+61-7 3853 2304 [email protected]

TRANSPORT SAFETY SIGNS2018/2019 Catalogue29

YEARSSUPP

LYING TRANSPORT SAFETY

SIGNS FOR 2018

2019

A PRODUCT OF COLORCORP PTY LTD

www.colorsign.com.au +61-7 3853 2304 [email protected]

WELCOMEColorcorp keeps the trucking industry moving safely. Colorsign, our brand of reflective truck signage, provides a wide variety of safety signage for vehicles. Our quality decals are mounted on either aluminium or zincanneal for easy installation. Signs are scratch & fade resistant to the general wear and tear of day to day trucking.

CONTENTS

Rear Markers

Pages 4 - 5

Over Dimensional

Pages 6 - 7

Over Dimensional Hinged

Page 8

Sign Holders

Page 9

General Signs

Pages 10 - 11

Dangerous Goods Labels

Pages 12 - 13

Over Dimensional & Safety

Page 14

Day & Night Safety

Page 15

Bus Signage

Page 16 - 18

Hazchems

Page 19

Safety Products

Page 20

Colorcorp Point of Sale

Page 21

Colorcorp Fleet Graphics

Page 22-23

Rear Marker Installation Instructions

Pages 24-27

SERVICING THE TRANSPORT INDUSTRY FOR OVER 25 YEARS

Colorsign OnlineEmail: [email protected]: www.colorsign.com.au

Unit 2, 263 Toombul Road, Northgate Qld 4013Phone: +61-7 3853 2304 Facsimile: +61-7 3853 2345

TOP LEFT

COLO

RSIGN

AS1906 CLA

SS 2

TOP RIG

HT

COLORSIGN CIXT030

TO

P L

EFT

COLORSIGN

AS1906 CLASS 2

TOP RIGHT

COLO

RSIG

N

CI

XT03

0

CLASS 1 REAR MARKERLeft or right hand mount - 300 x 300mm

(N/B Sold individually, this is not a set)

Aluminium Code: CIXT027A400mm x 400mm Aluminium

(CRN No. 24159)

Rotate 90 degrees for right hand mounting

Rear Markers - Class 1

81A 41A 615A

81B 41B 615B

41B41A 81C

This is a brief outline describing when and where to install Class 1 plates on a vehicle:

1) Category 33 plates should be placed on the rear, near vertical surface of the vehicle. Any vehicles that are 7.5 metres or over in length should also be fitted with category 31L or 33L plates, located on the left side of the vehicle above the category 33 plate.

2) Category 34 plate is not to be used on vehicles with an overall length or less than 7.5 metres. When positioning place the plate on the rear, near vertical surface of the vehicle at the left hand side in combination with a category 33 plate right hand side only.

3) Due to space limitations which can prevent the use of Category 33 & 34 plates, Category 41, 81 & 161 can be used (other than on prime movers). They should be placed on the rear, near vertical surface of the vehicle. They can be positioned either horizontally or vertically. Any vehicle that is 7.5 metres or over, a Category 31L or 33L should also be located on the left hand side.

4) Prime movers should have a pair of Category 615 plates fitted, which are to be placed on a rear vertical surface (e.g. mud flaps) at the rear of a vehicle. It is also recommended that a Category 31L plate be placed above on the left hand side.

REAR MARKER - LEFT or RIGHT300 x 300mm


Decal : CIXT027/D Aluminium : CIXT027/A

(CRN No. 24159)

DO NOT OVERTAKE TURNING VEHICLE - LEFT USE ONLY

300 x 100mm


2x 800 x 100mm

Decal : CIXT038/D2 Aluminium : CIXT038/A2

(CRN No. 24165)


300 x 300mm


(CRN No. 24166)

1600 x 100mm


(CRN No. 24165)

4x 400 x 100mm


(CRN No. 24165)


300 x 400mm


(CRN No. 24160) (May be paired with CIXT027)

2x 400 x 100mm1x 800 x 100mm


(CRN No. 24165)

2x 600 x 150mm


(CRN No. 24164)

