email: sales ......visit or call us on (44) 0113 255 8887 to arrange a free demo 3 introduction the...

1www.tigbrusheurope.com // Email: [email protected]

2 To order call: +(44) 0113 255 8887 // Fax: +(44) 0113 220 9858

1Visit www.tigbrusheurope.com or call us on +(44) 0113 255 8887 to arrange a free demo

MAKING EVERYWELD CLEANER

2 Exclusive TIG Brush® // Stainless Steel Weld Cleaning System

Engineering Utilities specialises in supplying equipment and consumables for metal preparation, finishing and cleaning to a diverse range of market sectors throughout the UK, Ireland and overseas.

As a family run business with more than 30 years of growth and success, we have a long established reputation for efficiency, integrity

WELCOMEand reliability. We maintain this by meeting our customers’ needs with an innovative approach, outstanding service, expert advice and quality products at competitive prices.

Whatever your requirements are, we look forward to working with you to provide precisely the right solutions.


INTRODUCTION

The TIG Brush® concept 6 - 7

Why the TIG Brush® 8

The TIG Brush® effect 9

Change the way we do business 10 - 11

NEW INNOVATIONS FOR 2016

TIG Brush® TBE-550 12

TIG Brush® TB-95 13

TIG Brush® Propel Torch 14

NSF registered fluid 15

THE PRODUCT RANGE

TIG Brush® sets 18 - 23

TIG Brush® fluids 24 - 28

TIG Brush® spares & accessories 29 - 39

TIG Brush® etch marking system 40 - 43

WHAT DO OUR CUSTOMERS SAY

TIG Brush® testimonials 44 - 45

CONTENTS


THETIG Brush®

CONCEPT


When stainless steel is welded, the intense heat generated causes chromium depletion, so an iron rich zone is left around the weld. The high concentration of surface iron, together with the high welding temperatures, causes the iron to immediately oxidize. This results in the characteristic blue and a brown discolouration around the weld.

WHAT HAPPENS WHEN

STAINLESS STEEL IS WELDED?

The discoloured area corrodes easily, as chromium isn’t present in high enough concentrations to protect the metal.

The TIG Brush® has been designed to rapidly remove the discoloured oxides and passivate the underlying surface, without altering the look and finish of the metal.


WHY TIG Brush®?

The TIG Brush® comprises of a brush through which an electric current is passed. The brush is dipped into a cleaning fluid and then applied to the areas to be cleaned. The fluid is designed to remove the iron oxide marks which result from welding.

The brush is designed to convert the electric current to high temperatures, especially at the end of the bristles. While the fluid is not harmful at room temperatures, the brush heats the fluid to an elevated temperature, when it becomes much more reactive. This results in an accelerated chemical action at the surface of the Stainless Steel.

Unlike Pickling Paste, the active ingredients of the cleaning fluid are not inherently dangerous to operator health, and if used correctly the fluid is non-toxic to the environment.

THE TIG Brush®

The original & best...gets better


THE CHEMICAL ACTION

ACTION

The blue and brown marks which result from welding are ferrous and ferric oxides of ions. Iron oxide layers are quite weak, and the temperature at which the TIG Brush® operates quickly breaks down the iron oxides.

The resulting ferric ions enter into solution in the fluid, where they are sequestered (held so they cannot form oxides again). When the TIG Brush® is removed from the work and the fluid wiped away, the surface of the stainless steel is left free from ferric ions and oxides.

PASSIVATION

Iron oxides are not very good at protecting the metal surface from contamination, and for this reason any discoloured areas start to corrode soon after welding, even after they have been cleaned. To stop this corrosion the metal surface needs to be “passivated”.

When the TIG Brush® removes the iron oxide layer, chromium rich metal underneath is exposed. The high temperature of the TIG Brush® causes the chromium to rapidly oxidize, forming a chromium oxide layer in the place of the Iron oxide layer. The process of forming the chromium oxide layer is called “passivation”.

THE TIG Brush®

EFFECT


Two traditional methods for cleaning stainless steel are Pickling Paste and mechanical abrasion. Both methods suffer from problems when used to clean stainless steel.

Pickling Paste comprises two very strong acids, which eat away the surface of the stainless steel.This process is called “etching”, which damages the surface of the stainless steel. Although Pickling Paste removes iron oxide discolouration, the metal surface is left without an oxide layer, which can allow contaminants to cause corrosion to take place. Therefore a separate “passivation” operation has to be performed. Due to the type of acids used, Picking Paste poses a very serious health risk to the operator, and is dangerous to the environment.

