ΠΡΟΣ: Όλα τα Μέλη Σας επισυνάπτotitle : price changes due to inflation:...

Λεωφ. Γρίβα Διγενή 38 & Δεληγιώργη 3, 1066, Τ.Θ 21455, 1509 Λευκωσία, Κύπρος T: +357 22889860 F: +357 22665685 E: [email protected] W: www.ccci.org.cy

Λευκωσία, 5 Νοεμβρίου 2019

ΠΡΟΣ: Όλα τα Μέλη

Κυρία/ε, Σας επισυνάπτoυμε γνωστοποιήσεις από Εθνικούς Οργανισμούς Τυποποίησης, μελών των Ευρωπαϊκών Οργανισμών Τυποποίησης CEN/CENELEC, που περιέχουν τους τίτλους προτεινόμενων εθνικών προτύπων. Σύμφωνα με την Ευρωπαϊκή Οδηγία που αφορά την πληροφόρηση σε θέματα τεχνικών προτύπων, μπορείτε, αφού μελετήσετε τους τίτλους: α) να ζητήσετε όπως λάβετε ηλεκτρονικά ολόκληρο το κείμενο του προσχεδίου εθνικού προτύπου, εάν αυτό είναι διαθέσιμο, β) να συμμετάσχετε στις συναντήσεις της τεχνικής επιτροπής του Εθνικού Οργανισμού Τυποποίησης που ετοιμάζει το προσχέδιο προτύπου και γ) να υποβάλετε εισήγηση στον CYS, να αρχίσει τυποποιητική εργασία σε Ευρωπαϊκό επίπεδο σχετικά με το θέμα της γνωστοποίησης, εάν φυσικά πιστεύετε ότι το εν λόγω εθνικό πρότυπο θα επηρεάσει την ελεύθερη διακίνηση προϊόντων, υπηρεσιών ή την κυπριακή βιομηχανία και οικονομία. Τυχόν σχόλια και παρατηρήσεις παρακαλώ όπως υποβάλλονται στον Κυπριακό Οργανισμό Τυποποίησης. Σε περίπτωση που δε λάβουμε καμία ανταπόκριση, ο CYS δε θα φέρει ένσταση στην προώθηση των υπό αναφορά εθνικών προτύπων. Για περισσότερες πληροφορίες μπορείτε να επικοινωνείτε με την κα. Μαριλένα Νικολάου, Λειτουργό Διοίκησης και Διεθνών Σχέσεων του Κυπριακού Οργανισμού Τυποποίησης (CYS), τηλ: 22 411439, Φαξ. 22 411511 και στην ηλεκτρονική διεύθυνση: [email protected] Με εκτίμηση, Ανδρέας Ανδρέου, Διευθυντής Βιομηχανίας, για Γενικό Γραμματέα. /ΜΚ.

mailto:[email protected]

http://www.ccci.org.cy/

mailto:[email protected]

Information procedure Page 1

Monthly Notifications Register

Notifications registered at CCMC from 2019-10-01 to 2019-10-31

Register issued on : 2019-11-04

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Subsector A06: BUILDING AND CONSTRUCTION SERVICES

Subsector : A06 Registration Date : 2019-10-28Organization : ASROCountry : Romania

Project ID : 167981NA/0001 Project Established

ICS : 91.120.10, 91.140.01National Ref : SR EN 16798-1/NATitle : Energyperformanceofbuildings-Ventilationforbuildings

- Part 1: Indoor environmental input parameters for design and assessment of energy performanceofbuildingsaddressing indoor air quality, thermal environment, lighting and acoustics - Module M1-6 National Annex

Relatedness :National : REV/AMD SR EN 16798-1:2019

Subsector : A06 Registration Date : 2019-10-02Organization : SNV Draft Issue Date : 2019-09-23Country : Switzerland Latest Date for Comments : 2019-12-15

Project ID : CH190016/0001 Draft for public enquiry

ICS : 91.010.20National Ref : prSIA 123Title : Price changes due to inflation: process with production cost index

Relatedness :National : REV/AMD SIA 123:2013

Subsector : A06 Registration Date : 2019-10-02Organization : SNV Draft Issue Date : 2019-09-23Country : Switzerland Latest Date for Comments : 2019-12-15


ICS : 91.140.01National Ref : prSIA 2024Title : Room usage data for energy and building services

Relatedness :National : REV/AMD SIA 2024:2015

** End of Subsector **

Subsector A99: UNDETERMINED

Subsector : A99 Registration Date : 2019-10-23Organization : ASICountry : Austria

Project ID : 00027757/0001 Project Established

ICS : 13.280, 13.300National Ref : ÖNORM D 2305Title : Decontamination of individuals after CBRN incidents - Requirements for on-scene

emergency decontamination

Scope : This Austrian standard specifies a procedure for emergency decontamination of individuals affected by a CBRN incident. Definitions of required terms are provided. Guidelines for immediate response measures to be provided by the emergency responders first on scene (before the arrival of specialised relief units or equipment) are established for use. This Austrian standard is part of an inter-organisational concept to ensure a seamless care for affected persons while building on existing regulations, in particular the fire-fighter strategies against hazardous materials and the rescue service guidelines for patient care.

Relatedness :National : New

Subsector : A99 Registration Date : 2019-10-25Organization : AFNORCountry : France


ICS :National Ref : XP X50-123Title : Umbrella company services


Subsector : A99 Registration Date : 2019-10-25Organization : AFNORCountry : France


ICS :National Ref : NF X50-006Title : Supplier/end-user relations. Taking up again of the comparative test results for products


Subsector : A99 Registration Date : 2019-10-25Organization : UNICountry : Italy


ICS :03.040, 03.100.01, 03.100.40

National Ref : UNI1606887Title : Non-regulated professions- Professionals in the field of innovation management -

Knowledge,skillandcompetencerequirementsScope : This standard specifies the requirements for the professionals in the field of quality

management.These requirements are expressed in terms of knowledge, skills and competence, in accordance with the European Qualifications Framework (EQF), in consistency with the identified tasks and specific activities. The requirements are also expressed in such a way to assist the processes of assessment and validation of learning outcomes, as well as contributing to their harmonization, as far as possible.



** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2019-10-10Organization : BSICountry : United Kingdom


ICS :National Ref : BS 8644Title : Digitalmanagementoffiresafetyinformationfordesign,construction,

handover and emergency response - Code of practice




ICS :National Ref : BS 9251Title : Firesprinklersystemsfordomesticandresidentialoccupancies.Codeof

practice


Subsector : B01 Registration Date : 2019-10-03Organization : NENCountry : Netherlands


ICS : 13.220.20National Ref : NEN 2555:2019 Concept nlTitle : Fire safety in buildings - Smoke alarms for dwellingsScope : NEN 2555 specifies non-ionizing smoke alarms with a fixed sensitivity, applied in dwellings.

The purpose of these smoke alarms is to warn people in the building against smoke formation using an acoustic signal.



