; '+3 6shflÀfdwlrqv...processor return line fitting, oil cooler, o-ring face seals,...
TRANSCRIPT
Engine
Isuzu AI-4HK1X Tier 3 turbocharged diesel engine with
electronic fuel control, 4-cylinder, water-cooled, EGR with
cooler, Air-to-air intercooler, Fuel cooler, Auto idle start, Neutral
safety start, Glow plugs, Auto warm-up, EPF engine protection,
Dual stage fuel filtration, Remote oil filter, Green plug oil drain.
SAE net horsepower .............. 177 HP (132 kW) @ 2,000 rpm
Displacement ................................................................... 5.2 L
Maximum torque.................. 469 lbf-ft (636 N-m) @ 1,500 rpm
Starter ..................................................................... 24V-5.0kW
Alternator ...................................................................... 50 amp
Battery .......................................................... 92 x 2 amp hours
Cab and Controls
Oregon OSHA certified side-entry forestry cab, KAB® 855 air-
suspension seat with belt, Control panel with illuminated soft-
touch switches, LCD monitor, Low-effort controls pre-wired for
auxiliary hydraulics, Sliding 4-position tilting control consoles,
Climate control, Sky roof, (2) Intermittent windshield wipers
with washer, Single pedal travel, Travel alarm, Footrests, Cup
holder, 12-volt outlet, Digital clock, 24-volt cigarette lighter,
Ashtray, Dome lights, Coat hook, Adjustable horn, Mirror,
Handrails with deflector, Floor mat, Emergency exit.
Selectable working modes, Anti-theft password protection
system, On-board self-diagnostic system with memory,
Auto-idling system, One-touch decelerator, Gate lock safety
shutoff.
A/C output..........................................................18,100 BTU/hr
Heater output .....................................................20,150 BTU/hr
Hydraulic System
Open-center system, (2) variable displacement axial piston
pumps, (1) gear pump for pilot controls, (1) gear pump/valve
for processor rotate, Main control valve with one 4-spool
valve and one 5-spool valve with auxiliary spool, Combination
double-pump flow to processor, Auxiliary pump for rotate,
Processor return line fitting, Oil cooler, O-ring face seals,
High-performance 6-micron return filter, Firewall.
Hydraulic Pumps
Maximum flow .............................. 2 x 61.8 gpm (2 x 234 l/min)
Pilot pump maximum flow ........................... 5.3 gpm (20 l/min)
Auxiliary pump maximum flow .................. 9.7 gpm (36.8 l/min)
Relief Valve Settings
Boom up/arm/tool ....................................... 4,970 psi (343 bar)
Swing circuit ............................................... 4,260 psi (294 bar)
Travel .......................................................... 4,970 psi (343 bar)
Hydraulic Oil Filtration
Return filter ................................................................. 6 micron
Pilot filter ..................................................................... 8 micron
Suction screen....................................................... 105 micron
Swing
Planetary reduction powered by axial piston motor. Internal
ring gear with grease cavity for swing pinion. Swing bearing
is single-row shear type ball bearing. Mechanical disc swing
brake. Auto power swing.
Swing speed ........................................................... 0 - 8.7 rpm
Tail swing ........................................................... 9´ 8 (2.94 m)
Swing torque ................................... 68,200 lbf-ft. (92.5 kN m)
Undercarriage
High-Wide or High-Narrow track gauge options with x-pattern
carbody, Full-length track guards, Sealed and strutted track
chain, Sealed rollers and idlers, Idler mount reinforcement,
Two-speed independent hydrostatic travel with compact
planetary final drive, HD travel motor covers, Disc type brakes,
Adjustable track tension, HD swivel guard – hinged.
Carrier rollers ............................................................ 2 per side
Track rollers .............................................................. 8 per side
Track link pitch ................................................. 8.50 (216 mm)
Shoes ..................................................................... 47 per side
Shoe width ....................................................... 27.5 (700 mm)
Ground Pressure (High-Wide)
Side-entry cab, 9 riser ........................... 8.15 psi (.562 bar)
Lubricant and Coolant Capacity Fuel tank ................................................. 108.3 gal. (410 liters)
Hydraulic tank ........................................... 38.8 gal. (147 liters)
Hydraulic system ...................................... 66.0 gal. (250 liters)
Final drive (per side) .................................... 2.5 gal. (9.5 liters)
Swing drive .................................................. 1.6 gal. (6.0 liters)
Engine oil ................................................. 6.10 gal. (23.1 liters)
Cooling system ........................................ 6.65 gal. (25.2 liters)
Travel System
Two-speed independent hydrostatic travel with compact
axial piston motors. Hydraulic motor powered output shaft
coupled to a planetary reduction unit and track sprocket.