Mechanical abrasion, by definition, wears or scrapes away the surface of the stainless steel by linishing or other mechanical methods. The process does remove iron oxide layers, but also changes or damages the metal finish. Once again this method does not passivate the metal, so further processes are needed in order to protect the surface of the stainless steel. Abrasives and wire brushes also harbour contaminants which spread damage further.

Conventional electrolytic pad and sock machines – great idea and still widely used. However, due to the relatively low heat generated, the passive layer does not get restored as you clean and the main fundamental issue with them is the pads and socks wear away very quickly and it is very easy to catch the electrode on the workpiece, causing a black weld spot which is very difficult to remove.

TIG Brush® CHANGES THE WAY

WE DO BUSINESS


CONVENTIONAL METHODSPICKLING PASTE

Poor accessibilityDoesn’t restore the passive layerRapid pad wear = downtime/slowEasy to arc-out on the stainlessIneffective at electro-polishingExpensive to run

Damage the passive layer furtherSpreads oxides and drives them into the surfaceScratches/damages the aesthetic surface finishAirborne dust and wire dangerUneconomical – hard to focus on just what needs cleaning

Extremely toxicHazardous to user & environmentSlow 3 part processCannot be used on hot stainlessDamages the passive layer furtherPoor resultsRecurring ‘tea staining’Expensive PPE requiredNeed qualified trained operativesNot suitable for the food/drink/water industriesStorage & transport issues

ABRASIVES & BRUSHES

ELECTROLYTIC PAD & SOCK MACHINES

TIG Brush®

SAVES TIME

The TIG Brush® is a safe and effective way to clean the surface of stainless steel, particularly after welding. It has been designed to quickly remove blue and brown iron oxide marks without altering the surface finish of the metal. TIG Brush® also passivates the metal in the same operation, producing a complete result very quickly. The fluid used with the TIG Brush® is activated at high temperatures, and is therefore relatively safe for the operator and the environment under normal conditions.


THE TIG Brush® REVOLUTION CONTINUES

THE TBE-550The TBE-550 is the latest TIG Brush® model from Ensitech, specifically developed for use with the new Propel Torch, and delivers unrivalled power performance.

NEW FOR2016


TIG Brush® TB-95Deep-light etch marking fluid

Adding a permanent etch to your work or infrastructure

gives a range of benefits including safety instruction,

security identification and aesthetic improvement with

logos etc. Stainless steel is an extremely hard material

that is difficult to engrave via traditional methods. The

TIG Brush etching function enables fast, easy and

permanent dark and light marking on stainless steel,

very economically.

NEW FOR 2016


To retain its leading position, Ensitech understood the

necessity to think outside the box. User focus has now

shifted from the power supply to the application process;

the user requiring a solution that is fast, safe, ergonomic and

economical.

The patented design of the Propel Torch features two

significant technological breakthroughs in the weld cleaning

world; firstly the ‘T’ shaped handle allows the user’s wrist

to assume a more natural position during operation, which

reduces fatigue and increases productivity. Secondly, by

twisting the brush head, you can increase or reduce the

length of the brush’s bristles, depending on the cleaning

power required or simply to compensate for natural wear.

Once the brush is spent, you can wind the empty ferrule out

and wind a new brush in – SIMPLE, EASY & FAST!

WE ARE PLEASED TO INTRODUCE THE WORLD’S FIRST ADJUSTABLE WELD CLEANING PROPEL TORCH

NEW FOR 2016


®

ALL OF OUR FLUIDS ARE NSF APPROVEDEnsitech has invested heavily in market-leading research and

development to create a complete, premium range of innovative fluids

for every aspect of stainless steel surface preparation, weld cleaning

and finishing. In addition to this, Ensitech fluids are now NSF certified

and conform to the requirements of the NSF Non-Food Compounds

Registration Programme. The NSF mark is your assurance that Ensitech

pre, post and weld cleaning fluids have been tested and certified by

one of the most respected independent certification organisations in

existence today.

What is NSF Certification?

NSF certification ensures that the Ensitech fluid range adheres to stringent standards for public health protection and complies with the standards and procedures imposed by NSF. These standards and procedures include extensive product testing, material analysis, and plant inspections to evaluate every aspect of the product’s development and compliance to the standards before certification is issued. Moreover, NSF certification is an ongoing process. It requires regular retesting of products to ensure the high standards and compliance are maintained.