Subsector B02: STRUCTURES



ICS :National Ref : BS 5930:2015+A1Title : Code of practice for ground investigations. Amendment




ICS :National Ref : BS 8081:2015+A2:2018 CorrTitle : Code of practice for grouted anchors


Subsector : B02 Registration Date : 2019-10-10Organization : BSI Draft Issue Date : 2019-10-01Country : United Kingdom Latest Date for Comments : 2019-12-01

Project ID : 01902979/0001 Draft for public enquiry

ICS :National Ref : BS 8004:2015+A1:2019Title : BS 8004 AMD1. Code of practice for foundations. Amendment


Subsector : B02 Registration Date : 2019-10-22Organization : UNMZ Draft Issue Date : 2019-10-25Country : Czech Republic Latest Date for Comments : 2019-11-15


ICS :National Ref :Title : Fire protection of buildings – Non-industrial buildingsScope : The aim of the modification is unification of the standard according to the other standards.

Relatedness :National : REV/AMD CSN 73 0802 (2009)



ICS :National Ref :Title : Fire protection of buildings – Industrial buildingsScope : The aim of the modification is unification of the standard according to the other standards.

Relatedness :

National : REV/AMD CSN 73 0804 (2010)



ICS :National Ref :Title : Fire protection of buildings – Assembly roomsScope : The aim of the modification is unification of the standard according to the other standards.




ICS :National Ref :Title : Fire protection of buildings – Buildings for dwelling and lodgingScope : The aim of the modification is unification of the standard according to the other standards.




ICS :National Ref :Title : Fire protection of buildings – Buildings for sanitary maters and social careScope : The aim of the modification is unification of the standard according to the other standards.




ICS :National Ref :Title : Fire protection of buildings - Builldings for telecommunication service and for post serviceScope : The aim of the modification is unification of the standard according to the other standards.

Relatedness :

National : REV/AMD CSN 73 0843 (2001)


Subsector B03: CONCRETE

Subsector : B03 Registration Date : 2019-10-21Organization : TSECountry : Turkey

Project ID : tst00498/0001 Project Established

ICS : 91.040National Ref :Title : Design loads for buildingsScope : This standard covers the calculation value of the loads to be taken in dimensioning the

structural elements (masonry, concrete, reinforced concrete, wood, steel, etc.) of housing, offices, government offices, schools, hospitals, sports facilities, entertainment places, garages and so on. This standart does not include the loads of structures like bridges, water structures, all kinds of industrial structures subject to significant dynamic effects and high voltage transmission lines and so on



Subsector B04: CEMENT

Subsector : B04 Registration Date : 2019-10-25Organization : NBNCountry : Belgium

Project ID : BE664083/0001 Project Established

ICS : 91.100.10National Ref : prNBN B 12-109Title : Cement - Low alcali content cement



Subsector B05: FIRE TESTS

Subsector : B05 Registration Date : 2019-10-18Organization : DINCountry : Germany


ICS :National Ref : 00518736Title : Fire behaviour of building materials and building components - Part 16: "Brandschacht"

tests; Amendment A1



Subsector B07: GLASS

Subsector : B07 (Secondary Subsector)

Registration Date : 2019-10-30

Organization : UNMS SRCountry : Slovakia


ICS :National Ref : STN 73 3443Title : Building work. Glazing building work. Requirements for glazing

Relatedness :National : REV/AMD STN 73 3443


Subsector B11: METAL STRUCTURES

Subsector : B11 Registration Date : 2019-10-09Organization : SNV Draft Issue Date : 2019-10-07Country : Switzerland Latest Date for Comments : 2020-01-07


ICS : 91.080.10National Ref : prSIA 263/1Title : Steel Structures – Supplementary Specifications

Relatedness :National : REV/AMD SIA 263/1:2013


Subsector B14: GEOTECHNICS

Subsector : B14 Registration Date : 2019-10-25Organization : AFNORCountry : France


ICS :National Ref : PR NFP94-270Title : Geotechnical design - Retaining structures - Reinforced and soil nailing structures



Subsector B19: CERAMIC TILES

Subsector : B19 Registration Date : 2019-10-21Organization : ISS

Country : Serbia Latest Date for Comments : 2019-11-15


ICS : 91.100.23National Ref : naSRPS B.D1.330Title : Ceramic tiles — Classification, characteristics, assessment and verification of constancy

of performance and marking of tiles of second and third qualityScope : This standard specifies characteristics for ceramic tiles of second and third quality



Subsector B20: DRAINAGE EQUIPMENT



ICS :National Ref : NF DTU 64.1 P2Title : Private (independent) sewerage systems - For private duvelling houses comprising up to

20 rooms - Part 2 : contract bill of special administrative model clauses




ICS :National Ref : NF DTU 64.1 P1-1Title : Private (independent) sewerage systems - For private duvelling houses comprising up to

20 rooms - Part 1-1 : contract bill of technical model clauses




ICS :National Ref : NF DTU 64.1 P1-2Title : Private (independent) sewerage systems - For private duvelling houses comprising up to

20 rooms - Part 1-2 : general criteria for selection of materials



Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT

Subsector : B25 Registration Date : 2019-10-25Organization : UNICountry : Italy


ICS : 91.140.40National Ref : UNI1606883Title : Gasmeasurementsystems

HourlybasedgasmeteringsystemsPart3:CTRProtocol

Scope : The technical specification describes the characteristics of the CTR protocol, defined by UNI / TS 11291-1. The protocol is designed to perform data transport functions with efficiency and safety, considering that it is implemented on equipment with limited processing capacity and / or particular communication systems, such as GSM-SMS which require the use of length-limited messages.

Relatedness :National : REV/AMD UNI/TS 11291-3:2014

Subsector : B25 Registration Date : 2019-10-25Organization : UNICountry : Italy


ICS : 91.140.40National Ref : UNI1606884Title : Gas measurement systems - Hourly based gas metering systems - Part 7: Gas meter

remote management Scope : The technical specification specifies the construction and functional requirements of the

Concentrator, Repeater, SAC and Gateway devices, defined in UNI / TS 11291-1 and used in the remote management system for the remote reading and remote management of the gas measuring devices installed in the delivery points of distribution networks

Relatedness :National : REV/AMD UNI/TS 11291-7:2013



ICS :National Ref : BS 8446Title : Installationandmaintenanceofopen-flued,non-domesticgas-firedlaundry

appliances - Specification


Subsector : B25 Registration Date : 2019-10-03Organization : NEN

Country : Netherlands


ICS : 23.040.20National Ref : NEN 7230:2019 Concept nlTitle : Plastics piping systems for gas supply - Pipes of high-impact poly(vinyl chloride) (PVC-

HI) - Requirements and test methodsScope : Specifications and testing methods for high-impact polyvinylchloride pipes made for

underground distribution pipes for natural gas with a maximum pressure of 20 kPa. The temperature of the natural gas has a maximum of 20 °C.




ICS : 23.040.20, 23.040.45National Ref : NEN 7231:2019 Concept nlTitle : Plastics piping systems for gas supply - Fittings of modified poly(vinyl chloride) (modified-

PVC) - Requirements and test methodsScope : This standard gives specifications and test methods for modified PVC fittings to connect

modified PVC pipes with sizes up to 20 m maximum, for underground distribution of natural gas.