Category 81 A & 81B Category 41A & 41B Category 615A & 615B

Category 33 PlatesCategory 33L PlateCategory 34L Plate

Category 31L Plate Category 161 Category 41A, 41B, 81C

4




TOP LEFT

COLO

RSIGN

AS1906 CLA

SS 2

TOP RIG

HT

COLORSIGN CIXT030

TO

P L

EFT

COLORSIGN

AS1906 CLASS 2

TOP RIGHT

COLO

RSIG

N

CI

XT03

0

CLASS 2 REAR MARKERLeft or right hand mount - 300 x 300mm


Decal Code: CIXT030D400mm x 400mm Decal

Metal Code: CIXT030M400mm x 400mm Metal

Alum Code: CIXT030A400mm x 400mm Aluminium

(CRN No. 24161)

Rotate 90 degrees for right hand mounting

Rear Markers - Class 2

DO NOT OVERTAKE TURNING VEHICLELEFT USE ONLY - 400 x 400mm

Decal : CIXT031/D Metal : CIXT031/M Aluminium : CIXT031/A

(CRN No. 24162) (May be paired with CIXT030)

REAR MARKER - LEFT or RIGHT - 400 x 400mm(N/B Sold individually, this is not a set)


(CRN No. 24161)

DO NOT OVERTAKE TURNING VEHICLE2x 800 x 75mm


LEFT & RIGHT2x 900 x 200mm

DECAL : CIXT029/D METAL : CIXT029/M ALUMINIUM : CIXT029/A

(CRN NO. 28337)

DO NOT OVERTAKE TURNING VEHICLELEFT USE ONLY - 430 x 300mm

Decal : CIXT001/D Metal : CIXT001/M



(CRN No. 24163)



(CRN No. 24167)

Rear Marker - Plain

Rear Marker - Type 1

Rear Marker - Do Not Overtake

Rear Marker - Type 2

Rear Marker - Type 5 Do Not Overtake

Do Not Overtake - 2 Piece

5




Over Dimensional

VINYL BANNER1200 x 450mm

Banner : CIXT007/RB 2 Piece Banner : CIXT008/RB

1200 x 450mm

Decal : CIXT007/D Metal : CIXT007/M Aluminium : CIXT007/A Magnetic Rubber : CIXT007/MAG

CIXT020/F

A : 1200mm B : 1285mm C : 610mm D : 1640mm E : 680mm

SINGLE SIDED1200 x 600mm

Metal : CIXT019/M Aluminium : CIXT019/A

DOUBLE SIDED1200 x 600mm

Metal : CIXT020/M Aluminium : CIXT020/A



1200 x 450mm

Plastic : CIXT007/P

Road Train : Also fits 2 Piece Long Vehicle - 2 @ 510 x 250mm: CIXT-V/COVER-RT-BK (Black): CIXT-V/COVER-RT-GY (Grey/Silver): CIXT-V/COVER-RT-RD (Red): CIXT-V/COVER-RT-YL (Yellow): CIXT-V/COVER-RT-WH (White): CIXT-V/COVER-RT-BLU (Blue)

Oversize : CIXT-V/COVER-OS-BK - 2 @ 600 x 450mm Western Star : CIXT-V/COVER-WS (Black - Welded) - 2 @ 510 x 250mm

: CIXT-V/COVER-WS-S (Black - Stitched) - 2 @ 510 x 250mm

A

B

CE

D

Oversize

Oversize

Oversize

Oversize - 2 Piece

Vinyl Sign Covers - Set of 2

Pilot Sign - Single Sided Pilot Sign - Double Sided

Pilot Vehicle Oversize Load Ahead Frame

6




Over Dimensional

EACH PIECE - 510 x 250mm


1020 x 250mm



Decal : CIXT009/2ED Metal : CIXT009/2EM Aluminium : CIXT009/2EA Magnetic Rubber : CIXT009/2EMAG

LEFT PIECE - 405 x 250mmRIGHT PIECE - 615 x 250mm

Decal : CIXT009/2D Metal : CIXT009/2M Aluminium : CIXT009/2A Magnetic Rubber : CIXT009/2MAG


Banner : CIXT009/RB


Banner : CIXT005/RB


Banner : CIXT012/RB MADE TO ORDER

1020 x 250mm


Road Train - 1 Piece

Road Train Triple Road Train

Long Vehicle - 1 Piece

Road Train - 2 Piece

Long Vehicle

Long Vehicle - 2 Piece Long Vehicle - 2 Piece (Equal Lengths)