If you place a high priority on cleaning quality, speed, passivation and safety, use your TIG Brush with genuine Ensitech fluids. By following the recommended procedures of Ensitech’s Surface Finishing System® you can be confident of superior results and assured that Ensitech is committed to quality, compliance and safety.

Please use the following link to view the full list of Ensitech NSF registered fluids: http://info.nsf.org/usda/psnclistings.asp

(insert Ensitech into the company field then click on the search tab)

NEW FOR 2016

14 To order call: +(44) 0113 255 8887 // Fax: +(44) 0113 220 9858

PRODUCTS

TIG Brush® Sets 18 - 23

TIG Brush® Fluids 24 - 28

TIG Brush® Spares & Accessories 29 - 39

TIG Brush® Etch Marking System 40 - 43


NOT SURE ABOUT A PRODUCT OR CAN’T SEE WHAT YOU THINK YOU NEED?

Request a demonstration and see for yourself just how good TIG Brush® is! Get in touch at

E: [email protected]

T: 0113 255 8887

FOLLOW US AT // @E_utilities engineering-utilities

16 To order call: +(44) 0113 255 8887 // Fax: +(44) 0113 220 9858

PRODUCTS

TIG Brush® TBE-250Weld cleaning set - Essential

SET CONTAINS

1x TIG Brush® TBE-250 machine

1x TIG Brush® red lead with integral moulded handle 3m

1x TIG Brush® black earth lead 3m

1x TIG Brush® spare wand 100mm

3x TIG Brush® spare brush tip - copper ferrule

1x TIG Brush® - accessories container

1x TIG Brush® insulating shroud - standard

1x TIG Brush® insulating shroud - long

1x TIG Brush® neutraliser spray bottle

1x TIG Brush® wide necked fluid container

1x TIG Brush® TB-25 weld cleaning fluid 1L

1x TIG Brush® TB-40 neutraliser fluid 1L

1x Mains IEC lead 110V


1x TBE-250 USB inc, quick start guide, instruction manual,

training videos, MSDS

CODE DESCRIPTION

P06464 TIG Brush TBE-250 Weld cleaning set - Essential


PRODUCTS

TIG Brush® TBE-250Weld cleaning set - Advanced

SET CONTAINS








1x TIG Brush® dual brush adaptor

1x TIG Brush® dual brush shroud



1x TIG Brush® TB-01 weld pre cleaner 1L

1x TIG Brush® TB-50 cleaner & brightener fluid 1L





1x TIG Brush® microfibre cloth - pink

1x TIG Brush® microfibre cloth - blue

1x TIG Brush® - accessories container

1x TIG Brush® goggles

1x TIG Brush® glove pair

1x TIG Brush® Type B respirator series 6500

1x TIG Brush® Type B respirator filter set (2) 6057

1x TIG Brush® protective apron standard - blue

1x TIG Brush® case large - anthracite


training videos, MSDS CODE DESCRIPTION

P06766 TIG Brush TBE-250 weld cleaning set - Advanced

18 To order call: +(44) 0113 255 8887 // Fax: +(44) 0113 220 9858

TIG Brush® TBE-550Weld cleaning set - Essential SH

SET CONTAINS





1x TIG Brush® accessories container















1x TIG Brush® single brush insulating shroud - short

1x TIG Brush® spare wand - 100mm



CODE DESCRIPTION

P08828 TIG Brush TBE-550 weld cleaning set - Essential SH


TIG Brush® TBE-550Weld cleaning set - Essential PT

SET CONTAINS


1x TIG Brush® PROPEL Torch complete assembly with red lead


10x TIG Brush® PROPEL Torch spare brush tip
















1x TBE 550 USB inc, quick start guide, instruction manual,


CODE DESCRIPTION

P06891 TIG Brush TBE-550 weld cleaning set - Essential PT

20 To order call: +(44) 0113 255 8887 // Fax: +(44) 0113 220 9858

TIG Brush® TBE-550 Weld cleaning set - Advanced

SET CONTAINS


1x TIG Brush® PROPEL Torch complete assembly with red lead



10x TIG Brush® PROPEL Torch spare brush tip





















1x TIG Brush® case small - anthracite

1x TIG Brush® single brush insulating shroud - short

1x TIG Brush® spare wand - 100mm


training videos CODE DESCRIPTION

P08829 TIG Brush TBE-550 weld cleaning set - Advanced


TIG Brush® TBE-700 Weld cleaning set - Performance

SET CONTAINS



1x TIG Brush® black earth lead with stainless steel clamp 6m


