companygraftpolymer.com/wp-content/uploads/2019/09/polymeric-alloys-graftamid™-b.v9.pdfmejaceva...
TRANSCRIPT
1
Rev.no. 9P
FUNCTIONAL MODIFIERS & POWDERS
POLYMER ALLOYS
CROSSLINKING SOLUTIONS
SYNTHESIS
POROUS
R&D
POLYMERIC ALLOYS - GRAFTAMID™
Bring flexibility and good thermo-mechanical properties to
your materials with GRAFTAMID™.
GRAFTAMID™ line of products combine separate material’s
best properties with co-continuous nano morphology.
Enhance your existing materials or use it as a standalone
material for chemical resistance and good barrier properties.
Products
Pipeline 2019
Using our own
properiatery
technology
Company
Businness Units
2
*Polyolefin base, polyamide, and all properties can be tailored to customer request
GRAFTAMID ™ GRADES POLYOLEFIN GRAFTED WITH PA
PROPERTY TEST METHOD EB-PA 01506 EB-PA 01566 EB-PA 02046 EB-PA 02012 EV-PA 02006
Polyolefin base Ethylene butyl acrylate Ethylene butyl acrylate Ethylene butyl acrylate Ethylene butyl acrylate Ethylene butyl acrylate
Polyamide PA 6 PA 66 PA 46 PA 12 PA 6
Melting point (°C) DSC 210°C 250°C 285°C 210°C 210°C
Melt Index(g/10min)
ISO 1133
250°C, 2,16 kg 250°C, 2,16 kg 280°C, 2,16 kg 250°C, 2,16 kg 250°C, 2,16 kg
18 13 19 18 20
Density ISO1183 0,966 0,97 0,990 0,966 0,966
Stress at break(MPa) ISO 527 1A 9,3 10,9 9,9 9,3 9,3
Elongation at break (%) ISO 527 1A >200 >200 >200 >200 >200
Hardness ShoreA
ISO868 97 96 97 97 97
ShoreD
ISO868 30 34 37 30 30
3
GRAFTAMID™
EB-PA 01506
EB-PA 01566
EB-PA 02046
EB-PA 02012
EV-PA 02006
Ethylene Butyl Acrylate
and Polyamide alloy
PRODUCT INFORMATION
GRAFTAMID™ EB-PA - is based on EBA matrix, and
polyamide 6/ 66/ 46 and 12, with increased thermo-mechanical
properties. Offers good barrier properties, chemical resistance,
low moisture uptake and easy processing. Can be used as
compatibilizer for PA blends/compounds or as a standalone
materia.
Applications
GRAFTAMID™ EB/EV-PA has high service temperature,
High melt temperature,
Useful for cable compounds,
Chemical packaging,
PA blends and compounds.
4
MARKET APPLICATIONS
Application Key properties
Oil filler tubes
Flexibility
Fatigue resistance
Resistance to oils
Low density
Good melt strength
Liner for gas tank Barrier to CH4 (better than PE)
Cold impact resistance
Easy processing
Air intake ducts
Thermal resistance ( better than TEEE)
Flexibility
Fatigue resistance
Low density
Good Melt strength
Easy to switch to from similair products
Barrier layer for air conditioning
hoses
Combination with rubber
Direct contact with lubricants
High barrier properties forrefrigerants
Flexibility
Low density
LPG line Barrier properties to LPG
Resistance to automotive fluids
Flexibility
Chemical packaging
Return tubing for driving cable in
sunroof system
Monolayer or three layer by extrusion blow molding
Light weight
Dimensional stability
Chemical resistance
Excellent flexibility and surface properties
Noise reduction
Dimensional stability
Thermal resistance
Chemical resistance to hydrocarbons
Cable: plastic protection profile Good resistance to both water& hydrocarbons
Low abrasion & friction
Low creep
Fuel station pipe Barrier to fuels (diesel and gasoline)
Good impact resistance at -30°C on tubing
Hydraulic tubing Flexibility
Resistance to water, hydrocarbons, and chemicals
Cable: tape Resistance to water & hydrocarbons
Low abrasion & friction
Low creep
Profiles & rolls (conveyors
industry)
Low abrasion & friction and heat built up
Chemical resistance
Cold impact resistance
Food approved
5
MARKET APPLICATIONS – PART2
Off-shore cable sheathing
Replacement of EVA/PVC with lead sheathing
Only 1 layer: weight and flexibility gain
Resistance to water & hydrocarbons
Low friction coefficient
Technical films
Barrier properties
Chemical resistance
Thermal resistance
Mechanical strength
Low surface tension
Electric connectors Dimensional stability
chemical resistance to automotive fluids
Complex parts
Sport
Light weight
Dimensional stability
Sturdy and secure
UV resistant
Tube clamping (mainly RS6000)
Low moisture pick-up
Chemical resistance
Stiffness
Impact resistance
Combination (co-molding with PP resins)
Ablition plate for miniature circuit
breaker
Excellent Arc resistance
Good insulation properties
Excellent processing ability
Fan shroud
Dimensional stability
No conditioning required
Vibration dampening
Low molding tolerances
6
CONTACTS
MANAGEMENT
CEO/CTO | Victor Bolduev +386 40 534 739
Executive Director / CMO| Pavel Kobzev +386 40 867 937
GRAFT POLYMER D.O.O (OFFICE)
Emonska Cesta 8, Ljubljana Slovenia.
Company Num. 8056200000,
VAT. SI 30561345
Tel +386 1 777 6561
www.graftpolymer.com
GRAFT POLYMER D.O.O (PRODUCTION/WAREHOUSE)
Mejaceva ulica 2, 1353 Borovnica Slovenia
Company Num. 8056200000,
VAT. SI 30561345
www.graftpolymer.com
GRAFT POLYMER (UK) LTD
Central Working Victoria Eccleston Yards 25,
Eccleston Pl, London, UK, SW1W 9NF.
Company Num. 10776788, VAT. 281712016
www.graftpolymer.com