All hydraulic components mounted within the width of side
frame. Automatic downshift. Single pedal travel. Spring
applied, hydraulically released disc parking brake built into
each motor. Each travel motor equipped with counterbalance
valve to prevent overspeeding down an incline.
Max. travel speed .......................... 1.6 - 2.7 mph (2.6 - 4.3 km/h)
Drawbar pull ................................................. 60,300 lbf (268 kN)
Gradeability ................................................................ 70% (35°)
Attachment
Equipped with High-Lift boom relocation bracket
Boom ............................................................... 19´ 2 (5.85 m)
Arm .................................................................... 9´ 10 (3.0 m)
Operating Weights
Working weight with OROSHA side-entry forestry cab,
9 (229 mm) cab riser, high-wide undercarriage,
27.5 (700 mm) 2-bar shoes ............... 62,390 lbs (28 300 kg) (no processing tool)
For 15 (384 mm) cab riser ...................... Add 148 lbs (67 kg)
For high-narrow undercarriage ........ Subtract 147 lbs (67 Kg)
For Use in Harvester Processing Applications
Travel Dimensions
15´ 11˝ (4.87 m)
12´ 10˝ (3.91 m)
11´ 1˝ (3.37 m)
5´ 5˝
(1.66 m)
5´ 8˝
(1.72 m)9´ 8˝ (2.94 m)
2´ 4˝(705 mm)
32´ 2˝ (9.80 m)
1.5
˝(3
8.1
mm
)4
´ 7
˝(1
.40
m)
2´ 4˝(700 mm)
22´ 6˝ (6.86 m)
10
´ 3
˝ (3
.13
m)
12
´ 2
˝ (3
.70
m)
10
´ 1
1˝
(3.3
3 m
)
High Wide Transport Dimensions
High Narrow Transport Dimensions9´ 8˝
(2.94 m)
9´ 2˝
(2.79 m)
11´ 11˝
(3.64 m)
11´ 5˝
(3.50 m)
Working Ranges
5
0
-5
-10
-15 ft.
5
10
15
20
25
30
35
40 ft.
1015202530
A
C
D
E
B
22022
Machine equipped with
C
D
E
1. Lifting capacities shown should not be exceeded. Weight
of all lifting accessories must be deducted from the
above lifting capacities.
2. Lifting capacities are based on machine standing on firm,
uniform supporting surface. User must make allowances
for job conditions such as soft or uneven ground.
3. Lifting capacities shown do not exceed 75% of
minimum tipping loads or 87% of hydraulic capacities.
Capacities marked with an asterisk (*) are limited by
hydraulic capacities.
4. Least stable position is over the side.
5. Operator should be fully acquainted with the Operator’s
Manual & Operating Safety Booklet, furnished by LBX
before operating the machine.
6. Capacities apply only to the machine as originally
manufactured and normally equipped by LBX Company LLC.