20x TIG Brush® spare brush tip - stainless ferrule





1x TIG Brush® quad brush adaptor

1x TIG Brush® quad brush shroud















1x TIG Brush® protective apron standard - purple


2x TIG Brush® accessories container - blue/empty


training videos, MSDS CODE DESCRIPTION

P06680 TIG Brush TBE-700 weld cleaning set - Performance

22 To order call: +(44) 0113 255 8887 // Fax: +(44) 0113 220 9858

TIG Brush® TB-01Weld pre-cleaner

CODE DESCRIPTION

P06849 TIG Brush® TB-01 weld pre-cleaner (purple) - 1 litre

P06850 TIG Brush® TB-01 weld pre-cleaner (purple) - 5 litre

NSF registered pre-weld cleaning fluid developed to remove oil and grease residues from stainless steel surfaces prior to the welding process. If contaminants are not removed, it can result in unsightly and difficult to remove inclusions in the weld. Using TB-01 first ensures a perfect finish.

TIG Brush® TB-21NDWeld cleaning fluid

CODE DESCRIPTION

P06764 TIG Brush® TB-21ND weld cleaning fluid (orange) - 1 litre

P06765 TIG Brush® TB-21ND weld cleaning fluid (orange) - 5 litre

NSF registered TB-21ND light-duty high performance fluid, which cleans, polishes and passivates stainless steel without the corrosive classification given to TB-25. Its non-dangerous rating makes is slightly easier to handle and ship. For best results neutralise with TB-40 after cleaning.

FLUIDSAll fluids are NSF registered

Please visit www.tigbrusheurope.comfor information regarding MSDS

for all our fluids


TIG Brush® TB-30ND Weld cleaning fluid

CODE DESCRIPTION

P06447 TIG Brush® TB-30ND weld cleaning fluid (green) - 1 litre

P06448 TIG Brush® TB-30ND weld cleaning fluid (green) - 5 litre

NSF registered biodegradable stainless steel weld cleaning fluid

developed for use in environments where corrosive chemicals are

not permitted. TB-30ND is environmentally friendly and cleans as

effectively as TB-25 but does not electro polish. For best results

neutralise with TB-41 after cleaning.

TIG Brush® TB-31ND Neutral weld cleaning fluid

CODE DESCRIPTION

P04639 TIG Brush® TB-31ND weld cleaning fluid (peach) - 1 litre

P04644 TIG Brush® TB-31ND weld cleaning fluid (peach) - 5 litre

Where safety is paramount, this NSF registered, custom designed,

patented fluid is pH neutral. TB-31ND is fast acting on stainless

steel welds and requires no separate neutralisation process. It

cleans and passivates but does not electro polish and leaves no

surface residue. This unique fluid is the safest fluid on the market

for use, handling, storage and transport.

TIG Brush® TB-25 Weld cleaning & Polishing fluid

CODE DESCRIPTION

P06449 TIG Brush® TB-25 weld cleaning & polishing fluid (pink) - 1 litre

P06450 TIG Brush® TB-25 weld cleaning & polishing fluid (pink) - 5 litre

With the highest quality components at high concentrations TB-25

gives the user unequalled performance in cleaning, polishing and

passivating on the most challenging stainless steel welds. For best

results neutralise with TB-40 after cleaning.

FASTEST ACTING FLUID & BEST SELLER

PH NEUTRAL FOR ULTIMATE SAFETY

24 To order call: +(44) 0113 255 8887 // Fax: +(44) 0113 220 9858

TIG Brush® TB-41 Neutraliser

TIG Brush® TB-40 Neutraliser

CODE DESCRIPTION

P06863 TIG Brush® TB-41 neutraliser fluid (yellow) - 1 litre

P06839 TIG Brush® TB-41 neutraliser fluid (yellow) - 5 litre

CODE DESCRIPTION

P06679 TIG Brush® TB-40 neutraliser fluid (blue) - 1 litre

P06462 TIG Brush® TB-40 neutraliser fluid (blue) - 5 litre

NSF registered non-dangerous (non-flammable/non-corrosive)

formulation designed for neutralising TB-30ND without the

development of any toxic or corrosive products. TB-41 is an

important preventative step for the complete removal of any acidic

residue left from the weld cleaning process.