7




Over Dimensional Hinged


Metal : CIXT008/HM Aluminium : CIXT008/HA

1200 x 450mm


1020 x 250mm

Metal : CIXT011/THM

LEFT PIECE - 405 x 250mmRIGHT PIECE - 615 x 250mm

Metal : CIXT009/2HM Aluminium : CIXT009/2HA

1020 x 250mm




1020 x 250mm



Metal : CIXT010/THM


Metal : CIXT009/2EHM Aluminium : CIXT009/2EHA

Oversize Hinged

Road Train Hinged - 1 Piece

Oversize Hinged - 2 Piece

Road Train Hinged - 2 Piece

Long Vehicle & Road Train Triple Hinged - 2 PieceLong Vehicle & Road Train Triple Hinged - 1 Piece

Long Vehicle Hinged - 2 Piece (Equal)

Long Vehicle Hinged - 1 Piece

Long Vehicle Hinged - 2 Piece

8




Sign Holders

LOCK PINS SOLD SEPARATELY

CIXT-TOGGLE

METAL HOLDERS

2x 510 x 250mm : CIXT186 2x 510 x 250mm : CIXT186/SIDE

METAL HOLDER

1020 x 250mm : CIXT179

METAL HOLDER

800 x 600mm : CIXT169METAL HOLDER

250 x 250mm : CIXT167 250 x 250mm with Holes : CIXT173

METAL HOLDERS

405 x 250mm & 615 x 250mm : CIXT185

METAL HOLDER

1200 x 450mm : CIXT174METAL HOLDERS

2x 600 x 450mm : CIXT184

Long Vehicle / Road Train - 1 Piece

Oversize - 1 Piece Oversize - 2 Piece

Long Vehicle / Road Train - 2 Piece

Long Vehicle - 2 PieceHinged Sign Lock Pin

Diamond Hazchem

9




General Signs

REFLECTIVE1150 x 210mm


300 x 170mm


800 x 75mm


250 x 250mm

Decal : CIXT036/DSQ Metal : CIXT036/MSQ

250 x 250mm


1020 x 250mm


680 x 80mm



Decal : CIXT219/D

Speed Limited Slow Vehicle

No Access

If You Cannot See My Mirrors If You Cannot See My Mirrors

Explosives

Speed Limited Speed Limited

10




General Signs


Decal : CIXT211/D


Decal : CIXT112/D

SIZE AS REQUIRED(P.O.A)


390 x 290mm


600 x 450mm

Decal : CIXT205/D Metal : CIXT205/M Banner : CIXT205/RB

450 x 300mm



Banner : CIXT229/RB


Banner : CIXT003/RB

Drought Stock Caution Vehicle Under Tow

Highly Flammable Combustible Liquid

Driver Under Instruction

Wide Turn Decal

Vehicle Stops Frequently

Caution Left Hand Drive

11





CLASS 1250 x 250mm

Decal : CIXT060/D Metal : CIXT060/M PVC : CIXT060/P

CLASS 2250 x 250mm


CLASS 1250 x 250mm


CLASS 2250 x 250mm


CLASS 1250 x 250mm


CLASS 3250 x 250mm


CLASS 4250 x 250mm


CLASS 4250 x 250mm


CLASS 4250 x 250mm


CLASS 1250 x 250mm


CLASS 2250 x 250mm


CLASS 2250 x 250mm


Explosive 1.6 Flammable Gas Explosive 1.5

Explosive

Oxidizing Gas

Explosive 1.4

Toxic Gas

Explosive 1.5

Flammable Liquid

Flammable Solid Spontaneously Combust. Dangerous When Wet

12





CLASS 5250 x 250mm


CLASS 9250 x 250mm


CLASS 5250 x 250mm


MIXED CLASS250 x 250mm


CLASS 6250 x 250mm


250 x 250mm


FLIP OVER VEHICLE PLACECARDS

Placecard : CIXT058/B Single Clip : CIXT058/C

Perspex : CIXT170 Vinyl : CIXT171

EPG Pocket Holder with a Vehicle Fire Card EPG Cards : CIXT172

(Miscellaneous UN# Required)

CLASS 6250 x 250mm


CLASS 7250 x 250mm


CLASS 8250 x 250mm


Diamond Book Procedures Folders

Oxidizing Agent

Misc. Dangerous Goods

Organic Peroxide

Dangerous Goods

Toxic

Elevated Temperature

Infectious Substance Radioactive Corrosive

13




Over Dimensional & Safety

AVAILABLE SIZES:300mm, 450mm, 700mm & 900mm

300mm - Plain : CIXT155/300 450mm - Plain : CIXT155/450 Reflective : CIXT156/450 700mm - Plain : CIXT155/700 Reflective : CIXT156/700 900mm - Plain : CIXT155/900 Reflective : CIXT156/900

