11��-�<6;+5;+5��-A�+)*�+'57+0� 1�L11��-�<6;+5;+,6�A'$+)*�+'57+�+0� 1�L 1��-�<6;+5;+)*�+'57+�+0� 1�L21��-�<6;+5;+,6�A'$+)*�+'57+�+0� 1�L<1��-�<6;+5;+)*�+'57+������������(�����!��������������������������"�����������������������������(�

Page 254: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��&�

���( ����� ���!��� �����������������#���������� � �����������������

�2������������� ���������!������!�����������������������������������������(����������������$������40)�����������������������$���"��������!�������������������������������������(�����40)������������������������

'������ �����������(�'����(� "���

�������������������������(��"�����������������������������(�

���(" ����� ���!��� ��������#!������������������ � �����������������

�2��������������������������B����������!������!����������������������!����������56������!$�����������������������������$������������������

'������ �����������(�'����(� ���������������!������������!$����(�����56���������������������������(��)�����������!��������������������

����������������������������������!��������������������������������������������������������������������!��������������+0�<1�G11��-�<6;+5;+5��-A�+)*�+'57+0� 1�L11��-�<6;+5;+,6�A'$+)*�+'57+�+0� 1�L 1��-�<6;+5;+)*�+'57+�+0� 1�L21��-�<6;+5;+,6�A'$+)*�+'57+�+0� 1�L<1��-�<6;+5;+)*�+'57+������������(�����!��������������������������"�����������������������������(�

���(9 ����� ���!��� �������������������8��������������������� � �����������������

�2������������� ������������������������������!��$���������������������������(����!����$���������!����S/F�����

'������ �����������(�'����(� ����������������$����!�����

�������������������������(��"�����������������������������(�

���(� ����� ���!��� ��������������������#������������#������������������������� � �����������������

�2������������� ����������������!�����������!��$�������+�������!������������������������������������������������������������

'������ �����������(��)����������!��������������"��#���������������"��#������������'����(� 0������������������!�������������56��������������������������������������56����!���������������������

�����������������������!������������������������������'�#� ���(��'��������������!����

���(( ����� ���!��� ����������#�������������8�#��������������� ���������� � �����������������

�2��������������<���EAM���E7M ������������$����������������!����������������!��������?��$���������������������@����������������������������!�������������������� �����������������$�����

'������ �����������(��)����������!��������������"��#�������������"��#��������������'����(� #����(������������!���������+��(�+0����#H������������5����(����$�����������#H�����������

����������������'�#� ���(��'��������������!����

���(� ����� ���!��� ����������#�������������8�#������������������ ���������� � �����������������

�2��������������<���EAM���E7M ������������$����������������!����������������!��������?��$���������������������@����������������������������!�$��������!�������������� �����������������$�����

'������ �����������(��)����������!��������������"��#�������������"��#��������������'����(� #����(������������!���������0����$��������!��������������#�������!�������������������������

����������������'�#� ���(��'��������������!����

����� ����� ���!��� ����#������������#������%����#���#������������������� � �����������������

�2�������������"�����������������������!�������������������������������$����(��������������������������������

'������ �����������(�'����(� )����������������������K�����������������������������$�����

�����������(�����!��������������������������"�����������������������������(�

����9 ����� �����������#���&����%���#�����������%����%����������#������������������������������ � �����������������

��$�������������������������������������������������� ���������������������������!����������$�����������������������!���������������������������������������������������������

'������ �����������(

Page 255: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��&$

'����(� �����������������������������������������������������(�$����������������������������"�����������������������������(�

����� 5!��� ������%����������!#����������������:������������������#��!�����������:���������� � ��������������������������

�� ���E ��$������!�������������M�������������������!�����������BD#P�DQ� ��������������������?(��@������������������+0�<N111�� ����������������$����������!����(������������������������2��/��������������$������������!���������������D���D������������������������<��)��������(����������(�����!���������$����!��$�����������������������������������%������������������E ��$������!�������������M�������������$����� ��������������������!�������������+0��6�'+,'��� )/",�-�","/'��0I�?���������������(@�

'������ +���!�����������(�)�����������������������������������$�������������������$��+0����������������(�"��#�������������"��#��������������������������(��)����������!�������������

'����(� J����������������(��J�������+0�<N111J�)����������������$����������!�������������������_5���������'�������(����������������������������������������!����

����� 5!��� �������������#���!#��������������� � ��������������������������

/����������!������$������!�����������������������!������������������������������������������$����!�$������ ���� ����� �������� ��� ������ ���� ��� ��������� �(� ������ �� ���� ������� ����*+�,B)D�0,# /5,�6�'+,+�#9�� ��� ������ ���� ��� ����!������� �� ���� +0�6�'+,'��� )/",�-�","/'��0I�?���������������(@�

'������ +���!�����������(�)�����������������������������������$�������������������$��+0����������������(�"��#�������������"��#��������������������������(��)����������!�������������

'����(� ������������������!�����������������!��J�-����������$����!�����������������_J�)���������������������������������������!������������������������������������������J�)��������!������������������������������������!!���!������������������������J�-���������������$���������!�����!!���!��������������������!�_�-���������K�������������������!�_5���������'�������(����������������������������������������!���

����� 5!��� ����!#��������#�����������%���������� � ��������������������������

����������������������������$����������������������������������������������������������������(���������������� ��������������������!�������������+0��6�'+,'��� )/",�-�","/'��0I�?���������������(@�

'������ +���!�����������(�)�����������������������������������$�������������������$��+0����������������(�"��#�������������"��#��������������������������(��)����������!�������������

'����(� ���������������!�J�-�������������������������������������$����(������$����!��$��������!�����(�����_J�)�����������������������$������!�������������������(�����������_J�-�����������������������������������������(���'�#� _J�-�������56����������������������!�������!����_5���������'�������(����������������������������������������!����

����� ����� ���%���#����#���:� ���������������������������������8���������� � ���������������������!����������

�2���#������������ ���������������%�������!���������������!���������������������������������������5. B /���������

'������ �����������(��)����������������)����������!��������������"��#�������������"��#��������������'����(� +��(���!����������������������������������������������

����������������'�#� ���(��'��������������!����

����� ����� �����#�� ��������������#���������� � �����������������

�2���#������������)������� ���������������� ��� ���� ���� ��� ���������� ��� ���� ��� ��������(� �� ���� �������� �� ������%�����!�����������������$��� ����������������(�������������������!�����������������������!�����������������������������

'������ �����������(��)����������������)����������!��������������"��#�������������"��#��������������'����(� ��+��(������������!����?�������������������������@�

2�����������������%������!�������(���!�����!�J� +/"�?��������!@�J�FH5#/"�?����������@�����������������'�#� ���(��'��������������!����

Page 256: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��&%

���� ����� �������������#���������� � �����������������

���������������������������������������������$���������������� �����5. B /���"���������$���������������� �����������������������������������!����

'������ �����������(��)����������������)����������!��������������"��#�������������"��#���������������5�!��������!��������������������'�#� ���(��'��������������!����

����" ����� ������������)/'='*����������#�#�����='*�*=���������� � �����������������

����������������������������������������������� �����5. B /��� ����������������������������$����������������B /�/"������������$�����������!�����������������5. B /���������

'������ �����������(��)����������������)����������!��������������"��#�������������"��#��������������'����(� ������� ���� ��!���� �� ����������!� ��������� #������ B /�/"� �� ����� ���� �������� �� ����(� �� ����$�� ���

5. B /�������������������������'�#� ���(��'��������������!����

����( ����� �������� ���������������#�����������������%���������:���������� � �����������������

�2���:����������������� ���!$������$�������������!�����������������������������������������

'������ �����������(��)����������!��������������"��#���������������"��#������������'����(� +��(��������!����?�����������������������. /����@�� ��������������������������������������������

��������������?����������!������(���'�#� ����������������������������$�������'�#� ���������@�����������������'�#� ���(��'��������������!����

����� ����� ���������������� �������������������%&��%����#������������������������� � �����������������

�2���:����������������� �����������$���������������������������7������������������!�����������������$���������������(���������������� ��!������������(������������� ��������������� ��� ���� �����������#�����!(�����!�������������!�������!����!��������������(�����6�����������������(�����!����������

'������ �����������('����(� H���$����������������������(�������������������(����!������������(���������������!�������������������!