NSF registered non-dangerous (non-flammable/non-corrosive)

formulation designed for neutralising TB-21ND and TB-25 without

the development of any toxic or corrosive products. TB-40 is an

important preventative step for the complete removal of any acidic

residue left from the weld cleaning process.

TIG Brush® TB-50Cleaner & brightener fluid

CODE DESCRIPTION

P06854 TIG Brush® TB-50 cleaner & brightener fluid (clear) - 1 litre

P06855 TIG Brush® TB-50 cleaner & brightener fluid (clear) - 5 litre

NSF registered finishing fluid which cleans, brightens and resists

handling marks by leaving a molecular level layer on the surface of

stainless steel. Wipe or spray the cooled stainless steel with TB-

50, rinse down with clean water and then buff with a microfibre

cloth to achieve a brilliant fingerprint resistant finish.


TIG Brush® TB-90Etch marking fluid

TIG Brush® TB-95Etch marking fluid

TIG Brush® TB-90Etch marking fluid, 250ml dropper bottle

CODE DESCRIPTION

P06769 TIG Brush® TB-90 etch marking fluid (dark blue) - 1 litre

CODE DESCRIPTION

P08758 TIG Brush® TB-95 etch marking fluid (dark green) - 1 litre

CODE DESCRIPTION

P08766 TIG Brush® TB-90 etch marking fluid (dark blue) - 250ml dropper bottle

NSF registered etch marking fluid - TB-90 creates permanent

high definition dark lettering, logos etc on your finishing stainless

fabrication. Use with specially engineered conductive electrode &

felt pad for safe fast and outstanding results.


high definition dark lettering, logos etc on your finishing stainless




high definition deep lettering, logos etc on your finishing stainless



26 To order call: +(44) 0113 255 8887 // Fax: +(44) 0113 220 9858

TIG Brush® TB-95Etch marking fluid, 250ml dropper bottle

TIG Brush® Pre-etch surface cleaner 50ml sprayer

TIG Brush® Post-etch surface cleaner 50ml sprayer

CODE DESCRIPTION

P08767 TIG Brush® TB-95 etch marking fluid (dark green) - 250ml dropper bottle

CODE DESCRIPTION

P08825 TIG Brush® Pre-etch surface cleaner 50ml pump sprayer

CODE DESCRIPTION

P08826 TIG Brush® Post-etch surface sealer 50ml pump sprayer


high definition deep lettering, logos etc on your finishing stainless



For superior results clean the stainless steel with pre-etch surface

cleaner and buff off prior to the etch marking process.

Use post-etch surface sealer to clean the surface after etching and

to also protects the surface with a molecular level layer.


Spares & Accessories

TIG Brush® Spare brush tip

TIG Brush®

Spare brush tip

CODE DESCRIPTION

P06451 TIG Brush® spare brush tip - copper ferrule

CODE DESCRIPTION

P07194 TIG Brush® spare brush tip - stainless ferrule

Original replacement brush tip with threaded copper ferrule.

Original replacement brush tip with threaded stainless

steel ferrule.

TIG Brush® Spare PROPEL brush tip

CODE DESCRIPTION

P06872 TIG Brush® spare PROPEL brush tip - copper ferrule

Original replacement brush tip for the PROPEL Torch with

copper ferrule.

28 To order call: +(44) 0113 255 8887 // Fax: +(44) 0113 220 9858

TIG Brush® Single brush shroud - Short

TIG Brush® Single brush shroud - Long

CODE DESCRIPTION

P06456 TIG Brush® single brush shroud - Short

CODE DESCRIPTION

P07806 TIG Brush® single brush shroud - Long

Shroud to protect the user from heat and current exposure.

Shroud to protect the user from heat and current exposure.

TIG Brush® Neutraliser spray containerSpray bottle for use with TB-40 and TB-41 neutraliser.

Wide necked container for weld cleaning fluid, to enable easy dip

in & clean with the TIG Brush® - with water tight lid.

TIG Brush® Fluid dipping container

CODE DESCRIPTION

P01586 TIG Brush® fluid dipping container

CODE DESCRIPTION

P08367 TIG Brush® neutraliser spray bottle


Special adaptor to enable two spare brush tips to be used for

greater cleaning coverage.

Dual brush shroud to protect the user from heat and

current exposure.