300 x 300mm

Class 1 : CIXT024/M Class 2 : CIXT025/M

450 x 450mm

Class 2 : CIXT023/M

450 x 450mm

Flag : CIXT115 Poled Flag : CIXT115/P Roped Flag : CIXT115/R

450 x 450mm

Flags : CIXT114/KSingle Flag with Bungy Strap : CIXT114/BS

450 x 450mm

Flag : CIXT114 Poled Flag : CIXT114/P Roped Flag : CIXT114/R

142 x 142mm

Decal : CIXT127/D

Mesh Warning Flag Mesh Warning Flag Kit (4 Flags in a Bag)

Emergency Exit

Delineator Nylon Warning Flag

Traffic Cones - Fluorescent Red/Orange

14




Day & Night Safety

Yellow : CIXT157/Y Orange : CIXT157/O• Day use only• Fire retardand fabric with an anti-static finish for added safety• Can be ordered in 2 flourescent colours (yellow or orange)

Meets the Australian Stardard 4602:1999

Sizes - L, XL & XXL Sizes - L, XL, XXL & XXXL

Scotchlite - Conspicuity TapePowerful Protection Against Collisions

Roll Length: 50m & 45.7mOrder Per Metre

50mm Wide : CIXT132/D 90mm Wide : CIXT134/D

Roll Length: 50mOrder Per Metre

55mm Wide : CIXT141/D (Red) 55mm Wide : CIXT143/D (White) 55mm Wide : CIXT144/D (Yellow)

Roll Length: 50m & 45.7mOrder Per Metre

50mm Wide : CIXT137/D 90mm Wide : CIXT135/D

Roll Length: 45.7mOrder Per Metre

50mm Wide : CIXT130/D

Roll Length: 3mOrder Per 3m

100mm Wide : CIXT146/DR (Right)100mm Wide : CIXT146/DL (Left)

CIXT164

3 Compact Reflective Triangles, supplied in a reusable high impact moulded plastic box. Easy to erect Triangles that unfold from a weighted base equipped with non-slip pads.

Studies show that conspicuity markings reduce the probability of serious accidents. Drivers rely on what they can see and vehicles marked with reflective sheeting provide better visual information for faster, more accurate visual marking by drivers.

Brightness - Six times brighter than conventional sheeting and it maintains its superior conspicuity with a bright white appearance during the day and high reflectivity at night.Outlines - Helps identify vehicle size and type.Durability - Resists weather, dirt and ageing.

RIGHTLEFT

Yellow : CIXT158/Y Orange : CIXT158/O• 50mm wide reflective strip• Day and Night use• Fire retardand fabric with an anti-static finish for added safety• Can be ordered in 2 flourescent colours (yellow or orange)

Meets the Australian Stardard 4602:1999

High Visibility Safety Vests - Night & DayHigh Visibility Safety Vests - Day Use

Red & White Tape

Conspicuity Tape

Black & Yellow Tape

Red & White Conspicuity Tape

Red & Yellow Tape

Breakdown Warning Kit

15




Bus Signage

490 x 35mm

Push Window - In : CIXT122/D Push Window - Out : CIXT123/D Pull Window - Out : CIXT124/D