ICS :23.040.20, 23.040.45, 91.140.40

National Ref : NEN 7232:2019 Concept nlTitle : Plastics piping systems for gas supply - Saddles with clamp connection of modified

poly(vinyl chloride) (modified PVC) - Requirements and test methodsScope : This standard gives specifications and test methods for modificated PVC saddles with

matching gas fittings applicable to brach lines of the mains supply of modified PVC with a nominal pressure of 20 kPa.



Subsector B28: FLOOR COVERINGS



ICS :National Ref : PR NF DTU 53.12 P1-1-4Title : Building works - Floor coverings and surfaces preparation - Part 1-1-4 : Plastic floor

coverings - Contract bill of technical model clauses



Subsector B29: AGGREGATES



ICS :National Ref : PR XP P18-546Title : Aggregates - Tests for géometrical properties of aggregates ¿ determination of prohibited

impurities and clay pellets contents



Subsector B31: HEATING SYSTEMS IN BUILDINGS



ICS : 13.220.50, 91.060.40National Ref : NPR 2759:2019 Concept nlTitle : Custom built chimneys for building related heating systems - Guidelines and examples -

Code of practice for NEN 2757-1 and NEN 6062 Scope : NPR 2759 describes custom built chimneys for building related heating systems. This code

of practice is applicable to new buildings, existing buildings and renovated buildings.



Subsector B33: BUILDING DESIGN

Subsector : B33 Registration Date : 2019-10-30Organization : UNMS SRCountry : Slovakia


ICS :National Ref : STN 73 3443

Title : Building work. Glazing building work. Requirements for glazing

Relatedness :National : REV/AMD STN 73 3443

Subsector : B33 Registration Date : 2019-10-24Organization : UNMS SRCountry : Slovakia


ICS : 91.010National Ref : STN EN 1991-2/NA/Z1Title : Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges. National Annex.

Amendment Z1Scope : The National Annex was published in December 2007. National determined parameters were

examined in certain projects. New amendment will change some parameters for actions on road bridges and combinations of actions on road and railway bridges according the experience gained. Parameters will be harmonized with those recommended in EN 1991-2.

Relatedness :National : REV/AMD STN EN 1992-1/NA:2007


Subsector B99: UNDETERMINED



ICS : 13.180, 97.140National Ref : NPR 8313:2019 nlTitle : Circular office and learning environment - Definitions and measurement methods Scope : NPR 8313 gives indications to realise the interior of dministrative spaces, offices and

educational environments. Relevant parts of Europeam standards are used.



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Subsector C01: Food products

Subsector : C01 Registration Date : 2019-10-18Organization : DINCountry : Germany


ICS :National Ref : 05702259Title : Analysis of honey - Determination of free acidity




ICS :National Ref : 05702260Title : Analysis of honey - Determination of ethanol content - Enzymatic method




ICS :National Ref : 05702261Title : Analysis of honey - Determination of glycerol content - Enzymatic method


Subsector : C01 Registration Date : 2019-10-30Organization : BDSCountry : Bulgaria

Project ID : BG032007/0001 Project Established

ICS : 67.080.20National Ref : prBDS 2509Title : Srerilized roasted skinned peppersScope : This document specifies requirements for red peppers of the kapiya variety (Capsicum

annuum L.), roasted skinned and srerilized, intended for direct consumption or for culinary purposes.

Relatedness :National : REV/AMD BDS 2509:1973


Subsector C99: UNDETERMINED

Subsector : C99 Registration Date : 2019-10-25Organization : AFNORCountry : France


ICS :National Ref : PR NF T70-500Title : Energetic materials for defense - Safety, vulnerability - Impact sensitivity - BAM impactor

test


Subsector : C99 Registration Date : 2019-10-25Organization : AFNORCountry : France


ICS :National Ref : PR NF T70-503Title : Energetic materials for defense - Safety, vulnerability - Impact sensitivity - BAM impactor

test



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Subsector F06: TERMINOLOGY PRINCIPLES

Subsector : F06 Registration Date : 2019-10-18Organization : DINCountry : Germany


ICS :National Ref : 10500710Title : Abbreviated forms for terms and names



Subsector F07: DOCUMENTATION AND INFORMATION

Subsector : F07 Registration Date : 2019-10-10Organization : BSI Draft Issue Date : 2019-07-31Country : United Kingdom Latest Date for Comments : 2019-09-30


ICS :National Ref : BS 8888Title : BS 8888. Technical product documentation and specification



Subsector F15: MATERIAL TESTING IN GENERAL



ICS :National Ref : 06235731Title : Testing of carbonaceous materials - Determination of tensile strength - Solid materials



Subsector F19: OPTICS



ICS :

National Ref : 02703087Title : Production in optical engineering - Fitting dimensions for tools and workpiece chucks with

cylindrical fitting



Subsector F20: QUALITY ASSURANCE

Subsector : F20 Registration Date : 2019-10-14Organization : UNECountry : Spain Latest Date for Comments : 2019-10-29

Project ID : P0051754/0001 Draft for public enquiry

ICS :National Ref : PNE 192007-1Title : Procedures for the regulatory inspection. Low voltage electrical installations. Part 1:

General requirementsScope : Describes the methodology for the authorised body to perform both the initial and the

periodic inspections foreseen in the current legislation to check compliance with the safety mandatory requirements applicable to the low voltage electrical installations.

Relatedness :National : REV/AMD UNE 192007-1:2017


Subsector F23: ENERGY

Subsector : F23 Registration Date : 2019-10-25Organization : UNICountry : Italy


ICS :03.120.10, 27.010, 91.140.01

National Ref : UNI1604716Title : Energy audits - Guidelines for energy audits of buildingsScope : This technical report constitutes a guideline for the application of UNI CEI EN 16247-2 on the

energyauditsofbuildings.This technical report constitutes a guideline for the performance of energy audits of buildings(forresidential,tertiaryorothersimilarpurposes).Thistechnicalreportprovidesindicationsandoperatingmethodsfor:-collectionandanalysisofenergycosts;- the collection and analysis of the available technical documentation and the definition of thecontrolsandofthebuildingandplantinspections;-thedefinitionoftheadjustmentfactorsofthebilledconsumption;-analysisofenergyservices;-theconstructionoftheenergyinventory;-calculationofenergyperformanceindicators;-identificationofactionstoimproveenergyefficiency;-cost-benefitanalysis;- evaluation of the priority of the interventions.

Relatedness :

National : New


** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Subsector H04: SPORTS EQUIPMENT

Subsector : H04 Registration Date : 2019-10-25Organization : AFNORCountry : France


ICS :National Ref : PR XP P90-400Title : Hypoxic systems - Guidelines for installation, operation and rational use of equipment




ICS :National Ref : PR NF P90-202Title : Sports halls ¿ Backing of floors for sporting activities ¿ Implementation




ICS :National Ref : NF P90-202PRTitle : Sports hall- Backing of floors for sporting activites - Implementation



Subsector H09: FURNITURE

Subsector : H09 Registration Date : 2019-10-18Organization : DINCountry : Germany


ICS :National Ref : 04201087Title : Kitchen equipment - Forms, planning principles




ICS :National Ref : 04201100Title : Graphite test for furniture surfaces



Subsector H13: JEWELLERY

Subsector : H13 Registration Date : 2019-10-25Organization : UNICountry : Italy


ICS : 01.040.39, 39.060, 73.080National Ref : UNI1606967Title : Diamond - Terminology, classification, characteristics and test methodsScope : The standard establishes the terminology to be used, the grading qualitative characteristics

to be considered, the instrumentation as well as the procedures to be applied, in the polisheddiamondgradingprocess.Thestandardappliesonlytounmountedfacetednaturaldiamonds.