TIG Brush® Dual brush adaptor

CODE DESCRIPTION

P06902 TIG Brush® dual brush adaptor

TIG Brush® Dual brush shroud

CODE DESCRIPTION

P06903 TIG Brush® dual brush shroud

TIG Brush® Quad brush adaptor

TIG Brush® Quad brush shroud

CODE DESCRIPTION

P07084 TIG Brush® quad brush adaptor

CODE DESCRIPTION

P07085 TIG Brush® quad brush shroud

Special adaptor to enable four spare brush tips to be used for

greater cleaning coverage.

Quad brush shroud to protect the user from heat and current

exposure.

30 To order call: +(44) 0113 255 8887 // Fax: +(44) 0113 220 9858

TIG Brush®

Flexi handle adaptor

CODE DESCRIPTION

P07344 TIG Brush® flexi handle adaptor

TIG Brush® Red link lead -3m

CODE DESCRIPTION

P06733 TIG Brush® red link lead 3m

Special flexi adaptor which attaches to the straight handle to

facilitate ergonomic reach to difficult to access areas.

Link lead to increase the reach of the red handle lead to 6, 9 or

12m without power drop.

TIG Brush®

Flexi handle - 3m

CODE DESCRIPTION

P06913 TIG Brush® flexi handle - 3m

Special flexi handle to facilitate ergonomic reach to difficult to

access areas.

TIG Brush® Red lead with integral moulded handle

CODE DESCRIPTION

P06454 TIG Brush® red lead with integral moulded handle - 3m

P07195 TIG Brush® red lead with integral moulded handle - 6m

Special red lead with integral moulded handle onto which the

wand is fastened.


TIG Brush®

Black lead with brassearth clamp

CODE DESCRIPTION

P06455 TIG Brush® black lead with brass earth clamp - 3m

P07196 TIG Brush® black lead with brass earth clamp - 6m

TIG Brush®

Black lead with stainless steel earth clamp

CODE DESCRIPTION

P07086 TIG Brush® black lead with stainless steelearth clamp - 3m

P08888 TIG Brush® black lead with stainless steel earth clamp - 6m

Earth lead with brass clamp & 3m lead to create the circuit

required for TIG Brush® to perform.

Earth lead with stainless steel clamp & 3m lead to create the

circuit required for TIG Brush® to perform.

TIG Brush®

Black link lead - 3m

CODE DESCRIPTION

P06768 TIG Brush® black link lead 3m

TIG Brush® Spare wand - 50mm

CODE DESCRIPTION

P06917 TIG Brush® spare wand - 50mm

Link lead to increase the reach of the black earth clamp lead to 6, 9

or 12m without power drop.

Stainless steel wand with heat resistant insulating sleeve.

32 To order call: +(44) 0113 255 8887 // Fax: +(44) 0113 220 9858

TIG Brush® PROPEL Torch complete assembly with red lead

CODE DESCRIPTION

P06622 TIG Brush® PROPEL Torch complete assembly with red lead 1

TIG Brush® PROPEL Torch replacement Teflon shroud

CODE DESCRIPTION

P06882 TIG Brush® PROPEL Torch replacement Teflon shroud

EXCLUSIVE NEW PRODUCT

New ergonomic PROPEL Torch allows the brush tip to be wound

in or out of the special shroud according to power requirement.

PROPEL Torch replacement shroud.

TIG Brush® Spare wand- 100mm

CODE DESCRIPTION

P06460 TIG Brush® spare wand - 100mm

Stainless steel wand with heat resistant insulating sleeve.


TIG Brush® Colour coded micro-fibre cloths

CODE DESCRIPTION

P07267 TIG Brush® microfibre cloth 400mm x 400mm - blue (5 pack)

P02691 TIG Brush® microfibre cloth 400mm x 400mm - orange (5 pack)

P07265 TIG Brush® microfibre cloth 400mm x 400mm - pink (5 pack)

P07266 TIG Brush® microfibre cloth 400mm x 400mm - yellow (5 pack)

P07268 TIG Brush® microfibre cloth 400mm x 400mm - green (5 pack)

Available in orange, pink, green, blue and yellow. For best results, use the blue micro fibre cloths for post weld clean down.

TIG Brush® Dual rinse bucket

CODE DESCRIPTION

P08990 TIG Brush® dual rinse bucket

This twin tub bucket enables acid contaminated water to be wrung

out of microfibre cloths into the contaminated tub before being

rinsed in clean hot water. This keeps the TIG Brush® post weld

clean wash down procedure simpler, cleaner and more effective and

reduces the likelihood of white staining appearing at a later date.