750 x 150mm

Decal : CIXT120/D Metal : CIXT120/M Magnetic : CIXT120/MAG

900 x 70mm

White Decal : CIXT129/D-W Yellow Decal : CIXT129/D-Y

370 x 360mm


400 x 250mm

Decal : CIXT121/D Metal : CIXT121/M Magnetic : CIXT121/MAG

460 x 460mm

Decal : CIXT128/D

275 x 40mm

Red on Lumitac Decal : CIXT405/D550 x 70mm

Red on White Reflective Decal : CIXT402/D

630 x 65mm

White on Red Decal : CIXT139/D-R Red on White Decal : CIXT139/D-W

Emergency Exit

Emergency Exit Emergency Exit

Give Way To Buses Warning Children 40 Km/h Bus

School Bus When Lights Flash

Emergency Exit

16




Bus Signage

1225 x 70mm

Black on Yellow Reflective Decal : CIXT407/D2100 x 165mm

Red & Black on Yellow Reflective Decal : CIXT401/D

165 x 135mm


110 x 125mm


165 x 135mm

Red on Lumitac Decal : CIXT416/D

110 x 125mm


401/D 2

1050 x 165mm

Red on Yellow Reflective Decal : CIXT406/DEmergency Hammer & Bracket

Regular Hammer : CIXT110Hammer with Belt Cutter : CIXT110/C

2406/D RVM2 RIGHT RIGHT

LEFT 406/D 2RVM2 LEFT

Emergency Break Glass




Do Not Overtake Turning Vehicle Do Not Overtake Turning Vehicle

COLORCORP PART NO: DNOTV CIXT407/D

Red & Yellow Reflective Emergency Hammer

17




Bus Signage

100 x 40mm

Red on Clear Decal : CIXT410/D100 x 40mm

Red on Clear Decal : CIXT409/D150 x 80mm


110 x 110mm




55 x 75mm

Black on White Decal : CIXT414/D55 x 75mm

Black on White Decal : CIXT415/D100 x 60mm

Black on Clear Decal : CIXT418/D

125 x 85mm

Red on White Reflective Decal : CIXT408/D125 x 85mm


Break Glass Panels

Turn Door Release Turn Door Release Door Release

Break Window Kick Out Panel

Cup Bin Tissue Bin Pull Lever To Open

In Emergency Break Glass In Emergency Break Glass Panel

18




Hazchems

400 x 300mm


Printed with requested Hazchem details & Specialist Advice (image is sample only)

800 x 600mm


Printed with requested Hazchem details & Specialist Advice (image is sample only)

350 x 135mm

Decal : CIXT049/DREFLECTIVE - 600 x 200mm

Metal Only : CIXT052/M

• Please note that all Hazchem signs are made to order.• These signs are produced in accordance with the Australian Dangerous Goods Code and therefore each sign is produced with

the product code, UN No. and Hazchem code applicable to the Dangerous Goods being carried.• When ordering please specify the UN number or Substance that you wish to have produced.

800 x 400mm


Printed with requested Hazchem details(image is sample only)

800 x 600mm

Decal : CIXT039/DVINYL BANNER800 x 600mm

Banner : CIXT048/B(Clear pockets, Eyelets & Ropes)

Banner : CIXT048/B2(Eyelets & Ropes)


Banner : CIXT048/B4Printed with requested Hazchem details

& Specialist Advice (image is sample only)

Emergency Info Panel

Emergency Info Panel - Blank Emergency Info Panel - Banner

Emergency Info Panel - Banner

Emergency Info Panel

Building Outer - Single Product Panel

Building Outer - Warning Panel Special Advice Decal

19




Safety Products

CIXT161/LED

CIXT162 BOTTLE ONLY with METAL BRACKETCIXT176

30 LITRE & 50 LITRE CAB KITS

30 Litre : CIXT152/30 50 Litre : CIXT152/50 Bag : CIXT152/30B

CIXT160

• Polycarbonate full face shield

• Polyurethane coated tyvek 1 piece coveralls

• PVC Gaunlet type gloves 14 inch

• Twin respirator Mouldex 8000 with cartridges. Workcover approval no. 1712

• 500mL sterile saline eyewash

• Tyvek overboots• Safety LED Torch• Yellow PVC bag

CIXT159

• PVC Gaunlet type gloves 14 inch• 500mL sterile saline eyewash• Splash proof safety goggles• Safety LED torch• Yellow PVC bag

Protective Equipment Kit Flammable Liquid Protective Equipment

Eye Wash Solution Eye Wash Applicator Bottle

Spill Response Kit Safety LED Torch

20




Colorcorp Point of SaleColorcorp manufactures a wide range of point of sale signage to promote your business. We print using the latest technology and printers, have exceptional turnaround and service. Why not give us a call!

• Corflutes• Vinyl Banners• Pull Up Banners• Tear Drop Banners• Window Decals• Building Signage• Posters• Standees• Mesh Hoarding and Banners

21




Colorcorp Fleet GraphicsFleet graphics are a low cost medium to promote your brand, company or product through the use of small or large format, high impact graphics.

Unlike many types of outdoor signage, fleet graphics have an extensive scope for opportunities. From the city to the outback, fleet graphics provide medium to long term campaign requirements.