Relatedness :National : REV/AMD UNI 9758:2003


Subsector H99: UNDETERMINED



ICS :National Ref : 02703221Title : Hands for watches - Nominal dimensions




ICS :National Ref : 02703222

Title : Hands for watches - Upper and lower deviations for holes and shafts


Subsector : H99 Registration Date : 2019-10-03Organization : NENCountry : Netherlands


ICS : 11.140National Ref : NTA 8190:2019 Concept nlTitle : Labels for matrasses Scope : Sustainablity and circularity are becoming more and more important. One of the great

challenges is to fit in the production of matrasses in the transition agenda. The first step is to make the composition of the matrasses transparent. This is important for the recycling business. This NTA determines agreements to stipulate the matrasses composition in a uniform way..



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Subsector I01: SCREW THREADS

Subsector : I01 Registration Date : 2019-10-21Organization : TSECountry : Turkey

Project ID : t1001449/0001 Project Established

ICS :23.020.30, 43.080.01, 75.160.30

National Ref :Title : Filling and discharge procedures for LPG - GeneralScope : This standard covers general filling and discharge procedures for LPG



Subsector I06: PRESSURE VESSELS

Subsector : I06 Registration Date : 2019-10-07Organization : LVS Draft Issue Date : 2019-10-08Country : Latvia Latest Date for Comments : 2019-12-09


ICS : 23.020.10National Ref : prLVS 350Title : Tanks. Technical examination of existing tanksScope : The purpose of this standard is to establish and assess risk factors and its influence to new

and used tanks safety usage. Results of assessment registered in protocol (annex A). This standard defines requirements applies to tanks classified in chapter 4. This document is not applicable for isothermic tanks with coating for liquefied substances storage in low temperatures

Relatedness :National : REV/AMD LVS 350:2014


Subsector I08: AGRICULTURAL MACHINES

Subsector : I08 Registration Date : 2019-10-14Organization : UNECountry : Spain Latest Date for Comments : 2019-11-18


ICS :National Ref : PNE 68114Title : Agricultural vehicles. Mechanical connections between tractor vehicles and towed

vehicles. Specifications for rocker hooksScope : This standard establishes the dimensional and design requirements of the rocker hooks used

in the union of agricultural tractor vehicles with trailers and agricultural semi-suspended implements.


Subsector : I08 Registration Date : 2019-10-14Organization : UNECountry : Spain Latest Date for Comments : 2019-11-18


ICS :National Ref : PNE 68115Title : Agricultural vehicles Mechanical connections in towed vehicles. Specifications for fork

hooksScope : This standard establishes the dimensional and design requirements of the fork hooks used in

the union of trailers and semi-suspended agricultural implements to agricultural tractors.



Subsector I09: SMALL TOOLS

Subsector : I09 Registration Date : 2019-10-25Organization : AFNORCountry : France


ICS :National Ref : PR XP E67-006Title : Additive manufacturing - Safety, hygiene and environment - Requirements for metallic

materials


Subsector : I09 (Secondary Subsector)


Organization : TSECountry : Turkey


ICS : 71.060National Ref :Title : Sodium sulphate- Anhydrous crystal - For industrial useScope : This standard specifies requirements and test methods for anhydrous sodium sulfate in

crystal form for industrial use.






ICS : 65.080

National Ref :Title : Fertilizers – Ammonium sulphate Scope : This standard specifies requirements and test methods for ammonium sulfate used as

fertilizer.






ICS : 75.100National Ref :Title : Lubricating oils, industrial lubricants and related products (Class L) - Miscelaneous oils

(GroupY)-Usedintractorsandheavydutymachines

Scope : This standard specifies requirements and test methods for lubricating oils used in tractors and heavy duty machines.



Subsector I15: EQUIPMENT FOR PETROLEUM INDUSTRY

Subsector : I15 Registration Date : 2019-10-23Organization : ASICountry : Austria


ICS : 23.040.99National Ref : ÖNORM M 7323Title : Provisions for the installation of stationary pressure vessels for the storage of gasesScope : This Austrian Standard shall be applied to the installation of stationary pressure vessels with

a pressure-volume product over 3000 bar for the storage of gases or gas overlaid ingredients which are subject to the Act on Pressure Vessels. Concerning the installation of pressure vessels intended for storage of LPG for burning purposes according to ÖNORM C 1301, the presentStandardisonlyapplicableforavesselvolumeexceeding13000litres.Hereinafter, these pressure vessels are considered including their equipment necessary for operationandreferredtoshortlyas¿vessels¿.Forvesselswithalowerpressure-volumepressure,thisstandardcanbeappliedanalogously.Product evaporators and buffer vessels are not used for the storage of gases according to thisStandardandare,therefore,notcoveredbythescopeofthisÖNORM.For the installation of vessels for deep frozen liquefied gases, the additional relevant requirements of ÖNORM EN ISO 21009-2 and/or the requirements of ÖNORM EN 14197-3 apply.The requirements of the present ÖNORM shall be applied to deep frozen liquefied gases only if they are not in contradiction with the requirements of the European Standards mentioned above or if they are declared mandatory by national provisions.

Relatedness :

National : New


Subsector I19: NUCLEAR ENERGY

Subsector : I19 Registration Date : 2019-10-25Organization : AFNORCountry : France


ICS :National Ref : PR NF M60-824Title : Nuclear energy - Measurement of radioactivity in the environment - Test method for the

analysis of tritium in free water and organically bound tritium in environmental matrices


Subsector : I19 Registration Date : 2019-10-18Organization : DINCountry : Germany


ICS :National Ref : 06235648Title : Construction of concrete hot cells - Part 2: Requirements for hot cells for automated

operation



** End of Sector **




Sector M : METALLIC MATERIALS


Subsector M01: STEEL

Subsector : M01 Registration Date : 2019-10-25Organization : UNICountry : Italy


ICS :77.020, 77.080.20, 77.140.01

National Ref : UNI1607030Title : Iron and steel products - Formalisation and managing of technical claims due to not

conformitiesScope : The standard defines the procedures for the formalization and management of technical

disputes in the presence of non-conformity of steel products.