TIG Brush® Hand scratch brush

CODE DESCRIPTION

P02183 TIG Brush® hand scratch brush - 1 row stainless steel wire

Ideal for assisting TIG Brush® by helping to dislodge heavy coking

from MIG butt welds.

34 To order call: +(44) 0113 255 8887 // Fax: +(44) 0113 220 9858

TIG Brush® Mini case

CODE DESCRIPTION

P08765 TIG Brush® case mini - anthracite

Ideal for transporting and protecting TIG Brush® sets in the

workshop or on-site.

TIG Brush® Small case

CODE DESCRIPTION

P08768 TIG Brush® case small - anthracite



TIG Brush® Large case

CODE DESCRIPTION

P06828 TIG Brush® case large - anthracite




TIG Brush® Tote box

CODE DESCRIPTION

P08883 TIG Brush® tote box - anthracite

Ideal for transporting TIG Brush® fluids and consumables around

the workshop or on-site.

TIG Brush® Continental power lead

CODE DESCRIPTION

P07197 TIG Brush® lead Continental

TIG Brush® IEC 110 Volt power lead

CODE DESCRIPTION

P01578 TIG Brush® IEC lead 110 volt

TIG Brush® IEC 230 Volt power lead

CODE DESCRIPTION

P01579 TIG Brush® IEC lead 230 volt

36 To order call: +(44) 0113 255 8887 // Fax: +(44) 0113 220 9858

TIG Brush® Chemical resistant goggles

CODE DESCRIPTION

P06920 TIG Brush® chemical resistant goggles

Excellent quality chemical resistant goggles for keeping operators

safe whilst using TIG Brush®.

TIG Brush® Chemical resistant gloves

CODE DESCRIPTION

P06922 TIG Brush® chemical resistant gloves

Excellent quality chemical resistant gloves for keeping operators

safe whilst using TIG Brush®.

TIG Brush® Protective apron, heavy-duty

CODE DESCRIPTION

P08881 TIG Brush® protective apron heavy duty - blue

Excellent quality, heavy-duty protective apron for keeping

operators safe whilst using TIG Brush®.

TIG Brush® Protective apron, standard

CODE DESCRIPTION

P08021 TIG Brush® protective apron standard - purple

P06923 TIG Brush® protective apron standard - blue

Excellent quality protective apron for keeping operators safe whilst

using TIG Brush®.


TIG Brush® Type B respirator series 6500

TIG Brush® Type B respirator filter series 6057

TIG Brush® Safety helmet

CODE DESCRIPTION

P08763 TIG Brush® Type B respirator series 6500

CODE DESCRIPTION

P08764 TIG Brush® Type B respirator filter set 6057

CODE DESCRIPTION

P08880 TIG Brush® safety helmet

TIG Brush® Accessories container - blue, empty

CODE DESCRIPTION

P06914 TIG Brush® accessories container - blue/empty

Excellent quality respirator for keeping operators safe whilst using

TIG Brush®.

Excellent quality respirator filters for keeping operators safe whilst

using TIG Brush®.

Excellent quality helmet for keeping operators safe whilst using

TIG Brush®. Ideal for use on sites.

Accessories container for brushes and other small items needed

for the TIG Brush®.

38 To order call: +(44) 0113 255 8887 // Fax: +(44) 0113 220 9858

KIT CONTAINS

1x TIG Brush® case mini - anthracite

1x TIG Brush® TB-90 black etch marking fluid 250ml


1x TIG Brush® pre-etch surface cleaner 50ml spray

1x TIG Brush® post-etch surface sealer 50ml spray

1x TIG Brush® marking adaptor

10x TIG Brush® marking felt pads 38x60mm

10x TIG Brush® O ring

1x TIG Brush® stencil positioning tape - blue


1x Allowance for bespoke stencil

1x TIG Brush® etch marking electrode - 38x60mm

TIG Brush® Stainless steel marking kit

Marking & Etching with TIG Brush®

CODE DESCRIPTION

P06774 TIG Brush® Stainless steel marking kit


TIG Brush® Stencil tape printer

TIG Brush® Stencil tape printer

CODE DESCRIPTION

P06844 TIG Brush® stencil tape printer - Brother TD-4000 230 Volt

CODE DESCRIPTION

P01641 TIG Brush® stencil tape printer - Brother PTD600VP 230 Volt

Stand alone stencil tape printer for creating one off stencils 18, 24

or 36mm high.

