© 2019 aveva group plc and its subsidiaries. all … awc na presentations day...types and symbols...
TRANSCRIPT
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
Presented by:
Session ID: EPC-10
Introduction to AVEVA Electrical and Instrumentation 15.2™
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
Ross Kilmurray, Product Manager
Electrical and Instrumentation Solutions
13/11/19 Version 1
For Internal and Partner Use Only
Agenda
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
INTRODUCTION TO AVEVA
ELECTRICAL & INSTRUMENTATION
15.2
1
2
3
4
5
Industry Challenges
A Unified Electrical and Instrumentation Solution
Product Scope
Business Value
Conclusions and questions
Industry Challenges
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
INTRODUCTION TO AVEVA ELECTRICAL AND INSTRUMENTATION
AVEVA Electrical and Instrumentation
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
Project Execution Challenges: Electrical and Instrumentation
• Difficulty exchanging data across multiple disciplines
• Inaccurate data, increasing risk and project delays
• Dependency on third-party solutions leading to increased overheads
• Issues enforcing standards risking high penalties
Companies are under constant pressure to execute complex capital engineering projects efficiently and safely. They are faced with many challenges including:
Electrical and Instrumentation disciplines are no exception to these challenges. There needs to be a more sophisticated approach to electrical and instrumentation data, and how it integrates with all other engineering disciplines, data and deliverables to deliver projects successfully. AT AVEVA we have the solution…
Procurement
Engineering
Construction
Control
Optimize
Asset Life CycleImprove Return On Capital
Operations Life CycleImprove Profitability
Maintain
Operate
Schedule
Plan
Handover
Fabrication
Engineering & Design
ProcessDesign
Commission &Startup
Capital Project Lifecycle
Process DesignPRO/II
Engineering Analysis
Simulation LifecycleSimCentral
3DAVEVA
E3D/BOCAD/Marine
2DAVEVA
PID/Diagrams/E&I
1DAVEVA
ENGINEERING
Cost Estimating
Unified
Engineering
Procurement, Materials,
Construction
AVEVA ERM
ContractsAVEVA ProCon
Field VerificationAVEVA LFM
Pipeline & Leak DetectionSIMSUITE
Unified
Project Execution
Project Cost Control/Planning
Enterprise Learning
Operating TrainingDYNSIM
ENGINEER, PROCURE, CONSTRUCT
Maximise Return on Capital with a CAPEX 4.0 Strategy
Lower total cost, time and risk in capital project engineering and execution
THE CAPITAL PROJECT
OWNER OPERATOR EPC
Reduce Project Execution Risk and Total Installed
Costs by 15%.
Win more and improve Margin by 50%
Procurement
Operate
Construction
Asset Life CycleImprove Return On Capital
Handover
Fabrication
Engineering & Design
ProcessDesign
Commission &Startup
Project Information Access & Collaboration AVEVA NET
Project Information Visualization AVEVA ENGAGE, AR/VR
Project Data Model AVEVA ISM
SIMULATE
DESIGN
EXECUTE
LEARN
MANAGE
SIMULATE DESIGN EXECUTE LEARN
MANAGE
AVEVAAsset Lifecycle Management
AVEVAAsset Visualization Services
AVEVAUnified Project Execution 2020
(UPE)1D-2DAVEVA
Engineering
AVEVA Engineering &
Design
AVEVAUnified Engineering 2020
(UE)
EPC 4.0
Some History….
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
6 development locations across 4
countries
Australia
UKPolandIndia
3.5 years of development 90 developers 10 Early Adopter
Customers
Taking two existing applications
To one new state-of-the art solution
A Unified Electrical and Instrumentation Solution
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
INTRODUCTION TO AVEVA ELECTRICAL AND INSTRUMENTATION
AVEVA Electrical and Instrumentation
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
Unified Solution to reduce capital project errors, delays, cost and risk
• Unified engineering solution built on AVEVA’s Dabaconplatform, allowing multi-disciple teams to work concurrently where changes can be implemented, controlled and communicated quicker.
• Out-of-the-box model based on ISO 15926 for rapid deployment to create and manage electrical and instrumentation engineering data and deliverables, housing information that is critical to your business in multiple formats.
• Global Work Sharing allowing different departments to highlight
change reducing inaccurate data and errors.
• Direct integration with the 3D model for cable routing and equipment modelling. Information is passed between AVEVA Electrical & Instrumentation and AVEVA E3D to generate intelligent management cable schedules and reports.
ElectricalEngineer
Instrumentation Engineer
Direct Integration with AVEVA E3D
For Internal and Partner Use Only
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
Leveraging the AVEVA dabaconplatform and 3D viewer for context.
For Internal and Partner Use Only
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
View P&IDs with links to E&I data.