Relatedness :National : REV/AMD UNI 11025:2003

Subsector : M01 Registration Date : 2019-10-10Organization : BSICountry : United Kingdom


ICS :National Ref : BS 8666Title : Scheduling,dimensioning,bendingandcuttingofsteelreinforcement

forconcrete. Specification



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Subsector N02: SOLID FUELS

Subsector : N02 Registration Date : 2019-10-15Organization : DINCountry : Germany


ICS :National Ref : 06235684Title : Testing of mineral oils and fuels - Determination of sulphur content (total sulphur) - Part

2: Combustion according to Grote-Krekeler, acidimetric titration, gravimetric determination



Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2019-10-14Organization : SIS Draft Issue Date : 2019-12-14Country : Sweden Latest Date for Comments : 2019-12-14


ICS : 75.100National Ref : 155470Title : Lubricants, industrial oil and related products – (Class L) – Requirements for

environmentally acceptable lubricating greases (family X)Scope : This document specifies requirements on health and environmental properties for

environmentallyacceptablelubricatinggreasesandtheirdesignation.This document does not specify requirements on technical properties of lubricating greases.


Subsector : N03 Registration Date : 2019-10-21Organization : TSECountry : Turkey


ICS : 71.060National Ref :Title : Sodium sulphate- Anhydrous crystal - For industrial useScope : This standard specifies requirements and test methods for anhydrous sodium sulfate in

crystal form for industrial use.




ICS : 65.080National Ref :Title : Fertilizers – Ammonium sulphate Scope : This standard specifies requirements and test methods for ammonium sulfate used as

fertilizer.




ICS : 75.100National Ref :Title : Lubricating oils, industrial lubricants and related products (Class L) - Miscelaneous oils

(GroupY)-Usedintractorsandheavydutymachines

Scope : This standard specifies requirements and test methods for lubricating oils used in tractors and heavy duty machines.



Subsector N14: PLASTICS PIPES

Subsector : N14 Registration Date : 2019-10-18Organization : DINCountry : Germany


ICS :National Ref : 11904490Title : Unplasticized polyvinyl chloride (PVC-U) drainpipes; Dimesions, requirements, testing


Subsector : N14 (Secondary Subsector)


Organization : NENCountry : Netherlands


ICS : 23.040.20National Ref : NEN 7230:2019 Concept nlTitle : Plastics piping systems for gas supply - Pipes of high-impact poly(vinyl chloride) (PVC-

HI) - Requirements and test methodsScope : Specifications and testing methods for high-impact polyvinylchloride pipes made for

underground distribution pipes for natural gas with a maximum pressure of 20 kPa. The temperature of the natural gas has a maximum of 20 °C.






ICS : 23.040.20, 23.040.45National Ref : NEN 7231:2019 Concept nlTitle : Plastics piping systems for gas supply - Fittings of modified poly(vinyl chloride) (modified-

PVC) - Requirements and test methodsScope : This standard gives specifications and test methods for modified PVC fittings to connect

modified PVC pipes with sizes up to 20 m maximum, for underground distribution of natural gas.






ICS :23.040.20, 23.040.45, 91.140.40

National Ref : NEN 7232:2019 Concept nlTitle : Plastics piping systems for gas supply - Saddles with clamp connection of modified

poly(vinyl chloride) (modified PVC) - Requirements and test methodsScope : This standard gives specifications and test methods for modificated PVC saddles with

matching gas fittings applicable to brach lines of the mains supply of modified PVC with a nominal pressure of 20 kPa.



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Subsector S01: ACOUSTICS AND SOUND INSULATION

Subsector : S01 Registration Date : 2019-10-23Organization : ASICountry : Austria


ICS :National Ref : ÖNORM B 8115-3Title : Sound insulation and room acoustics in building construction - Part 3: Architectural

acousticsScope : ThisAustrianStandardspecifiesrequirementsforroomacousticsfor

(a) rooms in which a good audibility - especially speech intelligibility - should be ensured, eg. eventspaces,classrooms;(b) premises where noise reduction is the primary objective, such as production areas, but also spaces where adequate intelligibility of calls (including telephone calls) is required, such as offices and other spaces where noise reduction is sought, such as staircases and corridors, kindergartens,swimmingandsportshalls,restaurants.Not treated are rooms in which extremely high demands are placed on the acoustic conditions, eg. as opera houses, concert halls, sound recording studios.


Subsector : S01 Registration Date : 2019-10-28Organization : ASROCountry : Romania

Project ID : 1957/101/0002 Project Established

ICS :National Ref : SR EN 16798-1/NATitle : Energy performance of buildings - Part 1: Indoor environmental input parameters for

design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics - Module M1-6 - National Annex

Relatedness :National : REV/AMD SR EN 16798-1:2019/NA:2019


Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2019-10-18Organization : DINCountry : Germany


ICS :National Ref : 11904442Title : German standard methods for the examination of water, waste water and sludge -

Parameters characterizing effects and substances (group H) - Part 60: Spectrometric determination of the chlorophyll-a concentration in water (H 60)


Subsector : S09 Registration Date : 2019-10-03Organization : NENCountry : Netherlands


ICS : 13.030.30, 13.060.45National Ref : NTA 8033:2019 Concept nlTitle : Non-target screening Scope : NTA 8033 describes the non-target screening with high resolution mass spectrometry for the

research of organic micropollutant in water.



Subsector S17: RESPIRATORY PROTECTIVE DEVICES

Subsector : S17 Registration Date : 2019-10-10Organization : BSICountry : United Kingdom


ICS :National Ref : BS 8468-5Title : Respiratoryprotectivedevicesforuseagainstchemical,biological,

radiological and nuclear (CBRN) agents. Part 5: Combined and multi-functional apparatus.Speci?cation



Subsector S26: ENVIRONMENTAL MANAGEMENT

Subsector : S26 Registration Date : 2019-10-10Organization : BSICountry : United Kingdom


ICS :National Ref : BS 8632Title : Natural Capital Accounting for Organizations. Specification



Subsector S99: UNDETERMINED

Subsector : S99 Registration Date : 2019-10-25Organization : AFNORCountry : France


ICS :National Ref : PR NF S99-802Title : Ethics in osteopathy


Subsector : S99 Registration Date : 2019-10-18Organization : DINCountry : Germany


ICS :National Ref : 05300461Title : Emergency car for emergency physcians - Definitions, requirements, test




ICS : 65.080National Ref : NEN 7433:2019 Concept nlTitle : Manure and derivatives - Sample pre-treatment for the determination of nitrogen,

phosphorus, and potassium - Destruction with sulphuric acid, hydrogen peroxyde and copper sulphate

Scope : This standard describes a method for the digestion of manure with sulphuric acid/hydrogen peroxide/copper sulphate. This digestion method is applicable to all sorts of manure, except manure containing nitrogen in the form of nitrate.




ICS : 03.120, 13.160National Ref : NTA 8290:2019 Concept nlTitle : Technology enabled care at home - Part 1: Generic framework Scope : NTA 8290 describes the application of digital information and communication technologie

for the improvement of health care at home. Organizations with a legal personality are responsible for the application and arrangement of the digital environment. The purpose of this publication is to facilitate health care institutions, health care purchasers, suppliers and their patients to make the best choices in relation to technology enabled care at home.