Stand alone stencil tape printer for creating one off stencils

100mm high.

Position stencil onto the stainless steel & secure with position tape.

Wipe away excess residue with a micro-firbre cloth and some TB-40 neutraliser spray.

Perfect consistent results, ideal for food, drink and pharmaceutical industries.

Switch machine to marking function at half power, add TB-90/95 to pad and work the solution over the yellow area.

Lift the stencil back away from the stainless steel.

40 To order call: +(44) 0113 255 8887 // Fax: +(44) 0113 220 9858

TIG Brush® P-Touch ribbon

TIG Brush® P-Touch ribbon

TIG Brush® Etch marking adaptor

TIG Brush® Marking electrode

CODE DESCRIPTION

P01647 TIG Brush® P-Touch ribbon ST141 - 18mm



CODE DESCRIPTION

P06845 TIG Brush® P-Touch ribbon RD102 - 100mm

CODE DESCRIPTION

P06771 TIG Brush® etch marking adaptor

CODE DESCRIPTION

P01546 TIG Brush® marking electrode

ST141 / ST151 / ST161

Stencil tape ribbon 100mm to creating one-off stencils.

Special adaptor attached to the handle, onto which the etching

electrode is attached.

Special etching electrode which is attached to the marking

adaptor.

Stencil tape ribbon 18mm to creating one-off stencils.


TIG Brush® Etch marking felt pads 38x60mm

TIG Brush® O rings

TIG Brush® Stencil positioning tape

TIG Brush® Accessories container - blue, empty

CODE DESCRIPTION

P01527 TIG Brush® etch marking felt pads 38x60mm

CODE DESCRIPTION

P00341 TIG Brush® O ring

CODE DESCRIPTION

P08827 TIG Brush® stencil positioning tape - Blue

CODE DESCRIPTION

P06914 TIG Brush® accessories container - blue/empty

Special heat resistant felt pads to wrap round the marking

electrode.

Neoprene rubber O rings to secure the etch marking felt pads to

the electrode.

Special heat and chemical resistant tape to securely position the

stencils to the stainless whilst etching process is performed.

Plastic container for safe/dry TIG Brush® accessories storage.


WHAT DO OURCUSTOMERS THINK?

STEWART BEER

Manufacturing Manager Electrix international Ltd.

We have used the Tig Brush® system for the last 4 years. We used the traditional methods of passivating welds involving the use of hydrofluoric acid type pickling gel for over 20 years – Engineering Utilities recommended the Tig Brush® system, using water based, environmentally safe chemicals. We trialled the system with the guidance of Nigel Soulsby and shortly after ordered several systems, replacing our traditional methods completely ‘I could not believe the results, safer and quicker to use with no loss of product quality, it was an easy decision to make’

LINCAT Ltd

The TIG Brush®, is by far the most efficient electrolytic weld cleaner that we have ever used and with its range of safe chemicals and products it answers many of our safety issues we’ve had in the past.


To find out which machine could revolutionise your business call us on +44 (0) 113 255 8887

Since the introduction of the TIG Brush® we have made many cost savings, reduced our polishing time and the reliablity of it is fantastic.

LINCAT Ltd

SPOONER INDUSTRIES Ltd

Not only does it achieve high quality end results with as yet to date on site zero corrosion. Also the liquids employed are very user friendly.

Refering to the TIG Brush®

SCAN THE QR CODE

TO VIEW THE FULL

TESTIMONIAL

SCAN THE QR CODE

TO VIEW THE FULL

TESTIMONIAL


BOOK A DEMONSTRATION & WE’LL SHOW YOU JUST HOW

CLEAN YOUR WELDS CAN BE

Simply visit our website www.tigbrusheurope.com and fill out a request form. Call us on +(44) 0113 255 8887 or send us an email at

[email protected]

REQUEST A FREE USB CONTAINING VIDEOS,

TESTIMONIALS AND INFORMATION REGARDING

OUR WHOLE TIG Brush® RANGE.

FOLLOW US AT // // VISIT US AT @E_utilitiesengineering-utilities

Engineering Utilities Limited75 Swinnow Lane, Bramley

Leeds LS13 4TY England

email: sales ......visit or call us on (44) 0113 255 8887 to arrange a free demo 3 introduction the...

Documents