Notes: Lifting capacities
9´ ´
9´ ´
Radius of Load
Cap at Max Reach
End Side End Side End Side End Side End Side End Side End Side
9.14 m (kg)
10,600* 10,600* 7,100* 7,100*
4 808* 4 808* 3 221* 3 221*
7.62 m (kg)
12,000* 12,000* 10,300* 10,300* 6,550* 6,550*
5 443* 5 443* 4 672* 4 672* 2 971* 2 971*
6.10 m (kg)
15,600* 15,600* 14,750* 14,750* 12,050* 12,050* 6,950* 6,950* 6,350* 6,350*
7 076* 7 076* 6 690* 6 690* 5 466* 5 466* 3 152* 3 152* 2 880* 2 880*
4.57 m (kg)
25,450* 25,450* 21,050* 21,050* 17,450* 17,450* 14,100* 14,100* 10,600* 10,600* 6,350* 6,350*
11 544* 11 544* 9 548* 9 548* 7 915* 7 915* 6 396* 6 396* 4 808* 4 808* 2 880* 2 880*
3.05 m (kg)
36,500* 36,500* 25,400* 25,400* 19,500* 19,500* 16,200* 15,500 12,500* 12,000 6,500* 6,500*
16 556* 16 556* 11 521* 11 521* 8 845* 8 845* 7 348* 7 031 5 670* 5 443 2 948* 2 948*
1.52 m (kg)
20,900* 20,900* 28,250* 28,250* 20,950* 20,400 16,850* 15,050 13,550* 11,750 6,800* 6,800*
9 480* 9 480* 12 814* 12 814* 9 503* 9 253 7 643* 6 827 6 146* 5 330 3 084* 3 084*
Ground lbs Line (kg)
11,400* 11,400* 22,150* 22,150* 28,650* 28,650* 21,300* 19,800 16,900* 14,750 12,350* 11,600 7,350* 7,350*
5 171* 5 171* 10 047* 10 047* 12 995* 12 995* 9 662* 8 981 7 666* 6 690 5 602* 5 262 3 334* 3 334*
-1.52 m (kg)
18,550* 18,550* 28,200* 28,200* 27,700* 27,700* 20,800* 19,500 16,250* 14,550 8,300* 8,300*
8 414* 8 414* 12 791* 12 791* 12 565* 12 565* 9 435* 8 845 7 371* 6 600 3 765* 3 765*
3.05 m (kg)
33,350* 33,350* 24,500* 24,500* 18,600* 18,600* 13,700* 13,700* 10,250* 10,250*
15 127* 15 127* 11 113* 11 113* 8 437* 8 437* 6 214* 6 214* 4 649* 4 649*
Radius of Load
Cap at Max Reach
End Side End Side End Side End Side End Side End Side End Side
9.14 m (kg)
10,600* 10,600* 7,100* 7,100*
4 808* 4 808* 3 221* 3 221*
7.62 m (kg)
12,000* 12,000* 10,300* 10,300* 6,550* 6,550*
5 443* 5 443* 4 672* 4 672* 2 971* 2 971*
6.10 m (kg)
15,600* 15,600* 14,750* 14,750* 12,050* 12,050* 6,950* 6,950* 6,350* 6,350*
7 076* 7 076* 6 690* 6 690* 5 466* 5 466* 3 152* 3 152* 2 880* 2 880*
4.57 m (kg)
25,450* 25,450* 21,050* 21,050* 17,450* 17,450* 14,100* 14,100* 10,600* 10,600* 6,350* 6,350*
11 544* 11 544* 9 548* 9 548* 7 915* 7 915* 6 396* 6 396* 4 808* 4 808* 2 880* 2 880*
3.05 m (kg)
36,500* 36,500* 25,400* 25,400* 19,500* 19,500* 16,200* 16,200* 12,500* 12,500* 6,500* 6,500*
16 556* 16 556* 11 521* 11 521* 8 845* 8 845* 7 348* 7 348* 5 670* 5 670* 2 948* 2 948*
1.52 m (kg)
20,900* 20,900* 28,250* 28,250* 20,950* 20,950* 16,850* 15,950 13,550* 12,450 6,800* 6,800*
9 480* 9 480* 12 814* 12 814* 9 503* 9 503* 7 643* 7 235 6 146* 5 647 3 084* 3 084*
Ground lbs Line (kg)
11,400* 11,400* 22,150* 22,150* 28,650* 28,650* 21,300* 21,050 16,900* 15,600 12,350* 12,250 7,350* 7,350*
5 171* 5 171* 10 047* 10 047* 12 995* 12 995* 9 662* 9 548 7 666* 7 076 5 602* 5 557 3 334* 3 334*
-1.52 m (kg)
18,550* 18,550* 28,200* 28,200* 27,700* 27,700* 20,800* 20,700 16,250* 15,400 8,300* 8,300*
8 414* 8 414* 12 791* 12 791* 12 565* 12 565* 9 435* 9 389 7 371* 6 985 3 765* 3 765*
3.05 m (kg)
33,350* 33,350* 24,500* 24,500* 18,600* 18,600* 13,700* 13,700* 10,250* 10,250*
15 127* 15 127* 11 113* 11 113* 8 437* 8 437* 6 214* 6 214* 4 649* 4 649*
Lifting Capacities
Standard Equipment
® ®
Options
LBX Company is the proud maker of quality Link-Belt excavators and is located in Lexington, KY. www.lbxco.comLitho in USA 2/12 #LBX2200
® LBX and ® Link-Belt are registered trademarks. Copyright 2012. All rights reserved. We are constantly improving our products and therefore reserve the right to change designs and specifications.