Relatedness :

National : New


** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES

Subsector : T01 Registration Date : 2019-10-10Organization : BSICountry : United Kingdom


ICS :National Ref : BS 6349-1-3Title : Maritime works. Part 1-3: Code of practice for geotechnical design


Subsector : T01 Registration Date : 2019-10-18Organization : DINCountry : Germany


ICS :National Ref : 13203077Title : Ships and marine technology - Design, manufacture and testing of pipeline systems for

gaseous marine fuels - Piepeline systems for liquefied or compressed natural gas



Subsector T02: AEROSPACE



ICS :National Ref : 13116368Title : Aerospace series - Pan head bolts, close tolerance, with internal offset cruciform ribbed

drive recess and short-length MJ thread, titanium alloy, nominal tensile strength 1 100 MPa, for temperatures up to 315 °C; Text in German and English




ICS :National Ref : 13116369Title : Aerospace series - Hexagon bolts, close tolerance, with short-length MJ thread, shoulder,

titanium alloy, nominal tensile strength 1 100 MPa, for temperatures up to 315 °C; Text in German and English




ICS :National Ref : 13116370Title : Aerospace series - Sleeves, wall thickness 0,5 mm, for fasteners with protruding head;

Text in German and English




ICS :National Ref : 13116371Title : Aerospace series - Sleeves, wall thickness 0,25 mm, for fasteners with countersunk

head; Text in German and English




ICS :National Ref : 13116373Title : Aerospace series - Unmanned aircraft systems (UAS) - Part 1: Terms and definitions;

Text in German and English



Subsector T06: METAL AND PLASTIC CONTAINERS

Subsector : T06 Registration Date : 2019-10-14Organization : UNECountry : Spain Latest Date for Comments : 2019-10-29


ICS :National Ref : PNE 53928

Title : Plastics. Reusable polypropylene (PP) cups for food use. Definition and test methodScope : This standard specifies the characteristics of polypropylene cups (PP), manufactured by

thermoforming process. It also specifies the test method to verify that it can be used up to 5 times, after two separate washing processes in the dishwasher.



Subsector T09: MATERIALS HANDLING AND STORAGE EQUIPMENT

Subsector : T09 Registration Date : 2019-10-23Organization : ASICountry : Austria


ICS : 55.180.01National Ref : ÖNORM V 5750Title : Cargo securement - MethodsScope : This Austrian Standard (ÖNORM) specifies methods for securing loads on transport vehicles

in road, rail and ship traffic against the forces occurring during transport. It should provide those responsible for loading and transport with basic information and recommendations for the safe connection between cargo and means of transport. However, this ÖNORM can also be applied analogously, for example, to the formation of loading units (stowing in containers, securing pallet loads).


Subsector : T09 Registration Date : 2019-10-25Organization : AFNORCountry : France


ICS :National Ref : PR NF H95-420Title : Materials handling and lifting in the agri-foodstuffs industries - Adjustable and non-

adjustable platforms - Built-in safety


Subsector : T09 Registration Date : 2019-10-25Organization : AFNORCountry : France


ICS :National Ref : PR XP H96-205Title : Installation guidelines for use, collection and maintenance of recycling points



Subsector T14: PACKAGING



ICS :National Ref : 11501247Title : Packaging test - Method of test for determining the pattern repeat of flexible packaging

materials



Subsector T16: LIFTS & ESCALATORS

Subsector : T16 Registration Date : 2019-10-14Organization : UNECountry : Spain Latest Date for Comments : 2019-11-18


ICS :National Ref : PNE 58720Title : Preventive maintenance of lifting appliancesScope : This standard deals with the preventive maintenance checks to be carried out during

periodicchecksbyalegallyenabledliftconservatorcompany.Thisstandarddoesnotdealwithcorrectivemaintenanceactionsormajormodifications.



Subsector T19: ROAD SAFETY

Subsector : T19 Registration Date : 2019-10-29Organization : BDS Draft Issue Date : 2019-10-15Country : Bulgaria Latest Date for Comments : 2019-11-15

Project ID : BG068007/0001 Draft for public enquiry

ICS : 01.080.10, 93.080.30National Ref : prBDS 1517Title : Road traffic signs - Dimensions and lettersScope : This standard defines the dimensions of road signs and other means of signaling roads open

to the public in and outside settlements, as well as the font used for letters and numbers for their inscriptions.

Relatedness :National : REV/AMD BDS 1517:2006


Subsector T20: TRAM- AND RAILWAY ENGINEERING

Subsector : T20 Registration Date : 2019-10-08Organization : UNMZCountry : Czech Republic


ICS :National Ref :Title : Technical and safety tests of track vehicles operated on main lines, regional lines and

railway sidingsScope : This standard determines the scope, method and conditions for carrying out of technical and

safety tests of vehicles operated on main lines, regional lines and industrial sidings. It is related to all powered vehicles, special vehicles and driving cars. It is further related to towed vehicles with maximum speed 160 km/h and more.



** End of Sector **




Sector Z : INFORMATION TECHNOLOGY


Subsector Z99: UNDETERMINED

Subsector : Z99 Registration Date : 2019-10-03Organization : NENCountry : Netherlands


ICS : 13.020.20National Ref : NPR 8284:2019 Concept enTitle : Open urban platform Scope : NPR 8284 is applicable to digitization in an urban environment. For the digitization of the

public space, an OUP is needed.



** End of Sector **

2011-06

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180; 373

A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4

A12 Consultancy Services / 395; 381

A13 Expertise Services / 405

A14 Aesthetic Services / 403;409

A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C22 Bio-Based products / 411

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367; 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027

F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383; CEN/WS 019

N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238; 408

N22 Feather and related materials / 222

N23 Diamond / 410

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC/JWG AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/TC 406; CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS ;377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC

October 2019

Issued on : 4 November 2019

Information Procedure on Standards

Notifications registered at CCMC during October 2019

Sector U : GENERAL ELECTROTECHNICAL STANDARDS

Register issued on : 4 November 2019

Subsector U11: ENVIRONMENTAL TESTING OF ELECTROTECHNICAL EQUIPMENT

Subsector : U11 Registration Date : 2019-10-18Organization : DINCountry : Germany


ICS :National Ref : 06235729Title : Testing of carbonaceous materials - Determination of compressive strength - Solid

materials




ICS :National Ref : 06235729Title : Testing of carbonaceous materials - Determination of compressive strength - Solid

materials




ICS :National Ref : 06235730Title : Testing of carbonaceous materials - Determination of flexural strength by three point

method - Solid materials




ICS :National Ref : 06235730Title : Testing of carbonaceous materials - Determination of flexural strength by three point





ICS :National Ref : 06235732Title : Testing of carbonaceous materials - Determination of flexural strength by four point





ICS :National Ref : 06235732Title : Testing of carbonaceous materials - Determination of flexural strength by four point




Subsector U99: UNDETERMINED



ICS :National Ref : 02229085Title : Electric signalling systems for railways - Part 103: Identification of safety requirements for

technical functions in railway signalling




ICS :National Ref : 02229085Title : Electric signalling systems for railways - Part 103: Identification of safety requirements for

technical functions in railway signalling



** End of Sector **



Sector W : ELECTRICAL ENGINEERING


Subsector W08: ELECTRIC CABLES

Subsector : W08 Registration Date : 2019-10-10Organization : BSICountry : United Kingdom


ICS :National Ref : BS 7671:2018 AMD 2Title : RequirementsforElectricalInstallations.IETWiringRegulations.