Get your message mobile with fleet graphics.

We provide outstanding quality and unsurpassed product reliability.

Combined industry partnerships allows Colorcorp Fleet Graphics to supply an unparalleled fleet graphics programme.

This programme can include:• Project management of all graphics activities• Provision and installation of graphics for rigid sided vehicles• Provision and installation of flexible curtains including graphics• Nationwide installation capabilities• Comprehensive warranty on all components of fleet decoration

22



Unit 2, 263 Toombul Road, Northgate Qld 4013Phone: +61-7 3853 2304 Facsimile: +61-7 3853 2345 23





Installation requirements - Class 1, Class 1A and Class 2 marking plates

• A vehicle must not be fitted with a mixture of Class 1 and Class 2 retroreflective marking plates.• Rear marking plates are to be located on a rear, near-vertical surface.• Pairs of marking plates should be positioned symmetrically about the centre line of the vehicle and at the same height from the

ground.• It is recommended that for vehicles over the 7.5 metres long, the “DO NOT OVERTAKE TURNING VEHICLE” sign be fitted,

either as a separate sign located on the left hand side or incorporated in the left hand side marking plate. If such a vehicle (meaning the towing vehicle together with the trailer and load) will need to straddle lanes when turning, then it must be fitted.

• It is not permitted to fit categories of rear marker plates containing the text “DO NOT OVERTAKE TURNING VEHICLE” (i.e. ‘Legend’ plates 34, 31L and 33L) to vehicles with an overall length less than 7.5m, other than to the trailer or semitrailer of an articulated combination, where the total articulated vehicle length will exceed 7.5m when coupled.

• The colour bands of all “strip” type rear marking plates shall be oriented to slope down and outwards (away from the centre of the vehicle).

• Rear marking plates should not be bent to suit the contour of a non-flat mounting surface.• Cutting of the marking plate to suit a restricted space or to span fixed and moveable sections of the vehicle should be avoided

and the alternative styles of marking plates should be considered. Where cutting is unavoidable, any resulting gap between the sections of the plate should not exceed 10mm after installation.

• Category 615A and 615B Class 1 material rear marking plates are intended only for horizontal installation on the rear of a prime mover. (See figure 10)

• Class 1 retroreflective material must be applied to the required backing material made of aluminium and complying with AS1734.

• Australian Standard AS4001.2 - 2003 contains additional information about the installation of retroreflective rear marking plates.

Figure 5 (Class 1)

Installation of rear marking plates made from Class 1 and Class 1A material

(all dimensions in millimetres)

24





Figure 6 (Class 1)

Figure 7 (Class 1)

Figure 8 (Class 1)

Installation of rear marking plates made from Class 1 and Class 1A material

25





Figure 11 (Class 1)

Installation of rear marking plates made from Class 2 material

(all dimensions in millimetres)

Figure 10 (Class 1)

Figure 9 (Class 1)

26





Figure 12 (Class 2)

Figure 13 (Class 2)

Turning Vehicle Sign

If your vehicle (meaning the towing together with the trailer and projecting load) is 7.5 metres long or longer, you may have the sign “DO NOT OVERTAKE TURNING VEHICLE” displayed at the rear of the rear most vehicle. This can be either a separate sign or the words can be incorporated on either the left hand marking plate only, or both left and right plates. By having this sign attached to the rear of your vehicle, other following vehicles must give way to you.

Please note that if your vehicle (meaning the towing vehicle together with the trailer and projecting load) needs to straddle lanes or turn from an adjacent lane in order to turn left or right at intersections, and it is 7.5 metres long or longer, you must have the sign “DO NOT OVERTAKE TURNING VEHICLE”. Not having “DO NOT OVERTAKE TURNING VEHICLE” sign on these vehicles is illegal.

The “DO NOT OVERTAKE TURNING VEHICLE” sign must not be displayed in certain jurisdictions where a vehicle (or combination) is less than 7.5m long.

REMEMBER

• Only use rear marking plates made with approved retroreflective material.

• Keep the plates clean and in good condition.• Plates must not be obscured by the other parts of the

vehicle, load or tarpaulins.

Installation of rear marking plates made from Class 2 material

27


Colorsign Online

Email: [email protected]: www.colorsign.com.au

+61-7 3853 2304 [email protected]

Documents