���!�����������������������������������(��"�����������������������������(�

����� ����� �������� �������������������%&��������������������������� � �����������������

�2���:����������������� �����������������������������������������������

'������ �����������(��)����������!��������������"��#���������������"��#�����������'����(� )����������!���������������$������?���������������@�������������!���R������!������������������!��

���������������������������!����!���������������?��!������������������!�@��)�����������������������������������������������������������S/F�������(�������������$�����������������������������������������!������������������������"����'�#� ���������������������� ������������������$��������'�#� �����������������'�#� ���(��'��������������!����

���9� ����� ���!��� ���%����#���������������#���������� � �����������������

�2����������������������������� $������ ���� ���� ��K������� ��� ���� ����� ���$���� ���� �� ��� ������� ���� �� ���� ������� ����B'�+�,/',�/''5/#,"/ �66/H�0�

'������ �����������(��)����������!��������������"��#�������������"��#��������������'����(� 0������������$����������������!��������������B'�+�,/',�/''5/#,"/ �66/H�0

����������������'�#� ���(��'��������������!����

��(�� ����� �������� ��!��� �����������������#8�#����#C�#����������� � �����������������

�2���������������������������<���:���������� ����������!�������������������(����+��#���+��H���������(����������������������������B������������������!�������������������!��������������������������?K������������������������@�� ������������(�������!�������������������������������������7��������$������������������������������������!�������$��������

'������ �����������(��)����������!��������������"��#���������������"��#������������'����(� 4���(�����������������������������!��������������������������!�����

������������������������������!������_����������������'�#� ���(��'��������������!����

��(�� ����� �������� ��!��� ������������������������������ � �����������������

�2���������������������������<���:����������)��R��������������������_

'������ �����������(��)����������!��������������"��#���������������"��#����������������������������'�#� ���(��'��������������!����

Page 257: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��&&

��(�� ����� �������� ��!��� ���������������#���������� � �����������������

�2���������������������������<���:���������� ������������������������������?������!������������������������������������������@������������$���������������������(������������

'������ �����������(�'����(� 4���(��������$����!��$������������������������������

J�)������������(�����������������������$��������������$�����������������������������������_J���������������������������������������������������������!������_�������������������������(��"�����������������������������(�

��(� ����� �������� ��!��� ����������������#����#C�#���������8��������������������� � �����������������

�2���������������������������<���:���������� ����������������������?V@��������������������������������������(����������$������������������������������7����������������

'������ �����������(��)����������!��������������"��#���������������"��#������������'����(� 7�����������

7������������������!�����������!7���������!�������������������'�#� ���(��'��������������!����

����� ����� �������� ����#�� ��������������������������������������� � �����������������

�2���#������������<���:�������������������������!�������!���������������������!�����������+=1�� �������+������������������������!�������!������������������������O*�G��������������M�B����������!�������!������!��?+=1�����&���������������������������������#@����������������������C/���7������������C�

'������ �����������(��)����������!��������������"��#���������������"��#������������'����(� :���������#������������K�������!�������!������!�������!������������7��������������������������

����!�����������7�����������������������������J�+1<��+1=��+1G���+= �����+=G����������������������!����J�)����������!����CF����������!��C�?0:�< �7�=3��0:D� ;�<@��������������������������������'�#� ���(��'��������������!����

����� ����� �������� ����#�� ������������������#������������L���#���������:���������� � �����������������

�2���#������������<���:����������������� �����K�������!�������!������!��������������������� ����������!�������!�����������(� ����56��������!��!�!��������������������������K�����!�������!�������������(�����"��"����H����$�����������������K�������!�������!������������(�������!�!����

'������ �����������(�'����(� 56�75�!��������!�����

�������������������������(��"�����������������������������(�

���(� ����� �������� �����#�� ����#����#������������������#����������������� � �����������������

�2���:������������������<�������������������������� �������������������������������!�F<<������!����������������������$����(���������������������������!�������������������

'������ �����������(�'����(� 5�!���������������������������������������������F2;�#����������������������������������������������

������(������������������!������=<�221�#5)"0,+�D,4�6/,F2;���������������������$������'����(� �������������������������(��"�����������������������������(�

Page 258: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��&#

������������������������������ ���� �� ��� ���������� ��� ���� ���������������*���������������������������������������� �������������������������������������

����� ������������������%�(���� 6/"F-/6���#6/ ��#6/ 2��5/�9� ��5/�9� 2���I�6�L1���I�6�L<���I�6�L=���I�6�LG���I�6�L;�'����(� 0�����������������!������������������(�������������

����� '���#������������(���� �I�6�3=���I�6�3=1���I�6�L;���I�6�LN�'����(� ����������������������������>�������������������������?������������������@�

����� .��������8����������8�#��#�(���� #6/ ��#6/ 2��5/�9� ��5/�9� 2���I�6�L<���I�6�LG���I�6�LN���I�6�L3�'����(� ���$��������!����������������4�')��������������!��(���������������������������������

����� 3����������������8�#��#�(���� �I�6��3 7L1���I�6�3=1��#6/ ��#6/ 2��5/�9� ��5/�9� 2��6/"F-/6��'����(� ���������������$�������������������������������������������������������������������������(����������$��$�����

�������������$����������������������������������

����� ������#��#���������������#�(���� �I�6��3;���I�6�3N���I�6�33���I�6�3=1'����(� 5���������#0)'�?��#0'����I�6�3=1@�����������!�������

���� ��������������L�����1���(���� -/6�# ��-/6�#2'����(� "�$����������������!����������������������������

����" �������%�������������������0�����#������(���� #6/ ��#6/ 2��6/"F-/6�.������� )�����������������>��������������!��������������������������������������������������������%���!����

������������(�������������������

����9 ��������#�������������(���� #6/ ��#6/ 2��5/�9� ��5/�9� 2��6/"F-/6����I�6�L1'����(� ���������������������!�����������!�������������!����������!�����������������������O�����������������

���������������������������������������������������!���

����� ������������#������������������������(��� -/6�#2��6/"F-/6���#6/ ��#6/ 2.������� )�����������������>������".+���)"0��������������������������������������!������������������

����( =�����#�������#������������8�#��#�(��� �I�6�3<.������� B���������!���������������������������������!�������

����� =����#������#����������������(���� �I�6�L=���I�6�L;.������� ������������������������X<���������������!������

����� '������#�����������8�#��#�(���� �I�6�L<.������� F�$�!���������!��������������!�������!�$�������

���� A���%��������������8�#��#�(��� �I�6�L<.������� J�'��%���������������������������!�$��������������������������!�$������

J�B��������������������������������������������������������!�����������������������

����" 5���%������%���������������#��������(���� �I�6�LG'����(� ������$��������������������������������������������������������!���������������!��������������������������

������������������������������

Page 259: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��&!

����9 ���������������8���������#�(���� �I�6�LG.������� )���!������������������������������

����� 6������������������������(���� �I�6�LG.������� �������������������������!����������������������������������(������������"�9������� 1L<1����� 1L<=�

G311��� G3 1�

����( ���������������������8���������#�(���� �I�6�LG.������� ���������!������������������������(�����������������������������������������!�������������(����������

���������

����� 2��������������#���������������#�(���� �I�6�L=���I�6�L;'����(� ������������������������ �����=�����������������������������������������!�������

����� =������������8���������#�(���� �I�6�L=���I�6�L;'����(� ������������������������������������

����� ���#��������8��������%�(��� -/6�# ��-/6�#2'����(� "������!��(��������������������(����������������!����������(���������������

Page 260: ˘ˇˆ˙˝˛˚ ˚˜ ˛!ˆ˘ ˘ˇˆ˙˝˛˚˚˛˜˘ ˇ˛˘#$ · WINNC SINUMERIK 810 D / 840 D MILLING KEY DESCRIPTION B 6 Machine control panel Depending on machine configuration,

�������������� ������� ���� ������������

��&'