AVEVA Electrical & Instrumentation 15.2
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
High level features and functions
• Graphical View of Data
• Direct connection with 3D model
• E&I lists and datasheets (1D)
• Schematic drawings (2D)
• Flexibile & scalable• PML
• Configurable data model
• Flexible graphics
AVEVA Electrical and Instrumentation 15.2
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
E&I discipline common scope
User experience
• Class driven
• Contextual fluent ribbon
• Flexible grid and drawing views
• Proprietary graphics canvas for data entry and deliverable production
• Engineering items driven from catalogues and libraries
• Wiring rules used to apply design templates
• Automatic signal propagation
AVEVA Electrical and Instrumentation 15.2
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
Libraries
• Cable glands
• Cable gland adapters
• Cable lugs
• Cable plugs & sockets
• Cable transit parts
• Devices
• Enclosures
• Installation details & hookups (including parts)
• Instruments
• IO Modules
• Motors
• Wiring rules
• Compartments
For Internal and Partner Use Only
Deliverables linked with the underlying engineering data
of surveyed E&I engineers list linking of underlying engineering data with 2D deliverables as their most important software
feature.
In-built graphics canvas with fully customisable drawing types and symbols connected to the underlying data model. This also removes the reliance on 3rd party CAD applications.
‘Drag-and-drop’ of engineering objects onto a 2D canvas ensuring data consistency between the schematic and the underlying engineering data.
Automatic drawing production supported alongside manual creation of complex engineering diagrams
Superior to competition using ‘reports’ or links to CAD applications to create Deliverables. This results in the inability to create complex drawings.
96% of surveyed
customers are required to produce ‘one of a kind’ complex drawings56%
1 Single Line Diagram (SLD)for MCC
2 Load schedule for motors from MCC-001
SLDs Loops Schedules Schematics
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
For Internal and Partner Use Only
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
Customizable grids within grid explorer. Configured out of the box with configuration project.
Automatically produced graphical view of connectivity model.
For Internal and Partner Use Only
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
Customizable drawing types. Create drawing types with symbols associated to the class model.
For Internal and Partner Use Only
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
New ‘Schematics graphics canvas’. Removes 3rd party drafting application. Directly linked with underlying data. Automatic production of terminations etc.
For Internal and Partner Use Only
Data entry, consistency and validation
69% of surveyed E&I engineers say it is
critical/very important to enable multiple naming conventions on a project
Project standards and mandatory design rules resulting in consistency across engineering data and deliverables. Customisation of project setup available for various design standards.
Multiple and complex naming conventions supported to allow tag management of all engineering objects e.g. KKS, ISA
Configurable data validation including units of measure, pick lists, naming rules etc.
43% of surveyed customers say it is critical to
enforce design standards
69%
43%
3 Motor Creation 4 Datasheet for Motor with data validation
Tagging Rules Configuration Standards
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
For Internal and Partner Use Only
Accurate schedules and reports utilising multiple data sources
of surveyed customers still rely on Excel to produce cable schedules
Direct integration with the 3D model for cable routing and equipment modelling. Update the cable schedule with design lengths taken from the 3D model, ensuring accuracy in cable lengths and routing information
Cable sizing to any design standard using external Excel macros to perform calculations. Accurate design lengths, installation method and cable layout from the 3D model used to perform cable sizing
Reduced checking time as reports are produced from validated data
Integration with procurement tools enabling full project lifecycle management of cables
6 out of 10 of surveyed customers
indicated that spending less time checking and validating design was one of their overall ‘top 3 priorities’
75%
5 Motor Cable
6 Integration with 3D
E3D Cables Integration Data
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
For Internal and Partner Use Only
Intuitive library driven ‘graphical engineering’
41% of respondents
cite being able to rapidly deploy a standard configuration as a ‘top 3’ priority related to E&I software
Configurable library data available to drive all equipment creation and specification
Template driven enclosure design. All containers of equipment can be designed as ‘enclosures’. Equipment can be placed graphically and saved to a library promoting accuracy and repeatability
Graphical engineering philosophy. The whole product has been designed with a ‘drag and drop’ graphical approach. The graphical views reference the underlying engineering data, providing an intuitive user experience, increasing efficiency and reducing manual errors
of surveyed customers indicated increasing overall data accuracy was one of their overall ‘top 3’ priorities related to E&I software
51%
Enclosure Library
Graphical Libraries TemplatesUser
friendly
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
For Internal and Partner Use Only
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
Flexible working environment. Explorers, grids, sub-grids, graphics.
For Internal and Partner Use Only
Unified Electrical & Instrumentation Engineering environment
of our customer base consider seamless collaboration across project disciplines as critically important
Electrical and instrumentation in a single environment removes discipline barriers and leverages common E&I workflows
Common configurable E&I data model allows the creation/modification of the class library. Out-of-the box data model based on ISO 15926
E&I Schematic diagrams can contain both electrical and instrumentation objects allowing the creation of complex deliverables
Signal creation available on any E&I object. Signal (I/O) list can be generated across entire E&I project
53% of survey
respondents would like to increase the quality of E&I deliverables
67%
MCC Control Signals
Unified E&I ISO 15926 Signals
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
For Internal and Partner Use Only
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
New intuitive wizards for increased efficiency.
Product Scope
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
INTRODUCTION TO AVEVA ELECTRICAL AND INSTRUMENTATION
For Internal and Partner Use Only
AVEVA Electrical & instrumentation 15.1
Electrical discipline scope
• Load flow calculations
• Calculations results in grids, reports, schedules and drawings
• Cable calculations using Excel macros
• To any sizing standard. Seamless interface with product.
