פרש כאפ 17.11.19 · web view4. place the green cartridge into the opening on the right,...

פרש כאפ 17.11.19

(User Manual)

Introduction

Thank you for choosing Freshcup as the solution for a constant supply of clean cups at home or at work.

The Freshcup is a brand-new product developed in Israel after eight years of research and development by top experts in the fields of engineering, chemistry, and electronics.

A great deal of thought was devoted to analyzing the needs of the potential user in order to develop a product which anyone could use simply and efficiently to wash cups at home or at work.

Tests carried out at independent laboratories have shown that cups washed in the Freschup are sanitized and detergent-free, using an innovative, effective method, patented worldwide. The Freshcup detergent, is an environmentally-friendly product, especially developed for this

machine and conforming to the harshest environmental standards - the detergent products biodegrade and do not remain in the water.

Freshcup allows thorough cleaning and sanitizing using a brief, easy-to-use cycle, enabling the cleaning of cups, silverware, and dishes, and can be used to clean and sanitize baby bottles using an easy and simple cycle

If you have any questions, problems, or malfunctions, please contact our service department at the phone number 03-6820030 (multi-extension phone).

(Contents)

PageDescription of the Freshcup _________________________1Operating Instructions _______________________________ 3Maintenance ______________________________________ 7Detecting and Handling Malfunctions____________________ 8Installation ________________________________________ 11

Manufacturer:

MNL LTD

19 Timna, Holon

(Description of the Freshcup)

Drying surface

Control Panel

Revolving partition

Spoon basket

Dish rack

(2)

( 11)

(Description of the Freshcup)

Water entry

Main switch and power cable connection

Drain pipe connection

(Operating instructions)

For first time operation:

1. Press the main operating switch to the ON position (Position 1). The Freshcup will carry out a number of rinse cycles.

2. Remove the machine's cover.

3. Place the yellow cartridge into the opening on the right, marked with a yellow ring, rotating it until you find the right direction for insertion (see detailed instructions on Page 7 under the heading "Replacing the Detergent Cartridge").

4. Place the green cartridge into the opening on the right, marked with a green ring, rotating it until you find the right direction for insertion (see detailed instructions on Page 7 under the heading "Replacing the Detergent Cartridge"). Your Freshcup is ready to operate.

After placing the cups and selecting the desired cycle button, the Freshcup will start to operate automatically. Once the cycle is complete, your cups will be clean and sanitized.


Placing dishes in the Freshcup:

Remove foreign objects (lemon slices, cigarette butts, paper, etc.) from the cup/glass.

Wash out the 'mud' remaining of black coffee.

Invert the dirty mug, and place it on the cup rack (the mouth of the cup should be face-down).

Note!

It is recommended to place the cups so that handles are turned to the sides.

Tall glasses may be unstable when inverted - be careful!

Spoons and cutlery

Place the spoons or cutlery in the specially designed spoon basket, facing upwards.

Saucers and plates

Place the saucer or plate on the dish rack against the two protrusions, so that the plate's face is facing outwards (see illustration).

Baby bottles

1. Place the bottle neck down.

2. Place the nipple on the dish rack, placing a glass on top of it.

3. Choose the HIGH setting to wash the bottle.

4. Repeat the action of choose continuous action to wash a number of bottles.

.


Choose cycle

NORMAL

To wash a cup that has been standing less than 6 hours, and is without any traces of grease (soup/cocoa), use this cycle. This cycle is default, and after each wash, the machine resets to this cycle (ECO).

(Soap-L Clean-Rinse l Eco l High RotateStop l FailWash l NextSoap-R)

Rinse

Press the left button to choose the Rinse cycle.

Every press moves the choice to a different cycle.

The machine shall rinse the dishes when the light burns under the word Rinse.

This is intended for washing cups that have been left standing for up to 2 hours.


HIGH

To wash dishes with grease, cups that have been left standing for over 6 hours, baby bottles, and more difficult dirt, choose the HIGH cycle. This cycle is longer and generates steam during cleaning to achieve maximum cleanliness.



Double cycleFor a larger load of dishes – place the dishes on the rack and place the triangular control button (remember to choose the preferred washing cycle). After the partition rotates, choose the preferred washing cycle, insert additional dishes and press the triangular control button. The continuous cycle bulb will light up. When the first cycle is completed, the partition will rotate to wash the dishes continuously. You can wash an unlimited number of dishes this way.

.


