How to perform a

DEGREE EVALUATIONDEGREE EVALUATION

Go to uwyo.edu

Select WyoWeb

Log in to WyoWeb

Select the Student Resources tab

Select Degree Evaluation under Registration Tools

Select the semester you are currently enrolled in

Select Detail Requirements

Select Submit

View your remaining requirements

For more instructions including photos, continue to the next slide.

If you are viewing Destination YOU-W, shown below, please click this arrow to continue.

Otherwise, continue to the next slide.

College Requirements

Department Requirements

University Requirements

First section of degree evaluation

Second section of degree evaluation

Third section of degree evaluation

Program Enrolled in. **Double check that your

degree evaluation lists the major you have declared.**

Area: Designates a requirement.

Met: Indicates

whether or not the

requirement has been met.

Specific actions to take to complete the general

requirement.

Indicates that both actions must be taken to complete the requirement. You may see an “or” option for other

requirements.

General USP RequirementTo meet this requirement you must fulfill the QA and QB requirement.

Specific Math and Quant USP Requirements of

QA and QB

MetConditio

n

Subjects needed to complete

the requiremen

t

Specific Course

numbers needed to

complete the requirement

If the requirement has been met, you will see the word YES under the MET heading and next to the

course/requirement. You will then see the course that met the requirement on the right side of

your evaluation.

If the requirement hasn’t been met, you will see the

word NO under the MET heading and next to the

course/requirement. You will then see the course needed

to fulfill the requirement listed on the left side of your

evaluation.

Some majors will have a GPA requirement. When the degree evaluation

calculates your GPA, it will most often include your transfer GPA. The GPA

needed for graduation or to meet specific requirement is a UW only GPA and

cannot include your Transfer GPA. Please calculate your GPA based only on

courses you took through the University of Wyoming.

UW GPA: Calculate using only courses taken through the

University of Wyoming.

If you transfer in 16 credit hours, post high school, you may take the TIP exam, score a 70%, and then petition to have this USP requirement met.

For information about the TIP exam visit: www.uwyo.edu/unst/student-advising-information/transfer-information/satisfying-

the-l/

If you transfer in 16 credit hours, post high school, this requirement will be met.

Information on the Intellectual Community (I) USP can be found at: www.uwyo.edu/unst/usp-2003/i-requirement/index.html

One course may satisfy more than one requirement.o Ie: ME 3360 is an upper division course that will fulfill a major requirement

for the Mechanical Engineering Major, as well as, count for credit hours to be applied towards the requirement of 48.0 upper division credit hours.

When you have the option to complete an Upper or Lower division course, try to take the upper division course to fulfill the requirement of 48.0 upper division credit hours.

A UW GPA of 2.0 is required for graduation. Take note, the college you are obtaining your degree through may have a different GPA requirement.

Double check to make sure all classes you have taken at both your previous institution and the University of Wyoming are listed on your Degree Evaluation.

What if you want to consider a change of major?

What-If Analysis helps you explore alternate majors using a degree evaluation to view the requirements remaining to complete a degree in the new major.

What-If Analysis also helps you to view how the courses you have already completed may meet the requirements of a different major.

While viewing the degree evaluation for your current major, scroll to the bottom of the page and select the What-If Analysis Hyperlink.

Select the year you transferred to or began taking courses at the

University of Wyoming. Then, select continue.

Locate the program you are considering. Then,

select continue.

Select Submit.

Select the campus you will be attending.

Select the major you are

considering.

Select the term when your new

program/major would begin.

Select Generate Request.

Select Detail Requirements, then Submit.

A new degree evaluation will be generated, which will include the requirements to be met in order to obtain a degree in your change of major.

Before changing your major, contact your advisor or the Center for Advising and Career Services to discuss the options for changing a major.

Center for Advising and Career ServicesKnight Hall, Room 222

Phone:  (307) 766-2398www.uwyo.edu/cacs/

Contact your Program Advisor

Office of the RegistrarKnight Hall, West WingDepartment 3964

(307)766-5272Email: registrar@uwyo.edu

Transfer Support ServicesKnight Hall, Room 202

(307) 766-2398Email: transfer@uwyo.edu

After logging in, select Register for Classes from the

checklist.