Amendment



Subsector W11: ELECTRICAL ACCESSORIES

Subsector : W11 Registration Date : 2019-10-15Organization : PKNCountry : Poland


ICS : 29.120.30National Ref : prPN-E-93201Title : Plugs and socket-outlets for household and similar purposes -- Plugs and socket-outlets

for rated voltage of 250 V for rated currents not exceeding 16 A -- DimensionsScope : This standard specified the dimensions of the parts of the socket-outlets and plugs. This

standard applies to plugs with rated currents of 2,5 A, 6 A, 10 A and 16 A and fixed and portable two pole socket-outlets with a rated current up to 16 A, with or without a earthing contact, for rated voltage 250 V AC, for household and similar purposes. This standard applies to rewirable and non-rewirable plugs for equipment class I and non-rewirable plugs for equipment class II. General requirements are covered in PN-IEC 60884-1:2006



** End of Sector **



Sector Z : CCMC/CEN/CLC


Subsector Z99: UNDETERMINED












** End of Sector **

List of Subsectors covering work items in CENELEC’s field of activity

(version 2009-05-15)

(Rows or committees shaded in blue indicate changes compared to the last list of subsectors )

U GENERAL ELECTROTECHNICAL STANDARDS

Title IEC TC CLC TC

U01 INFORMATION STRUCTURES, DOCUMENTATION AND GRAPHICAL SYMBOLS

IEC TC 3 IEC SC 3C IEC SC 3D

U02 ALUMINIUM CONDUCTORS. IEC TC 7

U03 SYSTEM ASPECTS FOR ELECTRICAL ENERGY SUPPLY IEC TC 8 CLC TC 8X

U04 ELECTRICAL FLUIDS. IEC TC 10 BTTF 116-1

U05 ELECTRICAL INSULATING MATERIALS AND SYSTEMS. IEC TC 15 IEC TC112

U06 MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION MARKINGS.

IEC TC 16

U07 LETTER SYMBOLS FOR ELECTROTECHNOLOGY. IEC TC 25

U08 ELECTRIC WELDING. IEC TC 26 CLC TC 26A CLC TC 26B

U09 INSULATION CO-ORDINATION. IEC TC 28 IEC TC 109

U10 HIGH-VOLTAGE TESTING. IEC TC 42

U11 ENVIRONMENTAL TESTING OF ELECTROTECHNICAL EQUIPMENT

IEC TC 89 IEC TC 104

U12 RELIABILITY. IEC TC 56

U15 MAGNETIC ALLOYS. IEC TC 68

U16 PROTECTION BY ENCLOSURES. IEC TC 70

U17 SHORT CIRCUIT CURRENTS. IEC TC 73

U18 ENVIRONMENTAL STANDARDIZATION - GENERAL IEC TC 111 CLC TC 111X

U19 RADIO INTERFERENCE, EMC IEC TC 77 + SCs CISPR + SCs

CLC TC 210

U20 SUPERCONDUCTIVITY IEC TC 90

U21 NANOTECHNOLOGY IEC TC 113

U91 QUALITY ASSURANCE ISO TC 176 BTTF 76-3

U92 ADVANCED CERAMICS IEC TC *

U93 ELECTROMAGNETIC HAZARDS IEC TC 106 CLC TC 106X

U94 PUBLIC PROCUREMENT MATTERS CLC TC 218

U95 ENVIRONMENTAL MATTERS BTWG 132-3

U96 USABILITY & SAFETY OF ELECTRICAL PRODUCTS WITH REFERENCE TO PEOPLE WITH SPECIAL NEEDS

BTWG 101-5

U99 UNDETERMINED. (ex: terminology) IEC TC 1

V ELECTRONIC ENGINEERING

Title IEC TC CLC TC

V01 RADIOCOMMUNICATIONS AND CABLE NETWORKS IEC TC 103 CLC TC 209

V02 ELECTRICAL MEASURING EQUIPMENT. IEC TC 13 CLC TC 13 BTWG 105-2

V03 ELECTROACOUSTICS AND ULTRASONICS. IEC TC 29 IEC TC 87

V04 INSTRUMENT TRANSFORMERS. IEC TC 38 CLC TC 38X

V05 ELECTRONIC TUBES. IEC TC 39

V06 CAPACITORS AND RESISTORS. IEC TC 40 CLC TC 40XA CLC TC 40XB

V07 NUCLEAR INSTRUMENTATION. IEC TC 45 IEC SC 45A IEC SC 45B

CLC TC 45AX CLC TC45B

V08 CABLES AND WIRES FOR TELECOMMUNICATIONS IEC TC 46 + SCs CLC TC 46X + SCs

V09 SEMICONDUCTORS. IEC TC 47 + SCs IEC TC 110

V10 ELECTROMECHANICAL COMPONENTS. IEC TC 48 + SCs IEC TC 91

BTWG 117-1

V11 PIEZOELECTRIC DEVICES. IEC TC 49

V12 MAGNETIC COMPONENTS. IEC TC 51

V13 PRINTED CIRCUITS.

V15 ELECTROMEDICAL EQUIPMENT. IEC TC 62 + SCs CLC TC 62

V16 PROCESS CONTROL. IEC TC 65 + SCs CLC TC 65CX BTWG 109-2

V17 ELECTRONIC MEASURING EQUIPMENT. IEC TC 66 IEC TC 85

BTTF126-1

V18 AUTOMATIC CONTROLS. IEC TC 72 CLC TC 72

V19 SAFETY OF DATA PROCESSING EQUIPMENT. Merged into V24

V20 RADIATION SAFETY AND LASER EQUIPMENT. IEC TC 76 CLC TC 76

V21 ALARM SYSTEMS. IEC TC 79 CLC TC 79

V22 NAVIGATIONAL INSTRUMENTS. IEC TC 80

V23 PHOTOVOLTAIC SYSTEMS. IEC TC 82 CLC TC 82

V24 INFORMATION TECHNOLOGY EQUIPMENT AND AUDIO, VIDEO AND AUDIO-VISUAL EQUIPMENT AND SYSTEMS

IEC TC 100 + TAs

IEC TC 108

JTC1/25 & 26

CLC TC 108X CLC TC 205 + SC CLC TC 206 CLC TC 215 CLC/JTC 1

V27 AUDIO, VIDEO AND AUDIO-VISUAL EQUIPMENT AND SYSTEMS

Merged with V24

V28 FIBRE OPTICS. IEC TC 86 + SCs

CLC TC 86A CLC TC 86BXA

V30 DESIGN AUTOMATION IEC TC 93

V31 SURFACE TRANSPORT ELECTROTECHNICAL SYSTEMS

BTTF 69-3

V32 AVIONICS IEC TC 107 CLC TC 107X

W ELECTRICAL ENGINEERING

Title IEC TC CLC TC

W01 ELECTRIC ROTATING MACHINES. IEC TC 2 CLC TC 2

W02 TURBINES: Hydraulic, steam, wind and marine energy IEC TC 4 IEC TC 5 IEC TC 88 IEC TC 114