Removing the dishesTo remove the dishes remaining inside the Freshcup, press the Rotate button, causing the partition to spin, at which point you can remove the cups.Recommendation: Do not leave dirty dishes overnight. Rinse them in the short cycle as soon as they are used, thus saving on water and detergent.

(Soap-L Clean-Rinse l Eco l High RotateStop l FailWash l NextSoap-R)FOR PROPER OPERATION AND PRODUCT LIFE QUALITY

Make sure that there are no cigarette butts or other solid objects, such as lemon slices, olive seeds, etc. clinging to any of the dishes placed on the rack.

Make sure that the cup rack is firmly in place.

Do not pile up more than one level dishes at a time on the drying surface.

Do not wash the Freshcup's exterior with water.

Detergent out:Should one of the detergent types run out, the machine shall perform several rinse cyclesw, and the partition will rotate to remove the dishes. The light notifying you to replace the yellow cartridge on the right or the green one on the left shall turn on.


(Maintenance)

When the yellow detergent cartridge is out, the aforementioned yellow light on the right shall turn on. Remove the cups from the drying rack and then remove the drying rack itself. Should there be a cupboard over the machine that interferes with the insertion of the detergent, gently move the machine forward so as to allow the cartridge to be inserted (return the machine to its place after replacing the cartridge. An opening for connecting the cartridge is located on the right. Insert the new cartridge into its opening, selecting the correct angle for the cartridge. Do not force the cartridge in – this may cause damage – but

Try to choose the correct direction, by rotating the cartridge against the feed opening until it enters the device's feed opening easily. Push the cartridge completely into place, enabling a the yellow cartridge to empty itself into the Freshcup's interior container.

Push the partition into the center of the machine and check whether detergent is coming out of the sprinkler. If it is, this is a sign that the lower container is full. Remove the cartridge.

Should there be remaining detergent, it will be possible to use it for additional refilling. After the end of refilling, the cartridge should be removed from the machine and the rack replaced. Should the green detergent be out, the green light shall light up on the left side of the operation panel. Use the same process as you would when refilling the yellow detergent.

Caution!

The yellow cartridge does not fit the opening for the green cartridge, and vice versa. Forcing the yellow cartridge into the opening intended for the green cartridge may damage the machine and completely disrupt its operations. After refilling the detergent, remove the empty cartridges, replace the drying rack, and reset the Freshcup by turning it on and off using the switch on its rear.

ללא הפרעה. (3) (2)

(1)

(Maintenance)

Caution!· The Freshcup detergent is a hazardous material and must be handled with care. Do not open or puncture the cartridges. In the event of a leak wash with water and dry.· Do not remove cartridge caps.· The use any detergent other than that provided by the manufacturer or the licensed distributor is not permitted as it may damage and even disable the machine, and the company is not liable should it be revealed that use of any non-original detergent was made.· Do not puncture the cartridges.· Do not switch the cartridges while refilling the machine – the yellow cartridge is intended for the machine's right side, where the feed opening is marked with yellow, and the green cartridge is intended for the machine's left size, where the opening is marked green.Recommendation:Store the containers in your possession (both empty and full) with the openings facing upwards. Should any detergent be spilled, was well with running water.Cleaning:The front receptacle should be periodically cleaned.To clean the receptacle:1. Remove the spoon basket.2. Lift the rack.3. Remove the rack and put it aside.4. In this state the receptacle can be cleaned from leftover dirt. Clean the front receptacle with water and soap.5. Replace the spoon basket and triangle.Note:Avoid cleaning the Freshcup's exterior with running water – the machine's body should be cleaned with a moist rag and clean water only.Do not attempt to repair the machine yourself! Our service personnel are at your service at all times under the warranty or under your extended service contract.

In case of malfunction and after carrying out the following checks, call our local service department at 03-5777888.In any event of a malfunction the Error bulb will light up.

The revolving partition is not closed· Press the activation switch, or use the main operating switch at the machine's back to turn it on and off.· Check if a foreign objects is preventing the rotation.