• Electrical schedules and reports
• Equipment datasheets, load schedules
• Electrical schematics and drawings
• SLDs, Terminations, Motor schematics etc.
• Interface with ETAP for detailed calculations
• I/O management
• Logic diagrams (non-intelligent)
• Instrumentation schedules and reports
• Instrument lists, I/O lists, Instrument Datasheets etc.
• Instrumentation schematics and drawings
• Loop diagrams, Termination diagrams, Hookups etc.
• Interface with E3D for cable routing and tray layout
Instrumentation discipline scope
Common scope
• Management of all engineering data: Import, creation, tagging of all E&I equipment to any naming convention
• Interface with E3D for cable routing and tray layout: Round tripping of cable and routing data
• Out of the box data model with configuration project
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
Business Value
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
INTRODUCTION TO AVEVA ELECTRICAL AND INSTRUMENTATION
For Internal and Partner Use OnlyFor Internal and Partner Use Only
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
Business Value
• Unified platform ensuring real-time collaboration and
alignment between engineering disciplines
• Rapid project execution ensuring Capital Projects
delivered on schedule and within budget
• Reduction in delay and error related costs
• Reduction in man-hours and associated costs
• Increased quality in engineering deliverables ensuring a
smoother handover process
Roadmap
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
INTRODUCTION TO AVEVA ELECTRICAL AND INSTRUMENTATION
For Internal and Partner Use Only
AVEVA Electrical and Instrumentation 15.2 – Roadmap
15.2 EngineeringE&I market release
2020 2021
- E&I disciplines on AVEVA Engineering platform
- New Schematics Graphics Canvas
- TMS- ETAP interface - Functionality to match or
exceed SQL 12.1 SP4
- Automatic drawing production based on connectivity. Remove reliance on templates, more efficient drawing creation.
- Import of 2D schematics, import of loop diagrams, SLDs etc. from legacy tools/brownfield projects.
- IGE+XAO interface for 3D panel design. IGE+XAO user UX embedded within E&I 15.2. All data stored on Dabacon.
- Connection to IGE+XAO device catalogues (all major manufacturers)
- Circuit wiring diagrams. 3 line diagrams, motor schematics, panel wiring diagrams etc.
- Data Exchange with Schneider Electric ‘FLEX’ methodology
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
For Internal and Partner Use Only
AVEVA and IGE+XAO
© 2018 AVEVA Solutions Limited and its subsidiaries. All rights reserved.
ETAP, IGE+XAO Integration – Completing the electrical lifecycle
Network analysisCertified calculations
Protection sizingCable sizing
Cable schedulesTag management
3D integrationCable routing
BOMsSchematics
Etc.
Protection sizingWiring diagrams
eCatalogue access
2D Panel layouts3D Panel layoutsWiring diagrams
Internal panel wiring
Project lifecycle
Note: Items in red are for future development
For Internal and Partner Use Only
AVEVA and IGE+XAO
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
Architecture/Workflow
‘Enclosure concept’ within AVEVA E&I 15.2
Network analysisCertified calculations
3D Panel layoutsInternal panel wiring
Enclosure is a container for
devices/equipment etc. with no XYZ positioning. The
enclosure is a tagged item, containing sub-
equipment.
AVEVA Enclosure can be opened
within 15.2, using SEE Electrical 3D
UX. Hierarchy can be viewed and devices, cables
etc. can be positioned in 3D.
For Internal and Partner Use Only
AVEVA and IGE+XAO
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
Architecture/Workflow
‘Enclosure concept’ within AVEVA E&I 15.2
Metadata and 3D model stored on AVEVA Dabacon database
Equipment can be created within AVEVA 15.2…
…Or within SEE Electrical 3D UX
Items can be created in either UX, viewed in respective application UX.
SEE Web catalogueBoth applications/UX connected to SEE Web Catalogue.
For Internal and Partner Use Only
AVEVA & Schneider Electric FLEX (DCS config)
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
Configure Foxboro and Triconex systems from AVEVA E&I engineering data
Schneider Electric ‘FLEX’ methodologyRule/knowledge based system for configuring systems
AVEVA E&I used to create I/O, wiring, cabling, equipment etc.
Data round-tripping
Questions?
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.
INTRODUCTION TO AVEVA ELECTRICAL AND INSTRUMENTATION
linkedin.com/company/aveva
@avevagroup
ABOUT AVEVA
AVEVA is a global leader in engineering and industrial software driving digital transformation across the entire asset and operational l ife cycle of capital -intensive industries.
The company’s engineering, planning and operations, asset performance, and monitoring and control solutions deliver proven results to over 16,000 customers across the globe. Its customers are supported by the largest industrial software ecosystem, including 4,200 partners and 5,700 certified developers. AVEVA is headquartered in Cambridge, UK, with over 4,400 employees at 80 locations in over 40 countries.
aveva.com
© 2019 AVEVA Group plc and its subsidiaries. All rights reserved.