CLC TC 88

W03 ELECTRIC TRACTION EQUIPMENT. IEC TC 9 CLC TC 9X + SCs

W04 OVERHEAD ELECTRIC LINES. IEC TC 11 CLC TC 11 BTTF 129-1 BTTF 132-1

W05 POWER TRANSFORMERS. IEC TC 14 CLC TC 14

W06 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR. IEC TC 17 IEC SC 17A IEC SC 17C

CLC TC 17AC

W07 ELECTRICAL INSTALLATIONS IN SHIPS. IEC TC 18 IEC SC 18A

W08 ELECTRIC CABLES. IEC TC 20 CLC TC 20

W09 SECONDARY BATTERIES. IEC TC 21 IEC SC 21A

CLC TC 21X

W10 POWER ELECTRONICS. IEC TC 22 + SCs CLC TC 22X

W11 ELECTRICAL ACCESSORIES. IEC TC 23 + SCs CLC TC 23BX CLC TC 23E CLC TC 213 BTWG 112-1 BTTF 129-2

W12 ELECTROHEAT. IEC TC 27

W13 EQUIPMENT FOR EXPLOSIVE ATMOSPHERES. IEC TC 31 + SCs

IEC TC 101 CLC TC 31 + SCs

CLC TC 216

W14 FUSES. IEC TC 32 IEC SC 32A

W15 POWER CAPACITORS. IEC TC 33

W16 LAMP AND LUMINAIRES. IEC TC 34 + SCs

CLC TC 34Z

W17 PRIMARY BATTERIES. IEC TC 35

W18 INSULATORS. IEC TC 36 + SCs

CLC TC 36A

W19 SURGE ARRESTERS. IEC TC 37 + SCs

CLC TC 37A

W20 ELECTRICAL RELAYS. IEC TC 94 IEC TC 95

(CLC TC 94)1

W22 ELECTRICAL EQUIPMENT OF MACHINE TOOLS. IEC TC 44 CLC TC 44X

W23 WINDING WIRES. IEC TC 55 CLC TC 55

W24 TELECONTROL SYSTEMS. IEC TC 57

W25 DOMESTIC APPLIANCE PERFORMANCE. IEC TC 59 + SCs CLC TC 59X

W26 DOMESTIC ELECTRICAL APPLIANCES AND MOTOR-OPERATED ELECTRIC TOOLS

IEC TC 61 + SCs

TC 116 CLC TC 61 CLC TC 116 BTTF 128-1

W27 ELECTRICAL INSTALLATIONS IN BUILDINGS. IEC TC 64 CLC TC 64 BTTF 62-3

W28 ELECTRIC VEHICLES. IEC TC 69

W29 ELECTRICAL INSTALLATIONS FOR OUTDOOR SITES

W30 LIVE WORKING. IEC TC 78 CLC TC 78

W31 LIGHTNING PROTECTION. IEC TC 81 CLC TC 81X

W32 LOW-VOLTAGE POWER TRANSFORMERS. IEC TC 96

W33 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR. IEC TC 17 IEC SC 17B IEC SC 17D

CLC TC 17B (CLC TC 17D)

1

W34 LOW-VOLTAGE FUSES. IEC SC 32B IEC SC 32C

W35 SYSTEM ENGINEERING AND ERECTION OF ELECTRICAL POWER INSTALLATIONS

IEC TC 99 CLC TC 99X

W36 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES

IEC TC 97 CLC TC 97

W37 FUEL CELL TECHNOLOGIES IEC TC 105

W38 SAFETY OF ELECTROSTATIC PAINTING AND FINISHING EQUIPMENT

CLC TC 204

W39 HIGH VOLTAGE DIRECT CURRENT (HVDC) TRANSMISSION TECHNOLOGY

IEC TC 115

Z IT MATTERS NOT COVERED BY OTHER SUBSECTORS

Z01 CENELEC/ETSI EMC conducted transmission networks JWG EMC

Z02 WORK IN THE FIELD OF ISO/IEC JTC 1 AND SUB-COMMITTEES JTC 1, except WG 25 & 26

1 Dormant

List of symbols typically used by National Committees for their national standards references

CLC REF

EN 55020:2002 EN 55020:2002/A1:2003 Draft Standards

AT ÖVE/ÖNORM EN 55020+A1+A2 ÖVE/ÖNORM EN 55020+A1+A2 E or ENTWURF

BE NBN EN 55020/1:2003 NBN EN 55020/1:2003 PR NBN

CH SN EN 55020:2002 SN EN 55020:2002/A1:2002

CY CYS EN 55020:2002 CYS EN 55020:2002-iss1

CZ CSN EN 55020 ED. 2 CSN EN 55020 ED. 2/A1

DE DIN EN 55020 (VDE 0872-20) DIN EN 55020 (VDE 0872-20) Reference of the future standard or work item number, ex: 02218905

DK DS/EN 55020:2005 DS/EN 55020/A1:2005 Reference of the future standard

EE EVS-EN 55020:2002 EVS-EN 55020:2003/A1:2003 Reference of the future standard

ES UNE-EN 55020:2004 UNE-EN 55020-A1:2004 PNE

FI SFS-EN 55020:2002 SFS-EN 55020:2000/A1:2003 Reference of the future standard

FR NF EN 55020 NF EN 55020/A1 PR NF

GB BS EN 55020:2002 BS EN 55020:2002+A1:2003 Reference of the future standard

GR ELOT EN 55020:2002 ELOT EN 55020/A1:2003 Reference of the future standard

HU MSZ EN 55020:2004 MSZ EN 55020:2004 PR I.S. or Reference of the future standard

IE I.S. EN 55020:2005 I.S. EN 55020/A1:2005

IS IST EN 55020:2002 IST EN 55020:2002/A1:2003

IT CEI EN 55020:2003 CEI EN 55020/A1:2003 Reference of the future standard

LT LST EN 55020+A1:2003 LST EN 55020+A1:2003

LU** EN 55020:2002 EN 55020:2002/A1:2003

LV LVS EN 55020:2002 LVS EN 55020:2002 /A1:2003

MT MSA EN 55020:2002 MSA EN 55020:2002/A1:2003

NL NEN-EN 55020:2002/C12:2005 NEN-EN 55020:2002/A1:2003/C11:2005 ONTWERP NEN

NO NEK EN 55020:2002 NEK EN 55020:2002/A1:2003

PL PN-EN 55020:2003 PN-EN 55020:2003/A1:2003

PT NP EN 55020:2002 NP EN 55020:2002/A1:2003 PR NP

RO SR EN 55020:2003 SR EN 55020:2003/A1:2004

SE SS-EN 55020 SS-EN 55020/A1:2003 Reference of the future standard

SI SIST EN 55020:2003 SIST EN 55020:2003/A1:2003

SK STN EN 55020:2002 STN EN 55020/A1:2003

** Luxembourg applies the CENELEC reference number without a national prefix

ΠΡΟΣ: Όλα τα Μέλη Σας επισυνάπτotitle : price changes due to inflation:...

Documents