Select Return to Menu on the Registration Term page

Select Return to Menu on the Registration page

Select Student Records.

Select Degree Evaluation under Registration Tools

Select Detail Requirements

Select Submit

View your remaining requirements

For more instructions including photos, continue to the next slide.

College Requirements

Department Requirements

University Requirements

First section of degree evaluation

Second section of degree evaluation

Third section of degree evaluation

Program Enrolled in. **Double check that your

degree evaluation lists the major you have declared.**

Area: Designates a requirement.

Met: Indicates

whether or not the

requirement has been met.

Specific actions to take to complete the general

requirement.

Indicates that both actions must be taken to complete the requirement. You may see an “or” option for other

requirements.

General USP RequirementTo meet this requirement you must fulfill the QA and QB requirement.

Specific Math and Quant USP Requirements of

QA and QB

MetConditio

n

Subjects needed to complete

the requiremen

t

Specific Course

numbers needed to

complete the requirement

If the requirement has been met, you will see the word YES under the MET heading and next to the

course/requirement. You will then see the course that met the requirement on the right side of

your evaluation.

If the requirement hasn’t been met, you will see the

word NO under the MET heading and next to the

course/requirement. You will then see the course needed

to fulfill the requirement listed on the left side of your

evaluation.

Some majors will have a GPA requirement. When the degree evaluation

calculates your GPA, it will most often include your transfer GPA. The GPA

needed for graduation or to meet specific requirement is a UW only GPA and

cannot include your Transfer GPA. Please calculate your GPA based only on

courses you took through the University of Wyoming.

UW GPA: Calculate using only courses taken through the

University of Wyoming.

If you transfer in 16 credit hours, post high school, you may take the TIP exam, score a 70%, and then petition to have this USP requirement met.

For information about the TIP exam visit: www.uwyo.edu/unst/student-advising-information/transfer-information/satisfying-

the-l/

If you transfer in 16 credit hours, post high school, this requirement will be met.

Information on the Intellectual Community (I) USP can be found at: www.uwyo.edu/unst/usp-2003/i-requirement/index.html

One course may satisfy more than one requirement.o Ie: ME 3360 is an upper division course that will fulfill a major requirement

for the Mechanical Engineering Major, as well as, count for credit hours to be applied towards the requirement of 48.0 upper division credit hours.

When you have the option to complete an Upper or Lower division course, try to take the upper division course to fulfill the requirement of 48.0 upper division credit hours.

A UW GPA of 2.0 is required for graduation. Take note, the college you are obtaining your degree through may have a different GPA requirement.

Double check to make sure all classes you have taken at both your previous institution and the University of Wyoming are listed on your Degree Evaluation.

What if you want to consider a change of major?

What-If Analysis helps you explore alternate majors using a degree evaluation to view the requirements remaining to complete a degree in the new major.

What-If Analysis also helps you to view how the courses you have already completed may meet the requirements of a different major.

While viewing the degree evaluation for your current major, scroll to the bottom of the page and select the What-If Analysis Hyperlink.

Select the year you transferred to or began taking courses at the

University of Wyoming. Then, select continue.

Locate the program you are considering. Then,

select continue.

Select Submit.

Select the campus you will be attending.

Select the major you are

considering.

Select the term when your new

program/major would begin.

Select Generate Request.

Select Detail Requirements, then Submit.

A new degree evaluation will be generated, which will include the requirements to be met in order to obtain a degree in your change of major.

Before changing your major, contact your advisor or the Center for Advising and Career Services to discuss the options for changing a major.

Center for Advising and Career ServicesKnight Hall, Room 222

Phone:  (307) 766-2398www.uwyo.edu/cacs/

Contact your Program Advisor

Office of the RegistrarKnight Hall, West WingDepartment 3964

(307)766-5272Email: registrar@uwyo.edu

Transfer Support ServicesKnight Hall, Room 202

(307) 766-2398Email: transfer@uwyo.edu