· Check if the rack is placed properly and is not impeding the rotation.· If you have not found a solution, call a technician.Foreign object falling into the accumulation receptacleIn the event that a foreign object falls into the accumulation receptacle, it can be removed by following this procedure:1. Remove the spoon basket and raise the rack.2. Rotate the partition by pushing it on one side and leave it half-turned.3. If the partition does not rotate, check the rotation as per the previous section.4. If the partition cannot be turned, call a technician.5. Check if there is a foreign body in the receptacle, and remove it if there is one.6. Rotate the partition into its previous position.7. Replace the rack and spoon basket.8. Place the activation switch or switch the machine on or off.Sprinkler stuck/caught1. Turn the machine on and off using the main switch. The Freshcup will carry out a number of rinse cycles.2. Remove the rack and the small triangle.3. Rotate the partition by pushing it on one side and leave it half-turned.4. Check if there is a foreign body in the receptacle, and remove it if there is one. If the sprinkler remains stuck on one side, push it towards the center (one click).5. If the problem persists, call a technician.6. Replace the rack and the small triangle.7. Turn the machine back on using the main switch.8. The Freshcup will carry out a number of rinse cycles.Error bulb is flashing – lack of water pressure1. Check if the water tap connected to the water inlet hose is open. Check the building’s water supply has not been shut off. 2. If the tap is open and the building still has running water, turn off the appliance at the main operating switch and turn off the tap.3. In order to release the pressure in the hose, turn the Freshcup at the main switch. The Freshcup will stop working because of lack of water pressure.4. Disconnect the water inlet hose from its connection to the Freshcup, open the tap and check the water pressure in the hose (continuous flow).

Note!Whenever connecting and disconnecting the water hose, make sure that there is a rubber sealing washer in the hose connection to the (Detecting and handling malfunctions) Freshcup.

(איתור וטיפול בתקלות)

5. If the hose is not clogged, remove the filter that is in the coupling connection of thewater inlet hose, rinse the filter in water, and return it to its place.

6. Connect the water hose and open the tap. (Make sure the hose is not leaking at the point ofconnection).

7. Turn on the main operating switch - the FRESHCUP SYSTEM will carry out ten rinse cycles.

1. After performing these actions, if the malfunction indicating lack of water pressure persists, call the service technician.

(10)

( 11)

(Installation)

Installation should be done by a qualified plumber only. If none are available, callthe company for installation.Installation requirements:· Power supply – an electrical outlet at a maximum distance of 1.5 meters from the location of the Freshcup.· Water supply – mininimum water pressure of 1 bar and maximum water pressure of 6 bars at a maximum distance of 1.5 meters from the location of the Freshcup.· The Freshcup may be connected to a water heater.· Installation surface – a countertop or shelf measuring 40 x 40 cm and capable of supporting a weight of 20 kg.· Drainage - a sink or drainage point must be located no more than 1.5 meters from the Freshcup, with the drainage point being lower than the point where the hose connects to the Freshcup.Installation instructions:1. Place the Freshcup on the overflow tray.2. Install a main water shutoff walve at the connection of the water supply to the Freshcup.3. Connect the main water hose to the water source and the Freshcup (ensure that washers are available used.)4. Connect one end of the drain hose to the water drainage outlet o the Freshcup and the other end to the drainage point. Attach it with appropriate clips to avoid its disconnection while in use.5. Open the water cup.6. Connect the Freshcup to the electric outlet.7. Install dish racks including spoon rack (as illustrated in the maintenance section).8. Turn on the main switch – blue lights indicate the machine is working. It will carry out several rinse cycles.9. Insert the detergent cartridges into their openings and empty their entire contents into the machine. Note that each cartridge must be emptied correctly – the yellow cartridge on the right and the green cartridge on the left.10. Place the cup tray in the upper part.11. The machine is ready for use.

Countertop installation – draining into the sinkPlace the drain outlet hose in the sink in a straight unobstructed line with the opening placed downwards. Note: Draining into the sink may dirty the sink. Moreover, the opening must be turned downwards and be well secured so that dirty water does not flow out over the countertop.Under-the-counter installation:Drill a hole in the countertop (to allow for passage of the water and drainage pipes) matching the diameter of the hoses you plan to use.Install a coupling adapter for the drain outlet hose at the point where the sink connects with the siphon if you are using under-the-counter installationEnsure that the drainage hose is not folded and that it is on a continuous tilt throughout its route. Folds may cause obstructions and flooding both within and outside the dishwasher. (התקנה)

Freshcup technical data:

Container volume

Width

Height

Depth

Empty weight

Output

Input voltage

1.45 liters

32 cm

45 cm

40 cm

5kg

2200 W

Minimum 13 ampere fuse

230 V

Water connections: In: 3/4" Out: 19mm exterior diameter washing machine hose (hose arrives with a washer with an interior diameter of 19mm).

פרש כאפ 17.11.19 · web view4. place the green cartridge into the opening on the right,...

Documents